The economics of low pressure drip irrigation and hand watering for vegetable production in the Sahel

Low pressure drip irrigation is being promoted in Sub Saharan Africa as an alternative to traditional methods of small scale irrigation of vegetables. The African Market Garden (AMG) is a horticultural production system for smallholders based on low-pressure drip irrigation combined with an improved crop management package. The agronomic and economic performance of the AMG is compared to two gardens irrigated manually with watering cans. One of these gardens is managed according to the same improved crop management package as in the AMG, this treatment is called Improved Management (IM). The other garden is managed according to common practices of vegetable producers in the area, this treatment is called the Farmer Practice (FP). Crop productivity, labor and water use were monitored for two vegetable species (okra and eggplants). The experiment was performed on-station in Niger on three adjacent 500 m² plots in a sandy acid soil. It was found that improved crop management practices greatly enhance crop productivity over traditional methods at comparable production costs. The AMG gave higher crop yields and higher returns to investment than the treatments irrigated with watering cans. Labor accounts for up to 45% of the production cost in vegetable gardens irrigated by hand, where 80% of the producer time is spent on irrigation. The total labor requirement for the drip irrigated AMG was on average 1.1 man hours per day against 4.7 man hours per day for the Farmers Practice on a 500 m² garden. Returns on labor are at least double for the AMG against the other treatments. The returns on land from eggplant were found to be US$ 1.7, 0.8 and 0.1 per m² for the AMG, IM and FP respectively. The returns on water for the cultivation of eggplant are around US$ 2 per m³ in the AMG, against US$ 0.1 in the Farmers Practice. This experiment showed the strong positive impact of drip irrigation and improved crop management practices on profits at minimal environmental costs, indicating that transformation of existing practices poses a considerable potential towards sustainable agricultural development.     

Development of crop water stress index of wheat crop for scheduling irrigation using infrared thermometry

This study was conducted to develop the relationship between canopy-air temperature difference and vapour pressure deficit for no stress condition of wheat crop (baseline equations), which was used to quantify crop water stress index (CWSI) to schedule irrigation in winter wheat crop (Triticum aestivum L.). The randomized block design (RBD) was used to design the experimental layout with five levels of irrigation treatments based on the percentage depletion of available soil water (ASW) in the root zone. The maximum allowable depletion (MAD) of the available soil water (ASW) of 10, 40 and 60 per cent, fully wetted (no stress) and no irrigation (fully stressed) were maintained in the crop experiments. The lower (non-stressed) and upper (fully stressed) baselines were determined empirically from the canopy and ambient air temperature data obtained using infrared thermometry and vapour pressure deficit (VPD) under fully watered and maximum water stress crop, respectively. The canopy-air temperature difference and VPD resulted linear relationships and the slope (m) and intercept (c) for lower baseline of pre-heading and post-heading stages of wheat crop were found m = −1.7466, c = −1.2646 and m = −1.1141, c = −2.0827, respectively. The CWSI was determined by using the developed empirical equations for three irrigation schedules of different MAD of ASW. The established CWSI values can be used for monitoring plant water status and planning irrigation scheduling for wheat crop.     

Evapotranspiration and water use of full and deficit irrigated cotton in the Mediterranean environment in northern Syria

Cotton (Gossypium hirsutum L.) is the most important industrial and summer cash crop in Syria and many other countries in the arid areas but there are concerns about future production levels, given the high water requirements and the decline in water availability. Most farmers in Syria aim to maximize yield per unit of land regardless of the quantity of water applied. Water losses can be reduced and water productivity (yield per unit of water consumed) improved by applying deficit irrigation, but this requires a better understanding of crop response to various levels of water stress. This paper presents results from a 3-year study (2004-2006) conducted in northern Syria to quantify cotton yield response to different levels of water and fertilizer. The experiment included four irrigation levels and three levels of nitrogen (N) fertilizer under drip irrigation. The overall mean cotton (lint plus seed, or lintseed) yield was 2502 kg ha⁻¹, ranging from 1520 kg ha⁻¹ under 40% irrigation to 3460 kg ha⁻¹ under 100% irrigation. Mean water productivity (WP_ET) was 0.36 kg lintseed per m³ of crop actual evapotranspiration (ET_c), ranging from 0.32 kg m⁻³ under 40% irrigation to 0.39 kg m⁻³ under the 100% treatment. Results suggest that deficit irrigation does not improve biological water productivity of drip-irrigated cotton. Water and fertilizer levels (especially the former) have significant effects on yield, crop growth and WP_ET. Water, but not N level, has a highly significant effect on crop ET_c. The study provides production functions relating cotton yield to ET_c as well as soil water content at planting. These functions are useful for irrigation optimization and for forecasting the impact of water rationing and drought on regional water budgets and agricultural economies. The WP_ET values obtained in this study compare well with those reported from the southwestern USA, Argentina and other developed cotton producing regions. Most importantly, these WP_ET values are double the current values in Syria, suggesting that improved irrigation water and system management can improve WP_ET, and thus enhance conservation and sustainability in this water-scarce region.     

Water and nutrient use efficiency of a low-cost hydroponic greenhouse for a cucumber crop: An Australian case study

The Australian greenhouse industry is primarily dominated by low-cost hydroponic greenhouses for delivery of water and nutrients to plants to grow a variety of vegetable crops including cucumber and tomato. The nutrient rich drainage water from these greenhouses is generally released into the local environment causing pollution concerns. This study was initiated to investigate the opportunities in recycling drainage water to increase water and nutrient-use efficiency of hydroponic greenhouses and reduce the environmental impact of the drainage water discharge. Results indicated that a total of 4.15 ML/ha of irrigation water was applied during the 13 weeks crop growing period of which 2.56 ML/ha was drained off and 1.59 ML/ha was used to meet the crop evapotranspiration demand. The study showed that the recycling of the drainage water resulted in a 33% reduction in potable water used for irrigation in cucumber production. The drainage water contained 59% applied N, 25% applied P and 55% applied K and illustrated the potential for nutrient recovery and production cost savings through the reuse of drainage water. This case study demonstrates that some relatively simple changes in irrigation practices within greenhouse systems to recycle drainage water can considerably improve sustainability of low-cost hydroponic greenhouses and help minimise the environmental footprint of the greenhouse industry.     

Effect of saline water on cucumber (Cucumis sativus L.) yield and water use under drip irrigation in North China

Saline water has been included as an important substitutable resource for fresh water in agricultural irrigation in many fresh water scarce regions. In order to make good use of saline water for agricultural irrigation in North China, a semi-humid area, a 3-year field experiment was carried out to study the possibility of using saline water for supplement irrigation of cucumber. Saline water was applied via mulched drip irrigation. The average electrical conductivity of irrigation water (EC_iw) was 1.1, 2.2, 2.9, 3.5 and 4.2 dS/m in 2003 and 2004, and 1.1, 2.2, 3.5, 4.2 and 4.9 dS/m in 2005. Throughout cucumber-growing season, the soil matric potential at 0.2 m depth immediately under drip emitter was kept higher than −20 kPa and saline water was applied after cucumber seedling stage. The experimental results revealed that cucumber fruit number per plant and yield decreased by 5.7% per unit increase in EC_iw. The maximum yield loss was around 25% for EC_iw of 4.9 dS/m, compared with 1.1 dS/m. Cucumber seasonal accumulative water use decreased linearly over the range of 1.5-6.9% per unit increase in EC_iw. As to the average root zone EC_e (electrical conductivity of saturated paste extract), cucumber yield and water use decreased by 10.8 and 10.3% for each unit of EC_e increase in the root zone (within 40 cm away from emitter and 40 cm depths), respectively. After 3 years irrigation with saline water, there was no obvious tendency for EC_e to increase in the soil profile of 0-90 cm depths. So in North China, or similar semi-humid area, when there is no enough fresh water for irrigation, saline water up to 4.9 dS/m can be used to irrigate field culture cucumbers at the expense of some yield loss.     

Effect of precipitation change on water balance and WUE of the winter wheat-summer maize rotation in the North China Plain

Limited precipitation restricts crop yield in the North China Plain, where high level of production depends largely on irrigation. Establishing the optimal irrigation scheduling according to the crop water requirement (CWR) and precipitation is the key factor to achieve rational water use. Precipitation data collected for about 40 years were employed to analyze the long-term trend, and weather data from 1984 to 2005 were used to estimate the CWR and irrigation water requirements (IWR). Field experiments were performed at the Luancheng Station from 1997 to 2005 to calculate the soil water consumption and water use efficiency (WUE). The results showed the CWR for winter wheat and summer maize were similar and about 430 mm, while the IWR ranged from 247 to 370 mm and 0 to 336 mm at the 25% and 75% precipitation exceedance probabilities for winter wheat and summer maize, respectively. The irrigation applied varied in the different rainfall years and the optimal irrigation amount was about 186, 161 and 99 mm for winter wheat and 134, 88 and 0 mm for summer maize in the dry, normal and wet seasons, respectively. However, as precipitation reduces over time especially during the maize growing periods, development of water-saving management practices for sustainable agriculture into the future is imperative.     

Subsurface drip irrigation of onions: Effects of drip tape emitter spacing on yield and quality

Improved irrigation water use efficiency is an important component of sustainable agricultural production. Efficient water delivery systems such as subsurface drip irrigation (SDI) can contribute immensely towards improving crop water use efficiency and conserving water. However, critical management considerations such as choice of SDI tube, emitter spacing and installation depth are necessary to attain improved irrigation efficiencies and production benefits. In this study, we evaluated the effects of subsurface drip tape emitter spacing (15, 20 and 30 cm) on yield and quality of sweet onions grown at two locations in South Texas—Weslaco and Los Ebanos. Season-long cumulative crop evapotranspiration (ETc) was 513 mm in Weslaco and 407 mm at Los Ebanos. Total crop water input (rain + irrigation) at Weslaco was roughly equal to ETc (92% ETc) whereas at Los Ebanos, water inputs exceeded ETc by about 35%. Onion yields ranged from 58.5 to 70.3 t ha⁻¹ but were not affected by drip tube emitter spacing. Onion pungency (pyruvic acid development) and soluble solids concentration were also not significantly influenced by treatments. Crop water use efficiency was slightly higher at Weslaco (13.7 kg/m³) than at Los Ebanos (11.7 kg/m³) partly because of differences in total water inputs resulting from differences in irrigation management. The absence of any significant effects of drip tape emitter spacing on onion yield may be due to the fact that irrigation was managed to provide roughly similar irrigation amounts and optimum soil moisture conditions in all treatments.     

Modelling the effects of climate variability and water management on crop water productivity and water balance in the North China Plain

In the North China Plain (NCP), while irrigation using groundwater has maintained a high-level crop productivity of the wheat-maize double cropping systems, it has resulted in rapid depletion of groundwater table. For more efficient and sustainable utilization of the limited water resources, improved understanding of how crop productivity and water balance components respond to climate variations and irrigation is essential. This paper investigates such responses using a modelling approach. The farming systems model APSIM (Agricultural Production Systems Simulator) was first calibrated and validated using 3 years of experimental data. The validated model was then applied to simulate crop yield and field water balance of the wheat-maize rotation in the NCP. Simulated dryland crop yield ranged from 0 to 4.5 t ha⁻¹ for wheat and 0 to 5.0 t ha⁻¹ for maize. Increasing irrigation amount led to increased crop yield, but irrigation required to obtain maximum water productivity (WP) was much less than that required to obtain maximum crop yield. To meet crop water demand, a wide range of irrigation water supply would be needed due to the inter-annual climate variations. The range was simulated to be 140-420 mm for wheat, and 0-170 mm for maize. Such levels of irrigation applications could potentially lead to about 1.5 m year⁻¹ decline in groundwater table when other sources of groundwater recharge were not considered. To achieve maximum WP, one, two and three irrigations (i.e., 70, 150 and 200 mm season⁻¹) were recommended for wheat in wet, medium and dry seasons, respectively. For maize, one irrigation and two irrigations (i.e., 60 and 110 mm season⁻¹) were recommended in medium and dry seasons, while no irrigation was needed in wet season.     

Simulation of putting-green soil water dynamics: Implications for turfgrass water use

Results from a field experiment examining soil water fate within U.S. Golf Association (USGA) putting greens were used to examine the validity of a water flow simulation model. The experiment used six different sandy root zones each with depths of 300 mm overlying a 100 mm thick gravel layer. Data collected over two growing seasons consisted of measured rainfall, irrigation, drainage volume, and soil water contents; and calculated turfgrass evapotranspiration (ET). Turfgrass rooting was measured at the end of each growing season, and water retention curve and saturated hydraulic conductivity measurements were conducted at the end of the study. For each root zone treatment, HYDRUS-2D (H2D) was calibrated using a subset of the experimental data and then validated by comparing observed and predicted water contents at 76, 152 and 229 mm depth and over both growing seasons. Model efficiency (E) ranged from 0.33 to 0.78; Mean Absolute Error (MAE) ranged from 0.012 to 0.024 m³ m⁻³; and Root Mean Square Error (RMSE) ranged from 0.015 to 0.028 m³ m⁻³, for the six treatments and both years. Also, RMSE values were at best slightly larger than and at worst twice as large as the mean standard deviation values of replicate measurements. Thus, H2D simulation performed reasonably well in describing the water content results of the field study. The calibration results provide evidence of hysteresis in water retention where water retention properties from the field appear to follow the sorption or wetting curve as compared with the laboratory measurements following the desorption or drying curve. This suggests that standard laboratory measurements of water release would not precisely predict water retention behavior in the field and over estimate water storage of these capillary barrier soils. The validation results provide evidence for turfgrass use of perched water held within these profiles, even though turfgrass rooting is shallow and water storage principally occurs deep within the root zone. Thus, the perched water of USGA putting greens should serve reasonably well as a water reservoir for subsequent turfgrass use, allowing for water conserving irrigation practices that makes use of this stored water.     

Modelling the fate of water and nitrogen in the mixed vegetable farming systems of northern Tasmania, Australia

A combination of high input management systems, high annual rainfall and deep, permeable soils in northern Tasmania create conditions that are conducive to high drainage and nitrogen losses below the root zone. An understanding of the extent and mechanism of such losses will enable farm managers and their consultants to identify and implement more sustainable management practices that minimise potential adverse financial and environmental consequences. Analysing the fate of water and nutrients in farming systems is complex and influenced by a wide range of factors including management, soil characteristics, seasonal climate variability and management history of the paddock/farm in question. This paper describes a novel farm system modelling approach based on the model APSIM, for analysing the fate of nitrogen and water in mixed vegetable-based farming enterprises. The study was based on seven case farms across the Panatana catchment in northern Tasmania. Substantial simulated drainage losses (>100 mm average seasonal loss) were apparent for all crop and rotation elements across all farms in response to the surplus between crop water supply and crop water use. Crop nitrogen demand was found to be close to crop nitrogen supply for all crop and pasture rotation elements with the exception of potato, which had an average surplus nitrogen supply of 89 kg N/ha. This resulted in potato having much higher nitrate nitrogen leaching losses (32 kg N/ha) compared to other crops (<10 kg N/ha). Simulations suggest that practicable management options such as deficit-based irrigation and reduced N fertiliser rates will maintain current levels of productivity while reducing potential offsite N loss and generating significant financial savings via reduced input costs.     

Soil water storage and drainage under cotton-based cropping systems in a furrow-irrigated Vertisol

Comparative studies of drainage and leaching under tillage systems in irrigated tropical and sub-tropical Vertisols are sparse. The objective of this study was to quantify drainage under cotton-based cropping systems sown on permanent beds in an irrigated Vertisol. Drainage and soil water storage were measured with the chloride mass balance method and neutron moisture meter, respectively, during the 2002-03, 2004-05, 2006-07 and 2008-09 cotton seasons in an on-going experiment in a Vertisol in NW NSW. The experimental treatments were: cotton monoculture sown either after conventional tillage or on permanent beds, and a cotton-wheat rotation on permanent beds where the wheat stubble was retained as in situ mulch into which the following cotton crop was sown. Subject to in-crop rainfall, irrigation frequency varied between 7 and 14 days for cotton and 2-3 months for wheat. In 2005, a split-plot design was superimposed on the existing experiment such that the main-plot treatments were irrigation frequency (“frequent”, 7-14-day irrigation interval; “infrequent”, 14-21-day irrigation interval), and sub-plot treatments were the historical tillage system/crop rotation combinations. In comparison with cotton monoculture sown either after conventional tillage or on permanent beds, soil water storage, particularly during the early part of growing season when rainfall provided the major proportion of crop water requirements, and drainage were greatest when a cotton-wheat rotation was sown on permanent beds. Seasonal drainage out of the 1.2 m depth, averaged among all seasons, was of the order of 25 mm, 33 mm and 70 mm with cotton monoculture sown either after conventional tillage or on permanent beds, and a cotton-wheat rotation on permanent beds, respectively. Soil water storage and drainage were also greater when irrigation frequency was greater. Seasonal drainage out of the 1.2 m depth, averaged between the 2006-07 and 2008-09 seasons, was 54 mm with “frequent irrigation”, and 28 mm with “infrequent” irrigation. Infiltration was less in management systems which resulted in wetter soil; viz. frequent irrigation or a cotton-wheat rotation on permanent beds with in situ stubble retention. Drainage water losses in a furrow-irrigated Vertisol may be reduced and soil water storage increased (i.e. water conservation improved) by sowing a cotton-wheat rotation with in situ stubble retention under less frequent irrigation.     

Drip irrigation of tea (Camellia sinensis L.): 1. Yield and crop water productivity responses to irrigation

The effects of drip irrigation on the yield and crop water productivity responses of four tea (Camellia sinensis (L.) O. Kuntze) clones were studied four consecutive years (2003/2004-2006/2007), in a large (9 ha) field experiment comprising of six drip irrigation treatments (labelled: I₁-I₆) and four clones (TRFCA PC81, AHP S15/10, BBK35 and BBT207) planted at a spacing of 1.20 m × 0.60 m at Kibena Tea Limited (KTL), Njombe in the Southern Tanzania in a situation of limited water availability. Each clone × drip irrigation treatment combination was replicated six times in a completely randomized design with 144 net plots each with an area of 72 m². Clone TRFCA PC81 gave the highest yields (range: 5920-6850 kg dried tea ha⁻¹) followed by clones BBT207 (5010-5940 kg dried tea ha⁻¹), AHP S15/10 (4230-5450 kg dried tea ha⁻¹) and BBK35 (3410-4390 kg dried tea ha⁻¹) and drip irrigation treatment I₂ gave the highest yields, ranging from 4954 to 6072 kg dried tea ha⁻¹) compared with those from other treatments (4113-5868 kg dried tea ha⁻¹). Most of these yields exceeded those (4200 kg dried tea ha⁻¹) obtained from overhead sprinkler irrigation system in Mufindi also Southern Tanzania, and Kibena Estate itself. Results showed that drip irrigation of tea not only increased yields but also gave water saving benefits of up to 50% from application of 50% less water to remove the cumulative soil water deficit (treatment I₂), and with labour saving of 85% for irrigation. The yield of dried tea per mm depth of water applied, i.e., “the crop water productivity” for drip irrigation of clones TRFCA PC81, BBT207 and BBK35, in 2003/2004 for instance, were 9.3, 8.5 and 7.1 kg dried tea [ha mm]⁻¹, respectively. The corresponding values in 2004/2005 were 2.7, 4.5 and 2.0 kg dried tea [ha mm]⁻¹ while the yield responses from clone AHP S15/10 were linear decreasing by 1 and 1.6 kg dried tea [ha mm]⁻¹ in 2003/2004 and 2004/2005, respectively. In 2005/2006 the crop water productivity from clones TRFCA PC81, AHP S15/10, BBK35 and BBT207 were 4.5, 0.4, 5.2 and 6.9 kg dried tea [ha mm]⁻¹, respectively with quadratic yield response functions to drip irrigation depth of water application. The results are presented and recommendations and implications made for technology-transfer scaling-up for increased use by large and smallholder tea growers.     

Effects of rainfall harvesting and mulching technologies on water use efficiency and crop yield in the semi-arid Loess Plateau, China

In semi-arid areas, crop growth is greatly limited by water. Amount of available water in soil can be increased by surface mulching and other soil management practices. Field experiments were conducted in 2005 and 2006 at Gaolan, Gansu, China, to determine the influence of ridge and furrow rainfall harvesting system (RFRHS), surface mulching and supplementary irrigation (SI) in various combinations on rainwater harvesting, amount of moisture in soil, water use efficiency (WUE), biomass yield of sweet sorghum (Sorghum bicolour L.) and seed yield of maize (Zea mays L.). In conventional fields without RFRHS, gravel-sand mulching produced higher biomass yield than plastic-mulching or straw-mulching. In plastic-mulched fields, an increasing amount of supplemental irrigation was needed to improve crop yield. There was no effect of RFRHS without plastic-covered ridge on rainwater harvesting when natural precipitation was less than 5 mm per event. This was due to little runoff of rainwater from frequent low precipitation showers, and most of the harvested rainwater gathered at the soil surface is lost to evaporation. In the RFRHS, crop yield and WUE were higher with plastic-covered ridges than bare ridges, and also higher with gravel-sand-mulched furrows than bare furrows in most cases, or straw-mulched furrows in some cases. This was most likely due to decreased evaporation with plastic or gravel-sand mulch. In the RFRHS with plastic-covered ridges and gravel-sand-mulched furrows, application of 30 mm supplemental irrigation produced the highest yield and WUE for sweet sorghum and maize in most cases. In conclusion, the findings suggested the integrated use of RFRHS, mulching and supplementary irrigation to improve rainwater availability for high sustainable crop yield. However, the high additional costs of supplemental irrigation and construction of RFRHS for rainwater harvesting need to be considered before using these practices on a commercial scale.     

An approach for precision farming under pivot irrigation system using remote sensing and GIS techniques

The current work is aimed to realizing land and water use efficiency and determining the profitability of precision farming economically and environmentally. The studied area is represented by an experimental pivot irrigation field cultivated with maize in Ismailia province, Egypt. Two field practices were carried out during the successive summer growing seasons (2008 and 2009) to study the response of maize plants single hybrid 10 (S.H.10) to traditional and precision farming practices. Traditional farming (TF) as handled by the farm workers were observed and noted carefully. On the other hand precision farming (PF) practices included field scouting, grid soil sampling, variable rate technology and its applications. After applying PF a dramatic change in management zones was noticed and three management zones (of total four) were merged to be more homogenous representing 84.3% of the pivot irrigation field.Under PF Remote Sensing and Geographic Information System techniques have played a vital role in the variable rate applications that were defined due to management zones requirements. Fertilizers were added in variable rates, so that rationalization of fertilizers saved 23.566 tonnes/experimental pivot area. Natural drainage system was improved by designing vertical holes to break down massive soil layers and to leach excessive salts. Crop water requirements were determined in variable rate according to the actual plant requirements using SEBAL model with the aid of FAO Cropwat model. Irrigation schedule of maize was adopted considering soil water retention, depletion, gross and net irrigation saving an amount of water equal to 93,718 m³ in the pivot irrigation field (153.79 acre). However costs of applying PF were much higher than TF, the economic profitability (returns-costs) achieved remarkable increase of 29.89% as a result of crop yield increment by 1000, 2100, 800 and 200 kg/acre in the management zones 1, 2, 3 and 4, respectively. Finally applying adequate amounts of fertilizers beside water control the environmental hazards was reduced to the acceptable limits.     

Effects of applied water and sprinkler irrigation uniformity on alfalfa growth and hay yield

This study was conducted to investigate the effects of applied water and sprinkler irrigation uniformity on alfalfa (Medicago sativa L.) growth and hay yield in a semi-arid region. Field experiments were carried out in 2006 in Varamin, Iran, on three plots of 25 m × 30 m. Each plot was subdivided into 25 subplots of 5 m × 6 m. Different irrigation depths and sprinkler water uniformities were obtained by various scenarios of sprinkler nozzle pressure. In each plot, applied water was measured at 250 points (125 points above and 125 points below canopy) and the soil water content of 40 cm deep below soil surface was monitored at 25 points, each in the center of a subplot, throughout the irrigation season. The results showed that sprinkler water and soil water content uniformity varied between 66-78 and 88-91%, respectively. The findings revealed that soil water content uniformity was around 20% higher than sprinkler water uniformity. The irrigation uniformity below the canopy was estimated to be 2.5% greater than above the canopy, and canopy-intercepted water could account for 11-15% of the total seasonal applied water. Evaluation showed that alfalfa leaf area index relies more heavily on farm water application uniformity than hay yield and crop height. The experimental results illustrated that water distribution in sprinkler irrigation systems has a direct effect on alfalfa growth, hay yield and water productivity such that the applied water reduction and the increased sprinkler water uniformity led to an increased alfalfa water productivity of 2.41 kg m⁻³.     

Deficit irrigation in maize for reducing agricultural water use in a Mediterranean environment

Research on crop response to deficit irrigation is important to reduce agricultural water use in areas where water is a limited resource. Two field experiments were conducted on a loam soil in northeast Spain to characterize the response of maize (Zea mays L.) to deficit irrigation under surface irrigation. The growing season was divided into three phases: vegetative, flowering and grain filling. The irrigation treatments consisted of all possible combinations of full irrigation or limited irrigation in the three phases. Limited irrigation was applied by increasing the interval between irrigations. Soil water status, crop growth, above-ground biomass, yield and its components were measured. Results showed that flowering was the most sensitive stage to water deficit, with reductions in biomass, yield and harvest index. Average grain yield of treatments with deficit irrigation around flowering (691 g m⁻²) was significantly lower than that of the well-irrigated treatments (1069 g m⁽²). Yield reduction was mainly due to a lower number of grains per square metre. Deficit irrigation or higher interval between irrigations during the grain filling phase did not significantly affect crop growth and yield. It was possible to maintain relatively high yields in maize if small water deficits caused by increasing the interval between irrigations were limited to periods other than the flowering stage. Irrigation water use efficiency (IWUE) was higher in treatments fully irrigated around flowering.     

Using EPIC model to manage irrigated cotton and maize

Simulation models are becoming of interest as a decision support system for management and assessment of crop water use and of crop production. The Environmental Policy Integrated Climate (EPIC) model was used to evaluate its application as a decision support tool for irrigation management of cotton and maize under South Texas conditions. Simulation of the model was performed to determine crop yield, crop water use, and the relationships between the yield and crop water use parameters such as crop evapotranspiration (ETc) and water use efficiency (WUE). We measured actual ETc using a weighing lysimeter and crop yields by field sampling, and then calibrated the model. The measured variables were compared with simulated variables using EPIC. Simulated ETc agreed with the lysimeter, in general, but some simulated ETc were biased compared with measured ETc. EPIC also simulated the variability in crop yields at different irrigation regimes. Furthermore, EPIC was used to simulate yield responses at various irrigation regimes with farm fields’ data. Maize required ∼700 mm of water input and ∼650 mm of ETc to achieve a maximum yield of 8.5 Mg ha⁻¹ while cotton required between 700 and 900 mm of water input and between 650 and 750 mm of ETc to achieve a maximum yield of 2.0-2.5 Mg ha⁻¹. The simulation results demonstrate that the EPIC model can be used as a decision support tool for the crops under full and deficit irrigation conditions in South Texas. EPIC appears to be effective in making long-term and pre-season decisions for irrigation management of crops, while reference ET and phenologically based crop coefficients can be used for in-season irrigation management.     

Rice growth, yield and water productivity responses to irrigation scheduling prior to the delayed application of continuous flooding in south-east Australia

The majority of rice grown in south-east Australia is continuously flooded for much of its growing season, but reduced irrigation water availability brought about by a combination of drought and environmental flow legislation has presented a need to maintain (or even increase) rice production with less irrigation water. Delaying the application of continuous flooding until prior to panicle initiation can increase input water productivity by reducing non-beneficial evaporation losses from free water and the soil. A field experiment was conducted over two growing seasons, 2008/9 and 2009/10, comparing a conventional dry seeded treatment (the control - continuous flooding from the 3 leaf stage) with delayed continuous flooding (10-20 days prior to panicle initiation) with several irrigation scheduling treatments prior to flooding commencement. In the first year, the delayed water treatments were irrigated at intervals of 40, 80 and 160 mm of cumulative reference evapotranspiration (ETo) prior to delayed continuous flooding, thereby imposing differing degrees of crop water stress. In year 2, the 80 and 160 mm treatments were modified by use of a crop factor (Kc) when the plants were small and the 40 mm treatment was replaced with a continuously flooded treatment throughout the crop duration.Decreases in net water input (irrigation + rain − surface drainage) and increases in input water productivity were achieved by reducing the flush irrigation frequency during the pre-flood period. Savings of 150 and 230 mm (10 and 15%) were achieved in Year 1 from the 80 and 160 mm cumulative ETo irrigation frequency treatments, respectively, in comparison to the control. In the second year, net water input savings of 230 and 330 mm (15 and 22%) were achieved with the 80/Kc and 160/Kc mm treatments, respectively. Input water productivity of the 160 mm treatment was 0.06 kg/m³ (8%) higher than the control in Year 1, while in Year 2 a 0.15 kg/m³ (17%) increase in input water productivity above the control was achieved by the 160/Kc mm treatment. Delaying the application of continuous flooding in the second year greatly extended the period of crop growth suggesting the need for earlier sowing (by 7-10 days) to ensure pollen microspore still occurs at the best time to minimise yield loss due to cold damage. Nitrogen fertiliser management is an important issue when delaying continuous flooding, and nitrogen losses appeared to increase with the frequency of irrigation prior to continuous flooding. This was likely due to increased denitrification from alternate wetting and drying of the soil. Further research is required to determine the most appropriate nitrogen management strategies, and to also better define the optimal pre-flood irrigation frequency.     

Assessing yield optimization and water reduction potential for summer-sown and spring-sown maize in Pakistan

Agricultural food production in arid and semi-arid regions faces the challenge to ensure high yields with limited supply of water. This raises the question to which extent irrigation supply can be reduced without detriment to yield. Our study focuses on the yield-water uptake relationship for maize in the moderate water stress range in order to determine the onset of stress-induced dry-matter and yield losses. Compensatory plant responses under moderate stress levels are discussed in relation to seasonal climatic conditions.Summer-sown and spring-sown maize were irrigated with a decreasing amount of water in a field experiment in Pakistan. Water supply ranged from 100% water required to maintain soil at field capacity (FC) to 40% of FC. The average dry-matter and yield levels were slightly higher for summer-sown (15.0 Mg ha⁻¹) compared to spring-sown maize (13.1 Mg ha⁻¹). The onset of significant dry-matter and yield reduction started at the least irrigation treatment in both seasons. The amount of water required to avoid production losses was 272 mm in the summer-sown maize during the autumn growing season, and 407 mm for the spring-sown maize in the summer season, when the evaporative demand of the atmosphere was +27% higher. Water use efficiency (WUE_ET), normalized by vapour pressure deficit, of the summer-sown maize which was 10.0 kg kPa m⁻³, was +15% higher compared to the spring-sown crop; while the irrigation water productivity (2.9 kg m⁻³) was +11% more. WUE_ET increased over the whole range of applied water deficits for summer-sown maize, while the spring-sown crop showed a decreasing WUE_ET in the less irrigated treatment. Due to the higher efficiency in summer-sown maize, the potential in irrigation reduction without production losses (129 mm) was higher compared to the spring-sown maize (57 mm). Our results showed that in Pakistan water saving irrigation practices can be applied without yield loss mainly during the cooler growing season when the crop can efficiently compensate a lower total water uptake by increased use efficiency. For spring-sown maize the increasing evaporative demand of the atmosphere towards summer implies a higher risk of yield losses and narrows the range to exploit higher irrigation water productivity under moderate water deficit conditions.     

Integrated effect of transplanting date, cultivar and irrigation on yield, water saving and water productivity of rice (Oryza sativa L.) in Indian Punjab: Field and simulation study

Individual effect of different field scale management interventions for water saving in rice viz. changing date of transplanting, cultivar and irrigation schedule on yield, water saving and water productivity is well documented in the literature. However, little is known about their integrated effect. To study that, field experimentation and modeling approach was used. Field experiments were conducted for 2 years (2006 and 2007) at Punjab Agricultural University Farm, Ludhiana on a deep alluvial loamy sand Typic Ustipsamment soils developed under hyper-thermic regime. Treatments included three dates of transplanting (25 May, 10 June and 25 June), two cultivars (PR 118 inbred and RH 257 hybrid) and two irrigation schedules (2-days drainage period and at soil water suction of 16 kPa). The model used was CropSyst, which has already been calibrated for growth (periodic biomass and LAI) of rice and soil water content in two independent experiments. The main findings of the field and simulation studies conducted are compared to any individual, integrated management of transplanting date, cultivar and irrigation, sustained yield (6.3-7.5 t ha⁻¹) and saved substantial amount of water in rice. For example, with two management interventions, i.e. shifting of transplanting date to lower evaporative demand (from 5 May to 25 June) concomitant with growing of short duration hybrid variety (90 days from transplanting to harvest), the total real water saving (wet saving) through reduction in evapotranspiration (ET) was 140 mm, which was almost double than managing the single, i.e. 66 mm by shifting transplanting or 71 mm by growing short duration hybrid variety. Shifting the transplanting date saved water through reduction in soil water evaporation component while growing of short duration variety through reduction in both evaporation and transpiration components of water balance. Managing irrigation water schedule based on soil water suction of 16 kPa at 15-20 cm soil depth, compared to 2-day drainage, did not save water in real (wet saving), however, it resulted into apparent water saving (dry saving). The real crop water productivity (marketable yield/ET) was more by 17% in 25th June transplanted rice than 25th May, 23% in short duration variety than long and 2% in irrigation treatment of 16 kPa soil water suction than 2-days drainage. The corresponding values for the apparent crop water productivity (marketable yield/irrigation water applied) were 16, 20 and 50%, respectively. Pooled experimental data of 2 years showed that with managing irrigation scheduling based on soil water suction of 16 kPa at 15-20 cm soil depth, though 700 mm irrigation water was saved but the associated yield was reduced by 277 kg ha⁻¹.