Liquid chromatographic determination of morphine sulfate and some contaminants in injections and bulk drug material: collaborative study

A liquid chromatographic method for the assay of morphine sulfate and some preservatives and impurities in the bulk drug and in injections has been developed and collaboratively studied in 8 laboratories. Each collaborator analyzed 5 samples: 1 bulk drug, 3 different concentrations of injectable dosages, and 1 prepared mixture containing, in addition to morphine sulfate, phenol, 2-mercaptobenzothiazole, and pseudomorphine. The proposed method quantitates morphine sulfate and resolves the other components for identification using a C18 reverse-phase column with a mobile solvent containing 240 mL methanol, 720 mL 0.005 M 1-heptanesulfonic acid Na salt, and 10 mL acetic acid. Samples are prepared by direct dilution with mobile solvent minus 1-heptanesulfonic acid. All collaborators met system suitability requirements and performed the analysis without difficulty. No outliers were found when data were analyzed by the Dixon, Grubbs, double Grubbs, and Cochran tests. Relative standard deviations between laboratories (RSDR) for duplicate determinations of morphine sulfate ranged from 1.4 to 2.1%. Mean morphine sulfate recoveries for the bulk drug and the prepared mixture were 100.8 and 100.4%, respectively. The method has been approved interim official first action.     

Liquid chromatographic determination of prednisolone in tablets and bulk drugs: interlaboratory study

A normal phase liquid chromatographic (LC) method for the determination of prednisolone in tablets and bulk drugs was studied by 7 analysts. An LC system, consisting of a methanol-water-ethylene dichloride-acetic acid mobile phase and a silica column, was used to analyze bulk drugs, individual tablets, and composite samples. Analysts were supplied with 16 samples, including simulated formulations, composites of commercial tablets, intact tablets, and bulk drug substances. Results agreed with those obtained by the author. The coefficients of variation of the analysts' results ranged from 1.34% for bulk drugs to 2.14% for tablet composites. The LC method is suggested as an alternative to the official AOAC and USP XX blue tetrazolium colorimetric methods.     

Beta-cyclodextrin post-column fluorescence enhancement of aflatoxins for reverse-phase liquid chromatographic determination in corn

beta-Cyclodextrin enhances the fluorescence of aflatoxins B1 and G1 in aqueous systems. This effect was utilized in developing a unique reverse-phase liquid chromatographic (LC) method for determination of aflatoxins B1, B2, G1, and G2 (B1 detection limit 1 ppb), without preparing derivatives of B1 and G1. The aflatoxins are dissolved in methanol or the mobile phase for injection onto the LC system. Using a mobile phase of methanol-beta-cyclodextrin (1 + 1), the aflatoxins are resolved on a C18 column. Fluorescence of the aflatoxins is enhanced by post-column introduction of an aqueous concentrated beta-cyclodextrin solution. All 4 aflatoxins elute within 10 min in the order G2, G1, B2, B1. Fluorescence responses for B1 and G1 standards were linear over the concentration range 0.5-10 ng, yielding correlation coefficients (r) of 0.9989 and 1.000, respectively. The average peak response ratio for G1:B1 for the mobile phase-enhancement solution described was 0.765 with a coefficient of variation (CV) of 0.98%. CVs were 6.2, 9.0, and 7.5% for multiple assays of aflatoxin B1 in 3 samples of naturally contaminated corn. For samples of corn spiked to a total B1 content of 8.3 ng/g, average B1 recovery was 90% (CV 11.7%).     

Determination of natamycin in cheese and cheese rind: interlaboratory collaborative study

A collaborative test on the determination of natamycin in cheese and cheese rind was conducted. Participants were from 37 laboratories in 13 countries. Eight samples, consisting of 4 duplicates, were investigated by a spectrometric method and a liquid chromatographic (LC) method. The spectrometric method gave good results (coefficient of variation [CV] = 12%) and the LC method with ultraviolet detection gave reasonable results (CV = 25%) for levels down to 15 mg/kg (0.9 mg/dm2). For very low levels, a preconcentration step is necessary, but even then quantitation is poor (CV = 35-37%) for both methods at 1.7 mg/kg, although the presence of natamycin can be detected qualitatively. For a level of 0.3 mg/kg, quantitation is poor (CV = 39%) for the LC method and impossible (CV = 60%) for the spectrometric method.     

Liquid chromatographic determination and identification tests for dexamethasone in bulk drugs and elixirs: collaborative study

A normal phase liquid chromatographic method for the determination of dexamethasone in bulk drugs and elixirs was collaboratively studied by 6 laboratories. The method uses a silica column, water-modified acetic acid-methanol-methylene chloride mobile phase, cortisone internal standard, and photometric detection at 254 nm. Collaborators were supplied blind duplicate samples of 3 bulk drugs, 2 commercial elixirs, and 1 authentic elixir. Dexamethasone elixir dosage level is 0.5 mg/5 mL. Mean recovery of dexamethasone from the authentic elixir formulated to contain 0.471 mg/5 mL was 94.5%. (Authentic elixirs were found to stabilize about 6% below the theoretical concentration.) Mean recovery for the bulk drugs was between 97.1 and 100.1%. Mean coefficients of variation for bulk drug and elixir samples were less than 0.8% and 3.6%, respectively. Identification tests for dexamethasone by thin-layer chromatography, infrared spectroscopy, and relative LC retention times, as well as the gas chromatographic determination of alcohol in the elixirs were also collaboratively studied. Mean recovery of alcohol from the synthetic elixir was 98.6%. The mean coefficient of variation for alcohol for all samples analyzed was less than 1.4%. The LC method for dexamethasone in drug substance and elixirs, the identification tests, and the GC method for alcohol in dexamethasone elixirs have been adopted official first action.     

Analysis of USP epinephrine injections for potency, impurities, degradation products, and d-enantiomer by liquid chromatography, using ultraviolet and electrochemical detectors

A liquid chromatographic (LC) method was adapted for the determination of epinephrine and related impurities in intravenous and cardiac injections; ultraviolet (UV) and electrochemical detectors (EC) were used in series. Epinephrine was determined and related impurities, i.e., adrenalone, epinephrine sulfonic acid, and norepinephrine, were detected directly in a small portion of the injection solution. Diastereoisomers of the epinephrine enantiomers were prepared by derivatization and determined by LC with a UV detector. The recovery of epinephrine added to epinephrine injection was 100%. The recovery of d-enantiomer from a d, l mixture was 100%. Impurities at levels less than 1% were easily detected. The LC method with UV detection is faster and more convenient than the USP XX method. In addition, impurities can be detected in the same portion of sample. The procedure is stability-indicating.     

Liquid chromatographic determination of pentaerythritol tetranitrate in pharmaceuticals: collaborative study

A liquid chromatographic (LC) method for the determination of pentaerythritol tetranitrate (PETN) in pharmaceutical formulations and the bulk drug triturate was evaluated in an interlaboratory study that included 12 participating laboratories. The procedure involves extraction of the active ingredient with mobile phase, followed by filtration of the extract and reverse-phase liquid chromatography using an octadecylsiliane bonded phase column and UV detection at 230 nm. The mobile phase composition is 35% water in acetonitrile (v/v). Three bulk drug samples (20, 20, and 35% PETN), 2 commercial tablet formulations (20 and 80 mg PETN/tablet), and 1 commercial capsule formulation (45 mg PETN/capsule) were analyzed in duplicate by the proposed method. Repeatability (sr, RSDr) and reproducibility (SR, RSDR) based on peak height measurement for these samples ranged from 0.0066 to 0.1806 (0.53-3.36%) and 0.0165 to 0.2075 (0.76-3.86%), respectively. Results for peak area measurements ranged from 0.0145 to 0.2011 (0.93-3.74%) and 0.0231 to 0.2091 (1.28-3.89%), respectively. The method has been approved interim official first action by AOAC.     

Liquid chromatographic determination of quinine, hydroquinine, saccharin, and sodium benzoate in quinine beverages

A liquid chromatographic (LC) method is described for the determination of quinine, hydroquinine, sodium saccharin, and sodium benzoate in soft drinks. The method involves simple sample preparation, direct injection onto an octadecylsilane column, and elution with a methanol-acetonitrile-water-acetic acid (20 + 10 + 70 + 1) mobile phase. Eluted constituents are measured spectrophotometrically at 254 nm. The relationship between peak height and concentration was linear between 20 and 120 micrograms/mL for quinine. A relative standard deviation of 0.82% was obtained for commercial samples spiked with quinine, and the average recovery was 100.3%. The proposed procedure is accurate and rapid and can also detect hydroquinine (a natural contaminant of quinine), sodium saccharin, and sodium benzoate. Linear responses ranged from 0.45 to 20 micrograms/mL for hydroquinine, from 54.8 to 219 micrograms/mL for sodium saccharin, and from 10.1 to 145.1 micrograms/mL for sodium benzoate. The reproducibility of the LC method was evaluated with standard solutions of hydroquinine, sodium saccharin, and sodium benzoate, which produced relative standard deviations of 0.42, 0.46, and 1.13%, respectively. The average recoveries for sodium saccharin and sodium benzoate from spiked samples were 99.4 and 100.2%, respectively.     

Liquid chromatographic determination of morantel tartrate in cattle feed

A liquid chromatographic (LC) method is proposed for measuring 0.485-0.970% morantel tartrate in cattle feeds. The drug is leached from feed, diluted, separated from interfering substances on a silica column, and measured in the effluent stream by 313 nm spectrophotometric detection. Two potential degradation products, i.e., cis-isomer of morantel tartrate and N-(3-methylaminopropyl)-trans-3-(3-methyl-2-thienyl)acrylamide, and a related anthelmintic, i.e., pyrantel tartrate, do not interfere. Average recovery of drug from liquid spiked samples and laboratory blends was 98-100% with a maximum coefficient of variation (CV) of 2.3%. Results for pelleted and crumbled commercial scale feeds ranged from 94 to 102% of label claim, with a maximum CV of 1.5%.     

Dry column-thermal energy analyzer method for determining N-nitrosopyrrolidine in fried bacon: collaborative study

A dry column method for isolating N-nitrosopyrrolidine (NPYR) from fried, cure-pumped bacon and detection by gas chromatography-thermal energy analyzer (TEA) was studied collaboratively. Testing the results obtained from 11 collaborators for homogeneous variances among samples resulted in splitting the nonzero samples into 2 groups of sample levels, each with similar variances. Outlying results were identified by AOAC-recommended procedures, and laboratories having outliers within a group were excluded. Results from the 9 collaborators remaining in the low group yielded coefficients of variation (CV) of 6.00% and 7.47% for repeatability and reproducibility, respectively, and the 8 collaborators remaining in the high group yielded CV values of 5.64% and 13.72%, respectively. An 85.2% overall average recovery of the N-nitrosoazetidine internal standard was obtained with an average laboratory CV of 10.5%. The method has been adopted official first action as an alternative to the mineral oil distillation-TEA screening procedure.     

Liquid chromatographic determination of chlortetracycline hydrochloride in ruminant and poultry/swine feeds.

A liquid chromatographic (LC) method is described for the determination of chlortetracycline hydrochloride (CTC) in poultry/swine and ruminant feeds in the 10-100 ppm range and in premix. CTC is extracted from ground feed/premix with acidified acetone, and the extract is filtered through a Millex-HV filter or disposable C18 column. The filtrate is partitioned with methylene chloride when additional cleanup is necessary. A Nova-Pak C18 column is used for LC separation with determination at 370 nm. The average recovery of CTC from premix was 95% with a standard deviation (SD) of 1.70 and a coefficient of variation (CV) of 1.79%. The overall average recovery from feeds was 77% with an SD of 3.18 and a CV of 4.10%.     

Resolution and analysis of enantiomers of amphetamines by liquid chromatography on a chiral stationary phase: collaborative study

A rapid, accurate method for separating and determining the enantiomeric composition of amphetamine bulk drug and commercial preparations was developed and subjected to collaborative study. Amide derivatives of the amphetamine enantiomers are formed by using achiral 2-naphthoyl chloride. The resulting enantiomeric amides are then chromatographed on a commercially available chiral stationary phase with hexane-isopropyl alcohol-acetonitrile (97 + 3 + 0.5) mobile phase, with detection at 254 nm. Seven collaborators received bulk drug and commercial samples of amphetamine. The collaborators and authors determined the mean percent l- and d-amphetamine from 2 injections of each sample. The method can detect the presence of as little as 0.5% of the l-enantiomer in d-amphetamine, with reproducibility between laboratories of +/- 71.3%. The method has been adopted official first action for determination of the enantiomeric composition of amphetamine bulk drug and preparations.     

Liquid chromatographic determination of colchicine in pharmaceuticals: collaborative study

A liquid chromatographic (LC) method for the determination of colchicine in pharmaceutical dosage forms and the bulk drug was evaluated in an interlaboratory study which included 13 participating laboratories. The method involves extraction (or dissolution) of the active ingredient with methanol-water (1 + 1), followed by filtration of the extract and reverse phase LC using an octylsilane bonded phase column and UV detection at 254 nm. The mobile phase consists of a methanol-phosphate buffer mixture (pH = 5.5). Three commercial tablet formulations (0.5-0.6 mg colchicine/tablet), 1 synthetic injectable preparation (0.510 mg colchicine/mL), and 1 bulk drug sample were assayed in duplicate by the proposed method. The reproducibility and repeatability standard deviations based on nonpooled results for each sample ranged from 0.0062 mg/mL to 0.0147 mg/tablet and from 0.0037 mg/mL to 0.0127 mg/tablet, respectively; the corresponding coefficients of variation ranged from 1.21 to 2.54% and from 0.73 to 2.19%, respectively. The mean recovery from the synthetic injectable formulation was 100.0%. The method has been adopted official first action.     

Determination of oleandrin in tissues and biological fluids by liquid chromatography-electrospray tandem mass spectrometry

A rapid LC-MS/MS method, using a triple-quadrupole/linear ion trap mass spectrometer, was developed for the quantitative determination of oleandrin in serum, urine, and tissue samples. Oleandrin, the major cardiac glycoside of oleander (Nerium oleander L.), was extracted from serum and urine samples with methylene chloride and from tissues with acetonitrile. The tissue extracts were cleaned up using Florisil solid-phase extraction columns. Six replicate fortifications of serum and urine at 0.001 microg/g (1 ppb) oleandrin gave average recoveries of 97% with 5% CV (relative standard deviation) and 107% with 7% CV, respectively. Six replicate fortifications of liver at 0.005 microg/g (5 ppb) oleandrin gave average recoveries of 98% with 6% CV. This is the first report of a positive mass spectrometric identification and quantitation of oleandrin in tissue samples from oleander intoxication cases. The sensitivity and specificity of the LC-MS/MS analysis enables it to be the method of choice for toxicological investigations of oleander poisoning.     

Reverse-phase liquid chromatographic determination of lysine in complete feeds and premixes, using manual precolumn derivatization

A sample portion is hydrolyzed with 6N HCl for 23 h and cooled, the pH is adjusted to 7.7 with NaOH, and the solution is diluted with pH 7.7 borate buffer. An aliquot of the sample extract is derivatized with 9-fluorenylmethyl chloroformate (9-FMC). Lysine is separated from other amino acids by isocratic reverse-phase liquid chromatography (LC) using fluorescence detection: 260 nm excitation and 313 nm emission. The mobile phase is acetonitrile-0.1M acetic acid (pH 4.2) buffer (53 + 47). Linearity is satisfactory over a range of 0.4-24 micrograms/mL. Results from 9 feed samples (1.1-2.7% lysine) analyzed by both the LC method and an amino acid analyzer were not significantly different statistically. Recovery of standard lysine, spiked just before derivatization on these same 9 samples (in duplicate), was 100.9% with a coefficient of variation (CV) of 2.4%. A study of within-day and between-day method precision resulted in CVs of 1.1 and 1.8%, respectively. The variation of results was negligible when the method was tested for ruggedness on 7 factors.     

Liquid chromatographic determination of coumarin anticoagulants in tablets: collaborative study

A liquid chromatographic method for the determination of coumarin anticoagulants in tablets was collaboratively studied by 7 laboratories. The method uses an octadecylsilane-bonded microparticulate column, tetrahydrofuran-methanol-water-acetic acid mobile phase, and photometric detection at 311 nm. Each collaborator received samples of warfarin sodium, phenprocoumon, and dicumarol as a synthetic composite and as commercial individual and composited tablets. Pooled average assay values for synthetic and commercial tablet samples of warfarin sodium were 101.6 and 99.5%, respectively, with a combined reproducibility SD of 2.38% (CV = 2.37%) and combined repeatability SD of 1.49% (CV = 1.49%). Pooled average (SD) assay values for dicumarol and phenprocoumon commercial samples were 98.0 (2.27) and 101.3% (4.00), respectively. The content uniformity determinations of 2 mg warfarin sodium and 25 mg dicumarol tablets indicated average tablet contents (range) of 99.5% (91.0-116.0) and 98.0% (89.8-108.8), respectively. The method has been approved interim official first action.     

Reverse phase liquid chromatographic determination of dexamethasone acetate and cortisone acetate in bulk drug substances and dosage forms: method development

The determination of the steroid acetates was evaluated for ruggedness of the method by using an octyldecylsilane column, 254 nm detection, and acetonitrile-water as mobile phase. Mobile phase pH, oven temperature, and columns from various manufacturers had no dramatic effect on the chromatography. The method was then optimized for dexamethasone acetate and cortisone acetate bulk drug and dosage forms. For dexamethasone acetate, the bulk drug substance should be dried at 105 degrees C before use, and the sample should be dissolved in 50% acetonitrile-buffer pH 6 for stability. Cortisone acetate, on the other hand, was found to be nonhygroscopic and hence could be used as received. For stability, the sample should be stored in 50% acetonitrile-buffer pH 4.     

Determination of seven glycidyl esters in edible oils by gel permeation chromatography extraction and liquid chromatography coupled to mass spectrometry detection

A method based on a gel permeation chromatography (GPC) extraction procedure combined with an additional cleanup by solid-phase extraction (SPE) on silica gel and liquid chromatography-mass spectrometry (LC-MS) detection has been validated for the analysis of seven glycidyl esters (GEs) including glycidyl laurate, myristate, palmitate, stearate, oleate, linoleate, and linolenate in various edible oils. This method was conjointly developed and validated by two different laboratories, using two different detection systems, a LC time of flight MS (LC-ToF-MS) and a LC triple-quadrupole MS (LC-MS/MS). The extraction procedure allowed targeting low contamination levels due to a highly efficient matrix removal from the 400 mg oil sample loaded on the GPC column and is suitable for routine analysis as 24 samples can be extracted in an automated and reproducible way every 12 h. GPC extraction combined with SPE cleanup and LC-MS/MS detection leads to a limit of quantification in oil samples between 50 and 100 μg/kg depending on the type of glycidyl ester. Recoveries ranged from 68 to 111% (average = 93%). Quantification was performed by automated standard addition on extracts to compensate matrix effects artifacts. To control recoveries of each sample four isotopically labeled GEs ((13)C(3) or (13)C(4)) were included in the method.     

Determination of small quantities of atropine in commercial preparations by liquid chromatography with fluorescence detection

A method is presented for the determination of small quantities of atropine in commercial preparations by liquid chromatography (LC) with fluorescence detection. The sample is extracted with CHCl3 from basic suspension, the CHCl3 is evaporated on the steam bath, and the dry residue is dissolved in a small volume of CH3OH. A reverse phase column is used for the LC analysis; the eluting solvent is prepared by mixing 950 mL CH3OH with 50 mL water containing 1 g of the sodium salt of 1-pentanesulfonic acid. The fluorescence detector is set at an excitation wavelength of 255 nm and an emission wavelength of 285 nm. Several commercial tablets and injections containing atropine in combination with other ingredients and a commercial sample of belladonna extract were analyzed by the proposed method. Recoveries of atropine sulfate from aqueous solutions averaged 100.7% with a relative standard deviation (RSD) of 3.35% for atropine sulfate levels of 0.12 mg. Recoveries of atropine sulfate from synthetic injection formulations were 99.8 and 100.0% with RSDs of 2.03 and 2.35%, respectively; the atropine sulfate concentrations of commercial injections with the same formulations were found to be 97.0 and 100.0% of the labeled amounts with RSDs of 0.53 and 1.46%, respectively.     

Liquid chromatographic determination of glibenclamide in human plasma

The oral hypoglycemic agent glibenclamide was determined in human plasma by liquid chromatography (LC). Samples, with internal standard added, are extracted with dichloromethane. The organic phase is evaporated, and the residue is reconstituted in mobile phase for injection onto the LC column. Intra- and inter-day variability of the method was assessed at high and low levels of the drug. Although coefficients of variation were similar for both intra- and inter-day studies at both levels, CVs were smaller at the higher concentration level. Recovery of the drug was good at both high and low levels. The minimum level of detection was 5 ng/mL.