The effect of succeeding crop and level of N fertilization on N leaching after break-up of grassland

Depending on soil and management, ploughing up grassland for use as arable land can lead to an increase in the release of mineralized nitrogen and a high risk of nitrogen leaching during winter. The amount of N leaching is also dependent on the N efficiency of following crops and the level of N fertilization.In a field experiment in northwest Germany permanent grassland was ploughed and used as arable land. The experiment was conducted over 2 years at three sites and investigated two main factors: (i) succeeding crops, either spring barley (and catch crop)–maize or silage maize–maize; and (ii) N-fertilization either nil or moderate (120 kg N ha⁻¹ for barley or 160 kg for maize). Plant yields, the soil mineral nitrogen (SMN) content and the nitrate leaching losses over winter were determined. On average for the 2-year period, the SMN in autumn and the nitrate leaching losses during winter for the rotation barley–maize were 76 kg ha⁻¹ SMN and 81 kg N ha⁻¹ N leaching losses, and for maize–maize they amounted to 108 and 113 kg ha⁻¹, respectively. The SMN and N leaching losses for the plots with no N fertilizer were 49 and 52 kg N ha⁻¹ and for the plots fertilized at a moderate N level they were 135 and 142 kg N ha⁻¹, respectively.We conclude that although the extent of nitrate leaching is influenced by the site conditions and management of the grassland prior to ploughing, the management after ploughing is the decisive factor. The farmer can significantly reduce nitrate leaching with his choice of succeeding crop and the amount of N fertilization.     

Analysing the energy balances of sugar beet cultivation in commercial farms in Germany

Energy balances are increasingly used to assess the energy efficiency and productivity of agricultural production. In this study, energy balances for sugar beet cultivation in commercial farms in Germany were calculated. 109 farmers with 285 fields were interviewed about the sugar beet cultivation 2004. The energy input and the energy output were calculated with standardised balance-sheet approaches and energy equivalents. Calculated energy balance parameters were the energy gain (energy output less input), the output–input ratio (energy output versus input) and the energy intensity (energy input versus natural yield measured in Grain Equivalents). A factor analysis was performed to explain the variation of the energy balance parameters between the fields by crucial factors for energetic efficiency and productivity. Fields with similarly valued factors were grouped into common clusters by a cluster analysis and a discriminant analysis. The influence of specific growing conditions and cultivation methods on the energy balances were examined for the clusters.Total energy input (median: 17.3 GJ ha⁻¹), energy output (261.7 GJ ha⁻¹), energy gain (244.6 GJ ha⁻¹), output–input ratio (15.4) and energy intensity (87.4 MJ GE⁻¹) revealed a significant variation. The total energy input was significantly lower and the energy yield was significantly higher than in previous studies. Thus, the energy gain and the output–input ratio have clearly risen compared to earlier studies. Today, sugar beet cultivation is energetically more productive and efficient than the cultivation of many other arable crops in Middle Europe.The intensity of the cultivation measures irrigation, catch crop cultivation, tillage and N fertilisation as well as the management of all cultivation measures and the site were determined as crucial factors for energy efficiency and productivity. The intensity of the different cultivation measures influenced the total energy input significantly, but no influence on the energy output was determined. In contrast, the cultivation management (quality and adaptation of cultivation measures) was mainly responsible for the energy output. Whereas the cultivation management mostly explained the energy gain, the factor cultivation management and the factors representing cultivation intensity together were responsible for the output–input ratio.Cluster and discriminant analysis resulted in the formation of 13 clusters. For clusters with an above-average energy gain and output–input ratio, the intensity and in particular the management of cultivation measures were essential for optimising the energy balance.     

Tillage,cover crops,and nitrogen fertilization effects on soil nitrogen and cotton and sorghum yields

Sustainable soil and crop management practices that reduce soil erosion and nitrogen (N) leaching, conserve soil organic matter, and optimize cotton and sorghum yields still remain a challenge. We examined the influence of three tillage practices (no-till, strip till and chisel till), four cover crops {legume [hairy vetch (Vicia villosa Roth)], nonlegume [rye (Secaele cereale L.)], vetch/rye biculture and winter weeds or no cover crop}, and three N fertilization rates (0, 60–65 and 120–130 kg N ha⁻¹) on soil inorganic N content at the 0–30 cm depth and yields and N uptake of cotton (Gossypium hirsutum L.) and sorghum [Sorghum bicolor (L.) Moench]. A field experiment was conducted on Dothan sandy loam (fine-loamy, siliceous, thermic, Plinthic Paleudults) from 1999 to 2002 in Georgia, USA. Nitrogen supplied by cover crops was greater with vetch and vetch/rye biculture than with rye and weeds. Soil inorganic N at the 0–10 and 10–30 cm depths increased with increasing N rate and were greater with vetch than with rye and weeds in April 2000 and 2002. Inorganic N at 0–10 cm was also greater with vetch than with rye in no-till, greater with vetch/rye than with rye and weeds in strip till, and greater with vetch than with rye and weeds in chisel till. In 2000, cotton lint yield and N uptake were greater in no-till with rye or 60 kg N ha⁻¹ than in other treatments, but biomass (stems + leaves) yield and N uptake were greater with vetch and vetch/rye than with rye or weeds, and greater with 60 and 120 than with 0 kg N ha⁻¹. In 2001, sorghum grain yield, biomass yield, and N uptake were greater in strip till and chisel till than in no-till, and greater in vetch and vetch/rye with or without N than in rye and weeds with 0 or 65 kg N ha⁻¹. In 2002, cotton lint yield and N uptake were greater in chisel till, rye and weeds with 0 or 60 kg N ha⁻¹ than in other treatments, but biomass N uptake was greater in vetch/rye with 60 kg N ha⁻¹ than in rye and weeds with 0 or 60 kg N ha⁻¹. Increased N supplied by hairy vetch or 120–130 kg N ha⁻¹ increased soil N availability, sorghum grain yield, cotton and sorghum biomass yields, and N uptake but decreased cotton lint yield and lint N uptake compared with rye, weeds or 0 kg N ha⁻¹. Cotton and sorghum yields and N uptake can be optimized and potentials for soil erosion and N leaching can be reduced by using conservation tillage, such as no-till or strip till, with vetch/rye biculture cover crop and 60–65 kg N ha⁻¹. The results can be applied in regions where cover crops can be grown in the winter to reduce soil erosion and N leaching and where tillage intensity and N fertilization rates can be minimized to reduce the costs of energy requirement for tillage and N fertilization while optimizing crop production.     

Growth and yield of winter wheat in the first 3 years of a monoculture under varying N fertilization in NW Germany

Different preceding crops interact with almost all husbandry and have a major effect on crop yields. In order to quantify the yield response of winter wheat, a field trial with different preceding crop combinations (oilseed rape (OSR)–OSR–OSR–wheat–wheat–wheat), two sowing dates (mid/end of September, mid/end of October) and 16 mineral nitrogen (N) treatments (80–320 kg N ha⁻¹) during 1993/1994–1998/1999, was carried out at Hohenschulen Experimental Station near Kiel in NW Germany. Single plant biomass, tiller numbers m⁻², biomass m⁻², grain yield and yield components at harvest were investigated. During the growing season, the incidence of root rot (Gaeumannomyces graminis) was observed. Additionally, a bioassay with Lemna minor was used to identify the presence of allelochemicals in the soil after different preceding crops.Averaged over all years and all other treatments, wheat following OSR achieved nearly 9.5 t ha⁻¹, whereas the second wheat crop following wheat yielded about 0.9 t ha⁻¹ and the third wheat crop following 2 years of wheat about 1.9 t ha⁻¹ less compared with wheat after OSR. A delay of the sowing date only marginally decreased grain yield by 0.2 t ha⁻¹. Nitrogen fertilization increased grain yield after all preceding crop combinations, but at different levels. Wheat grown after OSR reached its maximum yield of 9.7 t ha⁻¹ with 210 kg N ha⁻¹. The third wheat crop required a N amount of 270 kg N ha⁻¹ to achieve its yield maximum of 8.0 t ha⁻¹.Yield losses were mainly caused by a lower ear density and a reduced thousand grain weight. About 4 weeks after plant establishment, single wheat plants following OSR accumulated more biomass compared to plants grown after wheat. Plants from the third wheat crop were smallest. This range of the preceding crop combinations was similar at all sampling dates throughout the growing season.Root rot occurred only at a low level and was excluded to cause the yield losses. The Lemna bioassay suggested the presence of allelochemicals, which might have been one reason for the poor single plant development in autumn.An increased N fertilization compensated for the lower number of ears m⁻² and partly reduced the yield losses due to the unfavorable preceding crop combination. However, it was not possible to completely compensate for the detrimental influences of an unfavorable preceding crop on the grain yield of the subsequent wheat crop.     

Influence of sulfur on apparent N-use efficiency,yield and quality of oilseed rape (Brassica napus L.) grown on a calcareous soil

In the Lorraine region, major soils used for winter oilseed rape are calcareous. Across two pot and two field experiments, we studied the influence of sulfur applied at different levels on apparent N-use efficiency (ANU), yield, glucosinolate (GLS) and oil content of seeds. The soil received a constant dose of 200 kg N ha⁻¹ as ammonium nitrate, urea or cow slurry and three levels of S: 0, 30 and 75 kg ha⁻¹ as ammonium thiosulfate (ATS), MgSO₄ or ATS plus MgSO₄. Apparently, oilseed rape is a N-inefficient crop as revealed by low ANU values which varied within 36 and 53% from field experiment versus 25 and 61% under controlled conditions. In both cases, S additions improved N-use efficiency only at the highest dose of 75 kg S ha⁻¹, which is not attained by ATS with 35 kg S ha⁻¹ (10% v/v). S fertilization increased the GLS contents that were found to be negatively correlated with plant N/S uptake ratios observed at maturity. The most important increase in GLS content by 52% was noted with cow slurry in the pot experiment. But, as a whole, the GLS levels remain below the European norm of 18 μmol g seed⁻¹. Moreover, the oil content (% DM) of seeds decreased (but the total production increased) when the soil was fertilized with N and with or without S. The results showed that N and S nutrition during the growth were tightly linked. Their interactions, as reflected by plant uptake, are synergistic at optimum rates and antagonistic at excessive levels of one of the both. Collectively, the results indicate that S fertilization is required to improve N-use efficiency and thereby maintaining a sufficient oil level and fatty acid quality.     

Effect of irrigation and nitrogen fertilization on the production of biogas from maize and sorghum in a water limited environment

The expansion of biogas production from anaerobic digestion in the Po Valley (Northern Italy) has stimulated the cultivation of dedicated biomass crops, and maize in particular. A mid-term experiment was carried out from 2006 to 2010 on a silt loamy soil in Northern Italy to compare water use and energy efficiency of maize and sorghum cultivation under rain fed and well-watered treatments and at two rates of nitrogen fertilization. The present work hypothesis were: (i) biomass sorghum, for its efficient use of water and nitrogen, could be a valuable alternative to maize for biogas production; (ii) reduction of irrigation level and (iii) application of low nitrogen fertilizer rate increase the efficiency of bioenergy production. Water treatments, a rain fed control (I0) and two irrigation levels (I1 and I2; only one in 2006 and 2009), were compared in a split–split plot design with four replicates. Two fertilizer rates were also tested: low (N1, 60 kg ha⁻¹ of nitrogen; 0 kg ha⁻¹ of nitrogen in 2010) and high (N2, 120 kg ha⁻¹ of nitrogen; 100 kg ha⁻¹ of nitrogen in 2010). Across treatments, sorghum produced more aboveground biomass than maize, respectively 21.6 Mg ha⁻¹ and 16.8 Mg ha⁻¹ (p < 0.01). In both species, biomass yield was lower in I0 than in I1 and I2 (p < 0.01), while I1 and I2 did differ significantly. Nitrogen level never affected biomass yield. Water use efficiency was generally higher in sorghum (52 kg ha⁻¹ mm⁻¹) than in maize (38 kg ha⁻¹ mm⁻¹); the significant interaction between crop and irrigation revealed that water use efficiency did not differ across water levels in sorghum, whereas it significantly increased from I0 and I1 to I2 in maize (p < 0.01). The potential methane production was similar in maize and sorghum, while it was significantly lower in I0 (16505 MJ ha⁻¹) than in I1 and I2 (21700 MJ ha⁻¹). The only significant effect of nitrogen fertilization was found in the calculation of energy efficiency (ratio of energy output and input) that was higher in N1 than in N2 (p < 0.01). These results support the hypothesis that (i) sorghum should be cultivated rather than maize to increase energy efficiency, (ii) irrigation level should replace up to 36% of ETr and (iii) nitrogen fertilizer rate should be minimized to maximize the efficiency in biomass production for anaerobic digestion in the Po Valley.     

Hay yield and nitrogen harvest in smooth bromegrass mixtures with alfalfa and red clover in relation to nitrogen application

An experiment was conducted in order to investigate hay yield and nitrogen harvest in binary smooth bromegrass (Bromus inermis Leyss cv. Tohum Islah) mixtures with alfalfa (Medicago sativa L. cv. Kayseri) and red clover (Trifolium pratense L. cv. Tohum Islah) in Erzurum, Turkey for 5 years between 1991 and 1995. The Hay yield, nitrogen harvest, protein concentration and land equivalent ratio (LER) in the mixtures with alternating rows of 1:1, 2:1 and 1:2 of smooth bromegrass with alfalfa and red clover were compared to those in pure legume stands without any N-fertilizer application or pure smooth bromegrass stands that received 0, 50, 100 and 150 kg ha⁻¹ N. The mixtures had no N fertilization apart from 40 kg N ha⁻¹ in the establishment year. The dry matter production in all the mixtures receiving no N fertilizer application was higher than in pure legume stands. Pure grass stands were sustained only with the application of 150 kg ha⁻¹ N. The highest hay yields were obtained from the mixtures of smooth bromegrass (Sb) with red clover (Rc) (2Rc 1Sb) (14.65 t ha⁻¹) and with alfalfa (A) (1A 1 Sb) (14.49 t ha⁻¹). Although N application increased Sb yields in pure stands, the highest yields obtained with N fertilization were still lower than the yields in the mixtures without N application. The superiority of the mixtures was also reflected by their large N harvests (e.g. 355.9 kg N ha⁻¹ in 2Rc 1Sb plots) compared to pure Rc (317.8 kg N ha⁻¹), pure A (294.3 kg N ha⁻¹) and pure Sb stands that received 150 kg N ha⁻¹. The nitrogen harvest increased in pure Sb plots as the N doses applied increased. Furthermore, the protein concentration of the hay from the mixtures (158.2–165.7 mg g⁻¹) was equal to that of the pure A stands (165.7 mg g⁻¹) and higher than that of pure Sb stands (122.9 mg g⁻¹ at 150 kg N ha⁻¹ application) although the hay from pure Rc plots had the highest protein concentration (179.3 mg g⁻¹). The LER values were also higher in the mixtures (e.g. 1.28 in 1A 1Sb and 1.28 in 2Rc 1Sb plots) compared with the pure stands. The mixture plots also had a more balanced temporal distribution of hay. The grass component was more productive in early spring, whereas the legume fractions grew better in the summer. In conclusion, for a sustainable production of high-quality hay and greater N harvests without using N fertilizers, binary mixtures of Sb with A in alternating rows (1A 1Sb) were recommended for long-purpose stands and in alternation with double red clover rows (2Rc 1Sb) for short purpose stands under similar conditions. N application could be eliminated in the grass–legume mixtures without any yield depression.     

Effects of plant density on grain yield,protein size distribution,and breadmaking quality of winter wheat grown under two nitrogen fertilisation rates

Nitrogen (N) and plant density are two crucial factors that affect winter wheat (Triticum aestivum L.) yield and quality, but little is known regarding the effects of interactions between these two factors on the amount and size distribution of protein fractions and quality traits. We grew the bread wheat cultivar Jinan17 in two successive seasons (2012–2013 and 2013–2014) at three densities of 120 plants m⁻² (low), 180 plants m⁻² [the usual rate for a multiple-spike cultivar with high tillering ability in the North China Plain (NCP)], and 240 plants m⁻² (high) and two levels of N fertilisation of 0 (low N availability treatment without N fertilisation) and 240 kg ha⁻¹ (the usual N rate for winter wheat production in the NCP) to evaluate the effect of N level × plant density interaction on grain yield, grain protein concentration, the amount and composition of protein fractions, dough development time, dough stability time, and loaf volume. The effect of plant density on Jinan 17 grain yield and quality differed between the two N levels. As plant density increased, all the parameters listed above decreased under 0 kg ha⁻¹ N fertilisation, but increased under 240 kg ha⁻¹ N fertilisation. Stepwise regression analysis showed that the dough rheological properties and breadmaking quality of Jinan 17 were affected by plant density under both N levels, primarily through changes in the polymerisation degree of glutenins in the flour.     

White lupine as a beneficial crop in Southern Europe. II. Nitrogen recovery in a legume–oat rotation and a continuous oat–oat

One experiment lasting for two years was carried out at Pegões (central Portugal) to estimate the impact of mature white lupine residue (Lupinus albus L.) on yield of fodder oat (Avena sativa L. cv. Sta. Eulalia) as the next crop in rotation, comparing with the continuous cultivation of cereal, under two tillage practices (conventional tillage and no-till) and fertilized with five mineral nitrogen (N) rates, with three replicates. Oat as a first crop in the rotation provided more N to the agro-ecosystem (63 kg N ha⁻¹) than did lupine (30–59 kg N ha⁻¹). This was at a cost of 100 kg of mineral N ha⁻¹, whereas lupine was grown without addition of N. A positive response of oat as a second crop was obtained per kg of lupine-N added to the system when compared with the continuous oat–oat. The cereal also responded positively to mineral N in the legume amended soil in contrast with the oat–oat sequence where no response was observed, partly due to the fast mineralization rate of lupine residue and a greater soil N immobilization in the continuous oat system. Each kg N ha⁻¹ added to the soil through the application of 73 kg DM ha⁻¹ mature lupine residue (above- and belowground material) increased by 72 kg DM ha⁻¹ the oat biomass produced as the second crop in rotation when 150 kg mineral N ha⁻¹ were split in the season, independent of tillage practice. Mature legume residue conserved in the no-tilled soil depressed the yield of succeeding cereal but less than the continuous oat–oat for both tillage practices, where the application of mineral N did not improve the crop response.     

Performance and application of the APSIM Nwheat model in the Netherlands

APSIM Nwheat is a crop system simulation model, consisting of modules that incorporate aspects of soil water, nitrogen (N), crop residues, and crop growth and development. The model was applied to simulate above- and below-ground growth, grain yield, water and N uptake, and soil water and soil N of wheat crops in the Netherlands. Model outputs were compared with detailed measurements of field experiments from three locations with two different soil types. The experiments covered two seasons and a range of N-fertiliser applications. The overall APSIM Nwheat model simulations of soil mineral N, N uptake, shoot growth, phenology, kernels m⁻², specific grain weight and grain N were acceptable. Grain yields (dry weight) and grain protein concentrations were well simulated with a root mean square deviation (RMSD) of 0.8 t ha⁻¹ and 1.6 protein%, respectively. Additionally, the model simulations were compared with grain yields from a long-term winter wheat experiment with different N applications, two additional N experiments and regional grain yield records. The model reproduced the general effects of N treatments on yields. Simulations showed a good consistency with the higher yields of the long-term experiment, but overpredicted the lower yields. Simulations and earlier regional yields differed, but they showed uniformity for the last decade.In a simulation experiment, the APSIM Nwheat model was used with historical weather data to study the relationship between rate and timing of N fertiliser and grain yield, grain protein and soil residual N. A median grain yield of 4.5 t ha⁻¹ was achieved without applying fertiliser, utilising mineral soil N from previous seasons, from mineralisation and N deposition. Application of N fertiliser in February to increase soil mineral N to 140 kg N ha⁻¹ improved the median yield to 7.8 t ha⁻¹ but had little effect on grain protein concentration with a range of 8–10%. Nitrogen applications at tillering and the beginning of stem elongation further increased grain yield and in particular grain protein, but did not affect soil residual N, except in a year with low rainfall during stem elongation. A late N application at flag leaf stage increased grain protein content by several per cent. This increase had only a small effect on grain yield and did not increase soil residual N with up to 40 kg N ha⁻¹ applied, except when N uptake was limited by low rainfall in the period after the flag leaf stage. The economic and environmental optima in winter wheat were identified with up to 140 kg N ha⁻¹ in February, 90 kg N ha⁻¹ between tillering and beginning of stem elongation and 40 kg N ha⁻¹ at flag leaf stage resulting in a median of 8.5 t ha⁻¹ grain yield, 14.0% grain protein and 13 kg N ha⁻¹ soil residual N after the harvest. The maximum simulated yield with maximum N input from two locations in the Netherlands was 9.9 t ha⁻¹.     

Optimising crop production and nitrate leaching in China: Measured and simulated effects of straw incorporation and nitrogen fertilisation

The sustainability of growing a maize—winter wheat double crop rotation in the North China Plain (NCP) has been questioned due to its high nitrogen (N) fertiliser use and low N use efficiency. This paper presents field data and evaluation and application of the soil–vegetation–atmosphere transfer model Daisy for estimating crop production and nitrate leaching from silty loam fields in the NCP. The main objectives were to: i) calibrate and validate Daisy for the NCP pedo-climate and field management conditions, and ii) use the calibrated model and the field data in a multi-response analyses to optimise the N fertiliser rate for maize and winter wheat under different field managements including straw incorporation.The model sensitivity analysis indicated that a few measurable crop parameters impact the simulated yield, while most of the studied topsoil parameters affect the simulated nitrate leaching. The model evaluation was overall satisfactory, with root mean squared residuals (RMSR) for simulated aboveground biomass and nitrogen content at harvest, monthly evapotranspiration, annual drainage and nitrate leaching out of the root zone of, respectively, 0.9 Mg ha⁻¹, 20 kg N ha⁻¹, 30 mm, 10 mm and 10 kg N ha⁻¹ for the calibration, and 1.2 Mg ha⁻¹, 26 kg N ha⁻¹, 38 mm, 14 mm and 17 kg N ha⁻¹ for the validation. The values of mean absolute deviation, model efficiency and determination coefficient were also overall satisfactory, except for soil water dynamics, where the model was often found erratic. Re-validation run showed that the calibrated Daisy model was able to simulate long-term dynamics of crop grain yield and topsoil carbon content in a silty loam field in the NCP well, with respective RMSR of 1.7 and 1.6 Mg ha⁻¹. The analyses of the model and the field results showed that quadratic, Mitscherlich and linear-plateau statistical models may estimate different economic optimal N rates, underlining the importance of model choice for response analyses to avoid excess use of N fertiliser. The analyses further showed that an annual fertiliser rate of about 300 kg N ha⁻¹ (100 for maize and 200 for wheat) for the double crop rotation with straw incorporation is the most optimal in balancing crop production and nitrate leaching under the studied conditions, given the soil replenishment with N from straw mineralisation, atmospheric deposition and residual fertiliser.This work provides a sound reference for determining N fertiliser rates that are agro-environmentally optimal for similar and other cropping systems and regions in China and extends the application of the Daisy model to the analyses of complex agro-ecosystems and management practices under semi-arid climate.     

Effects of input management and crop diversity on non-renewable energy use efficiency of cropping systems in the Canadian Prairie

Although producers’ prime objective may be to increase net returns, many are also interested in conserving and enhancing the quality the soil, water and air resources through adopting more environmentally friendly production practices. This study compared non-renewable energy inputs, energy output, and energy use efficiency of nine dryland cropping systems comprised of a factorial combination of three methods of input management [high (HIGH), i.e., conventional tillage plus full recommended rates of fertilizer and pesticides; reduced (RED), i.e., conservation tillage plus reduced rates of fertilizer and pesticides; and organic (ORG), i.e., conventional tillage plus N-fixing legumes and non-chemical means of weed and pest control]; and three crop rotation systems with varying levels of cropping diversity [a fallow-based rotation with low crop diversity (LOW); a diversified rotation using annual cereal, oilseed and pulse grains (DAG); and a diversified rotation using annual grains and perennial forages (DAP)]. The study was conducted over the 1996–2007 period on a Dark Brown Chernozemic soil (Typic Boroll) in the Canadian Prairies. As expected, total direct plus indirect energy input was the highest for the HIGH and RED input treatments (3773 MJ ha^?1 year^?1), and 50% less for ORG management. Most of the energy savings came from the non-use of inorganic fertilizers and pesticides in the ORG management treatments. Further, total energy use was the highest for the DAG treatments (3572 MJ ha^?1 year^?1), and similar but about 18% lower for the DAP and LOW crop diversity treatments compared to DAG. Thus, overall, the HIGH/DAG and RED/DAG systems had the highest energy requirements (4409 MJ ha^?1 year^?1) and ORG/DAP had the lowest (1806 MJ ha^?1 year^?1). Energy output (calorimetric energy content) was typically the highest for the HIGH input treatments (26,541 MJ ha^?1 year^?1), was about 4% less with RED, and 37% less with ORG management. The latter reflected the lower crop yields obtained with organic management. Similarly, energy output was the highest for the DAP treatments (25,008 MJ ha^?1 year^?1), about 5% less for DAG, and 20% less for the LOW crop diversity treatments. The higher energy output with the DAP treatments largely reflected that the entire harvested biomass of the forage crops was included in energy output, while for grain crops only the seed was included. The straw and crop residues from annual crops were returned to the land to protect the soil from erosion and to maintain soil organic matter as this is the recommended practice in this semi-arid region. In contrast to energy output and to net energy produced, energy use efficiency (measured as yield of grain plus forage produced per unit of energy input or as energy output/energy input ratio) was the highest for the ORG input treatments (497 kg of harvested production GJ^?1 of energy input, and an energy output/energy input ratio of 8.8). We obtained lower, but generally similar energy use efficiency for the HIGH and RED input treatments (392 kg GJ^?1 and ratio of 7.1). Thus, overall, ORG/DAP was the most energy efficient cropping system, while RED/LOW and RED/DAG generally ranked the lowest in energy use efficiency. Our findings support the current movement of producers toward ORG management as a means of reducing the reliance on non-renewable energy inputs and improving overall energy use efficiency of their cropping systems. Our results also suggest that moving away from traditional monoculture cereal rotations that employ frequent summer fallowing, toward extended and diversified crop rotations that use reduced tillage methods, although resulting in an increase in energy output, will not significantly reduce the overall reliance on non-renewable energy inputs, nor enhance energy use efficiency, unless perennial legume forages and/or legume grain crops are included in the cropping mix.     

Biomass production and N balance of giant reed (Arundo donax L.) under high water and N input in Mediterranean environments

This study aimed to evaluate the productivity of Arundo donax under good water and N availability coming from non-conventional sources, in different Italian environments (Padova and Bologna in the north, Reggio Calabria and Catania in the south) in relation to three harvest periods (autumn; mid-winter; late-winter).In the northern locations A. donax had already reached maximum productivity the year after transplanting, with 85 and 98 t ha⁻¹ of dry matter at Padova and Bologna, respectively. At Reggio Calabria and Catania a further biomass increase was obtained from the second to third year of cultivation, when production was 62 t ha⁻¹ and 51 t ha⁻¹, respectively.The average dry matter production was 74, 66 and 65 t ha⁻¹ with autumn, mid-winter and late-winter harvesting, respectively.Under N input ranging from 225 to 329 kg ha⁻¹ year⁻¹ at the different locations, the apparent N balance (input–output) was negative except in Catania indicating a great potential of A. donax to provide high N uptake, which would be a useful feature in environments under the European Nitrates Directive.     

Organic and mineral fertilization management improvements to a double-annual cropping system under humid Mediterranean conditions

The efficient use by crops of nitrogen from manures is an agronomic and environmental issue, mainly in double-annual forage cropping systems linked to livestock production. A six-year trial was conducted for a biennial rotation of four forage crops: oat-sorghum (first year) and ryegrass-maize (second year) in a humid Mediterranean area. Ten fertilization treatments were introduced: a control (without N); two minerals equivalent to 250 kg N ha⁻¹ year⁻¹ applied at sowing or as sidedressing; dairy cattle manure at a rate of 170, 250 and 500 kg N ha⁻¹ year⁻¹ and four treatments where the two lowest manure rates were supplemented with 80 or 160 kg mineral N ha⁻¹ year⁻¹. They were distributed according to a randomized block design with three blocks. The highest N mineral soil content was found in the summer of the third rotation, in plots where no manure was applied. The yearly incorporation of manure reduced, in successive cropping seasons, the amount of additional mineral N needed as sidedressing to achieve the highest yields. Besides, in the last two years, there was no need for mineral N application for the manure rate of 250 kg N ha⁻¹ year⁻¹. This amount always covered the oat-sorghum N uptake. In the ryegrass-maize sequence uptakes were as high as 336 kg N ha⁻¹ year⁻¹. In the medium term, the intermediate manure rate (250 kg N ha⁻¹ year⁻¹) optimizes nutrient recycling within the farming system, and it should be considered in the analysis of thresholds for N of organic origin to be applied to systems with high N demand.     

Evaluation of cover-cropping managements on productivity and N-utilization efficiency of kenaf (Hibiscus cannabinus L.), under different nitrogen fertilization rates and soil types

Biomass productivity, nitrogen recovery fraction and nitrogen utilization efficiency (NUE) of kenaf (Hibiscus cannabinus L.) cultivar Tainung 2 were tested, under three Lens culinaries treatments (incorporated, harvested before the sowing of the energy crop and mono-cropping) and four nitrogen dressings (0, 50, 100 and 150 kg ha⁻¹), in two field experiments carried out on a fertile, clayey to loamy soil, and on a sandy soil of moderate fertility, in central Greece, over the period 2007–2009. The obtained results showed a positive response in L. culinaries cover cropping on kenaf total yield, on both experimental sites. Total dry biomass fluctuated from 16.07 to 21.46 t ha⁻¹ for incorporated plots and from 13.63 to 16.55 t ha⁻¹ for control treatments (relied only on applications of N-fertilization) for sandy soil, and from 14.98 to 19.28 t ha⁻¹ in case of legume incorporation and from 12.34 to 16.69 t ha⁻¹ for control plots, for clayey soil, respectively. The evaluated NUE was 76 kg kg⁻¹, for sandy soil, and 72 kg kg⁻¹, for clay soil. The recovery fraction escalated from 41% in control plots to 70% in plots with previous L. culinaries cultivation for sandy soil, while for clayey soil an increase of 20% was recorded, indicating a prominent effect of legume cover-cropping management.     

Yield and nitrogen utilization efficiency of the pseudocereals amaranth,quinoa, and buckwheat under differing nitrogen fertilization

In recent years, the cultivation of the pseudocereal species amaranth, quinoa, and buckwheat has gained rising attention. This study was undertaken to explore nitrogen (N) fertility requirements and nitrogen use efficiency of these species. For this purpose, a 2-year field experiment with N rates of 0, 80, and 120 kg N ha⁻¹ for amaranth and quinoa and 0, 30, and 60 kg N ha⁻¹ for buckwheat and two cultivars of each species was conducted.Grain yield of amaranth responded to N and ranged between 1986 and 2767 kg ha⁻¹. Nitrogen utilization efficiency (NUtE) ranged from 13.9 to 15.4 kg grain yield per kg above-ground plant N and decreased with increasing N rate. Higher grain yields and NUtEs seemed to be mainly inhibited by the low harvest index (0.22–0.23) of the investigated amaranth cultivars.Quinoa yielded between 1790 and 3495 kg grain ha⁻¹ and responded strongly to N fertilization. NUtE averaged 22.2 kg kg⁻¹ and did not decrease with increasing N rates.The grain yield of buckwheat did not respond to N fertilization and averaged 1425 kg ha⁻¹. N uptake increased only slightly with N fertilization. NUtE ranged from 16.1 to 20.0 kg kg⁻¹. Main problems occurring with the application of N to buckwheat were grain scattering and lodging.     

Organic amendment and minimum tillage in winter wheat grown in Mediterranean conditions: Effects on yield performance,soil fertility and environmental impact

The experiment was conducted to evaluate the agronomic benefit of the application of organic fertilizers combined with different soil tillage on quantitative and qualitative components of winter wheat (Triticum durum Desf., cv. ‘Simeto’) and on chemical soil fertility parameters. The environmental impact, due to heavy metals introduced in soil-plant system, was further investigated. Soil tillage treatments consisted of conventional (CT) and minimum tillage (MT). Fertilization treatments were: mineral at 100 kg N ha⁻¹ (N_min); municipal solid waste compost at 100 kg N ha⁻¹ (N_comp); 50 kg N ha⁻¹ of both compost and mineral fertilizers (N_mix); sewage sludge at 100 kg N ha⁻¹ (N_ss). These treatments were compared with an unfertilized control (N₀). No significant difference was observed between the two soil tillage treatments for quantitative yield production, while among the fertilization treatments N_ss did not show any significant difference compared to N_min. At the end of the research, the fertility of the soil (oxidable carbon, total nitrogen, available phosphorus) was on average higher in N_comp and N_ss treatments compared to the N₀ and N_min ones. The overall distribution of heavy metals in soil-plant system respect to the different fertilizer treatments has not allowed to grouped their effects with Principal Components Analysis. This result showed that the amount of potential pollutants applied by organic amendments did not modified the dynamic equilibrium of the soil–plant system. The MT, as well as the fertilization with the application of sewage sludge (N_ss), allowed to reach productive performance similar to conventional management (CT with N_min). Here we demonstrate that, in the short term period, sustainable agronomical techniques can replace the conventional one with environmental benefit.     

Strategies to optimize nitrogen efficiency when fertilizing with pig slurries in dryland agricultural systems

In dryland agricultural systems, pig slurry (PS) is usually applied to cereal crops only at sowing, and slurries accumulate for the rest of the year in pits. In this context, a four-year experiment was established in order to evaluate the feasibility of PS applications at the barley or wheat tillering stage. The main treatments were PS either applied at sowing (25 Mg ha⁻¹) or not, but they alternated after a two-year period. Both were annually combined with eight side-dressing treatments at cereal tillering: mineral N as NH₄NO₃ (M; 60 or 120 kg N ha⁻¹ yr⁻¹), PS from fattening pigs (PSf; 17, 30, 54 Mg ha⁻¹ yr⁻¹), PS from sows (PSs; 25, 45, 81 Mg ha⁻¹ yr⁻¹) and a treatment without N. The combined fertilization treatments were 18 plus a control (no N applied). In the context of crop rotation, the biennial alternation of PS applied at sowing allowed the control of soil nitrate increments, while PS side-dressing improved N recovery compared with a unique application at sowing. The highest yields (>3.6 Mg ha⁻¹ yr⁻¹) were obtained with an annual average (4-yr) N rate close to 173 kg N ha⁻¹ (±40 kg N ha⁻¹). The best overall strategies corresponded to PSs side-dressings of 50–90 kg N ha⁻¹. These PSs rates also recorded the highest values on the five calculated N-efficiency indexes, which were higher than or similar to results from M side-dressings or those recorded in the literature. These similarities (M vs. PSs) were also shown by the reduction of unaccounted-for N inside the overall N balance. Thus, split PS application during the crop cycle is a sound fertilization option in dryland systems.     

Maize yield and water balance is affected by nitrogen application in a film-mulching ridge–furrow system in a semiarid region of China

Poor soil and drought stress are common in semiarid areas of China, but maize has a high demand for nitrogen (N) and water. Maize production using the technique of double ridges and furrows mulched with plastic film are being rapidly adopted due to significant increases in yield and water use efficiency (WUE) in these areas. This paper studied N use and water balance of maize crops under double ridges and furrows mulched with plastic-film systems in a semiarid environment over four growing seasons from 2007 to 2010. To improve precipitation storage in the non-growing season, the whole-year plastic-film mulching technique was used. There were six treatments which had 0, 70, 140, 280, 420 or 560 kg N ha⁻¹ applied in every year for maize. In April 2011, spring wheat was planted in flat plots without fertilizer or mulch following four years of maize cultivation. After four years, all treatments not only maintained soil water balance in the 0–200 cm soil layer but soil water content also increased in the 0–160 cm soil layer compared to values before maize sowing in April 2007. However, under similar precipitation and only one season of spring wheat, soil water content in the 0–160 cm soil layer sharply decreased in all treatments compared to values before sowing in April 2011. Over the four years of maize cultivation, average yield in all treatments ranged from 4071 to 6676 kg ha⁻¹ and WUE ranged from 18.2 to 28.2 kg ha⁻¹ mm⁻¹. In 2011, the yield of spring wheat in all treatments ranged from 763 to 1260 kg ha⁻¹ and WUE from 3.5 to 6.5 kg ha⁻¹ mm⁻¹. The potential maximum grain yield for maize was 6784 kg ha⁻¹ with 360 kg N ha⁻¹ applied for four years, but considerable NO₃N accumulated in the soil profile. A lesser application (110 kg N ha⁻¹) to this tillage system yielded in 82% of the maximum, increased nitrogen use efficiency and mitigated the risk of nitrogen loss from the system. This study suggests that double ridge–furrow and whole-year plastic-film mulching could sustain high grain yields in maize with approximately 110 kg N ha⁻¹ and maintain soil water balance when annual precipitation is >273 mm in this semiarid environment.     

Exploring options to combine high yields with high nitrogen use efficiencies in irrigated rice in China

In Jiangsu province, Southeast China, high irrigated rice yields (6–8000 kg ha⁻¹) are supported by high nitrogen (N) fertilizer inputs (260–300 kg N ha⁻¹) and low fertilizer N use efficiencies (recoveries of 30–35%). Improvement of fertilizer N use efficiency can increase farmers’ profitability and reduce negative environmental externalities. This paper combines field experimentation with simulation modeling to explore N fertilizer management strategies to realize high yields, while increasing N use efficiency. The rice growth model ORYZA2000 was parameterized and evaluated using data from field experiments carried out in Nanjing, China. ORYZA2000 satisfactorily simulated yield, crop biomass and crop N dynamics, and the model was applied to explore options for different N-fertilizer management regimes, at low and high levels of indigenous soil N supply, using 43 years of historical weather data.On average, yields of around 10–11,000 kg ha⁻¹ were realized (simulated and in field experiments) with fertilizer N rates of around 200 kg ha⁻¹. Higher fertilizer doses did not result in substantially higher yields, except under very favorable weather conditions when yields exceeding 13,000 kg ha⁻¹ were calculated. At fertilizer rates of 150–200 kg ha⁻¹, and at the tested indigenous soil N supplies of 0.6–0.9 kg ha⁻¹ day⁻¹, high fertilizer N recovery (53–56%), partial N productivity (50–70 kg kg⁻¹) and agronomic N use efficiency (20–30 kg kg⁻¹) were obtained with application in three equal splits at transplanting, panicle initiation and booting. Increasing the number of splits to six did not further increase yield or improve any of the N use efficiency parameters.