Identification of quantitative trait loci involved in resistance to <Emphasis Type="Italic">Pseudomonas syringae</Emphasis> pv. <Emphasis Type="Italic">syringae</Emphasis> in pea (<Emphasis Type="Italic">Pisum sativum</Emphasis> L.)

Pseudomonas syringae is the main pathogen responsible for bacterial blight disease in pea and can cause yield losses of 70%. P. syringae pv. pisi is prevalent in most countries but the importance of P. syringae pv. syringae (Psy) is increasing. Several sources of resistance to Psy have been identified but genetics of the resistance is unknown. In this study the inheritance of resistance to Psy was studied in the pea recombinant inbred line population P665 × ‘Messire’. Results suggest a polygenic control of the resistance and two quantitative trait loci (QTL) associated with resistance, Psy1 and Psy2, were identified. The QTL explained individually 22.2 and 8.6% of the phenotypic variation, respectively. In addition 21 SSR markers were included in the P665 × ‘Messire’ map, of which six had not been mapped on the pea genome in previous studies.     

Identification of RAPD markers linked to the rust (<Emphasis Type="Italic">Uromyces fabae</Emphasis>) resistance gene in pea (<Emphasis Type="Italic">Pisum sativum</Emphasis>)

Summary Two RAPD markers linked to gene for resistance (assayed as pustule number cm⁻² leaf area) to rust [Uromyces fabae (Pers.) de Bary] in pea (Pisum sativum L.) were identified using a mapping population of 31 BC₁F₁ [HUVP 1 (HUVP 1 × FC 1] plants, FC 1 being the resistant parent. The analysis of genetics of rust resistance was based on the parents, F₁, F₂, BC₁F₁ and BC₁F₂ generations. Rust resistance in pea is of non-hypersensitive type; it appeared to be governed by a single partially dominant gene for which symbol Ruf is proposed. Further, this trait seems to be affected by some polygenes in addition to the proposed oligogene Ruf. A total of 614 decamer primers were used to survey the parental polymorphism with regard to DNA amplification by polymerase chain reaction. The primers that amplified polymorphic bands present in the resistant parent (FC 1) were used for bulked segregant analysis. Those markers that amplified consistently and differentially in the resistant and susceptible bulks were separately tested with the 31 BC₁F₁ individuals. Two RAPD makers, viz., SC10-82₃₆₀ (primer, GCCGTGAAGT), and SCRI-71₁₀₀₀ (primer, GTGGCGTAGT), flanking the rust resistance gene (Ruf) with a distance of 10.8 cM (0.097 rF and LOD of 5.05) and 24.5 cM (0.194 rF and a LOD of 2.72), respectively, were identified. These RAPD markers were not close enough to Ruf to allow a dependable maker-assisted selection for rust resistance. However, if the two makers flanking Ruf were used together, the effectiveness of MAS would be improved considerably.     

Mapping of new resistance (<Emphasis Type="Italic">Vr2</Emphasis>, <Emphasis Type="Italic">Rm1</Emphasis>) and ornamental (<Emphasis Type="Italic">Di2</Emphasis>, <Emphasis Type="Italic">pl</Emphasis>) Mendelian trait loci in peach

Peach powdery mildew is one of the major diseases of the peach. Various sources of resistance to PPM have thus been identified, including the single dominant locus Vr2 carried by the peach rootstock ‘Pamirskij 5’. To map Vr2, a linkage map based on microsatellite markers was constructed from the F₂ progeny (WP²) derived from the cross ‘Weeping Flower Peach’ × ‘Pamirskij 5’. Self-pollinations of the parents were also performed. Under greenhouse conditions, all progenies were scored after artificial inoculations in two classes of reactions to PPM (resistant/susceptible). In addition to Vr2, WP² segregated for three other traits from ‘Weeping Flower Peach’: Rm1 for green peach aphid resistance, Di2 for double-flower and pl for weeping-growth habit. With their genomic locations unknown or underdocumented, all were phenotyped as Mendelian characters and mapped: Vr2 mapped at the top of LG8, at 3.3 cM, close to the CPSCT018 marker; Rm1 mapped at the bottom of LG1, at a position of 116.5 cM, cosegregating with the UDAp-467 marker and in the same region as Rm2 from ‘Rubira’^®; Di2 mapped at 28.8 cM on LG6, close to the MA027a marker; and pl mapped at 44.1 cM on LG3 between the MA039a and SSRLG3_16m46 markers. Furthermore, this study revealed, for the first time, a pseudo-linkage between two traits of the peach: Vr2 and the Gr locus, which controls the red/green color of foliage. The present work therefore constitutes a significant preliminary step for implementing marker-assisted selection for the four major traits targeted in this study.     

Molecular mapping of <Emphasis Type="Italic">Pc68</Emphasis>, a crown rust resistance gene in <Emphasis Type="Italic">Avena</Emphasis><Emphasis Type="Italic">sativa</Emphasis>

Crown rust, which is caused by Puccinia coronata f. sp. avenae, P. Syd. & Syd., is the most destructive disease of cultivated oats (Avena sativa L.) throughout the world. Resistance to the disease that is based on a single gene is often short-lived because of the extremely great genetic diversity of P. coronata, which suggests that there is a need to develop oat cultivars with several resistance genes. This study aimed to identify amplified fragment length polymorphism AFLP markers that are linked to the major resistance gene, Pc68, and to amplify the F₆ genetic map from Pc68/5*Starter × UFRGS8. Seventy-eight markers with normal segregation were discovered and distributed in 12 linkage groups. The map covered 409.4 cM of the Avena sativa genome. Two AFLP markers were linked in repulsion to Pc68: U8PM22 and U8PM25, which flank the gene at 18.60 and 18.83 centiMorgans (cM), respectively. The marker U8PM25 is located in the linkage group 4_12 in the Kanota × Ogle reference oat population. These markers should be useful for transferring Pc68 to genotypes with good agronomic characteristics and for pyramiding crown rust resistance genes.     

Characterization of genes <Emphasis Type="Italic">Rpp2</Emphasis>, <Emphasis Type="Italic">Rpp4</Emphasis>, and <Emphasis Type="Italic">Rpp5</Emphasis> for resistance to soybean rust

Asian rust, caused by the fungus Phakopsora pachyrhizi, is the most severe disease currently threatening soybean crops in Brazil. The development of resistant cultivars is a top priority. Genetic characterization of resistance genes is important for estimating the improvement when these genes are introduced into soybean plants and for planning breeding strategies against this disease. Here, we infected an F₂ population of 140 plants derived from a cross between ‘An-76’, a line carrying two resistance genes (Rpp2 and Rpp4), and ‘Kinoshita’, a cultivar carrying Rpp5, with a Brazilian rust population. We scored six characters of rust resistance (lesion color [LC], frequency of lesions having uredinia [%LU], number of uredinia per lesion [NoU], frequency of open uredinia [%OU], sporulation level [SL], and incubation period [IP]) to identify the genetic contributions of the three genes to these characters. Furthermore, we selected genotypes carrying these three loci in homozygosis by marker-assisted selection and evaluated their genetic effect in comparison with their ancestors, An-76, PI230970, PI459025, Kinoshita and BRS184. All three genes contributed to the phenotypes of these characters in F₂ population and when pyramided, they significantly contributed to increase the resistance in comparison to their ancestors. Rpp2, previously reported as being defeated by the same rust population, showed a large contribution to resistance, and its resistance allele seemed to be recessive. Rpp5 had the largest contribution among the three genes, especially to SL and NoU. Only Rpp5 showed a significant contribution to LC. No QTLs for IP were detected in the regions of the three genes. We consider that these genes could contribute differently to resistance to soybean rust, and that genetic background plays an important role in Rpp2 activity. All three loci together worked additively to increase resistance when they were pyramided in a single genotype indicating that the pyramiding strategy is one good breeding strategy to increase soybean rust resistance.     

Quantitative trait loci for temperature-sensitive resistance to <Emphasis Type="Italic">Puccinia striiformis</Emphasis> f. sp. <Emphasis Type="Italic">tritici</Emphasis> in wheat cultivar Flinor

Stripe (yellow) rust, caused by Puccinia striiformis Westend. f. sp. tritici Eriks. (Pst), is an important disease of wheat (Triticum aestivum L.) globally. Use of host resistance is an important strategy to manage the disease. The cultivar Flinor has temperature-sensitive resistance to stripe rust. To map quantitative trait loci (QTLs) for these temperature-sensitive resistances, Flinor was crossed with susceptible cultivar Ming Xian 169. The seedlings of the parents, and F₁, F₃ progeny were screened against Chinese yellow rust race CYR32 in controlled-temperature growth chambers under different temperature regimes. Genetic analysis confirmed two genes for temperature-sensitive stripe rust resistance. A linkage map of SSR markers was constructed using 130 F₃ families derived from the cross. Two temperature-sensitive resistance QTLs were detected on chromosome 5B, designated QYr-tem-5B.1 and QYr-tem-5B.2, respectively, and are separated by a genetic distance of over 50 cM. The loci contributed 33.12 and 37.33% of the total phenotypic variation for infection type, respectively, and up to 70.45% collectively. Favorable alleles of these two QTLs came from Flinor. These two QTLs are temperature-sensitive resistance loci and different from previously reported QTLs for resistance to stripe rust.     

Allelic variation for the rust resistance gene <Emphasis Type="Italic">Lr34</Emphasis>/<Emphasis Type="Italic">Yr18</Emphasis> in Canadian wheat cultivars

The wheat (Triticum aestivum L.) gene Lr34/Yr18 conditions resistance to leaf rust, stripe rust, and stem rust, along with other diseases such as powdery mildew. This makes it one of the most important genes in wheat. In Canada, Lr34 has provided effective leaf rust resistance since it was first incorporated into the cultivar Glenlea, registered in 1972. Recently, molecular markers were discovered that are either closely linked to this locus, or contained within the gene. Canadian wheat cultivars released from 1900 to 2007, breeding lines and related parental lines, were tested for sequence based markers caSNP12, caIND11, caIND10, caSNP4, microsatellite markers wms1220, cam11, csLVMS1, swm10, csLV34, and insertion site based polymorphism marker caISBP1. Thirty different molecular marker haplotypes were found among the 375 lines tested; 5 haplotypes had the resistance allele for Lr34, and 25 haplotypes had a susceptibility allele at this locus. The numbers of lines in each haplotype group varied from 1 to 140. The largest group was represented by the leaf rust susceptible cultivar “Thatcher” and many lines derived from “Thatcher”. The 5 haplotypes that had the resistance allele for Lr34 were identical for the markers tested within the coding region of the gene but differed in the linked markers wms1220, caISBP1, cam11, and csLV34. The presence of the resistance or susceptibility allele at the Lr34 locus was tracked through the ancestries of the Canadian wheat classes, revealing that the resistance allele was present in many cultivars released since the 1970s, but not generally in the older cultivars.     

Resistance screening of <Emphasis Type="Italic">Coffea</Emphasis> spp. accessions for <Emphasis Type="Italic">Pratylenchus coffeae</Emphasis> and <Emphasis Type="Italic">Radopholus arabocoffeae</Emphasis> in Vietnam

Coffee varieties with resistance for the plant-parasitic nematodes Pratylenchus coffeae and Radopholus arabocoffeae are limited in Vietnam. A selection of imported varieties and high yield varieties of Arabica coffee in Vietnam were evaluated for resistance to both plant-parasitic nematode species in Northern Vietnam. The same experiments were carried out with hybrid arabica coffee, three selected clones of Coffea canephora and one clone of Coffea excelsa in the Western Highland of Vietnam. The screened coffee accessions from Ethiopia (KH1, KH13, KH20, KH21, KH29, and KH31) were susceptible and good host for P. coffeae. Also accessions 90P4 (Portugal) and Oro azteca (Mexico) had a reproduction factor Rf > 1. Pluma Hidalgo (Mexico), 90/6 (Vietnam), 90P3 (Portugal), 90P2 (Vietnam), Variedad (Mexico), 90T (Portugal), and Garnica (Mexico) were poor hosts (Rf < 1) but not tolerant to P. coffeae, expressed by a reduction of root weight compared to untreated control plants. Most of the coffee accessions tested in Northern Vietnam were intolerant to R. arabocoffeae, except 90T which showed no reduction of root weight, even at high initial nematode densities (4,000/pot). Good hosts for R. arabocoffeae were Variedad, KH1, KH21, KH29, KH20, KH31, and KH13 with Rf > 1. Pluma Hidalgo, 90/6, 90P3, 90P2, 90T, Oro azteca, and Garnica were poor hosts (Rf < 1). In the Western Highland experiment, all arabica coffee accessions were susceptible for P. coffeae with Rf ranging from 1.41 to 1.59. Tolerance to P. coffeae was found in C. liberica var. Dewevrei, Hong34 and Nhuantren. Coffea excelsa, Hong34, Nhuantren, and H1C19 were tolerant to R. arabocoffeae at the highest inoculation density (4,000 nematodes/pot). The most susceptible accessions were Nhuantren and K55. Resistance (Rf < 1) to R. arabocoffeae was found in C. liberica var. Dewevrei and Hong34. This article reports on the first screening for resistance and tolerance to P. coffeae and R. arabocoffeae in coffee accessions in Vietnam and shows promising results for enhanced coffee-breeding.     

Expression of <Emphasis Type="Italic">Bruguiera gymnorhiza</Emphasis><Emphasis Type="Italic">BgARP1</Emphasis> enhances salt tolerance in transgenic <Emphasis Type="Italic">Arabidopsis</Emphasis> plants

We have previously reported that expression of salt-responsive genes, including Bruguiera gymnorhiza ankyrin repeat protein 1 (BgARP1), enhances salt tolerance in both Agrobacterium tumefaciens and Arabidopsis. In this report, we further characterized BgARP1-expressing Arabidopsis to elucidate the role of BgARP1 in salt tolerance. BgARP1-expressing plants exhibited more vigorous growth than wild-type plants on MS plates containing 125–175 mM NaCl. Real-time PCR analysis showed enhanced induction of osmotin34 in the 2-week-old transformants under 125 mM NaCl. It was also showed that induction of typical salt-responsive genes, including RD29A, RD29B, and RD22, was blunted and delayed in the 4-week-old transformants during 24 h after 200 mM NaCl treatment. Ion content analysis showed that transgenic plants contained more K⁺, Ca²⁺, and NO₃ ⁻, and less NH₄ ⁺, than wild-type plants grown in 200 mM NaCl. Our results suggest that BgARP1-expressing plants may reduce salt stress by up-regulating osmotin34 gene expression and maintaining K⁺ homeostasis and regulating Ca²⁺ content. These results indicate that BgARP1 is functional on a heterogeneous background.     

Mapping of quantitative trait loci controlling powdery mildew resistance in Mungbean (<Emphasis Type="Italic">Vigna radiata</Emphasis> (L.) Wilczek)

Powdery mildew disease in mungbean is caused by the fungus, Erysiphe polygoni D.C. We identified two quantitative trait loci (QTLs) controlling resistance to the disease in a RIL population of 190 F₇ lines. The population was developed from the cross between a susceptible cultivar, “Kamphaeng Saen 1” and a resistant line, “VC6468-11-1A”. Reaction to the disease was evaluated for resistance in field and greenhouse conditions. Results from analysis of variance revealed that 15 SSR loci on three linkage groups (LG) associated with the resistance. Composite interval mapping consistently identified two QTLs on two LGs, qPMR-1 and qPMR-2, conferring the resistance. qPMR-1 and qPMR-2 accounted for 20.10 and 57.81% of the total variation for plant response to the disease, respectively. Comparison based on common markers used in our and previous studies suggested that qPMR-2 is possibly the same as the major QTL reported earlier using another resistant source. The SSR markers flanking and closely linked to qPMR-1 (CEDG282 and CEDG191) and qPMR-2 (MB-SSR238 and CEDG166) are useful for marker-assisted selection for mungbean resistance to powdery mildew.     

Successful induction of trigenomic hexaploid <Emphasis Type="Italic">Brassica</Emphasis> from a triploid hybrid of <Emphasis Type="Italic">B.</Emphasis><Emphasis Type="Italic">napus</Emphasis> L. and <Emphasis Type="Italic">B. nigra</Emphasis> (L.) Koch

A triploid hybrid with an ABC genome constitution, produced from an interspecific cross between Brassica napus (AACC genome) and B. nigra (BB genome), was used as source material for chromosome doubling. Two approaches were undertaken for the production of hexaploids: firstly, by self-pollination and open-pollination of the triploid hybrid; and secondly, by application of colchicine to axillary meristems of triploid plants. Sixteen seeds were harvested from triploid plants and two seedlings were confirmed to be hexaploids with 54 chromosomes. Pollen viability increased from 13% in triploids to a maximum of 49% in hexaploids. Petal length increased from 1.3 cm (triploid) to 1.9 cm and 1.8 cm in the two hexaploids and longest stamen length increased from 0.9 cm (triploid) to 1.1 cm in the hexaploids. Pollen grains were longer in hexaploids (43.7 and 46.3 μm) compared to the triploid (25.4 μm). A few aneuploid offsprings were also observed, with chromosome number ranging from 34 to 48. This study shows that trigenomic hexaploids can be produced in Brassica through interspecific hybridisation of B. napus and B. nigra followed by colchicine treatment.     

Mapping QTLs for grain quality using an introgression line population from a cross between <Emphasis Type="Italic">Oryza sativa</Emphasis> and <Emphasis Type="Italic">O. rufipogon</Emphasis>

Quantitative trait loci (QTL) associated with four milling recovery properties, two chemical properties, six paste properties of grain, and six textural parameters of cooked rice were identified using an introgression line (IL) population of rice developed from an interspecific cross over two years. The IL population consisted of 121 lines from a cross between wild rice (O. rufipogon Griff.) and a japonica cultivar. A total of 28 QTLs were identified for the 14 traits using inter mapping. Of these, 10 were significant over two years indicating that these QTLs are stable across years and environments. For eight (21%) of the QTLs identified, the O. rufipogonderived alleles contributed a desirable effect on amylose content, protein content, minimum viscosity, final viscosity, and consistency. Among these, pc3 for protein content and ac7 for amylose content were significant in both years and showed an R² value of 25.5 and 30.9%, respectively. The markers closely associated with these useful alleles can be used to trace the inheritance of specific chromosome segments in the IL population and also offer a starting point for map-based cloning of genes underlying these traits.     

Genetics of resistance to <Emphasis Type="Italic">Cucumber mosaic virus</Emphasis> in <Emphasis Type="Italic">Cucumis sativus</Emphasis> var. <Emphasis Type="Italic">hardwickii</Emphasis> R. Alef

The genetics of resistance to Cucumber mosaic virus (CMV) in Cucumis sativus var. hardwickii R. Alef, the wild progenitor of cultivated cucumber was assessed by challenge inoculation and by natural infection of CMV. Among the 31 genotypes of C. sativus var. hardwickii collected from 21 locations in India the lowest mean percent disease intensity (PDI) was recorded in IC-277048 (6.33%) while the highest PDI was observed in IC-331631 (75.33%). All the four cultivated varieties (DC-1, DC-2, CHC-1 and CHC-2) showed very high PDI and susceptible disease reaction. Based on mean PDI, 8 genotypes were categorized as resistant, 13 as moderately resistant, 9 as moderately susceptible and one as susceptible. A chi-square test of frequency distribution based on mean PDI in F₂ progenies of six resistant × susceptible crosses revealed monogenic recessive Mendelian ratio 1(R):3(S) to be the best fit. This monogenic recessive model was further confirmed by 1(R):1(S) ratio as the best fit for back cross with resistant parent and no fit for either 3:1 or 1:1 in the back cross with the susceptible parent. The results revealed that CMV resistance in C. sativus var. hardwickii was controlled by a single recessive gene. Considering the cross compatibility between C. sativus var. hardwickii and cultivated cucumber, the resistance trait can be easily transferred to cultivated species through simple backcross breeding.     

Resynthesizing <Emphasis Type="Italic">Brassica napus</Emphasis> from interspecific hybridization between <Emphasis Type="Italic">Brassica rapa</Emphasis> and <Emphasis Type="Italic">B. oleracea</Emphasis> through ovary culture

Using three varieties of Brassica rapa, cv. Hauarad (accession 708), cv. Maoshan-3 (714) and cv. Youbai (715), as the maternal plants and one variety of B. oleracea cv. Jingfeng-1 (6012) as the paternal plant, crosses were made to produce interspecific hybrids through ovary culture techniques. A better response of seed formation was observed when ovaries were cultured in vitro at 9–12 days after pollination on the basal MS and B5 media supplemented with 6-benzylaminopurine (BA) and naphthylacetic acid (NAA). The best response was observed for cross 714×6012 with the rate of seeds per ovary reaching 43.0%. Seeds for cross 715×6012 showed the best germination response (66.7%) on the regeneration medium (MS+1.0 mg l^–1 BA+0.05 mg l^–1 NAA). In all three cross combinations, good response in terms of root number and length of plants was observed on the root induction medium (MS+1.0 mg l^–1 BA+0.1 mg l^–1 NAA). A better response was observed for the regenerated plants cultured for 14 days than for 7 days. The ovary-derived plants with well-developed root system were hardened for 8 days and their survival rate reached over 80%. Cytological studies showed that the chromosome number of all plants tested was 19 (the sum of both parents), indicating that these regenerated plants were all true hybrids of B. rapa (n = 10) × B. oleracea (n = 9). The regenerated plants were doubled with colchicine treatment, and the best response in the crosses 708×6012, 714×6012 and 715×6012 was observed when treated with 170 mg l^–1 colchicine for up to 30 h and their doubling frequency reached 52, 56 and 62%, respectively.     

Identification of resistant sources against <Emphasis Type="Italic">Sclerotinia sclerotiorum</Emphasis> in <Emphasis Type="Italic">Brassica</Emphasis> species with emphasis on <Emphasis Type="Italic">B. oleracea</Emphasis>

Stem rot caused by Sclerotinia sclerotiorum is one of the most devastating diseases of rapeseed (Brassica napus L.) which causes huge loss in rapeseed production. Genetic sources with high level of resistance has not been found in rapeseed. In this study, 68 accessions in six Brassica species, including 47 accessions of B. oleracea, were evaluated for leaf and stem resistance to S. sclerotiorum. Large variation of resistance was found in Brassica, with maximum differences of 5- and 57-folds in leaf and stem resistance respectively. B. oleracea, especially its wild types such as B. rupestris, B. incana, B. insularis, and B. villosa showed high level of resistance. Our data suggest that wild types of B. oleracea possess tremendous potential for improving S. sclerotiorum resistance of rapeseed.     

Seed trait evaluation of <Emphasis Type="Italic">Gossypium barbadense</Emphasis> L. chromosomes/arms in a <Emphasis Type="Italic">G. hirsutum</Emphasis> L. background

Investigation of cotton nutritional components is important because its seeds provide a useful nutritional profile and can possibly serve as a biofuel resource. In this study, five cultivars, 13 cotton chromosome substitution (CS-B) lines, their donor parent, '3-79', and their recurrent parent, 'TM-1', were evaluated for seed traits over four environments. A mixed linear model approach with the jackknife method was employed to estimate variance components and to predict genotypic effects for each seed trait. Genotypic effects were more important than genotype by environment interaction for all seed traits. Chromosome associations with these seed traits were detected using the comparative method by comparing the differences between each CS-B line and TM-1. For example, chromosome 4 of 3-79 in TM-1 background was associated with reduced seed index (SI), embryo percentage, protein percentage while associated with increased seed oil percentage and seed fiber percentage. Other chromosome associations with these seed traits were also observed in this study. SI was highly correlated with three seed index traits: seed protein index, seed oil index (OI), and seed fiber index. Lint percentage, boll number, and lint yield were positively correlated with protein percentage while negatively correlated with SI and OI. SI and seed fiber content exhibited negative correlations with micronaire but positive correlations with fiber length and strength. Results suggested that agronomic traits and seed nutrition components can be improved simultaneously.     

Dominant gene for common bean resistance to common bacterial blight caused by <Emphasis Type="Italic">Xanthomonas</Emphasis><Emphasis Type="Italic">axonopodis</Emphasis> pv. <Emphasis Type="Italic">phaseoli</Emphasis>

The common bacterial blight pathogen [Xanthomonas axonopodis pv. phaseoli (Xap)] is a limiting factor for common bean (Phaseolus vulgaris L.) production worldwide and resistance to the pathogen in most commercial cultivars is inadequate. Variability in virulence of the bacterial pathogen has been observed in strains isolated from Puerto Rico and Central America. A few common bean lines show a differential reaction when inoculated with different Xap strains, indicating the presence of pathogenic races. In order to study the inheritance of resistance to common bacterial blight in common bean, a breeding line that showed a differential foliar reaction to Xap strains was selected and was crossed with a susceptible parent. The inheritance of resistance to one of the selected Xap races was determined by analysis of segregation patterns in the F₁, F₂, F₃ and F₄ generations from the cross between the resistant parent PR0313-58 and the susceptible parent ‘Rosada Nativa’. The F₁, F₂ and F₃ generations were tested under greenhouse conditions. Resistant and susceptible F_3:4 sister lines were tested in the field. The statistical analysis of all generations followed the model for a dominant resistance gene. The resistant phenotype was found to co-segregate with the SCAR SAP6 marker, located on LG 10. These results fit the hypothesis that resistance is controlled by a single dominant gene. The symbol proposed for the resistance gene is Xap-1 and for the bacterial race, XapV1.     

A cytoplasmic-nuclear male-sterility system derived from a cross between <Emphasis Type="Italic">Cajanus cajanifolius</Emphasis> and <Emphasis Type="Italic">Cajanus cajan</Emphasis>

Cytoplasmic-nuclear male-sterility is an important biological tool, which has been used by plant breeders to increase yields in cross-pollinated cereals and vegetables by commercial exploitation of the phenomenon of hybrid vigor. In legumes, no such example exists due to the absence of an economic way of mass pollen transfer from male to female parent. Pigeonpea [Cajanus cajan (L.) Millsp.], however, is a different legume where a moderate level of insect-aided natural out-crossing (25–70%) exists and it can be used to produce commercial hybrid cultivars, if an efficient and stable cytoplasmic-nuclear male-sterility (CMS) system is available. This paper reports the development of a stable CMS system (ICP 2039A), derived from an inter-specific hybrid of Cajanus cajanifolius, a wild relative of pigeonpea, with a cultivar ICP 11501. Using this genetic material, designated as the A₄ cytoplasm, a number of fertility restorers and maintainers have been developed. The best short-duration experimental pigeonpea hybrid ICPH 2470 produced 3205 kg ha⁻¹ grain yield in 125 days, exhibiting 77.5% advantage over the control cultivar UPAS 120. At present, all the important biological systems necessary for a successful commercial hybrid breeding program are available in pigeonpea and the package of this technology has been adopted by private seed sector in India for the production and marketing of hybrid varieties.     

Diversity of <Emphasis Type="Italic">Xylella fastidiosa</Emphasis> host suitability among siblings from a non-traditional interspecific <Emphasis Type="Italic">Prunus</Emphasis> cross

Ten F₂ clones from an initial hybridization of Prunus webbii?×?Prunus persica cv Harrow Blood were evaluated under greenhouse conditions for their reaction to Xylella fastidiosa subsp. fastidiosa strain M23 during two growing seasons. Clonal accessions used for the study were selected on the basis of horticultural diversity, and were a small subset of trees from a large F₂ population. Foliar symptoms of M23-inoculated trees were monitored weekly throughout the 20-week growth period. Clones were then sampled for bacterial titer determinations. With the exception of parental accession Harrow Blood, all clones yielded measurable titer; however, almond leaf scorch disease symptoms were never observed in five of the ten sibling clonal accessions. Vegetative bud break and bloom phenology data collected from field-grown mother trees over a 7 year period as well as leaf morphology characters of the clonal accessions were examined for associations with bacterial titers of inoculated clones using a principal components analysis. No clear associations were noted, with small sample size limiting the predictive ability of the analysis.