The Axial Oxygen Atom and Superconductivity in YBa2Cu3O7

Changes in the copper K-edge x-ray absorption spectrum of YBa(2)Cu(3)O(7) across the critical temperature indicate that, accompanying the superconducting transition, the mean square relative displacement of some fraction of the Cu2-O4 bonds becomes smaller or more harmonic (or both), that there may be a slight increase in the associated Cul-O4 distance, and that electronic states involving these atom pairs become more atomic-like. If there is an association between the superconductivity and this lattice instability, then the bridging axial oxygen is of central importnce in determining the high tranition temperature of YBa(2)Cu(3)O(7). Because this structural perturbation will affect the dynamic polrizability of the copper oxygen sublattice, it is consistent with an excitonic pairing mhanism in these materials.     

Spatially Resolved Observation of Supercurrents Across Grain Boundaries in YBaCuO Films

Spatially resolved resistivity measurements of current transport across individual grain boundaries have been made on superconducting YBa(2)Cu(3)O(7). These experiments were done by low-temperature scanning electron microscopy with a resolution of 1 to 2 micrometers, and they show directly the limitation of the critical current density caused by grain boundaries in YBa(2)Cu(3)O(7). Furthermore, complex spatial patterns of the current transport across grain boundaries were observed. These patterns reflect self-excited resonances of the grain boundaries and are closely correlated to the unexplained "sub-gap structure" in the current-voltage characteristics of polycrystalline YBa(2)Cu(3)O(7).     

The spin excitation spectrum in superconducting YBa(2)Cu(3)O(6.85)

A comprehensive inelastic neutron scattering study of magnetic excitations in the near optimally doped high-temperature superconductor YBa(2)Cu(3)O(6.85) is presented. The spin correlations in the normal state are commensurate with the crystal lattice, and the intensity is peaked around the wave vector characterizing the antiferromagnetic state of the insulating precursor, YBa(2)Cu(3)O(6). Profound modifications of the spin excitation spectrum appear abruptly below the superconducting transition temperature T(c), where a commensurate resonant mode and a set of weaker incommensurate peaks develop. The data are consistent with models that are based on an underlying two-dimensional Fermi surface, predicting a continuous, downward dispersion relation connecting the resonant mode and the incommensurate excitations. The magnetic incommensurability in the YBa(2)Cu(3)O(6+)(x) system is thus not simply related to that of another high-temperature superconductor, La(2-)(x)Sr(x)CuO(4), where incommensurate peaks persist well above T(c). The temperature-dependent incommensurability is difficult to reconcile with interpretations based on charge stripe formation in YBa(2)Cu(3)O(6+x) near optimum doping.     

A-Axis--Oriented YBa2Cu3O7/PrBa2Cu3O7 Superlattices

A modulated structure has been fabricated from high transition temperature superconductors where the individual CuO(2) planes are composed of alternating superconducting and insulating strips. This structure is made by growing a-axis-oriented YBa(2)Cu(3)O(7)/PrBa(2)Cu(3)O(7) superlattices by 90 degrees off-axis sputtering on (100)SrTiO(3) and (100)LaAlO(3) substrates. Superlattice modulation is observed to a modulation wavelength of 24 angstroms (12 angstroms-YBa(2)Cu(3)O(7)/12 angstroms-PrBa(2)Cu(3)O(7)), both by x-ray diffraction and by cross-sectional transmission electron microscopy. Rutherford backscattering spectroscopy indicates a high degree of crystalline perfection with a channeling minimum yield of 3 percent. Quasi-one-dimensional conductivity should be obtainable in these structures.     

Axial oxygen-centered lattice instabilities and high-temperature superconductivity

Copper K-edge x-ray absorption data indicate that an axial oxygen-centered lattice instability accompanying the 93 K superconducting transition in YBa(2)Cu(3)O(7) is of a pseudo-(anti)ferroelectric type, in that it appears to involve the softening of a double potential well into a structure in which the difference between the two copper-oxygen distances and the barrier height have both decreased. This softer structure is present only at temperatures within a fluctuation region around the transition. A similar process involving the analogous axial oxygen atom also accompanies the superconducting transition in T1Ba(2)Ca(3)Cu(4)O(11), where the superconducting transition temperature T(c) is ~120 K. The mean square relative displacement of this oxygen atom in YBa(2)Cu(3)O(7) is also specifically affected by a reduction in the oxygen content and by the substitution of cobalt for copper, providing further evidence for the sensitivity of the displacement to additional factors that also influence the superconductivity. On the basis of the implied coupling of this ionic motion to the superconductivity, a scenario for high-temperature superconductivity is presented in which both phonon and electronic (charge transfer) channels are synergistically involved.     

Possible Evidence for Superconducting Layers in Single Crystal YBa2Cu3O7-x by Field Ion Microscopy

The high-transition-temperature superconducting ceramic material YBa(2)Cu(3)O(7-x) (0< x < 0.5) has been examined by field ion microscopy. Specimens from nominally superconducting and nonsuperconducting samples(determined by magnetic susceptibility measurements) were studied by field ion microscopy and significant differences were found. Preferential imaging of atomic or molecular layers, due to preferential field evaporation, field ionization, or both, was found in the superconducting phase below the transition temperature and is interpreted as possible evidence for the occurrence of relatively highly conducting layers in the YBa(2)Cu(3)O(7-x) unit cell perpendicular to the orthorhombic c-axis. Similar results were obtained for YbBa(2)Cu(3)(7-x).     

Ultrafast mid-infrared response of YBa(2)Cu(3)O(7-delta)

Optical spectra of high-transition-temperature superconductors in the mid-infrared display a gap of in-plane conductivity whose role for superconductivity remains unresolved. Femtosecond measurements of the mid-infrared reflectivity of YBa(2)Cu(3)O(7-delta) after nonequilibrium optical excitation are used to demonstrate the ultrafast fill-in of this gap and reveal two gap constituents: a picosecond recovery of the superconducting condensate in underdoped and optimally doped material and, in underdoped YBa(2)Cu(3)O(7-delta), an additional subpicosecond component related to pseudogap correlations. The temperature-dependent amplitudes of both contributions correlate with the antiferromagnetic 41-millielectronvolt peak in neutron scattering, supporting the coupling between charges and spin excitations.     

Direct Observation of Microscopic Inhomogeneities with Energy-Dispersive Diffraction of Synchrotron-Produced X-rays

Evidence of structural inhomogeneities in two high-transition-temperature superconductors, YBa(2)Cu(3)O(7-delta) and Nd2-xCexCuO4-y, is presented. When samples were illuminated by highly collimated x-rays produced on a synchrotron wiggler, small changes in the lattice were detected over a spatial scale of 10 micrometers. These changes are interpreted as evidence of variations in the oxygen content in one case and in the cerium content in the other; both affect the superconducting properties. The existence of such structural inhomogeneities brings into question whether exotic experimental results obtained from superconducting materials with high transition temperatures actually reflect intrinsic properties.     

A New High-Temperature Superconductor: Bi2Sr3-x Cax Cu2O8+y

A new superconductor that displays onset behavior near 120 K has been identified as Bi(2)Sr(3-x)Ca(x)Cu(2)O(8+y), with x ranging from about 0.4 to 0.9. Single crystal x-ray diffraction data were used to determine a pseudo-tetragonal structure based on an A-centered orthorhombic subcell with a = 5.399 A, b= 5.414A, and c = 30.904 A. The structure contains copper-oxygen sheets as in La(2)CuO(4) and YBa(2)Cu(3)O(7), but the copper-oxygen chains present in YBa(2)Cu(3)O(7) do not occur in Bi(2)Sr(3-x)Ca(x)Cu(2)O(8+y). The structure is made up of alternating double copper-oxygen sheets and double bismuth-oxygen sheets. There are Ca(2+) and Sr(2+) cations between the adjacent Cu-O sheets; Sr(2+) cations are also found between the Cu-O and Bi-O sheets. Electron microscopy studies show an incommensurate superstructure along the a axis that can be approximated by an increase of a factor of 5 over the subcell dimension. This superstructure is also observed by x-ray diffraction on single crystals, but twinning can make it appear that the superstructure is along both a and b axes. Flux exclusion begins in our samples at about 116 K and is very strong by 95 K. Electrical measurements on a single crystal of Bi(2)Sr(3-x)Ca(x)Cu(2)O(8+y) show a resistivity drop at about 116 K and apparent zero resistivity at 91 K.     

Epitaxial cuprate superconductor/ferroelectric heterostructures

Thin-film heterostructures of Bi(4)Ti(3)O(12)Bi(2)Sr(2)CuO(6+x), have been grown on single crystals of SrTiO(3), LaAlO(3), and MgAl(2)O(4) by pulsed laser deposition. X-ray diffraction studies show the presence of c-axis orientation only; Rutherford backscattering experiments show the composition to be close to the nominal stoichiometry. The films are ferroelectric and exhibit a symmetric hysteresis loop. The remanent polarization was 1.0 microcoulomb per square centimeter, and the coercive field was 2.0 x 10(5) volts per centimeter. Similar results were obtained with YBa(2)Cu(3)O(7-x) and Bi(2)Sr(2)CaCu(2)O(8+x), and single-crystal Bi(2)Sr(2)CuO(6+x)as the bottom electrodes. These films look promising for use as novel, lattice-matched, epitaxial ferroelectric film/electrode heterostructures in nonvolatile memory applications.     

Epitaxial and Smooth Films of a-Axis YBa2Cu3O7

YBa(2)Cu(3)O(7) films have been grown epitaxially on SrTiO(3) (100) and LaAlO(3) (100) substrates with nearly pure a-axis orientation and with transition temperature T(c) (R = 0) of 85 K. A unique feature of these films is their smooth surface. These smooth surfaces enable the growth of short-period superlattices with well-defined modulations. The films are untwinned and the grains grow with their c-axis along one of two perpendicular directions on the substrate ([100] or [010]). The fabrication of sandwich-type Josephson junctions with good characteristics may now be possible because unlike c-axis-oriented films, the superconducting coherence length of these smooth films is appreciably large perpendicular to their surfaces.     

Nuclear Resonance Properties of YBa2Cu3O6+x Superconductors

Nuclear magnetic resonance (NMR) and nuclear quadrupole resonance (NQR) results for copper-63, oxygen-17, and yttrium-89 nuclei in the superconducting composition range of YBa(2)Cu(3)O(6+x) (0.4 相似文献   

Atomic Control of the SrTiO3 Crystal Surface

The atomically smooth SrTiO(3) (100) with steps one unit cell in height was obtained by treating the crystal surface with a pH-controlled NH(4)F-HF solution. The homoepitaxy of SrTiO(3) film on the crystal surface proceeds in a perfect layer-by-layer mode as verified by reflection high-energy electron diffraction and atomic force microscopy. Ion scattering spectroscopy revealed that the TiO(2) atomic plane terminated the as-treated clean surface and that the terminating atomic layer could be tuned to the SrO atomic plane by homooepitaxial growth. This technology provides a well-defined substrate surface for atomically regulated epitaxial growth of such perovskite oxide films as YBa(2)Cu(3)O(7-delta).     

Submicrometer Superconducting YBa2Cu3O6+x Particles Made by a Low-Temperature Synthetic Route

Evidence suggests that superconducting, orthorhombic YBa(2)Cu(3)O(6+x)+ (x greater, similar 0.5) is always produced by oxidation of the oxygen-deficient, tetragonal form (x less, similar 0.5) of this phase (commonly referred to as 123). A synthetic route whereby solution-derived, carbon-free precursors are decomposed at 650 degrees to 700 degrees C in inert atmosphere to yield tetragonal 123 is now available. Appropriate precursors include hydrated oxides derived from the hydrolysis of organometallic solutions and aqueous solution-derived hyponitrites. Subsequent oxidation of the tetragonal phase at 400 degrees C results in submicrometer particles of orthorhombic 123. Superconductivity (T(c) onset approximately 87 K) has been confirmed in these materials by both Meissner effect and specific-heat measurements.     

Direct observation of structural defects in laser-deposited superconducting y-ba-cu-o thin films

The defect structure of in situ pulsed, laser-deposited, thin films of the high-transition temperature superconductor Y-Ba-Cu-O has been observed directly by atomic resolution electron microscopy. In a thin film with the nominal composition YBa(2)Cu(3)O(7) (123), stacking defects corresponding to the cationic stoichiometry of the 248, 247, and 224 compounds have been observed. Other defects observed include edge dislocations and antiphase boundaries. These defects, which are related to the nonequilibrium processing conditions, are likely to be responsible for the higher critical currents observed in these films as compared to single crystals.     

The magnon pairing mechanism of superconductivity in cuprate ceramics

The magnon pairing mechanism is derived to explain the high-temperature superconductivity of both the La2-xSrxCu(1)O(4) and Y(1)Ba(2)Cu(3)O(7) systems. Critical features include (i) a one- or two-dimensional lattice of linear Cu-O-Cu bonds that contribute to large antiferromagnetic (superexchange) coupling of the Cu(II)(d(9)) orbitals; (ii) holes in the oxygen ppi bands [rather than Cu(III)(d(8))] leading to high mobility hole conduction; and (iii) strong ferromagnetic coupling between oxygen ppi holes and adjacent Cu(II)(d(9)) electrons. The ferromagnetic coupling of the conduction electrons with copper d spins induces the attractive interaction responsible for the superconductivity, leading to triplet-coupled pairs called "tripgems." The disordered Heisenberg lattice of antiferromagnetically coupled copper d spins serves a role analogous to the phonons in a conventional system. This leads to a maximum transition temperature of about 200 K. For La(1.85)Sr(0.15)Cu(1)O(4), the energy gap is in excellent agreement with experiment. For Y(1)Ba(2)Cu(3)O(7), we find that both the CuO sheets and the CuO chains can contribute to the supercurrent.     

Oxygen isotope effect in high-temperature oxide superconductors

The effect of oxygen isotope substitution on the superconducting transition temperature, T(c), has been measured for BaBi(0.25)Pb(0.75)O(3) (T(c), approximately 11 K) and Lal(1.85) Ca(0.15)CuO(4) (T(c) approximately 20 K), and is compared to the shifts observed for La(1.85)Sr(0.15)CuO(4) (T(c) approximately 37 K) and YBa(2)Cu(3)O(7) (T(c) approximately 92 K). For all four materials, the transition temperature is shifted to lower temperature upon substitution of oxygen-18 for oxygen-16. The observed shifts demonstrate that phonons are involved in the electron-pairing mechanism in these oxide superconductors.     

Growth Mechanism of Sputtered Films of YBa2Cu3O7 Studied by Scanning Tunneling Microscopy

The surface microstructures of c-axis-oriented films of YBa(2)Cu(3)O(7), deposited by off-axis magnetron sputtering on MgO and SrTiO(3) single crystal (100) substrates, have been investigated with scanning tunneling microscopy and atomic force microscopy. There is strong evidence that the films nucleate as islands and grow by adding material to the edge of a spirally rising step. This results in columnar grains, each of which contains a screw dislocation at its center. This microstructure may be of significance in determining superconducting properties such as critical current, and represents a significant difference between thin films (especially those grown in situ) and bulk materials.     

The Impact of High-Temperature Superconductivity on SQUID Magnetometers

DC and RF Superconducting QUantum Interference Devices (SQUIDs) fabricated from low transition temperature (T(c)) superconductors and operated at liquid (4)He temperatures are routinely used as ultrasensitive detectors in many applications, for example, as magnetometers, magnetic gradiometers, voltmeters, and motion detectors. SQUIDs fabricated from high T(c) superconductors such as YBa(2)Cu(3)O(7) and operated in liquid nitrogen at 77 K offer a greater convenience in operation at the expense of a poorer noise performance, particularly at low frequencies. The resolution of SQUID-based magnetometers is compared with that of other types of magnetometers operatng at ambient temperatures.     

Spatially Resolved Observation of Static Magnetic Flux States in YBa2Cu3O7-dgr Grain Boundary Josephson Junctions

With low-temperature scanning electron microscopy, the magnetic flux states in high critical temperature Josephson junctions have been imaged. The experiments were performed with YBa(2)Cu(3)O(7-delta) thin-film grain boundary Josephson junctions fabricated on [001] tilt SrTiO(3) bicrystals. For applied magnetic fields parallel to the grain boundary plane, which correspond to local maxima of the magnetic field dependence of the critical current, the images clearly show the corresponding magnetic flux states in the grain boundary junction. The spatial modulation of the Josephson current density by the external magnetic field is imaged directly with a spatial resolution of about 1 micrometer.