Molecular self-assembly and nanochemistry: a chemical strategy for the synthesis of nanostructures

Molecular self-assembly is the spontaneous association of molecules under equilibrium conditions into stable, structurally well-defined aggregates joined by noncovalent bonds. Molecular self-assembly is ubiquitous in biological systems and underlies the formation of a wide variety of complex biological structures. Understanding self-assembly and the associated noncovalent interactions that connect complementary interacting molecular surfaces in biological aggregates is a central concern in structural biochemistry. Self-assembly is also emerging as a new strategy in chemical synthesis, with the potential of generating nonbiological structures with dimensions of 1 to 10(2) nanometers (with molecular weights of 10(4) to 10(10) daltons). Structures in the upper part of this range of sizes are presently inaccessible through chemical synthesis, and the ability to prepare them would open a route to structures comparable in size (and perhaps complementary in function) to those that can be prepared by microlithography and other techniques of microfabrication.     

Cavitation and the interaction between macroscopic hydrophobic surfaces

The interaction in water of neutral hydrocarbon and fluorocarbon surfaces, prepared by Langmuir-Blodgett deposition of surfactant monolayers, has been investigated. The attraction between these hydrophobic surfaces can be measured at separations of 70 to 90 nanometers and thus is of considerably greater range than previously found. Spontaneous cavitation occurred as soon as the fluorocarbon surfaces were brought into contact but occurred between the hydrocarbon surfaces only after separation from contact. The very long range forces measured are a consequence of the metastability of water films between macroscopic hydrophobic surfaces. Thus the hydrophobic interaction between macroscopic surfaces may not be related to water structure in the same way that the hydrophobic effect between nonpolar molecules is related to water structure.     

Molecular Nanotube Aggregates of beta- and ggr-Cyclodextrins Linked by Diphenylhexatrienes

Linked by strings of diphenylhexatriene (DPH) molecules, beta- and gamma-cyclodextrins (CDs) can form nanotube aggregates that contain as many as approximately 20 betaCDs (20 nanometers long) or approximately 20 to 35 gammaCDs (20 to 35 nanometers long). Nanotube formation was indicated in solution, by fluorescence anisotropy and light scattering results, and on graphite surfaces, by scanning tunneling microscopy. Tubes were not observed for the smaller alphaCDs. Molecular modeling shows that CD cavity size and the rodlike DPH structure are key factors in nanotube formation. Spectra generated by proton nuclear magnetic resonance indicate the inclusion of DPH in the interior of the CDs and formation of nanotubes in betaCDs and gammaCDs only. The photophysical properties of DPH are affected by its arrangement into a one-dimensional array within the CD nanotube, possibly because of exciton formation.     

Conversion of supramolecular clusters to macromolecular objects

In a reaction proceeding within a nanoscopic volume, supramolecular clusters were transformed to polymer objects while retaining their shape and size. Spatial isolation of the cross-linkable blocks of oligobutadiene that were involved in this stitching reaction was achieved by self-assembly of the molecules that made up the clusters. Thermal activation of cross-linking yielded macromolecules (molecular weight of 70,000) with a narrow size distribution that was similar to that of the supramolecular clusters. The macromolecules obtained have an anisotropic shape (2 nanometers by 8 nanometers), as determined by electron microscopy and small-angle x-ray scattering, and form materials that exhibit a liquid crystalline state.     

Covalently bridging gaps in single-walled carbon nanotubes with conducting molecules

Molecular electronics is often limited by the poorly defined nature of the contact between the molecules and the metal surface. We describe a method to wire molecules into gaps in single-walled carbon nanotubes (SWNTs). Precise oxidative cutting of a SWNT produces carboxylic acid-terminated electrodes separated by gaps of 相似文献   

Sequence-specific molecular lithography on single DNA molecules

Recent advances in the realization of individual molecular-scale electronic devices emphasize the need for novel tools and concepts capable of assembling such devices into large-scale functional circuits. We demonstrated sequence-specific molecular lithography on substrate DNA molecules by harnessing homologous recombination by RecA protein. In a sequence-specific manner, we patterned the coating of DNA with metal, localized labeled molecular objects and grew metal islands on specific sites along the DNA substrate, and generated molecularly accurate stable DNA junctions for patterning the DNA substrate connectivity. In our molecular lithography, the information encoded in the DNA molecules replaces the masks used in conventional microelectronics, and the RecA protein serves as the resist. The molecular lithography works with high resolution over a broad range of length scales from nanometers to many micrometers.     

Structure of a Langmuir film on a liquid metal surface

The structure of organic monolayers on liquid surfaces depends sensitively on the details of the molecular interactions. The structure of a stearic acid film on a mercury surface was measured as a function of coverage with angstrom resolution. Unlike monolayers on water, the molecules were found here to undergo a transition from surface-parallel to surface-normal orientation with increasing coverage. At high coverage, two condensed hexatic phases of standing-up molecules were found. At low coverage, a two-dimensional (2D) gas phase and condensed single- and double-layered phases of flat-lying molecular dimers were revealed, exhibiting a 1D longitudinal positional order. This system should provide a broader tunability range for nanostructure construction than solid-supported self-assembled monolayers.     

Manipulation of adsorbed atoms and creation of new structures on room-temperature surfaces with a scanning tunneling microscope

A general method of manipulating adsorbed atoms and molecules on room-temperature surfaces with the use of a scanning tunneling microscope is described. By applying an appropriate voltage pulse between the sample and probe tip, adsorbed atoms can be induced to diffuse into the region beneath the tip. The field-induced diffusion occurs preferentially toward the tip during the voltage pulse because of the local potential energy gradient arising from the interaction of the adsorbate dipole moment with the electric field gradient at the surface. Depending upon the surface and pulse parameters, cesium (Cs) structures from one nanometer to a few tens of nanometers across have been created in this way on the (110) surfaces of gallium arsenide (GaAs) and indium antimonide (InSb), including structures that do not naturally occur.     

Organic molecules acting as templates on metal surfaces

The electronic connection of single molecules to nanoelectrodes on a surface is a basic, unsolved problem in the emerging field of molecular nanoelectronics. By means of variable temperature scanning tunneling microscopy, we show that an organic molecule (C90H98), known as the Lander, can cause the rearrangement of atoms on a Cu(110) surface. These molecules act as templates accommodating metal atoms at the step edges of the copper substrate, forming metallic nanostructures (0.75 nanometers wide and 1.85 nanometers long) that are adapted to the dimensions of the molecule.     

Small-diameter silicon nanowire surfaces

Small-diameter (1 to 7 nanometers) silicon nanowires (SiNWs) were prepared, and their surfaces were removed of oxide and terminated with hydrogen by a hydrofluoric acid dip. Scanning tunneling microscopy (STM) of these SiNWs, performed both in air and in ultrahigh vacuum, revealed atomically resolved images that can be interpreted as hydrogen-terminated Si (111)-(1 x 1) and Si (001)-(1 x 1) surfaces corresponding to SiH3 on Si (111) and SiH2 on Si (001), respectively. These hydrogen-terminated SiNW surfaces seem to be more oxidation-resistant than regular silicon wafer surfaces, because atomically resolved STM images of SiNWs were obtained in air after several days' exposure to the ambient environment. Scanning tunneling spectroscopy measurements were performed on the oxide-removed SiNWs and were used to evaluate the electronic energy gaps. The energy gaps were found to increase with decreasing SiNW diameter from 1.1 electron volts for 7 nanometers to 3.5 electron volts for 1.3 nanometers, in agreement with previous theoretical predictions.     

Templating of mesoporous molecular sieves by nonionic polyethylene oxide surfactants

Mesoporous silica molecular sieves have been prepared by the hydrolysis of tetraethylorthosilicate in the presence of low-cost, nontoxic, and biodegradable polyethylene oxide (PEO) surfactants, which act as the structure-directing (templating) agents. This nonionic, surfactant-neutral, inorganic-precursor templating pathway to mesostructures uses hydrogen bonding interactions between the hydrophilic surfaces of flexible rod- or worm-like micelles and Si(OC(2)H(5))(4-x)(OH)(x) hydrolysis products to assemble an inorganic oxide framework. Disordered channel structures with uniform diameters ranging from 2.0 to 5.8 nanometers have been obtained by varying the size and structure of the surfactant molecules. Metal-substituted silica and pure alumina mesostructures have also been prepared by the hydrolysis of the corresponding alkoxides in the presence of PEO surfactants. These results suggest that nonionic templating may provide a general pathway for the preparation of mesoporous oxides.     

Cell recognition during neuronal development

Insect embryos, with their relatively simple nervous systems, provide a model system with which to study the cellular and molecular mechanisms underlying cell recognition during neuronal development. Such an approach can take advantage of the accessible cells of the grasshopper embryo and the accessible genes of Drosophila. The growth cones of identified neurons express selective affinities for specific axonal surfaces; such specificities give rise to the stereotyped patterns of selective fasciculation common to both species. These and other results suggest that early in development cell lineage and cell interactions lead to the differential expression of cell recognition molecules on the surfaces of small subsets of embryonic neurons whose axons selectively fasciculate with one another. Monoclonal antibodies reveal surface molecules in the Drosophila embryo whose expression correlates with this prediction. It should now be possible to isolate the genes encoding these potential cell recognition molecules and to test their function through the use of molecular genetic approaches in Drosophila.     

Electrochemical detection of single molecules

The electrochemical behavior of a single molecule can be observed by trapping a small volume of a dilute solution of the electroactive species between an ultramicroelectrode tip with a diameter of approximately 15 nanometers and a conductive substrate. A scanning electrochemical microscope was used to adjust the tip-substrate distance ( approximately 10 nanometers), and the oxidation of [(trimethylammonio)methyl] ferrocene (Cp(2)FeTMA(+)) to Cp(2)FeTMA(2+) was carried out. The response was stochastic, and anodic current peaks were observed as the molecule moved into and out of the electrode-substrate gap. Similar experiments were performed with a solution containing two redox species, ferrocene carboxylate (Cp(2)FeCOO(-)) and Os(bpy)(3)(2+) (bpy is 2,2'-bipyridyl).     

Chemical etching of fission tracks in polyfluoro plastics

A method has been developed for the chemical etching of fission tracks in polyfluoro plastics. The formation of fine holes several tens of nanometers in diameter in polyvinylidene fluoride films, bombarded by fission fragments in oxygen and etched in 5-normal sodium hydroxide solution at 85 degrees C, was confirmed by electron microscopy.     

Serotonin storage in platelets: estimation of storage-packet size

Storage-body diameter and volume, and the number of molecules of serotonin contained in a storage body, were estimated for blood platelets. In the human, 5.23 x 10(5) molecules of serotonin are contained in a storage body 198 nanometers in diameter, while in the cat, 31.2 x 10(5) molecules of this amine are contained in a storage body 298 nanometers in diameter.     

Brownian motion of DNA confined within a two-dimensional array

Linear DNA molecules are visualized while undergoing Brownian motion inside media patterned with molecular-sized spatial constraints. The media, prepared by colloidal templating, trap the macromolecules within a two-dimensional array of spherical cavities interconnected by circular holes. Across a broad DNA size range, diffusion does not proceed by the familiar mechanisms of reptation or sieving. Rather, because of their inherent flexibility, DNA molecules strongly localize in cavities and only sporadically "jump" through holes. Jumping closely follows Poisson statistics. By reducing DNA's configurational freedom, the holes act as molecular weight-dependent entropic barriers. Sterically constrained macromolecular diffusion underlies many separation methods and assumes an important role in intracellular and extracellular transport.     

Measurement of the distribution of site enhancements in surface-enhanced Raman scattering

On nanotextured noble-metal surfaces, surface-enhanced Raman scattering (SERS) is observed, where Raman scattering is enhanced by a factor, G, that is frequently about one million, but underlying the factor G is a broad distribution of local enhancement factors, eta. We have measured this distribution for benzenethiolate molecules on a 330-nanometer silver-coated nanosphere lattice using incident light of wavelength 532 nanometers. A series of laser pulses with increasing electric fields burned away molecules at sites with progressively decreasing electromagnetic enhancement factors. The enhancement distribution P(eta)deta was found to be a power law proportional to (eta)(-1.75), with minimum and maximum values of 2.8 x 10(4) and 4.1 x 10(10), respectively. The hottest sites (eta >10(9)) account for just 63 in 1,000,000 of the total but contribute 24% to the overall SERS intensity.     

A molecular elevator

We report the incrementally staged design, synthesis, characterization, and operation of a molecular machine that behaves like a nanoscale elevator. The operation of this device, which is made of a platformlike component interlocked with a trifurcated riglike component and is only 3.5 nanometers by 2.5 nanometers in size, relies on the integration of several structural and functional molecular subunits. This molecular elevator is considerably more complex and better organized than previously reported artificial molecular machines. It exhibits a clear-cut on-off reversible behavior, and it could develop forces up to around 200 piconewtons.     

A light source smaller than the optical wavelength

A method has been developed for the efficient emission of light from subwavelength dimensions. It is based on packaging photons as molecular excitons, effectively reducing the volume of the light beam by 10(9) and making possible propagation through dimensions of 1 nanometer. Molecular microcrystals are grown in the tips of micropipettes that have inner diameters of 100 nanometers or less. Measurements are presented that demonstrate this improvement in transmission for pipettes of various diameters. The ultrasmall dimensions of these light sources, the wavelength range (ultraviolet to red) of their emission, their ease of production, and their expected unique abilities for high efficiency excitation-imaging of surfaces portend significant applications for this methodology.     

MOSFET-Embedded microcantilevers for measuring deflection in biomolecular sensors

A promising approach for detecting biomolecules follows their binding to immobilized probe molecules on microfabricated cantilevers; binding causes surface stresses that bend the cantilever. We measured this deflection, which is on the order of tens of nanometers, by embedding a metal-oxide semiconductor field-effect transistor (MOSFET) into the base of the cantilever and recording decreases in drain current with deflections as small as 5 nanometers. The gate region of the MOSFET responds to surface stresses and thus is embedded in silicon nitride so as to avoid direct contact with the sample solution. This approach, which offers low noise, high sensitivity, and direct readout, was used to detect specific binding events with biotin and antibodies.