Synthesis of non-water soluble polymeric guanidine derivatives and application in preparation of antimicrobial regenerated cellulose

In order to prepare antimicrobial regenerated cellulose fibers from blended spinning solutions, three non-water soluble polymeric guanidine derivatives, polyhexamethylene guanidine dodecyl benzene sulfonate (PHGDBS), polyhexamethylene guanidine dodecyl sulfate (PHGDSA), and polyhexamethylene guanidine laurylsulfonate (PHGLSO) were synthesized. And the chemical structure of these agents was verified by element analysis, Fourier transform infrared spectroscopy (FTIR), and proton nuclear magnetic resonance (¹H-NMR). The antimicrobial activity of the three agents as well as cellulose films containing PHGDBS was also studied. The results showed that the compounds we prepared had strong properties against both bacterial and fungus, including Staphylococcus aureus (S. aureus), Escherichia coli (E. coli), Candida albicans, and Aspergillus niger. Moreover, it was found that three antimicrobial agents were insoluble in water but they can dissolve in solvents of cellulose such as 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) and N-methylmorpholine-N-oxide monohydrate (NMMO·H₂O). Meanwhile, it was also proved that [BMIM]Cl had little effect on the antimicrobial properties of these agents. The cellulose films containing only 1.0 wt% PHGDBS showed 99.94 % and 96.95 % bacterial reduction rates for S. aureus and E. coli, respectively. Moreover, still over 91 % of bacterial reduction was maintained after 15 laundering cycles. It suggests that the three agents will be suitable to prepare antimicrobial regenerated cellulose fibers or films.     

Designing double-layered nanofibrous membranes as a wound dressing material

New generation wound dressings require the criteria that both bioactive and conventional wound dressing materials can recompense the fundamental properties like defense of wound from microbial invasion, dehydration during the wound care duration and mimic the healing process. In this study, functional double-layered nanofibrous composite membranes were fabricated via electrospinning method. The matrices consist of a sheet of ampicillin loaded poly(2-hydroxylethyl methacrylate/polyacrylic acid (pHEMA/pAA) nanofibers on the upper side (first layer: pH sensitive antibacterial barrier) and a sheet of poly(ε-caprolactone) (PCL)/gelatin nanofibers (second layer: bioactive part). Ampicillin was successfully incorporated to double-layered matrices which greatly changed the mechanical properties, biodegradability and water uptake ratios (up to 4 fold higher values). The success of the antimicrobial activity of ampicillin on Staphylococcus aureus and Escherichia coli was indicated by the inhibition zone test. pH sensitivity was confirmed by the swelling and ampicillin release studies by shifting pH value to basic environment. Thus, double-layered pHEMA-pAA nanofibers suggest as a potential wound dressing material for its pH sensitive drug delivery ability and its bioactive part.     

Antibacterial Bilayered Skin Patches Made of HPMA and Quaternary Poly(4-vinyl pyridine)

This study aimed to produce poly(4-vinyl pyridine) and hydroxypropyl methacrylamide (HPMA)-based bilayer wound dressings materials enhancing healing mechanism for the wounds which have self-healing problem and high infection risk. These materials were designed to protect wound from secondary traumas caused microorganism invasion and do not have toxic substance release problem. Synthesis of quaternary poly(4-vinyl pyridine) (poly(Q4-VP)) which is the antibacterial layer of wound dressing material was carried out in two stages. At first stage, poly(4-vinyl pyridine) polymer was synthesized from 4-vinyl pyridine monomer by free radical polymerization. Then, poly(Q4-VP) was synthesized from poly(4-VP) by alkylation reaction with 6-bromocaproic acid. Resulted polymer was structurally characterized by FT-IR. The macroporous spongy structure, as the lower layer of wound dressing material, was prepared by cryogelation of HPMA. Then, the antibacterial polymer was electrospun onto the cryogel structure and bilayered material was obtained. Cryogel structure, fiber morphology and layer integration was examined by SEM. In order to enhance wound healing process, ascorbic acid (vitamin C) was loaded to cryogel layer and release was followed by spectrophotometrically. The antimicrobial properties of the materials were examined against Escherichia coli, Staphylococcus aureus and Candida albicans, respectively. According to the results, bilayered, antibacterial and antifungal against Staphylococcus aureus and Candida albicans, temporary wound dressings which can stimulate wound healing and have high swelling capacity were obtained successfully.     

Preparation and characterization of cellulose nanofiltration membrane through hydrolysis followed by carboxymethylation

Bamboo cellulose (BC) is hydrophilic, biodegradable and inexhaustible. The bamboo cellulose membrane (BCM) is one of the best materials to replace petroleum-based polymer film for water purification. In this study, the N-methylmorpholine-N-oxide (NMMO) was used as a solvent to dissolve cellulose 6 wt.%, and regenerated cellulose membrane was prepared by phase inversion. A new kind of cellulose nanofiltration membrane (BC-NFM) was obtained by the hydrolysis and carboxymethylation of dense cellulose membrane (BCM). The modification was carried out through hydrolysis followed by carboxymethylation. The BC-NFM was characterized by XRD, FT-IR, SEM and thermal analysis. BC-NFM performance evaluation instrument were used to evaluate retention rate and water flux of nanofiltration membrane. BCM was immersed in 1 mol/l NaOH and 3 wt/v.% chloroacetic acid solution to obtain BC-NFM. By calculating, pore size of nanofiltration membrane was 0.63 nm. With a pressure of 0.5 MPa, the water flux of nanofiltration membrane for Na₂SO₄ solution was 10.32 l/m²h, and the retention rate was 68.4 %. The water flux for NaCl solution was 13.12 l/m²h, and the retention rate was 34.9 %. And the retention rates were 93.0 % and 98.9 % for methyl orange and methyl blue, respectively. The stability of the nanofiltration membrane was measured by the thermal analyzer, following the order of BC>BCM>BC-NFM. The prepared cellulose nanofiltration membrane exhibited good stability in water treatment process, and can be used to remove organic compounds in aqueous solutions.     

Antimicrobial and cellular activity of poly(L-lactide)/chitosan/Imipenem antibiotic composite nanofibers

Synthesis of biocompatible polymer nanofibers is valuable, due to their use as a cover for burns and as a replacement for bandage because of their antimicrobial properties. In this study, electrospinning of chitosan(Ch) and nanofibers synthesis with antibacterial properties was investigated. Nanofibers with antibacterial properties were synthesized by electrospun of Ch/poly(L-lactide)(PLA)/Imipenem(Imi) polymer solution. The results showed that the optimized ratio of Ch/PLA polymer solution was ratio of 50:50 and Ch 2 wt% and PLA 10 wt% polymer solution was the best weight percentage for nanofiber preparation. Also, the average diameter of Ch/PLA/Imi nanofibers was 143 nm and measured with ImageJ software. Afterwards, the antibacterial properties of Imi as additives (with different percentages) was studied in the polymer solution. The scanning electron microscopy (SEM) images and antibacterial tests were showed that the electrospun of Ch/PLA/Imi polymeric nanofibers were effective against Gram negative bacteria Escherichia coli (E. coli) and inhibited growth of E. coli. The growth and viability percentage of fibroblast cells with nanofibers in αMEM culture are at desirable levels after 6 days.     

Preparation and Properties of Poly(lactic Acid)/PLA-<Emphasis Type="Italic">g</Emphasis>-ABS Blends

PLA/PLA-g-ABS blends were prepared and evaluated for mechanical properties performance. Firstly, carboxylic acid functionalized ABS particles were synthesized by grafting polymethacrylic acid (PMAA) onto ABS particle surface using potassium persulfate as an initiator. The reaction was followed by FTIR analysis. The resultant carboxylated ABS was melt mixed with virgin PLA in an internal mixer to obtain PLA/PLA-g-ABS blends. The obtained PLA/PLA-g-ABS blends were subject to injection molding to obtain specimens for testing evaluation. It was found that impact resistance values significantly outperformed neat PLA by 60 %, 87 %, and 150 % for PLA/PLA-g-ABS 10 wt%, PLA/PLA-g-ABS 20 wt%, and PLA/PLA-g-ABS 30 wt%, respectively. A significant increase in impact strength was contributable to ABS rubber which exhibited even dispersion and good interfacial adhesion. The impact strength was dependent on the percent loading of PLAg-ABS; the more the PLA/PLA-g-ABS the higher the impact strength value. In a similar manner, tensile strength increases when loaded with PLA/PLA-g-ABS albeit at lesser effect. Considering the percent elongation, a massive increase in percent elongation was recorded in case of PLA/PLA-g-ABS 20 wt% and PLA/PLA-g-ABS 30 wt%, implying that these blends were extremely flexible and tough when compared to neat PLA, control, and PLA/PLA-g-ABS 10 wt%.     

Preparation and Properties of Nylon 4/6 Copolymer Nanofibers Containing Silver-Zeolite Nanoparticles

Nylon 4/6 copolymer has desirable properties, such as high affinity to water and good tensile strength. These properties originate from the characteristics of nylon 4 and nylon 6. Zeolite is a good adsorptive material that has many pores in its structure and the ability to capture metallic ions. As a multifunctional additive, silver-ion-loaded zeolite nanoparticles were used to increase the moisture regain and impart antimicrobial properties to the nylon 4/6 copolymer. A nylon 4/6 nanofiber web was prepared by electrospinning from a polymer solution containing silver zeolite nanoparticles. The moisture regain of the nylon 4/6 nanofiber web increased with increasing amount of silver zeolite added. The web showed excellent antimicrobial activity against Klebsiella pneumoniae and Staphylococcus aureus. Overall, the nylon 4/6 nanofiber web could be a good material for wound healing dressings and high functional medical filters.     

Treatment of Cotton by β-Cyclodextrin/Triclosan Inclusion Complex and Factors Affecting Antimicrobial Properties

The efficacy of antimicrobial treatment of cotton fabrics depends on various parameters of the coating process, such as the chemical nature and concentration of the antimicrobial agent, the composition of the crosslinking formulation, and the curing temperature. The inclusion complex of triclosan with β-cyclodextrin (βCD) was synthesized and characterized by FTIR, XRD, NMR, Raman, SEM, and TGA. The minimum inhibitory concentration and minimum bactericidal concentration of the complex against Klebsiella pneumoniae and Staphylococcus aureus were compared to those of its precursor. A multifactorial study included an evaluation of the effects of triclosan complexation with β-cyclodextrin, a comparison between the glyoxal and tetracarboxylic acid as crosslinkers, an investigation of the effect of crosslinker and catalyst concentrations, and a comparison of curing at 120°C and 180°C. The cotton was characterized by FTIR-ATR, the micrographs of treated samples were obtained by SEM and the weight add-on was calculated. The bactericidal properties were determined according to AATCC-147. The correlation between the coating process parameters and the antimicrobial efficacy was determined. The optimal combination leading to the highest weight add-on and the antimicrobial coating that was most durable to multiple detergent washes at an elevated temperature was the use of complexed triclosan grafted onto the cotton in the presence of tetracarboxylic acid, followed by curing at 180°C. The curing temperatures were 120°C (P=0.002) and 180°C (P=0.008), catalysts were 1 % and 2 % aluminium sulfate and sodium hypophosphite (P<0.001), and the crosslinkers were 5 % and 10 % glyoxal and butanetetracarboxylic acid (P<0.001); these parameters significantly enhanced the antimicrobial properties of the treated fabrics. The study showed that βCD did not have antimicrobial activity, while the βCD/triclosan-treated textile exhibited potential antimicrobial properties. Overall, the bactericidal activity of fabrics can be enhanced by using βCD/triclosan with 10 % butanetetracarboxylic acid as a cross-linker and 5 % sodium hypophosphite as a catalyst at a curing temperature of 180°C.     

Spherical Bacterial Cellulose/TiO<Subscript>2</Subscript> Nanocomposite with Potential Application in Contaminants Removal from Wastewater by Photocatalysis

Contaminants are often found in aquatic environments, for instance, heavy metals, dyes, parasites, pesticides, hormones and pharmaceuticals. Therefore, large amounts of these contaminants reaches wastewater via industrial and domestic effluents, causing major concern to human health. Heterogeneous photocatalysis is a technique for removing these contaminants in order to achieve better efficiency in water treatment. Then, bacterial cellulose (BC) produced in an agitated culture can form spherical bodies composed of nanofibers with high specific surface area. Moreover, Titanium dioxide (TiO₂) is a semiconductor containing high photocatalytic activity capacity. Thus, the main objective in this work was to produce spherical BC/TiO₂ nanocomposites for contaminants removal from wastewater by photocatalysis process. The incorporation of TiO₂ nanoparticles in the spherical BC matrix was performed by ex situ and in situ methods. In addition, Scanning Electron Microscope (SEM), Energy Dispersive Spectroscopy (EDS), Fourier Transform Infrared Spectroscopy (FTIR) and Thermogravimetric Analysis (TGA) were used as tools of morphological, chemical and thermal characterizations of the nanocomposites. Besides, photocatalysis tests were performed in order to evaluate the removal efficiency of methylene blue from aqueous solutions. The results of these tests exhibited a percentage of methylene blue removal of 70.83 and 89.58 % after 35 minutes for spherical BC/TiO₂ nanocomposites both, in situ and ex situ, respectively. Therefore, these results demonstrated that BC/TiO₂ to be a low cost material with high capacity of contaminants removing and a great potential for industrial applications.     

Solution blowing of chitosan/PLA/PEG hydrogel nanofibers for wound dressing

In this study, a kind of hydrogel nanofibers were successfully fabricated via solution blowing of chitosan (CS) and polylactic acid (PLA) solutions mixed with various contents of polyethylene glycol (PEG) to offer hydration. The nanofibers with PEG content varying were average 341-376 nm in diameter with smooth surface and distributed randomly forming three-dimension (3D) mats. Glutaraldehyde (GA) vapor was then applied to impart stability, and the cross-linking reaction mainly occurred between GA and hydroxyl groups which was confirmed by XPS. The hydrogel nanofibers showed quick absorption behavior, high equilibrate water absorption and good air permeability which could help the mats absorbing excess exudates, creating a moist wound healing environment and oxygen exchanging in wound healing. The mats also exhibited good antibacterial activities against E. coil. The combination advantages of nanofibers mats and hydrogel will help it find promising application in wound healing.     

Prevalence of the pathogenic chytrid fungus, Batrachochytrium dendrobatidis, in an endangered population of northern leopard frogs, Rana pipiens

Background

Emerging infectious diseases threaten naïve host populations with extinction. Chytridiomycosis, an emerging infectious disease of amphibians, is caused by the pathogenic fungus Batrachochytrium dendrobatidis (Bd) and has been linked to global declines in amphibians.

Results

We monitored the prevalence of Bd for four years in the Northern leopard frog, Rana pipiens, which is critically imperiled in British Columbia (BC), Canada. The prevalence of Bd initially increased and then remained constant over the last three years of the study. Young of the year emerging from breeding ponds in summer were rarely infected with Bd. Some individuals cleared their Bd infections and the return rate between infected and uninfected individuals was not significantly different.

Conclusions

The BC population of R. pipiens appears to have evolved a level of resistance that allows it to co-exist with Bd. However, this small population of R. pipiens remains vulnerable to extinction.

     

Characterization of the surface properties of cellulosic fibers in fibrous and ground forms by IGC and contact angle measurements

Surface properties of fibrous and ground cotton and linen were investigated by inverse gas chromatography (IGC) and the contact angle with different liquids was also measured on fabrics composed of both fibers. Results proved that dispersion component of surface tension (γ _s ^d ) determined by IGC depends not only on the surface energy, but also on several factors influencing the adsorbability of probe molecules on the cellulosic substrates. For cotton samples, the trapping of n-alkanes among waxy molecules in the outer layer of fibers can be presumed. This effect results in larger γ _s ^d for cotton fibers than for linen in spite of the higher wettability of the linen fabrics. Besides the surface energy and trapping effects, the grinding also influences the γ _s ^d values. Specific enthalpy of adsorption (ΔH _A ^ab ) of polar probes could be determined on all linen samples, but only on the ground cotton sample. Lewis acid-base character calculated for linen and ground cotton samples depends on the same effects as the γ _s ^d does. The similar ΔH _A ^ab values of chloroform (acidic) and THF (basic) measured on each of the samples support the conclusion that the surface character is amphoteric, which is also proved by the high ΔH _A ^ab values of the amphoteric ethyl acetate and acetone probes.     

Preparation of Durable Antibacterial Cellulose with AgCl Nanoparticles

In this study, a facile method was developed to coat AgCl nanoparticles (NPs) onto knitted cotton fabrics. The AgCl NPs were characterized by ultraviolet absorption spectrum, X-ray diffraction (XRD) and dynamic laser light scattering (DLS). The AgCl NPs were coated onto cotton fabrics through a pad-dry-cure process with the assistance of 1,2,3,4- butanetetracarboxylic acid (BTCA). Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), ICP-OES analysis and energy-dispersive X-ray spectroscopy (EDX) confirmed that AgCl NPs were successfully coated onto cotton fabrics. The prepared cotton samples exhibited excellent antimicrobial activity against both Gram-positive S. aureus and Gram-negative K. pneumonia bacteria. Rat skin fibroblast cytotoxicity testing demonstrated the treated cotton fabrics to be non-toxic. The washing durability evaluation showed that the antimicrobial function of cotton fabrics was durable to washing. In addition, the wrinkle resistance of the coated cotton fabrics was improved and there was no obvious change in whiteness.     

Antibacterial cotton fabric with enhanced durability prepared using L-cysteine and silver nanoparticles

L-cysteine (Cys) and silver nanoparticles (Ag NPs) were successfully linked onto the cotton fabric surfaces. The Cys molecules were covalently linked to the cotton fibers via esterification with the cellulose hydroxyl groups, and the Ag NPs tightly adhered to the fiber surface via coordination bonds with the Cys thiol groups. As a result, the Ag NPs coating on the cotton fabric showed an excellent antibacterial function with an outstanding laundering durability. The bacterial reduction rates (BR) efficiency reached 100 % for Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). After 50 consecutive laundering cycles, the bacterial reduction rates (BR) against E. coli and S. aureus were maintained over 97 %. It has potential applications in a wide variety of fields such as sportswear, socks, and medical textile.     

Wireworm and Flea Beetle IPM in Potatoes in Canada: Implications for Managing Emergent Problems in Europe

Three species of wireworms (Coleoptera: Elateridae) known to cause severe damage to potatoes in Europe and Asia have been introduced to Canada and are now well established as pests in the westernmost province of British Columbia (BC) (Agriotes obscurus and A. lineatus) and the eastern provinces of Nova Scotia and Prince Edward Island (A. obscurus, A. lineatus and A. sputator). Conventional insecticide-based efforts to control these invasive pests have had serious environmental impacts, or are failing to prevent severe economic damage from occurring to potatoes in some key potato production areas. Research toward developing an IPM programme for these exotic species has been completed or is underway in Canada, including the following: biological and ecological studies, development of monitoring and risk assessment programmes, and development of insecticidal and alternative control strategies. This research is summarized and implications for wireworm management in Europe are discussed. In addition to wireworms, one of the primary economic insect pests of potatoes in BC is the tuber flea beetle, Epitrix tuberis (Coleoptera: Chrysomelidae). The larvae of this beetle feed on developing or mature daughter tubers, producing surface channels or tracks and holes directly into the tuber. In the past, growers would apply 7–10 foliar sprays of broad-spectrum insecticides per growing season, which was not always successful in controlling this pest. In the EU, a newly identified flea beetle, Epitrix papa sp. n., as well as the North American species, E. cucumeris, have been identified as attacking potatoes initially in Portugal (2004) and later also in Spain. The potential spread of these emergent pests to various EU and non-EU countries is of concern, and if established would require the development of management strategies. The former development of a highly effective IPM programme developed in BC for E. tuberis is discussed, as is its potential for E. papa and E. cucumeris management in Europe.     

Controlling the Properties of OPEFB/PLA Polymer Composite by Using Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> for Microwave Applications

Microwave-absorptive polymer composite materials provide protection against interference to communication systems caused by microwave-inducing devices. Microwave-absorptive polymer composites were prepared from polylactic acid (PLA) biocomposite blended with oil palm empty fruit bunch (OPEFB) fiber and commercial Iron oxide (Fe₂O₃) as filler using the melt-blending method. The composites characterization was carried out using the scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses. The coefficient of reflection S₁₁ and coefficient of transmission S₂₁ of the composites for various Fe₂O₃ filler percentages were determined using a rectangular waveguide in connection with microwave vector network analyser (HP/Agilent model PNA N5227). These coefficients were then used to calculate microwave-absorption properties (in decibels). XRD analysis showed that increasing amounts of reinforced material (Fe₂O₃) reduces the crystallinity of the composites. SEM data indicated that Fe₂O₃ filler ratio increased in the composites, and adhesion to the cellulose fiber grew gradually until the highest percentage of filler was added. The complex relative permittivity and relative permeability were obtained within the broad frequency range of 8–12 GHz at room temperature for various percentages of filler and were measured by the transmission/reflection method using a vector network analyser. Fe₂O₃ embedment in OPEFB/PLA was observed to have resulted in enhancing the dielectric and magnetic properties. The values of permittivity and permeability increased with increasing Fe₂O₃ filler content. Theoretical simulation studied the relation between ε′ and ε″ of the relative complex permittivity in terms of Cole-Cole dispersion law. The result indicated that the processes of Debye relaxation in Fe₂O₃/OPEFB/PLA, the unique dielectric characteristics of Fe₂O₃ cannot be accounted for by both the Debye dipolar relaxation and natural resonance. Results further showed that the material transmission, reflection, and absorption properties could be controlled by changing the percentage of Fe₂O₃ filler in the composites.     

Preparation of Porous <Emphasis Type="Italic">m</Emphasis>-aramid/cellulose Blend Membranes with High Moisture and Air Permeability by an Enzymatic Degradation Method

Enzyme degradation method was adopted to prepare porous m-aramid/cellulose blend membranes with high air permeability, water absorbency and moisture permeability. This facile preparation process started by casting a blend membrane from a DMAc/LiCl solution containing m-aramid and cellulose. An enzyme was then used to degrade the cellulose in the blend membrane, resulting in porous structures. Five enzymes including cellulase, chitosanase, papain, lipase, and glucose oxidase, were evaluated and cellulase was found to be optimal. Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) were used to characterize the miscibility and the morphology of the m-aramid/cellulose blend membranes before and after degradation, respectively. The thermal stability of the blend membranes were characterized by thermogravimetric analysis (TGA). The properties including air permeability, water absorbency and moisture permeability of the m-aramid/cellulose blend membranes greatly improved after degradation as compared to those of the pure m-aramid. This paper provided a new approach to preparing novel textile materials with high comfortability.     

Fabrication of silver nanoparticle/polyvinyl alcohol/polycaprolactone hybrid nanofibers nonwovens by two-nozzle electrospinning for wound dressing

In this study, two biodegradable polymers, polycaprolactone (PCL) and polyvinyl alcohol (PVA) were used to fabricate nanofiber nonwovens (NFNs). Also, the silver nanoparticles (AgNPs) successfully reduced by using tea polyphenols (TP) and incorporated in the NFNs via electrospinning. The morphologies of the NFNs and AgNPs were analyzed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), respectively. The PCL nanofibers and PVA nanofibers interweaved each other, and AgNPs with average diameter 1.53±0.15 nm were embedded in the PVA nanofibers. The properties of electrospun NFNs were characterized by pore property, swelling/weight loss, water contact angle, mechanical property, and antibacterial activity. The nanofibers cross-linked to each other forming the 3Dnetwork porous structure with diameter about 1-1.5 μm. Although the hydrophobic PCL was added in the hybrid NFNs, the NFNs still showed hydrophilic propriety, high swelling degree (i.e. swelling degree is 330 % for 48 h), and low weight loss (i.e. weight loss is 22.4 % for 48 h). Also, the hybrid PCL/PVA/AgNPs NFNs exhibited a suitable mechanical property for wound dressings (i.e. tensile strength is 4.27 MPa, and breaking elongation is 88 %). Moreover, the hybrid NFNs effectively inhibited growth of Escherichia coli and Staphylococcus aureus. In summary, this PCL/PVA/AgNPs NFNs may provide a promising candidate for accelerating wound healing.     

Eco friendly natural dyes from <Emphasis Type="Italic">Syzygium cumini (L)</Emphasis> (Jambolan) fruit seed endosperm and to preparation of antimicrobial fabric and their washing properties

The present study has been focused on the extraction of natural dyes from Syzygium cumini (L.) Jambolan fruit dry seed endosperm and investigation of their phytochemicals and pharmacological characteristics. Dyes were prepared using aqueous, acidic, alcoholic and alkaline extraction techniques. UV spectral studies of the dyes showed a variation in absorption maxima and their color varied with respect to the pH and the solvent used during extraction. The dye was prepared from Jambolan fruit dry seed endosperm showed good antibacterial activity. The aqueous extraction of Jambolan fruit dry seed endosperm was able to inhibit the growth of many bacterial strains viz S. lutea, E.coli, P. aeruginosa, Pseudomonas fluorescens and S. aureus etc. The antimicrobial property of the dyes was used in developing antimicrobial fabric.