Optical signatures of the Aharonov-Bohm phase in single-walled carbon nanotubes

We report interband magneto-optical spectra for single-walled carbon nanotubes in high magnetic fields up to 45 tesla, confirming theoretical predictions that the band structure of a single-walled carbon nanotube is dependent on the magnetic flux phi threading the tube. We have observed field-induced optical anisotropy as well as red shifts and splittings of absorption and photoluminescence peaks. The amounts of shifts and splittings depend on the value of phi/phi(0) and are quantitatively consistent with theories based on the Aharonov-Bohm effect. These results represent evidence of the influence of the Aharonov-Bohm phase on the band gap of a solid.     

Optical spectroscopy of individual single-walled carbon nanotubes of defined chiral structure

We simultaneously determined the physical structure and optical transition energies of individual single-walled carbon nanotubes by combining electron diffraction with Rayleigh scattering spectroscopy. These results test fundamental features of the excited electronic states of carbon nanotubes. We directly verified the systematic changes in transition energies of semiconducting nanotubes as a function of their chirality and observed predicted energy splittings of optical transitions in metallic nanotubes.     

Coalescence of single-walled carbon nanotubes

The coalescence of single-walled nanotubes is studied in situ under electron irradiation at high temperature in a transmission electron microscope. The merging process is investigated at the atomic level, using tight-binding molecular dynamics and Monte Carlo simulations. Vacancies induce coalescence via a zipper-like mechanism, imposing a continuous reorganization of atoms on individual tube lattices along adjacent tubes. Other topological defects induce the polymerization of tubes. Coalescence seems to be restricted to tubes with the same chirality, explaining the low frequency of occurrence of this event.     

Solution properties of single-walled carbon nanotubes

Naked metallic and semiconducting single-walled carbon nanotubes (SWNTs) were dissolved in organic solutions by derivatization with thionychloride and octadecylamine. Both ionic (charge transfer) and covalent solution-phase chemistry with concomitant modulation of the SWNT band structure were demonstrated. Solution-phase near-infrared spectroscopy was used to study the effects of chemical modifications on the band gaps of the SWNTs. Reaction of soluble SWNTs with dichlorocarbene led to functionalization of the nanotube walls.     

Structure-assigned optical spectra of single-walled carbon nanotubes

Spectrofluorimetric measurements on single-walled carbon nanotubes (SWNTs) isolated in aqueous surfactant suspensions have revealed distinct electronic absorption and emission transitions for more than 30 different semiconducting nanotube species. By combining these fluorimetric results with resonance Raman data, each optical transition has been mapped to a specific (n,m) nanotube structure. Optical spectroscopy can thereby be used to rapidly determine the detailed composition of bulk SWNT samples, providing distributions in both tube diameter and chiral angle. The measured transition frequencies differ substantially from simple theoretical predictions. These deviations may reflect combinations of trigonal warping and excitonic effects.     

Conductance-controlled point functionalization of single-walled carbon nanotubes

We used covalent attachments to single-walled carbon nanotubes (SWNTs) to fabricate single-molecule electronic devices. The technique does not rely on submicrometer lithography or precision mechanical manipulation, but instead uses circuit conductance to monitor and control covalent attachment to an electrically connected SWNT. Discrete changes in the circuit conductance revealed chemical processes happening in real time and allowed the SWNT sidewalls to be deterministically broken, reformed, and conjugated to target species. By controlling the chemistry through electronically controlled electrochemical potentials, we were able to achieve single chemical attachments. We routinely functionalized pristine, defect-free SWNTs at one, two, or more sites and demonstrated three-terminal devices in which a single attachment controls the electronic response.     

Separation of metallic from semiconducting single-walled carbon nanotubes

We have developed a method to separate metallic from semiconducting single-walled carbon nanotubes from suspension using alternating current dielectrophoresis. Our method takes advantage of the difference of the relative dielectric constants of the two species with respect to the solvent, resulting in an opposite movement of metallic and semiconducting tubes along the electric field gradient. Metallic tubes are attracted toward a microelectrode array, leaving semiconducting tubes in the solvent. Proof of the effectiveness of separation is given by a comparative Raman spectroscopy study on the dielectrophoretically deposited tubes and on a reference sample.     

Band gap fluorescence from individual single-walled carbon nanotubes

Fluorescence has been observed directly across the band gap of semiconducting carbon nanotubes. We obtained individual nanotubes, each encased in a cylindrical micelle, by ultrasonically agitating an aqueous dispersion of raw single-walled carbon nanotubes in sodium dodecyl sulfate and then centrifuging to remove tube bundles, ropes, and residual catalyst. Aggregation of nanotubes into bundles otherwise quenches the fluorescence through interactions with metallic tubes and substantially broadens the absorption spectra. At pH less than 5, the absorption and emission spectra of individual nanotubes show evidence of band gap-selective protonation of the side walls of the tube. This protonation is readily reversed by treatment with base or ultraviolet light.     

Single crystals of single-walled carbon nanotubes formed by self-assembly

We report the self-assembly of single crystals of single-walled carbon nanotubes (SWCNTs) using thermolysis of nano-patterned precursors. The synthesis of these perfectly ordered, single crystals of SWCNTs results in extended structures with dimension on the micrometer scale. Each crystal is composed of an ordered array of tubes with identical diameters and chirality, although these properties vary between crystals. The results show that SWCNTs can be produced as a perfect bulk material on the micrometer scale and point toward the synthesis of bulk macroscopic crystalline material.     

Electronic structures of single-walled carbon nanotubes determined by NMR

Single-walled carbon nanotubes were studied by (13)C nuclear magnetic resonance (NMR). Two types of (13)C nuclear spins were identified with different spin-lattice relaxation rates. The fast-relaxing component, assigned to metallic tubes, followed the relaxation behavior expected in metals, and the density-of-states at the Fermi level increased with decreasing tube diameter. The slow-relaxing component has a significantly lower density-of-states at the Fermi level. Exposure to oxygen has a substantial effect on relaxation rates of both components.     

Water-assisted highly efficient synthesis of impurity-free single-walled carbon nanotubes

We demonstrate the efficient chemical vapor deposition synthesis of single-walled carbon nanotubes where the activity and lifetime of the catalysts are enhanced by water. Water-stimulated enhanced catalytic activity results in massive growth of superdense and vertically aligned nanotube forests with heights up to 2.5 millimeters that can be easily separated from the catalysts, providing nanotube material with carbon purity above 99.98%. Moreover, patterned, highly organized intrinsic nanotube structures were successfully fabricated. The water-assisted synthesis method addresses many critical problems that currently plague carbon nanotube synthesis.     

Resonant electron scattering by defects in single-walled carbon nanotubes

We report the characterization of defects in individual metallic single-walled carbon nanotubes by transport measurements and scanned gate microscopy. A sizable fraction of metallic nanotubes grown by chemical vapor deposition exhibits strongly gate voltage-dependent resistance at room temperature. Scanned gate measurements reveal that this behavior originates from resonant electron scattering by defects in the nanotube as the Fermi level is varied by the gate voltage. The reflection coefficient at the peak of a scattering resonance was determined to be about 0.5 at room temperature. An intratube quantum dot device formed by two defects is demonstrated by low-temperature transport measurements.     

Energy gaps in "metallic" single-walled carbon nanotubes

Metallic single-walled carbon nanotubes have been proposed to be good one-dimensional conductors. However, the finite curvature of the graphene sheet that forms the nanotubes and the broken symmetry due to the local environment may modify their electronic properties. We used low-temperature atomically resolved scanning tunneling microscopy to investigate zigzag and armchair nanotubes, both thought to be metallic. "Metallic" zigzag nanotubes were found to have energy gaps with magnitudes that depend inversely on the square of the tube radius, whereas isolated armchair tubes do not have energy gaps. Additionally, armchair nanotubes packed in bundles have pseudogaps, which exhibit an inverse dependence on tube radius. These observed energy gaps suggest that most "metallic" single-walled nanotubes are not true metals, and they have implications for our understanding of the electronic properties and potential applications of carbon nanotubes.     

Covalently bridging gaps in single-walled carbon nanotubes with conducting molecules

Molecular electronics is often limited by the poorly defined nature of the contact between the molecules and the metal surface. We describe a method to wire molecules into gaps in single-walled carbon nanotubes (SWNTs). Precise oxidative cutting of a SWNT produces carboxylic acid-terminated electrodes separated by gaps of 相似文献   

Molecular ordering of organic molten salts triggered by single-walled carbon nanotubes

When mixed with imidazolium ion-based room-temperature ionic liquid, pristine single-walled carbon nanotubes formed gels after being ground. The heavily entangled nanotube bundles were found to untangle within the gel to form much finer bundles. Phase transition and rheological properties suggest that the gels are formed by physical cross-linking of the nanotube bundles, mediated by local molecular ordering of the ionic liquids rather than by entanglement of the nanotubes. The gels were thermally stable and did not shrivel, even under reduced pressure resulting from the nonvolatility of the ionic liquids, but they would readily undergo a gel-to-solid transition on absorbent materials. The use of a polymerizable ionic liquid as the gelling medium allows for the fabrication of a highly electroconductive polymer/nanotube composite material, which showed a substantial enhancement in dynamic hardness.     

Discrete atom imaging of one-dimensional crystals formed within single-walled carbon nanotubes

The complete crystallography of a one-dimensional crystal of potassium iodide encapsulated within a 1.6-nanometer-diameter single-walled carbon nanotube has been determined with high-resolution transmission electron microscopy. Individual atoms of potassium and iodine within the crystal were identified from a phase image that was reconstructed with a modified focal series restoration approach. The lattice spacings within the crystal are substantially different from those in bulk potassium iodide. This is attributed to the reduced coordination of the surface atoms of the crystal and the close proximity of the van der Waals surface of the confining nanotube.     

Chemical detection with a single-walled carbon nanotube capacitor

We show that the capacitance of single-walled carbon nanotubes (SWNTs) is highly sensitive to a broad class of chemical vapors and that this transduction mechanism can form the basis for a fast, low-power sorption-based chemical sensor. In the presence of a dilute chemical vapor, molecular adsorbates are polarized by the fringing electric fields radiating from the surface of a SWNT electrode, which causes an increase in its capacitance. We use this effect to construct a high-performance chemical sensor by thinly coating the SWNTs with chemoselective materials that provide a large, class-specific gain to the capacitance response. Such SWNT chemicapacitors are fast, highly sensitive, and completely reversible.     

Oxygen doping modifies near-infrared band gaps in fluorescent single-walled carbon nanotubes

Controlled chemical modifications of single-walled carbon nanotubes (SWCNTs) that tune their useful properties have been sought for multiple applications. We found that beneficial optical changes in SWCNTs resulted from introducing low concentrations of oxygen atoms. Stable covalently oxygen-doped nanotubes were prepared by exposure to ozone and then light. Treated samples showed distinct, structure-specific near-infrared fluorescence at wavelengths 10 to 15% longer than displayed by pristine semiconducting SWCNTs. Dopant sites harvest light energy absorbed in undoped nanotube regions by trapping mobile excitons. The oxygen-doped SWCNTs are much easier to detect and image than pristine SWCNTs because they give stronger near-infrared emission and do not absorb at the shifted emission wavelength.     

Magnetic clusters on single-walled carbon nanotubes: the Kondo effect in a one-dimensional host

Single-walled carbon nanotubes are ideal systems for investigating fundamental properties and applications of one-dimensional electronic systems. The interaction of magnetic impurities with electrons confined in one dimension has been studied by spatially resolving the local electronic density of states of small cobalt clusters on metallic single-walled nanotubes with a low-temperature scanning tunneling microscope. Spectroscopic measurements performed on and near these clusters exhibit a narrow peak near the Fermi level that has been identified as a Kondo resonance. Using the scanning tunneling microscope to fabricate ultrasmall magnetic nanostructures consisting of small cobalt clusters on short nanotube pieces, spectroscopic studies of this quantum box structure exhibited features characteristic of the bulk Kondo resonance, but also new features due to finite size.     

基于单壁碳纳米管涂层纤维的固相微萃取技术测定水中的杀菌剂

利用以单壁碳纳米管为涂层的固相微萃取纤维,通过气相色谱联用方法,研究了不同试验条件对萃取效率的影响,并建立了水中百菌清、三唑酮、稻瘟灵和异菌脲4种杀菌剂的分析方法.结果表明,单壁碳纳米管固相微萃取纤维能在p H为1的条件下正常工作,对上述杀菌剂有很好的萃取能力.该方法灵敏度高,可满足环境水样的农残检测要求.