共查询到20条相似文献,搜索用时 218 毫秒
1.
加铬砷酸铜(CCA)作为木材防腐剂在世界范围内已经广泛使用了70余年,目前在我国其仍然是主要的木材防腐剂之一.然而.CCA 中有效成分铬和砷的氧化物所具有的剧毒性,使其在使用过程中流失到外界后会对环境及生物安全造成威胁,而防腐剂中有效成分的流失在很大程度上是由于防腐处理材在使用前防腐剂的有效成分与木材成分之间的固着反应不充分而造成的.对CCA中有效成分在处理材中的固着反应过程、监测方法及反应场所等做了详细介绍,旨在为水基木材防腐剂有效成分在处理材中的固着、流失研究提供借鉴,并为CCA防腐处理材的生产提供理论指导. 相似文献
2.
3.
4.
水载型木材防腐剂中有效成分固着的影响因素 总被引:1,自引:0,他引:1
水载型木材防腐剂在木材防腐市场中占据着主导地位,然而其中的有效成分的抗水流失性差是其存在的主要缺点,这在很大程度上是由于防腐处理材在使用前防腐剂有效成分与木材成分之间的固着反应不充分而造成的,因此提高防腐有效成分在处理材中的固着质量是提高抗流失性的关键.笔者对国内外在水载型防腐剂中有效成分固着方面的研究进行了较为系统、全面的介绍,其中包括木材树种、固着的环境温度与相对湿度、固着时间、木材含水率、防腐剂的保持量、防腐剂成分组成等不同因素的影响,并在此基础上提出了今后的研究方向. 相似文献
5.
新型木材防腐剂的研究 总被引:2,自引:0,他引:2
本研究通过对国内外现有木材防腐剂的筛选和改良,得到了两个比较理想的配方ACB(暂定名)和CCB-M,并测定了它们的抗腐力、抗流失性、防蚁、防霉和防变色性能、耐燃性、对动物毒性、对木材强度的影响、对金属的腐蚀性等各项指标。ACB适合于橡胶木和建筑材的防腐,CCB-M可用于对处理材颜色要求不高的场合。是有推广价值的木材防腐剂。 相似文献
6.
7.
用高浓度防腐剂以浸渍-扩散法、满细胞法和双真空法对木结构房屋用材进行处理研究,确定了经济、实用的处理工艺。此外,按照国家标准《木材物理力学试验方法》(GB1927~1943—80)对鱼鳞云杉防腐处理材和对照材的主要力学性质进行对比测定,分析防腐处理对材质的影响,并用扫描电镜能谱仪分析测定CCA三组分在木材内部的分布,从微观角度评价处理工艺与防腐材的质量关系。 相似文献
8.
国外木材防腐技术和研究现状 总被引:15,自引:0,他引:15
从木材防腐剂、防腐处理工艺、改性处理及环境特性等几个方面对国外的木材防腐技术及研究现状进行较为系统、全面的介绍,并在此基础上指出木材防腐研究的几个主要方向.木材防腐剂的发展趋势是近期以水载防腐剂为主导,以开发综合性能优良的不含金属的有机防腐剂作为未来的发展方向;木材防腐处理工艺的重点在于增强防腐剂在木材中的渗透性,加速防腐剂与木材之间的固着反应以及开发新型的防腐处理工艺以适应新的防腐剂的需要.改性处理方面主要介绍木材的热处理和化学改性处理在防腐方面的应用现状.木材防腐处理的环境特性则着重介绍LCA技术(生命循环分析技术)以及防腐处理材的废弃处理问题.另外,还简要介绍木材防腐研究机构和协会、木材防腐标准等方面的情况.本文旨在使国内的木材研究者对当前木材防腐技术和研究有一个总体的认识,并在此基础上结合国内的实际情况,发展适于处理中国国内树种及适合市场需求的木材防腐技术,为更科学、更高效地利用国内木材资源提供新途径. 相似文献
9.
10.
采用铜氨(胺)季铵盐(ACQ-D)防腐剂处理马尾松木材,以水性高分子异氰酸酯(API)、聚氨酯(PUR)和间苯二酚-苯酚-甲醛树脂(RPF)为胶黏剂制备防腐材胶合试样,研究胶黏剂种类和防腐剂处理浓度对马尾松胶合强度的影响。结果表明:API、PUR、RPF适用于ACQ处理马尾松的胶合,平均剪切强度和木破率均达到GB/T 26899—2011《结构用集成材》要求。胶黏剂种类对防腐材胶合强度有显著影响,表现为PUR和RPF的剪切强度优于API。与未处理材相比,ACQ处理对API胶合有负面影响,对PUR胶合有增强效应,对RPF胶合没有显著影响。在ACQ浓度为0.1%~1.0%范围内,胶合强度没有显著变化。 相似文献
11.
In order to improve the leaching resistance of active ingredient-copper in ammoniacal copper quat-type D (ACQ-D) treated Chinese fir (Cunninghamia lanceolata Hook.),microwave post-treatments were carried out.The percentages of leached copper from ACQ-D treated Chinese fir with different microwave post-treatments were obtained after leaching tests by analyzing the copper retention in treated wood.The fixation mechanism of copper in the treated wood was determined with the help of SEM and FTIR spectra,while t... 相似文献
12.
Cao Jin-zhen Li Li-dan Liu Zhi College of Materials Science Engineering Beijing Forestry University Beijing P. R. China 《中国林学(英文版)》2005,7(4)
In this study, the contact angles of three different reference liquids (including distilled water, diiodomethane, and formamide) and PF resin on the surfaces of Chinese fir (Cunninghamia lanceolata) samples untreated or treated with different con- centrations of ACQ-D (ammoniacal copper quat Type D) solutions were measured. Then, the surface free energy was calculated by two approaches: acid-base approach and geometric mean approach. ACQ-D treatment caused higher contact angles and lower surface free energies at a retention level corresponding to the commodity treated wood products. When wood was treated with much higher concentrations of ACQ-D, the total surface free energy of wood would be higher than the untreated control. Acid-base/polar compo- nents related with the hydrogen bonding state in wood were considered to be responsible for the observed changes according to the applied approaches. The hydrophobic properties and also higher contact angles of PF resin drop on wood surfaces after ACQ-D treatment at a reasonable retention level confirms the changes on surface free energy. 相似文献
13.
Cao Jin-zhen Li Li-dan Liu Zhi 《中国林学(英文版)》2005,7(4):29-34
In this study, the contact angles of three different reference liquids (including distilled water, diiodomethane, and formamide) and PF resin on the surfaces of Chinese fir (Cunningharnia lanceolata) samples untreated or treated with different concentrations of ACQ-D (ammoniacal copper quat Type D) solutions were measured. Then, the surface free energy was calculated by two approaches: acid-base approach and geometric mean approach. ACQ-D treatment caused higher contact angles and lower surface free energies at a retention level corresponding to the commodity treated wood products. When wood was treated with much higher concentrations of ACQ-D, the total surface free energy of wood would be higher than the untreated control. Acid-base/polar components related with the hydrogen bonding state in wood were considered to be responsible for the observed changes according to the applied approaches. The hydrophobic properties and also higher contact angles of PF resin drop on wood surfaces after ACQ-D treatment at a reasonable retention level confirms the changes on surface free energy. 相似文献
14.
CCB是一种性能优良的木材防腐剂,但它的抗流失性能不如CCA,由于它是水溶性防腐剂,故处理后木材的尺寸亦不稳定。本研究采用在防腐剂中添加聚合物或树脂的方法来提高CCB的抗流失性能,使CCB处理材的尺寸稳定性大大提高。研究结果表明,在CCB中添加少量聚乙烯醇缩醛树脂后,铜、铬、硼的流失与不加树脂相比分别减少57.63,78.53和96,46%;木材湿胀性在弦向减少91.97%、径向减少88.34%、体积减少84,20%;处理材的抗腐力也明显提高。 相似文献
15.
我国CCA系列配方与英国CCA(Tanalith C,Celcure K33)的对比试验表明:我国CCA_3、CCA_6配方抗流失和对金属腐蚀效果接近英国产品;砷含量范围低于美国CCA—C型;国产原料配制的CCA_(S)抗流失和对金属腐蚀性较好。浸渍处理试验显示,CCA类防腐剂宜采用加压法。PPA油性防腐剂中的五氯酚溶解度、抗“霜”、油漆性能良好;CCB宜于处理门窗及室内木结构。表层化学浸渍处理可使硼在木材中的保留率提高到60—70%。 相似文献
16.
Gyu-Hyeok Kim Won-Joung Hwang Tsuyoshi Yoshimura Yuji Imamura 《Journal of Wood Science》2010,56(2):166-168
A laboratory no-choice termite bioassay was conducted to evaluate the ability of copper HDO (CX-A or copper xyligen) to protect
radiata pine (Pinus radiata D. Don) wood samples from attack by two subterranean termite species, Reticulitermes speratus and Coptotermes formosanus. A series of sapwood samples were pressure treated with either 0.25%, 0.50%, 0.75%, or 1.00% copper HDO solution. Samples
treated with equivalent concentrations of a benchmark preservative, CCA-C, were used as treated controls. All samples (including
controls) were subjected to an artificial weathering schedule before the bioassay. The samples were exposed to 30-day R. speratus tests and 3-week C. formosanus tests. Copper HDO was shown to deter termites from significant feeding on the treated wood. At a retention of 5.8 kg/m3 (treated
with 0.75% solution) or higher, the mass loss from termite feeding did not exceed 3% for both the 30-day R. speratus tests and the 3-week C. formosanus tests. At each of the retentions tested, copper HDO performed comparably with equivalent retentions of CCA-C; however, field
data are needed to validate these laboratory results. The preliminary findings are that copper HDO pressure treatment has
potential as a viable method of protecting wood from attack by both termite species tested. 相似文献
17.
《林业研究》2016,(2)
Chemical extraction, bioremediation, and electrodialytic processes have been extensively studied for removal of copper, chromium, and arsenic from wood treated with chromated copper arsenate(CCA). However,one problem has not been addressed: the effects of wood species and retention levels on remediation efficiency. The objectives of this study were to investigate the effects of wood species and retention levels on removal of copper,chromium, and arsenic from CCA-treated wood samples using sodium hypochlorite. Our results showed that sodium hypochlorite(Na OCl) was very effective for removal of copper, chromium, and arsenic from CCA-C treated milled wood samples for all three species used in this study. The Cu, Cr, and As extraction efficiencies for red pine were95 % Cu, 97 % Cr and 94 % As, for maple were 95 % Cu,97 % Cr, and 98 % As at 4.0 kg m-3retention levels, and for aspen were 95 % Cu, 92 % Cr, and 91 % As at9.6 kg m-3retention level, respectively. However, the results showed that wood species and initial retention levels of CCA-treated wood products played very important roles in terms of removal of Cu, Cr, and As. 相似文献
18.
19.
20.
ABSTRACT Acetylated wood is now commercially available and designed to be used in certain outdoor applications as an alternative to preservative-treated wood. Fastener corrosion can be a concern in preservative treated wood when the wood remains wet for long periods. However, little data on the corrosiveness of acetylated wood exists beyond the product literature. Here we examine the corrosiveness of commercially obtained acetylated wood and compare it against unmodified (untreated) southern pine (Pinus spp.). Corrosion rates of plain carbon steel, hot dip galvanized steel, and stainless steel were calculated gravimetrically after a one year exposed in the wood. Four different moisture conditions were examined: 90% relative humidity (RH), 95% RH, 100% RH, and a fully water saturated condition. When compared to literature data on the corrosion of fasteners in preservative treated wood at 100% RH, the acetylated wood had much lower steel corrosion rates than all preservatives examined; the measured corrosion rates for galvanized steel were lower than all preservatives except chromated copper arsenate. These measured corrosion rates across a range of moisture conditions can be used to inform the selection of appropriate corrosion resistant fasteners when building with acetylated wood. 相似文献