Flavor release and perception in hard candy: influence of flavor compound-compound interactions

The influence of flavor compound-compound interactions on flavor release properties and flavor perception in hard candy was investigated. Hard candies made with two different modes of binary flavor delivery, (1) L-menthol and 1,8-cineole added as a mixture and (2) L-menthol and 1,8-cineole added separate from one another, were analyzed via breath analysis and sensory time-intensity testing. Single-flavor candy containing only L-menthol or 1,8-cineole was also investigated via breath analysis for comparison. The release rates of both L-menthol and 1,8-cineole in the breath were more rapid and at a higher concentration when the compounds were added to hard candy separate from one another in comparison to their addition as a mixture (conventional protocol). Additionally, the time-intensity study indicated a significantly increased flavor intensity (measured as overall cooling) for hard candy made with separate addition of these flavor compounds. In conclusion, the flavor properties of hard candy can be controlled, at least in part, by flavor compound-compound interactions and may be altered by the method of flavor delivery.     

Influence of flavor solvent on flavor release and perception in sugar-free chewing gum

The influence of flavor solvent [triacetin (TA), propylene glycol (PG), medium chained triglycerides (MCT), or no flavor solvent (NFS)] on the flavor release profile, the textural properties, and the sensory perception of a sugar-free chewing gum was investigated. Time course analysis of the exhaled breath and saliva during chewing gum mastication indicated that flavor solvent addition or type did not influence the aroma release profile; however, the sorbitol release rate was statistically lower for the TA formulated sample in comparison to those with PG, MCT, or NFS. Sensory time-intensity analysis also indicated that the TA formulated sample was statistically lower in perceived sweetness intensity, in comparison with the other chewing gum samples, and also had lower cinnamon-like aroma intensity, presumably due to an interaction between sweetness intensity on aroma perception. Measurement of the chewing gum macroscopic texture by compression analysis during consumption was not correlated to the unique flavor release properties of the TA-chewing gum. However, a relationship between gum base plasticity and retention of sugar alcohol during mastication was proposed to explain the different flavor properties of the TA sample.     

Effect of beta-cyclodextrin on aroma release and flavor perception

Binding and release of volatile compounds to and from beta-cyclodextrin were measured in model aqueous systems using static equilibrium headspace and dynamic headspace dilution. Beta-cyclodextrin decreased the static equilibrium headspace for some volatiles (e.g., ethyl octanoate and decanone) due to binding, but dilution studies demonstrated that binding was readily reversible. Dynamic release of hydrophobic volatile compounds was similar to that observed from emulsions. When beta-cyclodextrin was added to fat free yogurt, the release of a commercial lemon flavoring was modified and was similar to release from a regular fat yogurt. Sensory difference testing confirmed the release results. The data demonstrate that beta-cyclodextrin can be used to modify flavor delivery in both model and real systems; the effects in the latter are sensorially significant.     

Flavor release and perception of flavored whey protein gels: perception is determined by texture rather than by release

Five whey protein gels, with different gel hardnesses and waterholding capacities, were flavored with ethylbutyrate or diacetyl and evaluated by a 10-person panel to study the relation between the gel structure and the sensory perception, as well as the nosespace flavor concentration during eating. The sensory perception of the flavor compounds was measured by the time-intensity method, while simultaneously the nosespace flavor concentration was monitored by the MS-Nose. The nosespace flavor concentration was found to be independent of the gel hardness or waterholding capacity. However, significant changes in flavor intensity between the gels were perceived by the majority of the panelists, despite the fact that the panelists were instructed to focus only on flavor perception and to not take texture into account. From these observations it is concluded that the texture of gels determines perception of flavor intensity rather than the in-nose flavor concentration.     

Flavor perception and aroma release from model dairy desserts

Six model dairy desserts, with three different textures and two sucrose levels, were equally flavored with a blend of four aroma compounds [ethyl pentanoate, amyl acetate, hexanal, and (E)-2-hexenal] and evaluated by a seven person panel in order to study whether the sensory perception of the flavor and the aroma release during eating varied with the textural characteristics or the sweetness intensity of the desserts. The sensory perception was recorded by the time intensity (TI) method, while the in vivo aroma release was simultaneously measured by the MS-nose. Considering the panel as a whole, averaged flavor intensity increased with sucrose level and varied with the texture of the desserts. Depending on the aroma compound, the averaged profile of in vivo aroma release varied, but for each aroma compound, averaged aroma release showed no difference with the sucrose level and little difference with the texture of the desserts. Perceptual sweetness-aroma interactions were the main factors influencing perception whatever the texture of the desserts.     

Sweetener/sweetness-induced changes in flavor perception and flavor release of fruity and green character in beverages

Green leaf volatile (GLV) mixtures, commercial orange flavors, and commercial strawberry flavors were applied to beverage bases in which concentrations of citric acid as well as a sweetener (sucrose or aspartame/acesulfame-K) were varied. Sensory profiling showed that flavor-specific fruity character increased as perceptible sweetness increased, independent of whether the sweetness resulted from sucrose (a change from 9 to 12 Brix) or aspartame/acesulfame-K (a change from 0.2 to 0.4 Brix). Sweetness was affected only by the tastants in the base and not by the flavors, although flavor-specific interactions between sweetener type and sweetener level occurred. Flavor release from the sucrose bases was compared to flavor release from bases containing aspartame/acesulfame-K by static headspace measurements and by MS-Nose measurements using an artificial throat. These measurements showed greater flavor volatility from bases having low Brix (fewer soluble solids). This negative Brix effect was also evident in the sensory data for perception of some GLV green notes. The headspace data could not support a positive Brix effect, the typical salting out, which would correspond to the observed perceptual enhancement of fruity notes.     

The effect of solvent interactions on alpha-, beta-, and gamma-cyclodextrin/flavor molecular inclusion complexes

Three commonly used flavor industry solvents (propylene glycol, triacetin, and triethyl citrate) were tested for their capacity to interfere with the ability of alpha-, beta-, and gamma-cyclodextrin to form molecular inclusion complexes with flavors. Six flavor compounds (ethyl butyrate, ethyl heptanoate, l-menthol, methyl anthranilate, neral, and geranial) were measured by headspace gas chromatography above 2:1 water/ethanol containing appropriate additions of cyclodextrin and flavor solvent. The smallest and most polar solvent molecule represented by propylene glycol had the least effect on cyclodextrin/flavorant complex formation. In contrast, triacetin, intermediate in size among the three flavor diluents studied, had the greatest effect, even though, based on at least some computed molecular parameters, it appears to be more polar than triethyl citrate. The explanation for this apparent anomaly may lie in differences in the extent to which triacetin and triethyl citrate are able to interact with cyclodextrins by means of partial interaction with the hydrophobic cavities of the latter.     

Mechanisms of flavor release in chewing gum: cinnamaldehyde

Recently we reported that the release profile of cinnamaldehyde from a sugar-free chewing gum was correlated to the release of the sugar alcohol phase or was not in agreement with the log P model. The objective of this study was therefore to investigate mechanisms of cinnamaldehyde release from a sugar-free chewing gum; p-cresol (similar log P value) was also analyzed for comparison. Breath analysis of the chewing gum samples over an 8 min consumption period reported that the maximum concentration of cinnamaldehyde was 2- to 3-fold higher during the initial phase of mastication in comparison to the later phase, whereas the concentration of p-cresol was relatively constant over these two time periods. By contrast the release profile of cinnamaldehyde from a flavored gum base (no sugar alcohol phase) was constant over the 8 min consumption period and similar to the release of cresol from the flavored gum base. On the basis of tandem mass spectrometry, cinnamaldehyde was reported to react with sorbitol and generate hemiacetal reaction products that were not stable under slight alkaline conditions; it was suggested to revert back to free cinnamaldehyde and sugar alcohol in the oral cavity. The increased polarity of these transient cinnamaldehyde-sorbitol hemiacetal reaction products would result in a more rapid release rate of cinnamaldehyde than would be typically predicted based on the affinity of cinnamaldehyde for the gum base.     

Flavor release from iota-carrageenan matrices: a kinetic approach

Release of aroma compounds in selected iota-carrageenan systems was studied by static headspace analysis. By varying the sodium chloride content, different rheological behaviors were obtained ranging from solution to gel. From the release curves, mass transfer (h(D)) and partition coefficients (K(ga)) of ethyl butanoate, ethyl hexanoate, and linalool were extracted using a mathematical model based on the penetration theory. This model, previously developed for flavor release from stirred solutions, was found to fit well the data obtained from structured systems (nonstirred conditions) at the beginning and at the end of the release curves: this allowed the determination of h(D) and K(ga). Matrix effects appeared to be dependent on the chemical class of the compounds. For the alcohol, the main effect on both equilibrium partitioning and mass transfer across the interface was ascribed to a salting effect. In the opposite, for esters, iota-carrageenan addition induced an increase of aroma retention and also a slower transfer across the interface. The respective effects of an increasing viscosity of the medium and of the formation of a tridimensionnal network are discussed.     

The role of fat in flavor perception: effect of partition and viscosity in model emulsions

Decreasing the fat content of a food, while maintaining the same aroma content, changes both aroma release (due to partition effects) and the viscosity of the food. To understand the relative contribution of these two factors on flavor perception, a series of flavored emulsions were prepared to control aroma release and viscosity using different aroma, oil, and hydroxypropyl methyl cellulose (HPMC) contents. Samples were formulated to deliver the same aroma-release in vitro and in vivo, and their viscosity was measured using the Kokini oral shear stress parameter. Despite the in vivo aroma release being constant, there were perceptual differences between the samples, and the flavor intensity decreased as in-mouth viscosity increased. For these iso release samples, the Kokini oral shear stress parameter correlated well with the decrease in perception, suggesting that there may be a viscosity stimulus or that the viscosity affects release of tastant and hinders aroma-taste interactions.     

Factors affecting the release of flavor encapsulated in carbohydrate matrixes

The effects of water content and temperature variation on the release of flavor components into the headspace over flavors, encapsulated by an extrusion process, in low water content carbohydrate matrixes is studied. The largest amounts of release occurred when the matrix was above its glass transition temperature, whether this was due to increased water content or elevated temperature. Under these conditions up to 70% of the sucrose in the matrix crystallized over a period of 10 days, as quantified using Fourier transform Raman spectroscopy. Smaller amounts of headspace release occurred when the water content of the encapsulated flavor system was decreased from 3. 5 to 3.1% w/w. Small amounts of release occurred from the "as prepared" materials, which were associated with the presence of small amounts of unencapsulated flavor oil with direct access to the headspace. It was concluded that release due to matrix permeability was relatively slow as compared with the above mechanisms.     

Headspace GC and sensory analysis characterization of the influence of different milk additives on the flavor release of coffee beverages

Previous investigations of coffee flavor have been confined to the analysis of the aroma substances. These investigations showed that about 30 volatile compounds were substantially responsible for the coffee flavor. The aim of this study was to investigate the influence of different milk additives and one coffee whitener on the release of flavor impact compounds from coffee beverages. For the investigation of these effects an external static headspace technique was developed. With this technique the most potent odorants of the coffee beverage were determined. Analyses were performed by gas chromatography/olfactometry, flame ionization detection, and mass spectrometric detection. In addition, sensory studies of the odor profiles were performed. Milk and vegetable products as additives for coffee beverages affected the release of aroma substances in the brew through their lipid, protein, and carbohydrate components. All beverages with an additive showed reduced, but typical, odor profiles for each additive.     

Flavor release from salad dressings: sensory and physicochemical approaches in relation with the structure

The effect of process and formulation on sensory perception and flavor release was investigated on salad dressing models. Oil/vinegar emulsions (phi = 0.5, droplet size > 10 microm) with thickeners and a whey protein concentrate were prepared with different fat droplet sizes and different distributions of fat droplet size. The effect of the amount of emulsifier was also tested. Sensory profile analysis was performed by a trained panel and flavor release quantified by dynamic headspace analysis. When the droplet size is increased, the lemon smell and citrus aroma significantly increase, whereas the egg note, mustard, and butter aroma significantly decrease. The concentrations of alcohols and acids significantly increase when droplet size increases, whereas those of other compounds such as limonene or benzaldehyde significantly decrease. The dispersion of the droplet size has a small effect on flavor perception, and the effect of the increase of the amount of emulsifier is noticed only by instrumental analysis.     

Complex coacervates for thermally sensitive controlled release of flavor compounds

To improve the appeal of frozen baked foods upon heating, we have encapsulated flavor oil in complex coacervate microcapsules using gelatin and gum Arabic. Variation of polyion concentrations and homogenization rate affected particle morphology, size distribution, and oil release upon heating. Release of the oil from formulations was determined by a simple spectroscopic method based on separation of oil labeled with a lipophilic dye from unaffected particles. When heated to 100 degrees C or higher, univesicular microcapsules (prepared with a lower homogenization rate) released almost all of the encapsulated oil, while multivesicular microcapsules (produced by high homogenization rates) resulted had lesser degrees of release. The oil remained encapsulated during 4 weeks of storage at 4 and -20 degrees C (freezing and thawing) but was released by exposure to 100 mM NaCl at room temperature. When particles were cooled after releasing their oil content, the oil was re-encapsulated.     

Formation of flavor oil microemulsions, nanoemulsions and emulsions: influence of composition and preparation method

This study aimed to establish conditions where stable microemulsions, nanoemulsions or emulsions could be fabricated from a nonionic surfactant (Tween 80) and flavor oil (lemon oil). Different colloidal dispersions could be formed by simple heat treatment (90 °C, 30 min) depending on the surfactant-to-oil ratio (SOR): emulsions (r > 100 nm) at SOR < 1; nanoemulsions (r < 100 nm) at 1 < SOR < 2; microemulsions (r < 10 nm) at SOR > 2. Turbidity, electrical conductivity, shear rheology, and DSC measurements suggested there was a kinetic energy barrier in the oil-water-surfactant systems at ambient temperature that prevented them from forming metastable emulsion/nanoemulsion or thermodynamically stable microemulsion systems. High energy homogenization (high pressure or ultrasonic homogenizer) or low energy homogenization (heating) could be used to form emulsions or nanoemulsions at low or intermediate SOR values; whereas only heating was necessary to form stable microemulsions at high SOR values.     

Flavor release and rheology behavior of strawberry fatfree stirred yogurt during storage

The influence of storage on the aroma release in headspace and rheological properties in strawberry-flavored fatfree stirred yogurts was determined. Three periods of storage at 10 degrees C were chosen for analysis: 7, 14, and 28 days. The headspace composition was assessed in a flask in static mode. The SPME fiber was carefully chosen, and results are presented in detail (choice and degradation). The flow properties of the final product were measured in order to follow n (flow behavior index) and K (consistency index), and the apparent viscosity was determined (eta in Pa.s). The quantity of flavors in the headspace of products at the 28 days of aging was significantly weaker for methyl 2-methyl butanoate, ethyl hexanoate, and hexyl acetate. The decrease was half of that in comparison with the seventh day. It was supposed that modification in rheological parameters can partly explain these results. Indeed, the apparent viscosity of the products significantly increased during the three times of storage. The composition of the flavored yogurt, proteins, exopolysaccharides, and fruit preparation, seemed to have a great impact on the release of aroma compounds. The aroma compound amount in the headspace decreased when the matrix changed from water to yogurt. With the fruit preparation, the headspace amounts for esters were significantly lower than in water alone, respectively, 23, 27, 29, and 17% less for methyl 2-methylbutanoate, ethyl hexanoate, hexyl acetate, and benzyl acetate. In flavored yogurt, the amount of aroma compounds in the headspace decreased again in comparison with the result obtained with the fruit preparation. Ethyl hexanoate and hexyl acetate presented the higher decreases of 48 and 53%, respectively.     

Flavor encapsulation in yeasts: limonene used as a model system for characterization of the release mechanism

Empty yeast cells are used as a new delivery system for flavor encapsulation. The flavor release mechanism from yeast cells is characterized using a series of analytical techniques, and limonene is used as a model representing a hydrophobic flavor. Furthermore, the thermal stability of the capsules was assessed. The characterization of the cell wall structure gives rise to the development of an empirical model explaining water adsorption as well as the desorption singularities observed on drying. The study of the rate of flavor release as a function of temperature and water uptake in the cell wall clearly demonstrated a particular behavior of the yeast cell wall permeability. Below a water activity around 0.7, no flavor release is permitted whereas release occurs above it. Surface analysis on dry or wet cells using atomic force microscopy is discussed.     

Use of catalyst in a 3D-QSAR study of the interactions between flavor compounds and beta-lactoglobulin

This paper reports a 3D-QSAR study using Catalyst software to explain the nature of interactions between flavor compounds and beta-lactoglobulin. A set of 35 compounds, for which dissociation constants were previously determined by affinity chromatography, was chosen. The set was divided into three subsets. An automated hypothesis generation, using HypoGen software, produced a model that made a valuable estimation of affinity and provided an explanation for the lack of correlation previously observed between the hydrophobicity of terpenes and the affinity for the protein. On the basis of these results, it appears that aroma binding to beta-lactoglobulin is caused by both hydrophobic interactions and hydrogen bonding, which plays a critical role. Catalyst appears to be a reliable tool for the application of 3D-QSAR study in aroma research.