Estimating potato yield responses from chemical control of early blight in Minnesota

The effect of early blight on tuber yield of two potato (Solanum tuberosum L.) cultivars (Russet Burbank and Norland) was evaluated using number and timing of applications of three chemicals to generate different disease epidemics in 1981 and 1982. Under the non-irrigated farming conditions in Minnesota, there were no significant differences among captafol, triphenyltin hydroxide and maneb-Zn in blight control to increase yield. Of the five spray schedules tested, a 7–10 day spray schedule initiated when blight severity exceeded 0.01%, and a 7–10 day schedule initiated when blight was found above the lower third of the plant, generally gave significant, positive yield responses with all three chemicals. At Rosemount in 1982, the greatest yield increases (relative to unsprayed) obtained were 34.9% and 48.6% in total tuber yields for Norland and Russet Burbank, respectively. At Rosemount in 1982, the highest yield increases (relative to unsprayed) obtained were 92.2% and 56.6% in total tuber yields for Norland and Russet Burbank respectively. At Grand Forks in 1981, the highest yield increases were 126.8% and 34.6% in total tuber yields for Norland and Russet Burbank respectively. Across all three experiments, maximum yield losses (percentage of [[yield of ‘healthy’—yield of unsprayed check]/yield of ‘healthy’’]) were 58.4% (US #1 tubers) and 55.9% (total tubers) for cv. Norland and 34.4% (US #1 tubers) and 36.2% (total tubers) for cv. Russet Burbank.     

Comparative growth analysis of Russet Burbank potatoes at two Idaho locations

Detailed growth analyses were conducted with Russet Burbank potato to provide validation and parameterization data for a computer growth model being developed cooperatively at the University of Idaho and University of California, Davis. At each of two locations (Aberdeen and Kimberly, Idaho) plants were sampled seven times at about two-week intervals. Plants were separated into individual leaf blades, petioles, internodes, tubers, and roots. Leaf area indices and leaf elevation angles were determined in 20 cm strata. Plants at Kimberly emerged approximately 10 days prior to those at Aberdeen. At both locations, the increase in total dry weight was curvilinear for 30–40 days after emergence and then was linear until the end of the study. The maximum top weight per hill was slightly higher at Aberdeen, but near-maximum values occurred for much longer at Kimberly. Total leaf area at Aberdeen reached a maximum of approximately 4.0, while the maximum at Kimberly was 5.5. Root dry weight reached a maximum much earlier at Kimberly and the change in root dry weight paralleled that of tops in both places. Tuber initiation occurred approximately 19 June at both locations. Following an initial increase, tuber number/hill decreased for several weeks. Final tuber numbers per hill were approximately six at Aberdeen and 12 at Kimberly. Dry weight per tuber showed a curvilinear increase for 20–30 days and then was constant at 0.68 and 0.37 g/tuber.day at Aberdeen and Kimberly, respectively. Bulking rates were 17 and 21 g/m².day. Final yields were 39 T/ha at Aberdeen and 49 T/ha at Kimberly. The higher final tuber yield at Kimberly was the result of a higher rate of bulking and a longer leaf area duration.     

Maximum potential potato yield in the Columbia Basin,USA: Model and measured values

Maximum yields of potato tubers for growing conditions in the Columbia Basin, Washington, USA were estimated using two methods. The first was based on experimental data from a large number of experiments conducted each year from 1959 through 1973 with Russet Burbank potatoes. The highest yielding plots each year were selected, and boundary analysis was used to determine the relationship between growing season length and maximum yield. Maximum yield was found to be related to growing season length by Y = D - 36 where Y is tuber yield in t/ha and D is days since planting. The second method was based on a model which assumes that dry matter production of a crop is proportional to intercepted radiation. This model has been validated for Scottish growing conditions. The solar radiation conversion efficiency for Russet Burbank potatoes under Columbia Basin conditions was found to be 1.35 g/MJ, using boundary analysis. The model gave better agreement between predicted and measured boundary values than did the simpler model based only on growing season length. Agreement was better, particularly at the end of the growing season when days were shorter and cooler than in the summer. Maximum measured yield was 124 t/ha. The simple model predicted maximum yields around 160 t/ha, while the MW model predicted maximum values around 140 t/ha.     

Relationships between numbers of main stems and yield components of potato (Solanum tuberosum L. cv. Erntestolz) as influenced by different daylengths

Summary The relationshops between numbers of main stems and some measures of growth and yield, as well as total tuber yield, were examined for potatoes grown under different daylengths. Leaf area, tuber number and tuber yield per plant increased significantly with increasing daylength and number of main stems. Numbers of main stems and leaf area were correlated positively with tuber number and tuber yield and negatively with average tuber weight. The correlations were stronger with stem number than with leaf area and were differently affected by daylength. Standard regression coefficients indicated that stem number has strong positive and negative relationships with tuber number and average tuber weight, respectively. Since tuber number was a better determinant of yeild than average tuber weight, the final relationship between the numbers of main stems and tuber yield remained positive for all daylengths. Determinants that will best explain variation in tuber total yield, tuber number, and average tuber weight are suggested.     

Comparison of various weed control programs for potatoes

All weed control programs resulted in satisfactory weed control. Costs of controlling weeds ranged from $10 to $93/ha. Cultivation alone was the cheapest method of controlling weeds. Controlling weeds by using herbicides alone with no cultivation resulted in the highest weed control costs but tended to give the best weed control at harvest. Herbicides saved one to two cultivations. EPTC (S-ethyl dipropylthiocarbamate) gave slightly better control of green foxtail [Setaria viridis (L.) Beauv.] and slightly poorer control of broadleaf weeds than trifluralin (α,α,α,-trifluoro-2,6-dinitro-N, N-dipropyl-p-toluidine). Cultivation helped control weeds but had no other apparent beneficial or adverse effect on potatoes. The correlation coefficient between total tuber yield and dry weight of weeds was ?0.97 at Grand Forks, North Dakota and ?0.85 at Casselton, North Dakota.     

The influence of defoliation date and harvest interval on the quality of potatoes for french fry production

Summary Trials were carried out in 1984, 1985 and 1986 in which the effect of four dates of defoliation (0, +10, +20, +30 days) and three intervals to harvest (0, +10, +20 days) on yield, tuber size, dry matter, reducing sugar, fry test colour and finish fried sensory quality were examined for two cultivars (Pentland Dell, Maris Piper) on two sites (medium silt, peaty loam). Dry matter content and yield of tubers were influenced by all factors in the trial. Later dates of defoliation gave the lowest reducing sugar levels, palest fry colour, highest yield and dry matter content. Increasing the interval from defoliation to harvest reduced dry matter and raised yield. Significant year effects were obtained for dry matter and reducing sugar content.     

株行距和施肥量对木薯产量及生长的影响

采用裂区试验设计方法,研究株行距和施肥量对华南5号木薯产量和生长的影响.结果表明:在本试验株行距和施肥量条件下,施肥量对木薯产量和生长的影响比株行距大.密植(0.6～0.8 m)有利于提高淀粉产量、鲜薯产量和鲜薯淀粉含量,以0.8m株行距最佳,而疏植(1.2～1.4m)有利于提高单株薯数、单株鲜薯重、单株鲜茎叶重、收获指数和茎径.施肥有利于提高淀粉产量、鲜薯产量、单株鲜薯重、单株鲜茎叶重、茎径、株高和单株薯数,但降低鲜薯淀粉含量和收获指数.丰产栽培技术要兼顾单位面积株数、单株鲜薯重和鲜薯淀粉含量.建议在土壤肥力差和少施肥时,用0.6 m株行距;土壤肥力中等且较高施肥时.采用0.8 m株行距;土壤肥力中上且优越水肥管理,采用1.0 m株行距.     

Harvest management based on leaf stage of a tetraploid vs. a diploid cultivar of annual ryegrass

Leaf stage‐dependent defoliation is linked to the plant's physiological status and may be a more suitable criterion than time‐based intervals for harvesting forage grasses, but no reports of research with annual ryegrass (Lolium multiflorum Lam. var. westerwoldicum) were found. To address this, a 2‐year field study was carried out at Raymond, MS, on a Loring silt loam soil (fine‐silty, mixed, thermic Typic Fragiudalfs). Forage production, morphological characteristics and nutritive value responses to defoliation based on leaf stage (2, 3 and 4 leaves per tiller) and two residual stubble heights (RSH; 5 and 10 cm) of a tetraploid (“Maximus”) vs. a diploid (“Marshall”) cultivar of annual ryegrass were quantified. Forage harvested, in 2011, increased linearly as leaf stage increased from 7.3 to 8.8 Mg/ha, but during 2012 was least (7.0 Mg/ha) at 3‐leaf stage and similar at the other two leaf stages (7.6 Mg/ha). Tiller density was less for Maximus (1,191 tillers/m²) than for Marshall (1,383 tillers/m²). Leaf blade proportion decreased with increasing leaf stage and was greater by 9% for Maximus than for Marshall. Generally, forage nutritive value became less desirable with increasing leaf stage. There was a dichotomy in forage harvested and nutritive value responses, but maximum forage productivity was achieved when annual ryegrass was defoliated at the 4‐leaf stage interval.     

马铃薯器官生长发育与产量形成的研究

马铃薯叶面积、叶干重以及块茎干物重和块茎体积的变化动态均符合三次曲线变化 ,地上茎干重、茎粗、株高符合S型曲线变化 ,其中 ,叶干重的峰值早于叶面积的峰值 ,块茎体积的增长则在出苗后 5 5～ 70d内最快。马铃薯地上茎的生长主要是伸长与充实 ,但伸长较充实缓慢、持续时间更长。匍匐茎与块茎的形成是马铃薯产量形成的前提条件 ,二者的建成与植株其它器官的生长发育密切相关 :匍匐茎和块茎的形成与叶片和地上茎形成时期并进 ,所以 ,马铃薯块茎的建成与地上营养器官的生长发育存在着光合产物的竞争 ,但地上部器官的建成依然是产量形成的物质基础。     

Planting materials for warm tropic potato production: growth and yield of transplanted seedlings or rooted cuttings and tuber materials in the field

Expansion of potato production in lowland tropical regions has been constrained by the lack of planting materials, given that adapted genotypes and suitable field management practices now exist.

The respective performance of transplanted materials (i.e., true potato seed (TPS) seedlings or rooted stem cuttings) produced in situ in the warm tropics were compared with that of genetically identical seedling tubers (tubers produced from seedlings) or seed tubers. Seed and seedling tubers had been previously produced under optimal cool conditions. Transplanted materials achieved lower maximum leaf area index than did tuber materials (1.3–2.2 vs. 2.7) but relative growth rates of cuttings and seedlings were greater. This was in part due to the greater net assimilation rate of cuttings and to greater leaf:stem ratio for both compared with plants originating from tubers. Stolon and tuber formation were greater in seed tubers than in cuttings and in seedlings versus seedling tubers. On average, seedlings produced 14 tubers per plant, apical cuttings 12, seedling tubers 8, and stem cuttings 6.

Tuber yields within a genotype were statistically similar for crops from seed tubers or cuttings and for crops from seedling tubers or seedlings. However, the proportion of marketable (i.e., > 3.5 cm diameter) tubers was approximately 12% less in the crops from seed tuber and seedlings compared with those from cuttings and seedling tubers, respectively. Within a genotype, the crop duration in the field was similar whatever the type of planting material. Maximum yields, at 23 t/ha in warm sites, were still below those of temperate potato crops, but could be achieved equally well with transplanted in situ-produced materials or imported cool-climate seed tubers.     

Potato production on wide beds: Impact on yield and selected soil physical characteristics

Planting three rows of potatoes in a bed the width of two conventional rows offers an easily managed way to increase seed piece populations, with the potential of increasing tuber yield and enhancing tuber quality. A wide bed production system (3 rows of potatoes planted on a 1.9 m flat-topped raised bed) was compared to a conventional-ridged system (1 row of potatoes in sharply sloped ridges on 96 cm centers) in 1996 and 1997 on a Norfolk sandy loam soil and a Portsmouth fine sandy loam soil in eastern North Carolina. Potato plant stands, leaf area index at approximately 9 WAP, yield, and quality were measured. Soil temperature, soil moisture, and cone index, as a measure of soil penetration resistance, were also measured, wide beds were more moist than conventional ridges early in the season. Cone index was greater throughout the root profile in wide beds in two of three tests. The row on the west side of an individual wide bed was most similar to conventional ridges in daily soil temperature fluctuations between minimum and maximum temperatures, and had greater fluctuations than the middle and eastern rows of the wide bed. Total yield and yield of grade A potatoes were not significantly different between wide beds and conventional ridges at either site. At one site, yield of grade B potatoes was significantly less in the wide bed; among the three rows in the wide bed, the eastern row had significantly lower yield of grade B potatoes. Conventional ridges had a higher percent of green grade A potatoes than the wide beds in one of three trials. Under North Carolina conditions, changing production systems would be unadvisable for most growers because wide beds do not increase yield enough to justify spending the money for more seed and to change equipment.     

Analysis of growth in Kennebec with emphasis on the relationship between stem number and yield

The basis of differences in tuber yield of potato cv. Kennebec, due to varying stem numbers per plant, was studied by measuring changes in leaf-area and dry weight throughout the season. Initially the dry weight yield of tubers was related to leaf-area but following the attainment of maximum leaf-area this relationship no longer held. The final yield of tubers was shown to depend mainly on the net assimilation rate (E) late in the season. At this time E was controlled by the sink demands of the bulking tubers and these in turn were influenced by tuber number. Yields increased as the number of stems increased through one, two and four per plant-hill.     

Influence of plant spacing on potato (Solanum tuberosum L.) morphology,growth and yield under two contrasting environments

Summary In experiments at a temperate (43^oN) and a tropical (14^oN) location, closer plant spacing decreased stem branching, root growth, and mean tuber size but increased tuber yields per ha. Closer spacing increased plant height at the temperate site but decreased it at the tropical site where canopy cover did not reach 100%. The increased branching at the wider spacing did not compensate for fewer plants/m². Total and tuber weight per plant increased with wider spacing and was much greater under temperate than tropical conditions. Tuber yield/stem also increased with lower stem densities. Although these results provide initial data for modelling, the contrast between the two environments and interactions between spacing and cultivar suggest that further experiments need to be done with a range of cultivars at intermediate locations.     

不同大小整薯播种的产量变异规律及其经济效益——马铃薯整薯播种研究之二

1980～1982年,通过田间试验,对马铃薯不同大小整薯播种的产量变异规律及其经济效益进行了研究。结果表明,生产单位块薯产量所需种薯数量与种薯大小呈极显著的线性关系;马铃薯产量与种薯大小呈渐近状曲线相关;净产量与种薯大小呈抛物线性曲线相关。求得其极大值,3年平均为50.4±3.5克。马铃薯繁殖倍数与种薯大小两者的关系具有双曲线的性质,它在第一象限随种薯大小的增大而递次降低。不同大小种薯所产块茎的商品率3年平均,以111.2克为准时,种薯大小为10,30,50,80和150克,各处理所产块茎商品率依次为88.1,77.6,69.7,62.8和48.7％,以50克为准时,各处理所产块茎商品率依次为99.2,98.4,97.6,96.9和94.0％,都在90％以上。     

Leaf and seed micronutrient accumulation in soybean cultivars in response to integrated organic and chemical fertilizers application

Plant nutrients can be influenced by organic materials of soils. An experiment was conducted to evaluate the effect of organic amendments on elements uptake by soybean cultivars in a silty loam soil in Mazandaran province, Iran. The experiment was carried out in split plot based on randomized complete block design with three replications in 2006. Main plots were included 8 fertilizer treatments consisted of 20 and 40 Mg ha(-1) Municipal Solid Waste Compost (MSW), Vermicompost (VC) and Sewage Sludge (SS) which enriched with 50% chemical fertilizers needed by soil, only chemical fertilizer treatment and control. Sub plots consisted of three genotypes of soybean (032, 033 and JK). Grain yield was determined and soybean leaves and seeds were digested and analyzed for Mn, Cu, Zn and Fe. Results showed that yield and elements content in soybean leaves and seeds (Mn, Cu, Zn and Fe) were influenced by all treatments. The 40 Mg ha(-1) of sewage sludge enriched with chemical fertilizers produced maximum grain yield. Different soybean cultivars had also significant differences in terms of leaf and seed micronutrients accumulation. Maximum grain yield was observed in JK and 033. Mean comparisons showed that interaction effects of fertilizer and cultivar had significant differences on Mn, Cu and Fe content in soybean leaves, so that the maximum Cu content was observed in 032 cultivars with 40 Mg ha(-1) enriched sewage sludge and municipal waste compost. Also the highest amount of Fe was obtained for JK cultivar when the 40 Mg ha(-1) of municipal compost was used. Among different mentioned traits, Fe and Cu content in leaf and seed and Zn content in leaf had a positive and significant correlation with grain yield.     

Soil water stress and the growth and yield of potato plants grown from microtubers and conventional seed tubers

Tuber yields of potato plants grown from microtubers in fields are more variable than yields from conventional seed tubers (CT). One reason could be their higher susceptibility to water stress. This study clarified the effect of soil water stress from 1 month after emergence on the growth and yield of plants grown from conventional seed tubers and microtubers in fields. Microtubers (0.5–3 g) and conventional seed tubers (50 g) were grown in Hokkaido, Japan, over three field seasons. One month after emergence, poly-shelters were placed over the plots to prevent rainfall, and either irrigated (wet plot) or non-irrigated (dry plot) treatments were formed. At mid-flowering (about 50 days after emergence) leaf area index (LAI) in microtuber plants was decreased relatively more due to soil water stress than LAI in conventional seed tuber plants. However, at maximum shoot growth (about 80 days after emergence) both microtuber and conventional seed tuber plants had a similar relative decrease in LAI due to soil water stress. At mid-flowering and maximum shoot growth microtuber and conventional seed tuber plants had reduced stomatal conductance due to soil water stress, but the reduction in stomatal conductance was greater in conventional seed tuber plants than in microtuber plants. Microtuber and conventional seed tuber plants had similar root development at maximum shoot growth. Tuber production from mid-flowering until plant maturity was similarly affected by soil water stress in microtuber and conventional seed tuber plants. At harvest, plants affected by soil water stress had about 87% of the tuber dry weight of irrigated plants. We conclude, that the greater variation on tuber yield of microtuber plants cannot be attributed to soil water stress from 1 month after emergence.     

Continuation of cropping sequence studies on coarse textured soils in southeastern Idaho

A potato cropping rotation study was initiated on coarse textured soils in 1969 to compare annual cropping to potatoes with potato-grain rotations. At the completion of the 1975 season, those treatments annually cropped to potatoes had been planted to potatoes for seven consecutive years. After this period of time, total yields were reduced by 14% or 55 cwt/acre (6 T/ha) when compared to yields from potato-grain rotation treatments. Soil fumigation with 30 gpa (285 1/ha) of soil fumigant (Shell D-D) resulted in no beneficial effects on tuber yield or quality.     

Effect of seed production location on the performance of Russet Burbank clones in southern Australia

In this study, three clones of Russet Burbank were grown at five different seed production sites and one other clone was grown at three of these sites. Seed from these treatments was then evaluated at two commercial production sites, in Victoria and Tasmania. Production site had a significant effect on the subsequent performance. Plant establishment, vigor, maturity, and stem and tuber number per plant were influenced by seed production site. Seed from more southerly locations had increased plant emergence, greater early vigor, earlier maturity, and reduced stem and tuber numbers per plant. Differences between the Tasmanian, Ruen and Victorian Netted Gem clones were small and restricted to the numbers of stems and tubers produced, and some yield components. The Ballarat clone was late maturing and had a high total but low marketable yield due to high levels of oversized and misshapen tubers. However this clone also showed least dark end to the fried crisp. Interactions were detected between clone and seed production site but these have no practical significance.     

Effect of cultivar maturity period on the growth and yield of potato plants grown from microtubers and conventional seed tubers

Potato plants of early cultivars grown from microtubers have been reported to have a much lower growth vigor and produce lower yields than microtubers of late cultivars. This study intended to clarify the field performance of plants grown from directly planted microtubers of cultivars with different maturity periods, with a special attention to early cultivars. The experiments were conducted at Hokkaido University, Japan, over four years. Microtubers and conventional seed tubers of the early cultivar Kitaakari, late cultivars Konafubuki and Norin 1, and very late breeding line IWA-1 were planted, and the plant growth and tuber yields were analyzed. The microtuber plants of Kitaakari had a lower initial increase in leaf area index than conventional seed tuber plants, but at the maximum shoot growth had the same leaf area index. This pattern was also observed in the other cultivars. Tuber initiation and tuber bulking occurred on average five days later in microtuber plants than in conventional seed tuber plants of cultivar Kitaakari. At maximum shoot growth, microtuber plants had on average 65% of tuber dry weight of conventional seed tuber plants, with small variation among cultivars. Irrespective of maturity period, microtuber plants showed a higher tuber increase after maximum shoot growth, achieving around 86% of tuber dry weight of conventional seed tuber plants at harvest. From the results of this study we conclude that microtuber plants of early and late cultivars have a similar yield potential relative to conventional seed tuber plants, and microtubers of both early and late cultivars might be used as an alternative seed tuber source for potato production, if necessary.     

Intercropping cassava with soybean cultivars of varying maturities

Our previous work has shown that early-maturing soybean is suitable for intercropping with vassava at a high latitude (27°S) in south-east Queensland, Australia, as it does not effect the tuber yield. The present study examines whether later-maturing cultivars of soybean with higher yield potential might be more productive. Plant arrangement for cassava was the same in sole crop and in intercrop, while two soybean rows in every six rows were replaced by a row of cassava in intercropping.All soybean cultivars dominated intercropped cassava, and their dry-matter growth and seed yield were not affected by competition with cassava. Growth of cassava was, on the other hand, severely restricted by intercropped soybean, particularly by late-maturing types. After removal of early-maturing soybean, cassava recovered quickly to produce high leaf-area and effectively intercepted solar radiation. Consequential high total dry-matter production, combined with high assimilate allocation to tubers, resulted in tuber yield at the final harvest similar to that in sole cassava. After the removal of late-maturing soybean, however, recovery was poor, and with a short growing season remaining, tuber yields were only 50–60% of that of sole cassava.In addition to their adverse effect on cassave growth, late-maturing cultivars were not suitable as an intercrop because of low harvest indices and low light-conversion efficiency (dry matter produced per unit intercepted radiation), although total light interception during the whole growth of cassava/soybean intercrop was similar to that of sole cassava. The low overall light-conversion efficiency in intercropping with late-maturing cultivars was due to very low dry-matter production of soybean during pod-filling when light interception was still high.