Effects of Wheat Starch Granule Size Distribution on Qualities of Chinese Steamed Bread and Raw White Noodles

Starch is a crucial component determining the processing quality of wheat‐based products such as Chinese steamed bread (CSB) and raw white noodles (RWN). Flour from wheat cultivar Zhongmai 175 was used for fractionation into starch, gluten, and water solubles by hand washing. The starch fraction was successfully separated into large (>10 μm diameter) and small starch granules (<10 μm diameter) by repeated sedimentation. Flour fractions were reconstituted to original levels in the flour by using constant gluten and water solubles and varying the weight ratio of large and small starch granules. As the proportion of small granules increased in the reconstituted flours, farinograph water absorption increased, and amylose content, pasting peak viscosity, trough, and final viscosity decreased. Starch granule size distribution significantly affected processing quality of CSB and RWN. Superior crumb structure score (12.0) was observed in CSB made from reconstituted flour with 35% small starch granules. CSB made from reconstituted flours with 30 and 35% small starch granules exhibited the highest total scores, with values of 85.4 and 83.3, respectively. Significant improvements in color, viscoelasticity, and smoothness of RWN were obtained with an increase in small starch granule content, and reconstituted flours with 30–40% small starch granules produced RWN with moderate firmness.     

Effects of Added Minerals on Pasting of Partial Waxy Wheat Flour and Starch and on Noodle Making Properties

Mineral content, as determined and expressed by ash content, serves as an index of wheat flour quality for flour millers and food manufacturers who prefer flour of low mineral content, even though the significance of mineral content on the functional properties of wheat flour is not well understood. We explored whether minerals have any influence on the functional properties of wheat flour and product quality of white salted noodles. Ash, obtained by incinerating wheat bran, was incorporated into two hard white spring wheat flours and their starches to raise the total ash content to 1, 1.5, or 2%. Pasting properties were determined using a rapid visco analyzer (RVA). Addition of ash increased the peak viscosity of the flours in both water and buffer solution but did not affect the peak viscosity of starch. Wheat flours with added ash showed lower pasting temperature by approximately 10°C in buffer solution. Mineral extracts (15.3% ash) isolated from wheat bran, when added to increase the ash content of wheat flour and starch to 2%, increased the peak viscosity and lowered the pasting temperature of flour by 13.2–16.3% but did not affect the pasting properties of the isolated starch. The mineral premix also increased peak viscosity of wheat flour but not in starch. Added ash increased noodle thickness and lowered water retention of cooked noodles while it exhibited no significant effect on cooked noodle texture as determined using a texture analyzer.     

Impact of Waxy,Partial Waxy,and Wildtype Wheat Starch Fraction Properties on Hearth Bread Characteristics

Thirteen different wheat cultivars were selected to represent GBSS mutations: three each of wildtype, axnull, and bxnull, and two each of 2xnull and waxy. Starch and A‐ and B‐granules were purified from wheat flour. Hearth bread loaves were produced from the flours using a small‐scale baking method. A‐granules purified from wildtype and partial waxy (axnull, bxnull, and 2xnull) starches have significantly higher gelatinization enthalpy and peak viscosity compared with B‐granules. A‐ and B‐granules from waxy starch do not differ in gelatinization, pasting, and gelation properties. A‐ and B‐granules from waxy starch have the highest enthalpy, peak temperature, peak viscosity, breakdown, and lowest pasting peak time and pasting temperature compared with A‐ and B‐granules from partial waxy and wildtype starch. Waxy wheat flour has much higher water absorption compared with partial waxy and wildtype flour. No significant difference in hearth bread baking performance was observed between wildype and partial waxy wheat flour. Waxy wheat flour produced hearth bread with significantly lower form ratio, weight, a more open pore structure, and a bad overall appearance. Baking with waxy, partial waxy, and wildtype wheat flour had no significant effect on loaf volume.     

Starch Properties and Stability of Club and Soft White Winter Wheats from the Pacific Northwest of the United States

Based on examination of 192 club and soft white winter (SWW) wheat samples, club and SWW wheat flours showed comparable levels of starch damage and flour peak viscosity, while differing significantly in starch content. Varietal differences and growing conditions had strong influence on the characteristics of both classes of wheat flour. Club wheat flour exhibited better stability in starch content and starch damage than did SWW wheat flour. A significant correlation between starch damage and cookie diameter in both club and SWW wheat was observed (r = -0.480, P < 0.0001 for club wheat and r = -0.430, P < 0.0001 for SWW wheat). Sponge cake volume was positively correlated with starch content in both classes of wheat (r = 0.362, P < 0.01 for club wheat and r = 0.181, P < 0.05 for SWW wheat). When wheat samples were grown in one location over three years, club and SWW wheat flours had comparable starch content. However, flour and prime starch peak viscosities were significantly different in club than in SWW wheat. Club wheat flour had lower starch damage and amylose content, as measured by high-performance size-exclusion chromatography (HPSEC), than did SWW wheat flour. Crop year and varietal differences had significant effect on amylose content, starch damage, and flour and starch peak viscosities, but not on starch content, in both classes of wheat flour. When wheat samples were grown in one year over seven locations, club wheat flour was higher in starch content, lower in starch damage, and comparable in amylose to SWW wheat flour. Both flour and prime starch viscosities were significantly higher in club wheat than in SWW wheat. Varietal differences and growing location had strong influence on starch properties in both classes of wheat. Peak viscosity of the isolated starch did not correlate well with the corresponding flour, indicating that flour pasting property does not reflect the pasting property of starch. The fine structure of isoamylase-debranched amylopectins from club and SWW wheats had a similar tri-modal pattern, with maximum at ≈DP 15 and two valleys at ≈DP 20 and 45, respectively. Although wheat flour samples differed widely in their prime starch peak viscosity, no significant difference between debranching patterns was obtained. These results indicate that the fine structure of amylopectin might not be responsible for the large differences in prime starch pasting property.     

Impact of Rice Flour Cold‐Water‐Soluble Fraction Removal on Gelatinization and Pasting Properties

The influence of the cold‐water‐soluble fraction on gelatinization and pasting properties of rice flour was investigated. The cold‐water‐soluble fraction was removed by water extraction under room temperature. The gelatinization properties of untreated and treated flour were analyzed with a differential scanning calorimeter, and pasting profiles were measured with a rapid viscosity analyzer. The removal of the cold‐water‐soluble fraction resulted in the formation of a loosened starch granule structure, a morphological alteration of protein bodies, a markedly lower gelatinization temperature, and a significantly higher pasting enthalpy. The impact on paste viscosity followed different trends. In some cultivars that had lower endogenous amylase activity, the paste viscosity was greatly reduced by the removal of the cold‐water‐soluble fraction. In others, the higher level of endogenous amylase activity led to more soluble saccharides being released through starch hydrolysis. Removing the soluble fraction caused a remarkable increase in peak viscosity. The overall effect on paste viscosity of removing the cold‐water‐soluble fraction was attributed to multiple factors, involving loosening of the starch granule structure, alteration of morphology of protein bodies, and the release of saccharides by endogenous amylase activity.     

Effect of Alkaline‐Soluble Proteins on Pasting Properties of Nonwaxy Rice Flour

The pasting properties of rice flours and reconstituted rice flours from mixing a common starch with proteins extracted from different rice cultivars at different total protein content levels were studied. Results showed that not only the total protein content but also the protein composition had an effect on the pasting properties of the rice flours. Among the different strands of rice proteins, globulin had the strongest influence on the pasting properties, followed by glutelin, whereas prolamin had the least influence. At the subunit level of the proteins, proteins with a molecular weight of 17,000, most likely from globulin, had the strongest effect on the peak viscosity of the rice flour, followed by those of 33,000. In comparison with that of the rice starch, the influence of proteins in rice was limited. The effect of interactions between the rice proteins and the starch, such as the role of starch‐granule‐associated proteins, was not isolated in this study, and further investigation is required to quantify this effect.     

Sources of Variation for Starch Gelatinization,Pasting, and Gelation Properties in Wheat

The starch of wheat (Triticum aestivum L.) flour affects food product quality due to the temperature-dependent interactions of starch with water during gelatinization, pasting, and gelation. The objective of this study was to determine the fundamental basis of variation in gelatinization, pasting, and gelation of prime starch derived from seven different wheat cultivars: Kanto 107, which is a partial waxy mutant line, and six near-isogenic lines (NILs) differing in hardness. Complete pasting curves with extended 16-min hold at 93°C were obtained using the Rapid Visco Analyser (RVA). Apparent amylose content ranged from 17.5 to 23.5%; total amylose content ranged from 22.8 to 28.2%. Starches exhibited significant variation in onset of gelatinization. However, none of the parameters measured consistently correlated with onset or other RVA curve parameters that preceded peak paste viscosity. Peak paste viscosity varied from 190 to 323 RVA units (RVU). Higher peak, greater breakdown, lower final viscosity, negative setback, and less total setback were associated with lower apparent and total amylose contents. Each 1% reduction in apparent or total amylose content corresponded to an increase in peak viscosity of about 22 and 25 RVU, respectively, at 12% starch concentration. Of the seven U.S. cultivars, the lower amylose cultivars Penawawa and Klasic were missing the granule-bound starch synthase (GBSS; ADPglucose starch glycosyl transferase, EC 2.4.4.21) protein associated with the Waxy gene locus on chromosome 4A (Wx-B1 locus). Kanto 107 was confirmed as missing both the 7A and 4A waxy proteins (Wx-A1 and Wx-B1 loci). The hardness NIL also were shown to be null at the 4A locus. Apparent and total amylose contents of prime starch generally corresponded well to the number of GBSS proteins; although the hardness NIL tended to have somewhat higher amylose contents than did the other GBSS 4A nulls. We concluded that reduced quantity of starch amylose due to decreased GBSS profoundly affects starch gelatinization, pasting, and gelation properties.     

Effects of Starch Amylose Content of Wheat on Textural Properties of White Salted Noodles

White salted noodles were prepared through reconstitution of fractionated flour components with blends of waxy and regular wheat starches to determine the effects of amylose content on textural properties of white salted noodles without interference of protein variation. As the proportion of waxy wheat starch increased from 0 to 52% in starch blends, there were increases in peak viscosity from 210 to 640 BU and decreases in peak temperature from 95.5 to 70.0°C. Water retention capacity of waxy wheat starches (80–81%) was much higher than that of regular wheat starch (55–62%). As the waxy wheat starch ratio increased in the starch blends, there were consistent decreases in hardness of cooked noodles prepared from reconstituted flours, no changes in springiness and increases in cohesiveness. White salted noodles produced from blends of regular and waxy wheat flours became softer as the proportion of waxy wheat flour increased, even when protein content of flour blends increased. Amylose content of starch correlated positively with hardness and negatively with cohesiveness of cooked white salted noodles. Protein content of flour blends correlated negatively with hardness of cooked noodles, which were prepared from blends of regular (10.5% protein) and waxy wheat flours (> 16.4% protein).     

Factors Governing Pasting Properties of Waxy Wheat Flours

Waxy wheat (Triticum aestivum L.) contains endosperm starch lacking in amylose. To realize the full potential of waxy wheat, the pasting properties of hard waxy wheat flours as well as factors governing the pasting properties were investigated and compared with normal and partial waxy wheat flours. Starches isolated from six hard waxy wheat flours had similar pasting properties, yet their corresponding flours had very different pasting properties. The differences in pasting properties were narrowed after endogenous α‐amylase activity in waxy wheat flours was inhibited by silver nitrate. Upon treatment with protease, the extent of protein digestibility influenced the viscosity profile in waxy wheat flours. Waxy wheat starch granules swelled extensively when heated in water and exhibited a high peak viscosity, but they fragmented at high temperatures, resulting in more rapid breakdown in viscosity. The extensively swelled and fragmented waxy wheat starch granules were more susceptible to α‐amylase degradation than normal wheat starch. A combination of endogenous α‐amylase activity and protein matrix contributed to a large variation in pasting properties of waxy wheat flours.     

不同品种小麦粉的粉质特性对速冻熟制面条品质的影响

为研究不同品种小麦粉与速冻熟制面条质构特性之间的关系,选取30种小麦制粉,用FOSS定氮仪、快速黏度仪、粉质仪和拉伸仪等测定面粉品质指标,制作速冻熟制面条,用质构仪测定质构特性。采用描述性统计、主成分和聚类分析方法对30种小麦面粉和速冻熟制面条的质构关系进行了分析。结果表明:不同品种小麦粉的湿面筋、糊化温度、弱化度、粉质质量指数与硬度呈极显著相关(P0.01);蛋白质、湿面筋、总淀粉含量、最终黏度、回生值、糊化温度、粉质吸水率、粉质曲线稳定时间、面团形成时间、弱化度、粉质质量指数、拉伸曲线面积、拉伸阻力、最大拉伸阻力与剪切力呈极显著相关(P0.01);小麦粉的粉质特性,除衰减值、峰值时间和延伸度外,均与拉伸力呈极显著相关(P0.01)。根据方差贡献率提取出可以反映原变量84.023%信息的5个因子,因子1主要反映面粉的粉质拉伸特性,因子2反映小麦粉糊化特性,因子3反映蛋白质特性,因子4和因子5共同反映小麦粉的淀粉特性。这些性状在小麦粉的评价方面起着重要作用,在加工中要注重对它们的选择。聚类分析将30种小麦粉分为4类,结果表明,不能仅凭小麦粉的指标数据和质构数据来选择制作速冻熟制面条的原料,还需考虑到感官评价的影响。该结论可为小麦粉在速冻熟制面条加工应用方面提供一定的理论参考。     

Structural and molecular basis of starch viscosity in hexaploid wheat

Wheat starch is considered to have a low paste viscosity relative to other starches. Consequently, wheat starch is not preferred for many applications as compared to other high paste viscosity starches. Increasing the viscosity of wheat starch is expected to increase the functionality of a range of wheat flour-based products in which the texture is an important aspect of consumer acceptance (e.g., pasta, and instant and yellow alkaline noodles). To understand the molecular basis of starch viscosity, we have undertaken a comprehensive structural and rheological analysis of starches from a genetically diverse set of wheat genotypes, which revealed significant variation in starch traits including starch granule protein content, starch-associated lipid content and composition, phosphate content, and the structures of the amylose and amylopectin fractions. Statistical analysis highlighted the association between amylopectin chains of 18-25 glucose residues and starch pasting properties. Principal component analysis also identified an association between monoesterified phosphate and starch pasting properties in wheat despite the low starch-phosphate level in wheat as compared to tuber starches. We also found a strong negative correlation between the phosphate ester content and the starch content in flour. Previously observed associations between internal starch granule fatty acids and the swelling peak time and pasting temperature have been confirmed. This study has highlighted a range of parameters associated with increased starch viscosity that could be used in prebreeding/breeding programs to modify wheat starch pasting properties.     

Significance of Starch Properties and Quantity on Sponge Cake Volume

We evaluated the qualitative and quantitative effects of wheat starch on sponge cake (SC) baking quality. Twenty wheat flours, including soft white and club wheat of normal, partial waxy, and waxy endosperm, as well as hard wheat, were tested for amylose content, pasting properties, and SC baking quality. Starches isolated from wheat flours of normal, single‐null partial waxy, double‐null partial waxy, and waxy endosperm were also tested for pasting properties and baked into SC. Double‐null partial waxy and waxy wheat flours produced SC with volume of 828–895 mL, whereas volume of SC baked from normal and single‐null partial waxy wheat flours ranged from 1,093 to 1,335 mL. The amylose content of soft white and club wheat flour was positively related to the volume of SC (r = 0.790, P < 0.001). Pasting temperature, peak viscosity, final viscosity, breakdown, and setback also showed significant relationships with SC volume. Normal and waxy starch blends having amylose contents of 25, 20, 15, and 10% produced SCs with volume of 1,570, 1,435, 1,385, and 1,185 mL, respectively. At least 70 g of starch or at least 75% starch in 100 g of starch–gluten blend in replacement of 100 g of wheat flour in the SC baking formula was needed to produce SC having the maximum volume potential. Starch properties including amylose content and pasting properties as well as proportion of starch evidently play significant roles in SC baking quality of wheat flour.     

Effects of Varying Weight Ratios of Large and Small Wheat Starch Granules on Experimental Straight‐Dough Bread

One commercial bread wheat flour with medium strength (11.3% protein content, 14% mb) was fractionated into starch, gluten, and water solubles by hand‐washing. The starch fraction was separated further into large and small granules by repeated sedimentation. Large (10–40 μm diameter) and small (1–15 μm diameter) starch fractions were examined. Flour fractions were reconstituted to original levels in the flour using composites of varying weight percentages of starch granules: 0% small granules (100% large granules), 30, 60, and 100% (0% large granules). A modified straight‐dough method was used in an experimental baking test. Crumb grain and texture were significantly affected. The bread made from the reconstituted flour with 30% small granules and 70% large granules starch had the highest crumb grain score (4.0, subjective method), the highest peak fineness value (1,029), and the second‐highest elongation ratio (1.55). Inferior crumb grain scores and low fineness and elongation ratios were observed in breads made from flours with starch fractions with 100% small granules or 100% large granules. As the proportion of small granules increased in the reconstituted flour, it yielded bread with softer texture that was better maintained than the bread made from the reconstituted reference flour during storage.     

Influence of Amaranthus betacyanin pigments on the physical properties and color of wheat flours

The effect of betacyanin pigments from Amaranthus tricolor and Amaranthus cruentus on chromatic and physicochemical properties of three wheat flours was studied. Addition of Amaranthus betacyanins increased the gelatinization temperatures (T(o), T(p), and T(c)) of all wheat flours without altering their transition ranges (T(c)-T(o)). The melting enthalpies (DeltaH) were either increased or decreased depending on the types of flour and pigment. Amaranthus betacyanins decreased the peak viscosity (PV), hot paste viscosity (HPV), cold paste viscosity (CPV), setback (SB), and pasting time (PT) of all flours and increased the breakdown (BD). Texture profile analysis (TPA) showed that Amaranthus betacyanins decreased hardness, and gumminess, and increased cohesiveness of all gels, without altering adhesiveness. Chromatic investigation exhibited that A. tricolor and A. cruentus pigments imparted gels with red and orange-yellow hues with favorable color stability.     

Impact of Characteristics of Different Wheat Flours on the Quality of Frozen Cooked Noodles

In this study, the impact of characteristics (physicochemical, rheological, and pasting properties) of different wheat flours on the quality of frozen cooked noodles was investigated. In this sample set, results showed the cooking loss of noodles related negatively to flour swelling power. The water absorption of noodles related negatively to the dough stability time, the area, and the resistance to extension. The wheat flour with higher dough development time resulted in frozen cooked noodles with higher hardness, chewiness, and adhesiveness. Springiness of noodles correlated negatively to degree of softening. The tensile properties of frozen cooked noodles were influenced by rheological and pasting properties of wheat flours. The present study indicated high quality of frozen cooked noodles demanded wheat flours with high dough gluten strength, peak viscosity, and final viscosity and with low pasting temperature.     

Physicochemical Properties of Common and Tartary Buckwheat Starch

Physicochemical properties of starch of three common (Fagopyrum esculentum) and three tartary (F. tataricum) buckwheat varieties from Shanxi Province, China, were compared. Starch color, especially b*, differed greatly between tartary (7.99–9.57) and common (1.97–2.42) buckwheat, indicating that removal of yellow pigments from tartary buckwheat flour may be problematic during starch isolation. Starch swelling volume in water of reference wheat starch (2.8% solids and 92.5°C) was 20.1 mL; for the three common buckwheat starches it was 27.4–28.0 mL; and for the three tartary buckwheat starches it was 26.5–30.8 mL. Peak gelatinization temperature (T_p) in water was 63.7°C for wheat starch, 66.3–68.8°C for common buckwheat and 68.8–70.8°C for tartary buckwheat. T_p of all samples was similarly delayed (by 4.0–4.8°C) by 1% NaCl. Enthalpy of gelatinization (ΔH) was higher for all six buckwheat starches than it was for wheat starch. However, one common buckwheat sample had significantly lower ΔH than the others. Starch pasting profiles, measured by a Rapid Visco-Analyzer, were characteristic and similar for all six buckwheat starches, and very different from the reference wheat starch. A comparison of pasting characteristics of common and tartary buckwheat starches to wheat starch indicated similar peak viscosity, higher hot paste viscosity, higher cool paste viscosity, smaller effect of NaCl on peak viscosity, and higher resistance to shear thinning. Texture profile analysis of starch gels showed significantly greater hardness for all buckwheat samples when compared to wheat starch.     

Rheological and Pasting Properties of Buckwheat (Fagopyrum esculentum Möench) Flours With and Without Jet‐Cooking

Pasting, rheological, and water‐holding properties of buckwheat (Fagopyrum esculentum) flour obtained from whole achenes separated into three particle sizes, and three commercial flours (Fancy, Supreme, and Farinetta) were measured with or without jet‐cooking. Fancy had instantaneous paste viscosity (measured using RVA) after jet‐cooking that was not observed for Supreme or Farinetta, and paste viscosity was lower for the latter two flours. Supreme jet‐cooked flour exhibited higher peak viscosity than flour without jet‐cooking, and paste exhibited high shear‐thinning. Fancy exhibited strongest viscoelastic properties (measured using a rheometer). Jet‐cooking damaged buckwheat flour structure, thereby reducing viscoelasticity. Buckwheat flour pastes experienced shear‐thinning over a wide range of shear rates. Jet‐cooking greatly enhanced water‐holding capacity. Buckwheat flour particle size did not greatly influence paste viscosity. Study showed buckwheat flours have unique pasting and rheological characteristics that have different food applications, which could especially be useful for people with celiac disease as buckwheat is gluten‐free.     

Physicochemical and Structural Characteristics of Flours and Starches from Waxy and Nonwaxy Wheats

A waxy spring wheat (Triticum aestivum L.) genotype was fractionated into flour and starch by roller and wet‐milling, respectively. The resultant flour and starch were evaluated for end‐use properties and compared with their counterparts from hard and soft wheats and with commercial waxy and nonwaxy corn (Zea mays L.) starches. The waxy wheat flour had exceptionally high levels of water absorption and peak viscosity compared with hard or soft wheat flour. The flour formed an intermediate‐strength dough that developed rapidly and was relatively susceptible to mixing. Analysis by differential scanning calorimetry and X‐ray diffractometry showed waxy wheat starch had higher gelatinization temperatures, a greater degree of crystallization, and an absence of an amylose‐lipid complex compared with nonwaxy wheat. Waxy wheat and corn starches showed greater refrigeration and freeze‐thaw stabilities than did nonwaxy starches as demonstrated by syneresis tests. They were also similar in pasting properties, but waxy wheat starch required lower temperature and enthalpy to gelatinize. The results show analogies between waxy wheat and waxy corn starches, but waxy wheat flour was distinct from hard or soft wheat flour in pasting and mixing properties.     

Baking Formula Innovation to Eliminate Chlorine Treatment of Cake Flour

Chlorine treatment of soft wheat flour improves cake volume and produces a stiffer, more resilient crumb. Four pairs of chlorine‐treated and untreated flours were obtained. A selected portion of the area under the Rapid Visco Analyser hot pasting flour viscosity curve was used to determine how much starch could be used with a nonchlorine‐treated flour so that the area is equivalent to that produced by a chlorine‐treated cake flour with no added starch. Replacement of nonchlorine‐treated flour with up to 43% starch produced areas under the pasting curve that were equivalent to those produced by chlorine‐treated flours. Increased concentration of dried egg albumen plus added soya lecithin and xanthan gum were included in the formulation containing starch and nonchlorine treated flour to produce a new basic ingredient set. The basic ingredient set was evaluated for its influence on cake geometry, crumb structure, and crumb texture response to compression (hardness and spring‐back rate). High‐ratio white layer cakes using the new basic ingredient set produced similar or better cake quality characteristics than those produced using control chlorine‐treated flours. The same new basic ingredient set was used to produce pound cakes, cupcakes, and sheet cakes using nonchlorinated flours. The geometry and objective texture of those cakes also were equivalent to respective cakes produced with chlorine‐treated flour. The basic ingredient set does not require any special flour treatment.     

Amylose-lipid complexes as controlled lipid release agents during starch gelatinization and pasting

The effect of amylose-lipid (AM-L) complexes consisting of amylose populations with different peak degrees of polymerization (DP) and complexed with glyceryl monostearate (GMS) or docosanoic acid (C22) on the pasting properties of wheat and rice starches was evaluated with a rapid visco analyzer (RVA). AM-L complexes were formed by both (i) addition of lipids to amylose fractions with peak DP 20, 60, 400, or 950 at 60 degrees C or (ii) potato phosphorylase-catalyzed amylose synthesis in the presence of lipids. All AM-L complexes affected pasting properties in line with their dissociation characteristics. AM-L complexes therefore have potential as "controlled lipid release agents" with effects markedly different from those observable with emulsifier addition in starch pasting. More in particular, short chain AM-L complexes resulted in a starch pasting behavior comparable to that of cross-linked starch, as evidenced by reduced granule swelling, good viscosity stability in conditions of high temperature and shear, and a stable cold paste viscosity.