Molecular analysis of introgression lines from Cucumis hystrix Chakr. to C. sativus L

Two stable introgression lines (ILs), IL56 and IL73 with fourteen chromosomes, derived from a cross between the wild relative Cucumis hystrix Chakr. (2n = 24) and the cultivated cucumber “beijingjietou” (Cucumis sativus L., 2n = 14) were characterized using SSR and AFLP markers. Twenty-three SSR primers were used to detect the introgression from C. hystrix to C. sativus, and one locus at 210 bp was revealed and assigned to introgressive fragment of C. hystrix genome in IL56. Substantial genomic changes in these two lines were detected by AFLP analysis with thirty different primer combinations. C. hystrix-specific bands, novel bands for the two parents and deleted bands in C. sativus were observed. One hundred and forty-seven polymorphic bands were observed, but only four and five introgressed bands were found in IL56 and IL73, respectively. Although representing only a small proportion of the C. hystrix genome, these two introgression lines with downy mildew and fusarium wilt resistance will be valuable to resistant genetics and breeding.     

枇杷LTR类反转录转座子RT序列的克隆及分析

[目的]揭示枇杷LTR类反转录转子座RT序列在枇杷基因组中的异质性,为枇杷转座子进化和多样性研究提供依据.[方法]以普通枇杷野生种质的叶片为材料,通过简并引物从枇杷基因组中扩增得到Ty1-copia和Ty3-gypsy类反转录转座子反转录酶序列,并对其序列变化特点进行生物信息学分析.[结果]最终获得38条Ty1-cop...     

Conservation of Vanilla species, in vitro

Vanilla (Vanilla planifolia) is a crop of great commercial importance as the source of natural vanillin, a major component of flavor industry. The primary gene pool of V. planifolia is narrow and is evidently threatened due to destruction of its natural habitats making the secondary gene pool important as a source of desirable traits especially for resistance to diseases. Many species of vanilla are considered rare and endangered hence an urgent need to conserve them, arises. Effective procedures for micropropagation and in vitro conservation by slow growth in selected species of vanilla, are described. Synthetic seed technology was standardized by encapsulating 3–5 mm in vitro regenerated shoot buds and protocorms in 4% sodium alginate, which could be stored up to 10 months with 80% germination in sterile water at 22 ± 2 °C. In vitro conservation technology of Vanilla was standardized and shoot cultures could be maintained for more than 1 year without subculture, on slow growth medium, i.e. Murashige and Skoog medium supplemented with 15 g l⁻¹ each of sucrose and mannitol in sealed culture vessels at 22 ± 2 °C. These cultures were maintained in vitro for more than 7 years with yearly subculture. The conserved material could be retrieved and multiplied normally in MS medium with 1.0 mg l⁻¹ BA and 0.5 mgl ⁻¹ IBA. The in vitro conserved plants showed good growth and developed into normal plants. This synseed and in vitro conservation system can be utilized for conservation and exchange of vanilla genetic resources.     

Evaluation of ‘Hamlin’ sweet orange + ‘Montenegrina’ mandarin somatic hybrid for tolerance to Xanthomonas axonopodis pv. citri and Xylella fastidiosa

Asiatic citrus canker (ACC), caused by Xanthomonas axonopodis Starr & Garces pv. citri (Hasse) Vauterin et al., and citrus variegated chlorosis (CVC), caused by Xylella fastidiosa Wells et al., are considered the main diseases affecting sweet orange scion varieties in Brazil. Among commercial varieties, mandarins and tangerines are recognized as tolerant to these pathogens. We report herein the production of ‘Hamlin’ sweet orange (Citrus sinensis L. Osbeck) + ‘Montenegrina’ mandarin (Citrus deliciosa Ten.) allotetraploid somatic hybrid plants by protoplast fusion with improved disease tolerance that could be used as a donor of resistance genes in interploid hybridisation. Somatic hybridisation was confirmed by leaf morphology, flow cytometry and RAPD analyses. The somatic hybrid was propagated by grafting and cultivated in a screenhouse for tolerance assays. For X. axonopodis pv. citri assays, buds were collected from both ‘Hamlin’ sweet orange and the somatic hybrid and grafted onto ‘Cleopatra’ mandarin (Citrus reshni hort. ex Tanaka). As a negative control, buds from ‘Mexerica Tardia’ mandarin (C. deliciosa) were collected and grafted onto ‘Cleopatra’ mandarin. Two-month old plants with at least one young vegetative flush were individually spray-inoculated with a 10⁶ CFU mL⁻¹X. axonopodis pv. citri suspension and incubated in a growth chamber, at 27 °C, under 16-h photoperiod. The somatic hybrid showed a statistically significant reduction in susceptibility to ACC 30 days after inoculation. Compared to ‘Hamlin’ sweet orange, disease severity was reduced by 70%, with similar tolerance to that of the mandarin negative control. For X. fastidiosa assays, buds were collected from the somatic hybrid and its parental plants and grafted onto ‘Rangpur’ lime (Citrus limonia Osbeck). The developed plants were needle-inoculated with a X. fastidiosa suspension (8.7 × 10¹⁰ CFU mL⁻¹) into the new growth flush stem. Bacterial population was quantified both at 4 (at the inoculation point) and 8 months (50 cm above the inoculation point) after inoculation. The first evaluation detected X. fastidiosa in 63% of ‘Hamlin’ sweet orange and ‘Hamlin’ + ‘Montenegrina’ mandarin samples. In the second evaluation, X. fastidiosa was detected in 47.4% of ‘Hamlin’ sweet orange and 10.5% of ‘Hamlin’ + ‘Montenegrina’ somatic hybrid samples, suggesting that bacterial movement was restricted in the somatic hybrid. X. fastidiosa was not detected in both evaluations in samples collected from leaves of ‘Montenegrina’ mandarin. These results indicate that the ‘Hamlin’ sweet orange + ‘Montenegrina’ mandarin somatic hybrid has potential for improved disease tolerance that should enhance its value regarding future use in citrus breeding programs.     

Different mechanisms to obtain higher fruit growth rate in two cold-tolerant cucumber (Cucumis sativus L.) lines under low night temperature

One cold-sensitive cultivar (Jinyan 4) and two cold-tolerant inbred lines (NY-1 and XC-1) of cucumber (Cucumis sativus L.) were subjected to temperatures of 28 °C/22 °C (day/night, control) or 28 °C/12 °C (day/night, cold treatment) in a 10 h photoperiod (7:00–17:00). Under control conditions, cucumber fruits grew fast during afternoon and early night, and slow during late night and morning. Under 28 °C/12 °C conditions, the two cold-tolerant inbred lines maintained relatively higher fruit growth rates than the cold-sensitive cultivar by different mechanisms. Compared to Jinyan 4, NY-1 fruits had higher growth rates during cold nights while XC-1 fruits grew faster during the next day. Under the 28 °C/12 °C temperature regime, the assimilate accumulation in the fruits of all tested genotypes followed a similar trend with the corresponding fruit growth rates. After a cold night treatment, the net CO₂ assimilation rates of one- and two-fruit plants, which had increased sink demand, were higher than that of plants without fruits in all tested genotypes. This response indicates that feedback inhibition might be an important reason for the reduction of photosynthesis on the next day. In addition, after a cold night treatment, the levels of exportable sugars (sucrose and stachyose) in mature leaves of XC-1 were higher than those measured in Jinyan 4 and NY-1, which might explain why XC-1 fruits had faster assimilate accumulation rates in the next morning. Higher activity of sucrose-phosphate synthase, a key enzyme of sucrose and stachyose biosynthesis, constituted an additional evidence that faster sucrose and stachyose biosynthesis in mature leaves may occur in XC-1 than in Jinyan 4 and NY-1 at that time. In conclusion, our results showed that cucumber genotypes may use different mechanisms to enhance their cold tolerance.     

Production protocol development for greenhouse cut Linaria, Lupinus, and Papaver flowers

Linaria maroccana Hook. f. Ann., ‘Lace Violet’, Lupinus hartwegii ssp. cruikshankii Lindl. ‘Sunrise’ and Papaver nudicaule L. ‘Meadow Pastels’ seeds were directly sown into 105 cell plug trays and received either ambient light or supplemental high intensity discharge (HID) lighting. For each species, a 2 × 3 × 3 factorial was used with two light intensities during propagation, three transplant stages, and three night temperatures. Seedlings were transplanted at the appearance of 2–3, 5–6, or 8–9 true leaves. Transplanted Linaria and Papaver seedlings were placed at 5/11, 10/16, or 15/21 ± 1 °C night/day temperatures and Lupinus seedlings were placed at 15/24, 18/25, or 20/26 ± 2 °C night/day temperatures. For this study, the optimum production temperature for Linaria was 10/16 °C as the cut stems produced at 15/21 °C were unmarketable and production time was excessively long at 5/11 °C. At 10/16 °C, Linaria seedlings should be transplanted at the 2–3 leaf stage to maximize stem number, stem length and profitability. For Lupinus the optimum temperature was 15/24 °C due to long stems and high profitability per plant. Lupinus seedlings should be transplanted at the 2–3 leaf stage when grown at 15/24 °C to obtain the longest and thickest stems; however, $/m² week was higher for plants transplanted at the 8–9 leaf stage due to less time in finishing production space. For Papaver, the 15/21 °C temperature was optimal as that temperature produced the longest stems in the shortest duration, resulting in the highest $/m² week. At 15/21 °C Papaver plants should be transplanted at the 2–3 leaf stage. Supplemental HID lighting had no effect on any of the species.     

High frequency early flowering from in vitro seedlings of Dendrobium nobile

Dendrobium nobile Lindl. is a popular temperate Chinese orchid commonly marketed as a traditional medicinal plant. Seedlings of Dendrobium nobile Lindl. produced floral buds (33.3–34.8%) precociously on a defined basal medium (1/2 MS) containing paclobutrazol (PP₃₃₃) at 0.5 mg L⁻¹ or thidiazuron (TDZ) at 0.1 mg L⁻¹ within 4 months of culturing. The frequency of floral buds formation can be further increased to 95.6% by growing seedlings in a PN (PP₃₃₃ 0.3 mg L⁻¹ + NAA 0.5 mg L⁻¹)-containing medium followed by transfer onto 1/2 MS medium with PP₃₃₃ and TDZ (PP₃₃₃ + TDZ). However, flower developed was deformed under 25 °C but it developed fully when grown in a lower temperature regime (23 °C/18 °C, light/dark) for 45 days. Under optimal condition, in vitro flowering was observed about 6 months after seed sowing.     

Chromosome doubling of Lychnis spp. by in vitro spindle toxin treatment of nodal segments

Lychnis (Caryophyllaceae) consists of about 30 species distributed throughout the temperate regions of the Northern Hemisphere, from East Asia to Europe. Many Lychnis spp. have high ornamental value and cultivated as pot or garden plants. In the present study, in vitro chromosome doubling of several Lychnis spp. was examined in order to widen their variability in horticultural traits. Initially effect of various spindle toxin treatments [100, 500 or 1000 mg l⁻¹ colchicine (COL), 10, 20 or 50 mg l⁻¹ oryzalin (ORY), or 1, 5, 10 mg l⁻¹ amiprophos-methyl (APM)] of nodal segments of a triploid genotype of L. senno (3x) was investigated on survival of nodal segments and chromosome doubling in nodal segment-derived plantlets. Significantly higher percentage (75.0%) of surviving segments after spindle toxin treatment was obtained in 10 mg l⁻¹ ORY treatment. Flow cytometry (FCM) analysis of leaf tissues showed that 9.4–13.8% of plantlets, which were derived from 10 to 20 mg l⁻¹ ORY, or 5 mg l⁻¹ APM treatments, were hexaploid (6x) or ploidy chimera (3x + 6x, 4x + 6x, 5x + 6x, 3x + 4x + 6x). The results obtained by FCM analysis were confirmed by chromosome observation in root tip cells. Thus 10 mg l⁻¹ ORY treatment of nodal segments is suitable for in vitro chromosome doubling of triploid L. senno. Efficient chromosome doubling was also achieved in diploid L. fulgens (2x) and L. sieboldii (2x) by treating nodal segments with 10 mg l⁻¹ ORY: 68.9–88.7% of nodal segments survived after ORY treatment, and 24.7–26.5% of plantlets derived from ORY-treated nodal segments were tetraploid (4x) or ploidy chimera (2x + 4x) in both species. These results indicate that the in vitro chromosome doubling method established for triploid L. senno may be applicable to a wide range of Lychnis spp. Tetraploid L. fulgens and L. sieboldii showed a compact plant form, and had thick stems and deep green leaves compared with the diploid mother plants. On the other hand, hexaploid L. senno showed very poor growth and died before flowering.     

Interspecific hybridization in Lonicera caerulea and Lonicera gracilipes: The occurrence of green/albino plants by reciprocal crossing

Lonicera caerulea L. var. emphyllocalyx (Maxim.) Nakai is a berry crop cultivated in cold regions. So far, commercial cultivars have been mainly introduced from selection of wild plants. Therefore, fruit traits and other agricultural characteristics have been limited. In this study, interspecific crosses between L. caerulea var. emphyllocalyx and Lonicera gracilipes var. glabra Miquel were examined to increase genetic variability of L. caerulea var. emphyllocalyx. Seedlings were obtained from reciprocal crosses between L. caerulea var. emphyllocalyx and L. gracilipes var. glabra. The hybrid nature of seedlings was confirmed with random amplified polymorphic DNA analysis. Viable green plants were obtained efficiently from L. gracilipes var. glabra × L. caerulea var. emphyllocalyx. In contrast, all plants produced from L. caerulea var. emphyllocalyx × L. gracilipes var. glabra were albino. These albino plants were very weak and only survived in culture condition. The chlorophyll deficiency was unilaterally observed, suggesting the occurrence of nuclear–cytoplasmic incompatibility. Viable F₁ hybrids obtained from L. gracilipes var. glabra × L. caerulea var. emphyllocalyx are amphidiploid (2n = 4x = 36) as showing same to both parents. The hybrid plants are expected to increase the variability of fruit traits, and may have heat tolerance from L. gracilipes var. glabra.     

Temperature and photoperiod control of morphology and flowering time in two greenhouse grown Hydrangea macrophylla cultivars

Knowledge of the factors involved, and tools to control morphology and flowering are important in intensive and cost-efficient greenhouse production. Hydrangea macrophylla is an important flowering pot plant in Norway and is produced year-around in greenhouses. Due to problems in scheduling, a study was conducted to compare floral transition and morphology of two commercially important cultivars of Hydrangea (‘Early Blue’ and ‘Schneeball’) under different flower initiating treatments in growth chambers. Plants were grown with high pressure sodium lamps (HPS) at moderate temperature (17 °C) (MT) and high (24 °C) temperature. At high temperature, the effect of (1) irradiance under long day conditions (16 h lighting with 70 or 200 μmol m⁻² s⁻¹), and (2) short day (8 h lighting) was investigated. The short day treatment had similar light integral as the low irradiance long day treatment (SD: 8 h × 140 μmol m⁻² s⁻¹ and LD: 16 h × 70 μmol m⁻² s⁻¹ = 4.0 mol m⁻² d⁻¹). The intention was to test the effect of irradiance and SD on flower transition and morphology under high temperatures. The results clearly showed that MT is the strongest signal for floral transition. MT resulted in a rapid floral transition of the terminal buds and lateral flower buds. A short forcing period was required and the plants became short and compact without any use of chemical growth retardants. At high temperatures only SD had a promotive effect on flower transition and the response was found to be stronger in ‘Schneeball’ than ‘Early Blue’. In general, all the treatments under high temperatures required a long forcing time and the plants tended to be very tall with a low number of lateral flower buds.     

Somatic embryogenesis and Agrobacterium-mediated transformation of Japanese apricot (Prunus mume) using immature cotyledons

This study describes a successful method of somatic embryogenesis and genetic transformation using immature cotyledons of Prunus mume. Immature cotyledons from four different developmental stages of eight different P. mume cultivars were used for the experiments to optimize somatic embryogenesis and genetic transformation protocols. Somatic embryogenesis was induced when the explants were cultured on somatic embryo inducing medium consisting of MS basic medium supplemented with 1 μM 2,4-dichlorophenoxyacetic acid (2,4-D) and 1 μM 6-benzyladenine (BA). They were cultured for 30 days and then transferred to somatic embryo propagation medium containing 0.1 μM α-naphthaleneacetic acid (NAA) and 5 μM BA. It appeared that the developmental stage of the immature cotyledons used as explants was the most important factor for somatic embryogenesis; higher frequencies of somatic embryogenesis were observed when the immature cotyledons were less than 5 mm in length regardless of cultivars. For genetic transformation, the immature cotyledons were inoculated with Agrobacterium tumefaciens EHA101 harbouring a binary plasmid vector with neomycin phosphotransferase II and an intron-interrupted β-glucuronidase gene under the control of cauliflower mosaic virus 35S promoter, and three transgenic plant lines were obtained from inoculated “Sirakaga” immature cotyledons. Transgenic somatic embryos and shoots were selected using 25 mg l⁻¹ kanamycin. Integration of transgenes in the genome of GUS-positive putative transgenic shoots was confirmed by PCR and Southern blot analyses.     

Factors affecting in vitro adventitious shoot formation on internode explants of Citrus aurantium L. cv. Brazilian

The in vitro formation of newly formed adventitious buds and shoots from internodal branch segments was studied on 12-month-old plants of Citrus aurantium L. cv. Brazilian. The effects of 6-Benzyladenine (BA) and α-Naphthalene acetic acid (NAA) treatments were evaluated on adventitious bud and shoot regeneration. High rates of bud initiation and shoot development were obtained both with BA supplemented medium, in the range from 1 mg L⁻¹ to 3 mg L⁻¹, and with 0.1 mg L⁻¹ NAA supplemented medium. NAA concentrations above 1 mg L⁻¹ significantly reduced bud initiation and shoot elongation. The results obtained using different in vitro culture vessels such as Petri dishes, tubes and glass culture jars were compared. The highest adventitious bud induction was observed in Petri dishes for internodes cultured in 2 mg L⁻¹ BA supplemented medium, with 95% responsive explants forming 9.0 ± 2.4 adventitious buds. The adventitious buds observed in Petri dishes reached a maximum height of 1 mm, with no further development, while some of the adventitious shoots cultured in tubes and glass culture jars grew over 1 cm in height. A shoot regeneration gradient of the internodes collected along the branch axis was noticed, with basal ones exhibiting higher regeneration frequency.     

Interspecific variations in seed germination of Corylopsis

This study was initiated to investigate the differences in germination percentages and rates between Corylopsis coreana Uyeki and Corylopsis sinensis var. calvescens Rehder & E.H. Wilson following a warm stratification (WS) and cold stratification (CS), and to study the effect of different WS temperatures interacting with different durations of CS. Warm stratification at 10 °C, 15 °C, 20 °C, and 25 °C was given for 1 month (1 M 10 °C, 15 °C, 20 °C, and 25 °C WS) followed by 0 M, 1 M, 2 M, and 3 M of CS at 5 °C (0 M, 1 M, 2 M, 3 M CS) and seeds were germinated in an air conditioned greenhouse maintained at 18.5 °C/18 °C. On average, less than 1% of C. coreana seeds germinated when sown without any WS and CS or with 1 M 15 °C, 20 °C, and 25 °C WS without CS treatment. However, 26% C. coreana seeds germinated after 1 M 10 °C WS without any CS treatment. Germination was not affected by WS temperatures when followed by 2 M 5 °C CS. It is concluded that C. coreana exhibited low seed germination at 10 °C and that this temperature could be considered the upper limit of CS for C. coreana. Only 2 M CS was required for more than 90% seeds to germinate. However, C. sinensis var. calvescens required longer than 3 M CS for more than 29% seeds to germinate. This clearly shows that there is an interspecific variation in optimum dormancy-breaking requirements.     

Efficient in vitro multiplication in Ornithogalum ulophyllum Hand.-Mazz. from twin scale explants

Ornithogalum ulophyllum Hand.-Mazz. with beautiful white flowers is an important medicinal and ornamental plant of the Middle Eastern countries and need exploitation for commercial propagation. The study reports in vitro mass proliferation of bulblets achieved from twin scales and “in vitro regenerated bulblet” explants on MS medium supplemented with various concentrations of BAP–NAA. The best regeneration on twin scales and “in vitro regenerated bulblets” was obtained on MS medium containing 2 mg l⁻¹ BAP–0.5 mg l⁻¹ NAA and 2 mg l⁻¹BAP–1 mg l⁻¹ NAA, respectively. However, bulb scales seemed to be more potent for bulblet regeneration. A large number of the developing bulblets rooted on the regeneration medium. Remaining non-rooting bulblets were rooted on MS medium containing 1 mg l⁻¹ NAA. All plants were acclimatized in the environmental chamber for 4 weeks and were transferred to the greenhouse for flowering. Regenerated bulblets developed into morphologically normal plants.     

Production of inter-section hybrids between Primula filchnerae and P. sinensis through ovule culture

Inter-section hybrids were obtained in the reciprocal crosses between Primula filchnerae (2n = 2x = 24) of Sect. Pinnatae and P. sinensis ‘Fanfare’ (2n = 2x = 24) of Sect. Auganthus by rescuing ovules on half-strength (1/2) Murashige and Skoog's (MS) medium supplemented with 50 g l⁻¹ sucrose, 2.5 g l⁻¹ gellan gum, 0.1 mg l⁻¹ α-naphthaleneacetic acid (NAA), 0.1 mg l⁻¹ 6-benzyladenine (BA) and 50 mg l⁻¹ gibberellic acid (GA₃). In ovule culture, germination occurred with radicle elongation but no plumule was observed. The radicle kept on the initial medium showed root proliferation with callus formation. When the calluses were transferred to (1/2)MS media containing 30 g l⁻¹ sucrose and 3 g l⁻¹ gellan gum, without plant growth regulators (PGRs) or with 1 mg l⁻¹ zeatin and 0.1 mg l⁻¹ NAA, plantlets were regenerated. The plants thus obtained were confirmed to be hybrids through flow cytometry (FCM) and random amplified polymorphic DNA (RAPD) analyses. The hybrid obtained when P. filchnerae was used as the maternal parent was diploid, whereas hexaploid hybrid was obtained when using P. sinensis as the maternal parent. The hexaploid hybrid might be produced through chromosome doubling of a triploid originated from the fertilization of P. sinensis with unreduced pollen of P. filchnerae.     

In vitro propagation of Lychnis senno Siebold et Zucc., a rare plant with potential ornamental value

Lychnis senno is a rare and valued ornamental plant. Seed propagation is not efficient because of the low germination rate. To grow commercially L. senno in China, a protocol for in vitro germination and propagation of this species was developed. Various germination rates were obtained by treating seeds with GA₃ during 1–6 months storage period. The highest germination rate reached 19.4% when seeds were treated with 250 mg/l GA₃ and stored for 5 months at 4 °C. Axillary shoot proliferation was induced in the nodal segments of the seedlings on medium containing specific concentrations of BA and NAA [Murashige, T., Skoog, F., 1962. A revised medium for rapid growth and bioassays with tobacco tissue culture. Physiol. Plant 15, 473–497]. Maximum number of shoots was developed on a medium supplemented with 5 mg/l BA and 0.5 mg/l NAA, while the higher shoots were observed on a medium supplemented with 0.5 mg/l BA and 0.05 mg/l NAA. Rooting was induced in 91.7% of the regenerated explants on a half-strength MS medium supplemented with 0.5 mg/l NAA. The plantlets grew well and flowered after transfer to the greenhouse. The chromosome numbers of seedlings and propagated plants were also determined to be 2n = 2x = 24.     

Direct and callus-mediated regeneration of Curcuma soloensis Valeton (Zingiberaceae) and ex vitro performance of regenerated plants

Protocols are outlined for the regeneration of Curcuma soloensis, an attractive tropical ornamental plant, from young vegetative bud explants. We used both direct and callus-mediated regeneration techniques to produce material suitable for mass propagation and the development of transgenic plants. During direct plantlet propagation, the presence of thidiazuron (TDZ) in the growing medium induced more than three times as many shoots as 6-benzylaminopurine (BA), with a mean of 18.7 shoots per explant on MS medium containing 2.5 μM TDZ compared to 5.0 shoots with 40 μM BA. Subsequently, the shoots rooted readily on MS basal medium that was free of plant growth regulators. During indirect plantlet regeneration, TDZ combined with BA and 2,4-dichlorophenoxyacetic acid (2,4-D) had significant effects on embryogenic callus induction and multiplication. The frequency of callus formation was 91.1% for explants cultured on MS basal medium supplemented with 2.5 μM TDZ, 2.0 μM BA and 1.2 μM 2,4-D. On average 7.1 shoots were produced per callus mass cultured on MS medium supplemented with 2.5 μM TDZ, 9.0 μM BA and 1.2 μM naphthaleneacetic acid (NAA). Regenerated shoots were transferred to MS medium supplemented with 2.5 μM TDZ, to produce multiple shoots. In vitro cultured plantlets readily acclimatized to greenhouse conditions, showing 100% survival rates in a sphagnum, perlite and sand (1:1:1) medium. These plants were transplanted into pots or planted in the field. The ex vitro acclimated plants grew vigorously and produced showy inflorescences 5–6 months after planting. The high-frequency of shoot multiplication and rapid flowering of tissue-cultured plants indicate that C. soloensis has great potential in the floricultural market.     

Cryopreservation of carnation (Dianthus caryophyllus L.) shoot tips by encapsulation-vitrification

Shoot tips excised from in vitro cultured plants of Dianthus caryophyllus L. (cv. Pallas, cv. Pink Candy and cv. Wanessa) were successfully cryopreserved using an encapsulation-vitrification method. Shoot tips (2–3 mm in length) were encapsulated in sodium alginate, precultured on liquid Murashige and Skoog (1962) medium supplemented with various sucrose concentrations (0.25, 0.5, 0.75, 1.0 M) for 24 h or 48 h and dehydrated with the vitrification solution PVS2 (up to 4 h) at 24 °C or 0 °C prior to direct immersion in liquid nitrogen (−196 °C). A maximum of shoot regeneration from cryopreserved shoot tips was obtained with the following combinations: preculture in 0.5 M sucrose and 180 min dehydration treatment at 0 °C for cv. Pallas (60% shoot formation), or preculture in 0.75 M and 200 min dehydration at the same temperature for cv. Pink Candy (66.6% shoot formation) and cv. Wanessa (73% shoot formation).     

Improvement of caper (Capparis spinosa L.) propagation using in vitro culture and gamma irradiation

Some of the factors influencing the propagation of caper (Capparis spinosa L.) plants in vitro and germination of the seed were studied. The number of adventitious shoots emerging from caper stems cultured in vitro increased from 2.2 shoots per explant when the growth medium contained 2 mg/L of gibberellic acid (GA3) to 5.5 when the growth medium contained 2 mg/L zeatin riboside (ZR) and 1 mg/L naphthalene acetic acid (NAA). The best medium for callus formation from leaf and stem parts contained the growth regulators 1 mg/L 6-benzylaminopurine (BAP) and 0.1 mg/L NAA and the best medium for plant regeneration contained 1 mg/L kinetin and 0.1 mg/L indole-3-acetic acid (IAA). The effect of gamma irradiation on the growth of caper shoots in vitro was also studied. A 10 Gy dose of gamma irradiation stimulated growth of shoots up to 200% and increased shoot rooting percentage from 75 to 100%.