Supercritical fluid extraction of limonoid glucosides from grapefruit molasses

Limonoid glucosides (primarily limonin 17-beta-D-glucopyranoside, LG) were extracted from grapefruit molasses by supercritical fluid extraction using a supercritical carbon dioxide-ethanol (SC CO(2)-ethanol) system. Extraction conditions to maximize the yield of LG were determined by varying pressure, temperature, ethanol concentration, and extraction time. The highest yield of LG at 0.61 mg/g molasses was obtained at a pressure 48.3 MPa, a temperature of 50 degrees C, 10% ethanol (X(Eth) = 0.1), and 40 min of extraction time at a flow rate of 5.0 L/min. The results demonstrated that SC CO(2) extraction of limonoid glucosides from grapefruit molasses has practical significance for commercial production.     

Determination of semivolatile compounds in Baltic herring (Clupea harengus membras) by supercritical fluid extraction-supercritical fluid chromatography-gas chromatography-mass spectrometry

The on-line supercritical fluid extraction-supercritical fluid chromatography-gas chromatography method was applied to the determination of volatile compounds of raw and baked Baltic herring (Clupea harengus membras). The analytes were extracted with supercritical carbon dioxide at 45 degrees C and 10 MPa pressure. After extraction, the volatiles and coeluted lipids were separated on-line using supercritical fluid chromatography and the volatile fraction was introduced directly into a gas chromatograph. In all, 30 compounds were identified from fish samples with mass spectrometry. The most abundant compounds in the fresh Baltic herrings were heptadecane and 1-heptadecene. When the fish were stored for 3-6 days at 6 degrees C, the total peak area of the volatiles began to increase and the proportions of short chain acids (acetic, propanoic, 2-methylpropanoic, and 3-methylbutanoic) also increased. After 8-9 days of storage, 3-methylbutanoic acid comprised about 36 and 40% of all volatiles in raw and baked herring, respectively.     

Extraction of pharmaceutical components from Ginkgo biloba leaves using supercritical carbon dioxide

Ginkgo biloba extract (GBE) has many remarkable pharmacological and clinical effects, and it is the most frequently used product as a phytomedicine in many countries. The combination of primary extraction with 70% ethanol followed by extraction using supercritical carbon dioxide provides an efficient and economical means for obtaining flavonoids and terpenoids from Ginkgo biloba leaves. The supercritical fluid extraction (SFE) is affected by pressure, temperature, and the concentration of modifier in the extractant. At the most favorable experimental conditions of 300 MPa, 60 degrees C, and carbon dioxide containing 5% ethanol as modifier, the yield of GBE powder is 2.1% (based on the air-dry weight of Ginkgo biloba leaves) compared to a yield of only 1.8% by conventional solvent extraction. The contents of flavonoids and terpenoids in SFE products are 35.9% and 7.3%, respectively, which are significantly higher than the general standards of 24% and 6%, respectively.     

Isolation of tetra-acyl sucrose esters from turkish tobacco using supercritical fluid CO2 and comparison with conventional solvent extraction

Pure supercritical CO2 at various pressures and temperatures was used to effect the fractionation of tetra-acyl sucrose esters (SE) from dried, ground Turkish tobacco without any further pretreatment of the matrix. It was determined that SE cannot be extracted using low density CO2 (150 atm, 60 degrees C, and 0.62 gm/mL or 200 atm, 100 degrees C, and 0.49 gm/mL), whereas other analytes, which strongly interfere with the conventional solvent extraction of SE, can be easily removed under the same conditions. At the higher temperature (100 degrees C), these same analytes that interfere with the conventional solvent extraction of SE are even more readily removed, while the very poor extractability of SE is not affected. It was demonstrated, however, that SE can be removed from the pre-extracted tobacco with supercritical CO2 if the density is greater than (or equal to) 0.73 gm/mL. The supercritical fluid extraction method has been compared with other previous extraction methods that employ conventional solvents. This study provides one of the clearest examples of how the variable density property of a supercritical fluid can be utilized to effect the fractionation of a complex mixture.     

Supercritical CO(2) extraction of beta-carotene and lycopene from tomato paste waste

Lycopene and beta-carotene were extracted from tomato paste waste using supercritical carbon dioxide (SC-CO(2)). To optimize supercritical fluid extraction (SFE) results for the isolation of lycopene and beta-carotene, a factorial designed experiment was conducted. The factors assessed were the temperature of the extractor (35, 45, 55, and 65 degrees C), the pressure of the extraction fluid (200, 250, and 300 bar), addition of cosolvent (5, 10, and 15% ethanol), extraction time (1, 2, and 3 h), and CO(2) flow rate (2, 4, and 8 kg/h). The total amounts of lycopene and beta-carotene in the tomato paste waste, extracts, and residues were determined by HPLC. A maximum of 53.93% of lycopene was extracted by SC-CO(2) in 2 h (CO(2) flow rate = 4 kg/h) at 55 degrees C and 300 bar, with the addition of 5% ethanol as a cosolvent. Half of the initially present beta-carotene was extracted in 2 h (flow rate = 4 kg/h), at 65 degrees C and 300 bar, also with the addition of 5% ethanol.     

Supercritical fluid extraction of the pesticides carbosulfan and imidacloprid from process dust waste

Large amounts of contaminated process dust remain from the procedure of pesticide treatments applied to seed pellets. A pilot study in analytical-scale supercritical fluid extraction (SFE) was performed to determine the possibility of using supercritical carbon dioxide for the extraction of the nonpolar insecticide carbosulfan and the more polar insecticide imidacloprid present in contaminated dust waste, at concentrations of up to 20% (w/w). The effects of various experimental conditions, such as temperature, flow rate, and addition of modifier, on the recovery of the analytes were evaluated by extracting the pesticides both from spiked support material and from real dust samples. It was found that carbosulfan could easily be extracted from the dust waste within 30 min at 138 bar and 40 degrees C with a recovery of 98.9% (RSD = 2.3%, n = 10), compared to values obtained with a validated liquid extraction method. A sufficient removal of the more polar substance imidacloprid required the addition of a modifier, and the results showed a strong dependence of the extraction efficiency on the choice of modifier. Extractions at 276 bar and 80 degrees C with a solvent consisting of supercritical carbon dioxide modified with methanol (5%) gave a recovery of 97.0% (RSD = 3.6%, n = 10) using a 40 min extraction time. The results indicate that it seems to be possible to use process-scale SFE for the decontamination of pesticides from dust waste. The conditions outlined also permit analytical determinations of the two insecticides based on a combination of SFE and liquid chromatography.     

Supercritical fluid extraction and high-performance liquid chromatographic determination of phloroglucinols in St. John's Wort (Hypericum perforatum L.)

A small-scale supercritical fluid extraction (SFE) method was developed for the selective extraction of phloroglucinols from St. John's wort (SJW) leaf/flower mixtures using supercritical carbon dioxide (CO(2)). The extraction efficiency was investigated as influenced by pressure, temperature, time, and modifier. The optimized condition of SFE was carried out at 3.80 x 10(4) kpa (5500 psi) and 50 degrees C. Samples were held in static extraction for 10 min, followed by a dynamic extraction for 90 min at the flow rate of 1 mL/min. A simple and sensitive HPLC method was developed for the analysis of hyperforin and adhyperforin, the major phloroglucinols, in the SFE extract of SJW.     

Pressurized fluids for extraction of cedarwood oil from Juniperus virginianna

The extraction of cedarwood oil (CWO) using liquid carbon dioxide (LC-CO(2)) was investigated and compared to supercritical fluid extraction, including the effects of extraction pressure and length of extraction. The chemical composition of the extracts was monitored over the course of the extraction as well. The cumulative yields of CWO from cedarwood chips using 80 L of carbon dioxide varied very little treatment to treatment, with all temperature/pressure combinations yielding between 3.55 and 3.88% CWO, and the cumulative yields were statistically equivalent. The rate of extraction was highest under the supercritical extraction conditions (i.e., 100 degrees C and 6000 psi). Under the liquid CO(2) conditions (i.e., 25 degrees C), the extraction rates did not vary significantly with extraction pressure. However, there were differences in the chemical composition of the collected CWO. Extractions at 100 degrees C gave a much lower ratio of cedrol/cedrene than extractions at 25 degrees C. The highest ratio of cedrol/cedrene was obtained using 25 degrees C and 1500 psi. The use of subcritical water was also investigated for the extraction of CWO as well. Although some CWO was extracted using this method, the temperature/pressure combinations that gave the highest weight percentage yields also gave oils with an off odor while those combinations that gave a higher quality oil had very low yields. It appears that the high temperatures and acidic conditions cause a dehydration of the tertiary alcohol, cedrol, to its hydrocarbon analogue, cedrene, during CO(2) or pressurized water extractions of cedarwood.     

Optimization of a supercritical fluid extraction/reaction methodology for the analysis of castor oil using experimental design

The aim of this work was to optimize a supercritical fluid extraction (SFE)/enzymatic reaction process for the determination of the fatty acid composition of castor seeds. A lipase from Candida antarctica (Novozyme 435) was used to catalyze the methanolysis reaction in supercritical carbon dioxide (SC-CO(2)). A Box-Behnken statistical design was used to evaluate effects of various values of pressure (200-400 bar), temperature (40-80 degrees C), methanol concentration (1-5 vol %), and water concentration (0.02-0.18 vol %) on the yield of methylated castor oil. Response surfaces were plotted, and these together with results from some additional experiments produced optimal extraction/reaction conditions for SC-CO(2) at 300 bar and 80 degrees C, with 7 vol % methanol and 0.02 vol % water. These conditions were used for the determination of the castor oil content expressed as fatty acid methyl esters (FAMEs) in castor seeds. The results obtained were similar to those obtained using conventional methodology based on solvent extraction followed by chemical transmethylation. It was concluded that the methodology developed could be used for the determination of castor oil content as well as composition of individual FAMEs in castor seeds.     

Recovery of pigments from Origanum majorana L. by extraction with supercritical carbon dioxide

Extraction of pigments (chlorophylls and carotenoids) from marjoram (Origanum majorana L.) with supercritical carbon dioxide was investigated. The aim of this study was to map the effects of extraction pressure and temperature on the yield of coloring materials by applying a 3(2) full factorial design with three repeated tests in the center of the design. For comparison, laboratory and pilot plant Soxhlet extractions were carried out using ethanol and n-hexane solvents. The compositions of pigments in marjoram extracts were determined by HPLC. Similar amounts of carotenoids, in addition to 40% of chlorophylls and their derivatives, were recovered from the supercritical fluid extraction, in comparison to the ethanol Soxhlet extraction.     

Method of determination of nitrosamines in sausages by CO2 supercritical fluid extraction (SFE) and micellar electrokinetic chromatography (MEKC)

In this paper, the use of supercritical fluid extraction (SFE) and micellar electrokinetic capillary chromatography (MEKC) is proposed for the complete analysis of volatile nitrosamines in sausages. The extraction fluid used was CO2 and variables such as density, temperature of thimbles, extraction time, modifier, fluid flow, and kind of traps were investigated. Several experiments were carried out to obtain the most favorable conditions for analysis of volatile nitrosamines in sausages. The recoveries ranged from 21 to 82% for the five nitrosamines studied. The optimal condition of extraction was 0.2 g of sample fortified with 10 mg/kg, using dynamic extraction during 20 min and with adsorbent Florisil in the trap. The solvent selected for the elution of the analytes was methanol.     

Extraction of natural vitamin E from wheat germ by supercritical carbon dioxide

An efficient supercritical fluid extraction (SFE) process with carbon dioxide (SFE-CO(2)) was developed for the extraction of natural vitamin E (V(E)) from wheat germ. Both the pretreatment of extracted wheat germ and extraction conditions were optimized to ensure maximal V(E) yield. The extraction was undertaken at the extracting pressure of 4000-5000 psi, the extracting temperature of 40-45 degrees C, and the carbon dioxide flow rate of 2.0 mL/min for 90 min. An optimized pretreatment of wheat germ was usually necessary with a particle size of 30 mesh and a moisture content of 5.1%. A yield comparison of V(E) and its isomers extracted by supercritical CO(2) with those by conventional solvent extraction suggested that this SFE process was a practical process prospectively superior to conventional solvent extraction to prepare V(E) from wheat germ.     

超临界CO2萃取辣椒红色素的研究初探

简介了超临界CO₂流体的基本特性及国外将该流体应用于萃取分离技术的概况。报道了作者应用超临界CO₂从红辣椒中萃取红色素的研究情况。试验表明,色素和辣味素可以全部萃取出来,并可获得基本分离。     

Supercritical fluid extraction of lycopene from tomato processing byproducts

Tomato seeds and skins acquired from the byproduct of a local tomato processing facility were studied for supercritical fluid extraction (SFE) of phytochemicals. The extracts were analyzed for lycopene, beta-carotene, alpha-carotene, alpha-tocopherol, gamma-tocopherol, and delta-tocopherol content using high-performance liquid chromatography-electrochemical detection and compared to a chemically extracted control. SFEs were carried out using CO(2) at seven temperatures (32-86 degrees C) and six pressures (13.78-48.26 MPa). The effect of CO(2) flow rate and volume also was investigated. The results indicated that the percentage of lycopene extracted increased with elevated temperature and pressure until a maximum recovery of 38.8% was reached at 86 degrees C and 34.47 MPa, after which the amount of lycopene extracted decreased. Conditions for the optimum extraction of lycopene from 3 g of raw material were determined to be 86 degrees C, 34.47 MPa, and 500 mL of CO(2) at a flow rate of 2.5 mL/min. These conditions resulted in the extraction of 61.0% of the lycopene (7.19 microg lycopene/g).     

Effects of supercritical carbon dioxide (SC-CO(2)) oil extraction on the cell wall composition of almond fruits.

Extraction of oil from almond fruits using supercritical carbon dioxide (SC-CO(2)) was carried out at 50 degrees C and 330 bar on three sets of almonds: raw almond seeds, raw almond kernels, and toasted almond seeds. Three different oil extraction percentages were applied on each set ranging from approximately 15 to 16%, from approximately 27 to 33%, and from approximately 49 to 64%. Although no major changes were detected in the fatty acid composition between fresh and partially defatted samples, carbohydrate analysis of partially defatted materials revealed important changes in cell wall polysaccharides from almond tissues. Thus, at low extraction percentages (up to approximately 33%), pectic polysaccharides and hemicellulosic xyloglucans were the main type of polymers affected, suggesting the modification of the cell wall matrix, although without breakage of the walls. Then, as supercritical fluid extraction (SCFE) continues and higher extraction rates are achieved (up to approximately 64%), a major disruption of the cell wall occurred as indicated by the losses of all major types of cell wall polysaccharides, including cellulose. These results suggest that, under the conditions used for oil extraction using SC-CO(2), fatty acid chains are able to exit the cells through nonbroken walls; the modification of the pectin-hemicellulose network might have increased the porosity of the wall. However, as high pressure is being applied, there is a progressive breakage of the cell walls allowing the free transfer of the fatty acid chains from inside the cells. These findings might contribute to providing the basis for the optimization of SCFE procedures based on plant food sources.     

Liquid chromatography-mass spectrometry of cis- and all-trans-lycopene in human serum and prostate tissue after dietary supplementation with tomato sauce

Several epidemiological studies suggest a lower incidence of prostate cancer in men who routinely consume tomato products. Tomatoes are the primary dietary source of lycopene, which is among the most potent antioxidants of the carotenoids. Men with clinical stage T1 or T2 prostate adenocarcinoma were recruited (n = 32) and consumed tomato sauce based pasta dishes for 3 weeks (equivalent to 30 mg of lycopene per day) before radical prostectomy. Prostate tissue from needle biopsy just before intervention and prostectomy after supplementation from a subset of 11 subjects was evaluated for both total lycopene and lycopene geometrical isomer ratios. A gradient HPLC system using a C(18) column with UV-vis absorbance detection was used to measure total lycopene. Because the absorbance detector was insufficiently sensitive, HPLC with a C(30) column and positive ion atmospheric pressure chemical ionization mass spectrometric (LC-MS) detection was developed as a new assay to measure the ratio of lycopene cis/trans isomers in these samples. The limit of detection of the LC-MS method was determined to be 0.93 pmol of lycopene on-column, and a linear response was obtained over 3 orders of magnitude. Total lycopene in serum increased 2.0-fold from 35.6 to 69.9 microg/dL (from 0.664 to 1.30 microM) as a result of dietary supplementation with tomato sauce, whereas total lycopene in prostate tissue increased 3.0-fold from 0.196 to 0.582 ng/mg of tissue (from 0.365 to 1.09 pmol/mg). all-trans-Lycopene and at least 14 cis-isomer peaks were detected in prostate tissue and serum. The mean proportion of all-trans-lycopene in prostate tissue was approximately 12.4% of total lycopene before supplementation but increased to 22.7% after dietary intervention with tomato sauce. In serum there was only a 2.8% but statistically significant increase in the proportion of all-trans-lycopene after intervention. These results indicate that short-term supplementation with tomato sauce containing primarily all-trans-lycopene (83% of total lycopene) results in substantial increases in total lycopene in serum and prostate and a substantial increase in all-trans-lycopene in prostate but relatively less in serum.     

Countercurrent supercritical fluid extraction and fractionation of high-added-value compounds from a hexane extract of olive leaves

Countercurrent supercritical fluid extraction (CC-SFE) at a pilot scale plant was used for fractionation of high-added-value products from a raw extract of olive leaves in hexane. Compounds found in the raw extract were waxes, hydrocarbons, squalene, beta-carotene, triglycerides, alpha-tocopherol, beta-sitosterol, and alcohols. The CC-SFE extraction process was investigated according to a 2(3) full factorial experimental design using the following variables and ranges: extraction pressure, 75-200 bar; extraction temperature, 35-50 degrees C; and ethanol as modifier, 0-10%. Data were analyzed in terms of extraction yield, enrichment, recovery, and selectivity. Higher extraction yields were attained at 200 bar. For most of the compounds analyzed enrichment was attained at the same conditions, that is, 75 bar, 35 degrees C, and 10% ethanol. Hydrocarbons were usually recovered in the separators, whereas waxes and alpha-tocopherol remain in the raffinate. Selectivity data reveal that alpha-tocopherol is the most easily separable compound. The influence of the experimental factors on the recovery of all the compounds was studied by means of regression models. The best fitted model was attained for beta-sitosterol, with R2 = 99.25%.     

Comparison of extraction methods for marker compounds in the essential oil of lemon grass by GC

A gas chromatography flame ionization detection method for the quantification of bioactive marker compounds (neral, geranial, geraniol, limonene, citronellal, and beta-myrcene) in the essential oil of Cymbopogon citratus (lemon grass) was developed. Four procedures for the extraction of essential oils from C. citratus were compared including solvent extraction, steam distillation extraction, accelerated solvent extraction, and supercritical fluid extraction. Solvent extraction by sonication with nonpolar solvents showed comparable results to the steam distillation method. Several commercial products prepared from C. citratus and Cymbopogon flexuosus were analyzed and compared.     

Determination of the fluoroquinolone enrofloxacin in edible chicken muscle by supercritical fluid extraction and liquid chromatography with fluorescence detection

A supercritical fluid extraction (SFE) method for the extraction of enrofloxacin from a chicken breast muscle was examined. A liquid chromatograph, equipped with a fluorescence detector, was used for the detection of enrofloxacin. Optimal extraction parameters, such as extraction time, supercritical fluid volume, modifier concentration, pressure, and temperature, were determined by examining SFE recoveries from control muscle samples spiked with enrofloxacin at different levels. In all of the experiments, high recovery values were observed, ranging from 101 to 104%. The extraction of enrofloxacin from real muscle samples was examined in chickens that were treated orally with enrofloxacin. Extraction was carried out by the SFE method after each oral treatment and under optimal extraction conditions at set intervals over time. The SFE, combined with liquid chromatographic analysis, showed that the concentration of enrofloxacin in the chicken muscles decreased continuously with time, giving a negligible concentration 72 h after the treatment. These results suggest that SFE is a useful approach for the extraction of enrofloxacin from chicken breast muscles.     

Effect of variety and maturation of cheese on supercritical fluid extraction efficiency

Supercritical fluid extraction (SFE) has been utilized by the food industry in many applications to extract, fractionate, and recover compounds from various food matrices. However, little research has been conducted using SFE as an alternative process for producing reduced-fat cheese. Lipids in cheeses may be selectively extracted due to the nonpolar properties of supercritical carbon dioxide (SC-CO2), without leaving residual chemicals as is the case in solvent extraction. The objective of this study was to evaluate the influence on the extraction process due to cheese variety and protein breakdown by age. A Latin square design was utilized to test the extractability of lipids from Parmesan and Cheddar cheeses, aged young (9-10 months) or old (24 months). Extraction took place in a 500 mL SFE vessel using 100 g of grated cheese samples. The SFE parameters of the extraction were 350 bar, 35 degrees C, and supercritical carbon dioxide at a flow rate of 20 g/min for 55 min. Compositional analysis measured all treated samples and controls of total lipids, lipid profiling, total protein, protein/peptide analysis, moisture, ash, and pH. Cheese type was a major variable in fat extraction. The extraction in Cheddar showed an average fat reduction of 53.56% for young cheese, whereas that in old Cheddar was 47.90%. However, young Parmesan was reduced an average of 55.07%, but old Parmesan was reduced at 68.11%, measured on a dry basis. SFE extracted triglycerides and cholesterol, but did not remove phospholipids. This investigation introduces the observations of the effect of Cheddar and Parmesan varieties on SFE, offering data on the important parameters to consider in the design of SFE processes to reduce fat in cheese.