Fabrication of silver nanoparticle/polyvinyl alcohol/polycaprolactone hybrid nanofibers nonwovens by two-nozzle electrospinning for wound dressing

In this study, two biodegradable polymers, polycaprolactone (PCL) and polyvinyl alcohol (PVA) were used to fabricate nanofiber nonwovens (NFNs). Also, the silver nanoparticles (AgNPs) successfully reduced by using tea polyphenols (TP) and incorporated in the NFNs via electrospinning. The morphologies of the NFNs and AgNPs were analyzed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), respectively. The PCL nanofibers and PVA nanofibers interweaved each other, and AgNPs with average diameter 1.53±0.15 nm were embedded in the PVA nanofibers. The properties of electrospun NFNs were characterized by pore property, swelling/weight loss, water contact angle, mechanical property, and antibacterial activity. The nanofibers cross-linked to each other forming the 3Dnetwork porous structure with diameter about 1-1.5 μm. Although the hydrophobic PCL was added in the hybrid NFNs, the NFNs still showed hydrophilic propriety, high swelling degree (i.e. swelling degree is 330 % for 48 h), and low weight loss (i.e. weight loss is 22.4 % for 48 h). Also, the hybrid PCL/PVA/AgNPs NFNs exhibited a suitable mechanical property for wound dressings (i.e. tensile strength is 4.27 MPa, and breaking elongation is 88 %). Moreover, the hybrid NFNs effectively inhibited growth of Escherichia coli and Staphylococcus aureus. In summary, this PCL/PVA/AgNPs NFNs may provide a promising candidate for accelerating wound healing.     

Preparation and properties of polyvinyl alcohol/tannic acid composite film for topical treatment application

The purpose of this study was to develop an effective potential wound dressing material based on a polyvinyl alcohol (PVA) and tannic acid (TA) composite film. To prepare the PVA/TA films, PVA and TA blended aqueous solutions were cast into film form by spreading the solutions and drying them. Then the films were heat treated at 155 oC for 3 min to promote esterification between the PVA and TA. After removing un-crosslinked moieties from the films by rinsing and drying, the films were investigated by swelling behavior, FTIR spectroscopy, XRD and TGA. And, the antibacterial and antioxidant abilities of the films were also examined in this study. Through this investigation it was discovered that TA effectively acts as a functional antibacterial and antioxidant agent as well as crosslinker in the PVA/TA system. Thus, the PVA/TA composite films prepared by the casting and heat treatment method proposed in this study are expected to be used for topical medication, such as wound dressing material.     

Effects of the reaction degree of melamine-formaldehyde resin on the structures and properties of melamine-formaldehyde/polyvinyl alcohol composite fiber

Composite fibers made of polyvinyl alcohol (PVA) and melamine-formaldehyde (MF) resins with different reaction degrees were prepared by wet spinning. The phase structures of MF/PVA spinning dopes and composite fibers were observed by using optical microscope (OM) and scanning electron microscope with energy-dispersive X-ray spetroscopy (SEM-EDS). Crystal structures of composite fibers were studied by X-ray diffraction (XRD) and differential scanning calorimetry (DSC). The loss of MF resins in the spinning process was calculated by using Kjeldahl. The mechanical properties, the flame retardant property, the water resistant property, and the thermal stability of composite fibers were also tested. Results show that with an increase in the reaction degree of MF resin, the phase separation degrees of spinning dopes and composite fibers rise up, the size of MF microphase grows larger, and the loss of MF resin diminishes; consequently, the hot water resistance and the flame retardancy of the fiber ameliorate while the tensile strength and the thermal stability perform a tendency of dropping after rising.     

Preparation and performance as PEM of sulfonated pre-oxidized nanofiber/SPEEK composite membrane

Building proton transfer channel is an important strategy to optimize the proton transfer process of the proton exchange membrane (PEM). In this work, sulfonated pre-oxidized nanofibers were prepared by solution blowing of polyacrylonitrile (PAN) nanofibers followed by pre-oxidization and sulfonating, and the nanofibers were composited with SPEEK to enhance its performance as PEM. The results of the proton conductivity verified that the employment of sulfonated pre-oxidized nanofibers improved the proton conductivity. Meanwhile, the introduction of the sulfonated pre-oxidized nanofibers realized the upgrades of the thermostability and water absorbency of the membrane, and led to the decrease of the swelling property and methyl alcohol’s permeability of the material. It is indicated that the composite membrane is promising materials for PEM fuel cells.