Bioactive and multifunctional textile using plant-based madder dye: Characterization of UV protection ability and antibacterial activity

In the present work the natural madder dye (Rubia tinctorum L.) was applied to the simultaneous dyeing and functionalization of polyester (PET) fabric. In the first part of the study the color performance and the durability were revealed for exhaustion dyed fabric. The dyed fabric was then characterized with respect to ultraviolet (UV) protection ability and antibacterial activity against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). CIELab color coordinates, namely the positive a* and b* values, confirmed a yellow/orange color of the dyed fabric. From durability tests, the color showed a moderate to good light fastness and good to excellent fastness to washing and rubbing. The madder dye improved both the UV protective performance and the antibacterial activity of the fabric. With 3 % on weight of fiber (owf) the UV protection factor increased up to 106, and the antibacterial activity up to 86 % against both types of bacteria tested.     

Dyeability and Antibacterial Finishing of Hemp Fabric Using Natural Bioactive Neem Extract

Two functional compounds were successfully extracted from neem (Azadiracta indica): a tannin-rich natural dye and an antibacterial agent. The dye was extracted from the bark using water, and the antibacterial from the leaf using methanol. These were used to dye hemp fabrics. Higher color strength values (K/S) were found when dyeing was conducted at a higher dye concentration, elevated temperature, and longer dyeing time. Optimal results were achieved when using 5 %w/v of extracted powder at 100 °C for 60 min. The resulting fabrics appeared reddish-brown, and were rated as good to excellent for color fastness against washing, water, sea water, and perspiration. The antibacterial agent from the neem leaf was extracted by Soxhlet apparatus at 65 °C with methanol as solvent. The dyed and antibacterial-finished hemp fabrics were tested against Staphylococcus aureus, following the percentage reduction test of AATCC 100. The treated fabrics demonstrated a 99.99 % reduction in Staphylococcus aureus.     

Dyeing and antibacterial properties of <Emphasis Type="Italic">Liriope platyphylla</Emphasis> fruit extracts on silk fabrics

Dyeing and antibacterial properties of a natural dye extracted from Liriope platyphylla fruit applied on silk fabrics have been studied. The total phenolic content (1109.13±69.02 mg), total flavonoid content (530.60±89.44 mg), and total anthocyanin content (492.26±77.79 mg) were measured in 100 g fresh weight of L. platyphylla fruits. In addition, ten anthocyanins and four flavanols were identified in L. platyphylla fruits by high performance liquid chromatography with diode array detection coupled with electrospray ionization mass spectrometry (HPLC-DAD/ESI-MS). A broad variation in color shade and color depth can be achieved with mixtures of dye extracts and metal mordants. Purple, blue, and pale green were main color shades of silk fabrics dyed with the extracts. The fastness of dyed silk fabrics except for control dyed fabrics against light, washing, and rubbing were acceptable with at least a grey scale rating of 3. The antibacterial activities of L. platyphylla fruit extracts were retained on dyed silk fabrics even after home washing 30 cycles. Mordanting with metal salt mordant had a positive effect on antibacterial activity of dyed silk fabrics in this study. Among them, aluminum and copper were the most effective mordants for improving antibacterial activity of silk fabrics dyed with L. platyphylla fruit extracts. The costs of natural dyeing of per silk fabrics kg by the extracts from L. platyphylla fruit were also calculated on laboratory scale.     

Application of <Emphasis Type="Italic">Sterculia Foetida</Emphasis> Fruit Shell Waste Biomolecules on Silk for Aesthetic and Wellness Properties

There has been growing interest in the use of bioresource waste for natural dyeing and finishing. This paper discusses dye extraction from the novel source fruit shell waste of Sterculia foetida and its application on mulberry silk fabric to confer aesthetic coloration and wellness properties such as ultra-violet (UV) protection and antibacterial properties. Treated fabrics showed a substantial increase in color depth and adequate wash, light, and rubbing fastness properties for dyed silk fabrics with and without mordanting. Pre-and post-mordanting of silk fabrics were carried out using mordants such as alum, harda (myrobalan), and copper sulfate. UV-visible spectrophotometric analysis of fruit shell extract (FSE) at different pHs and FSE with three different mordants at neutral pH was used to understand the phenomena of dye-fiber interaction. The treated fabrics characterised by ATR-FTIR, SEM-EDS, and XRD analysis indicate the nature of dye fiber interaction justifying the multifunctional properties. The treated fabric also showed very good ultraviolet protection property and antibacterial properties both against S. aureus and E. coli bacteria even after ten washes. The results indicate that Sterculia foetida fruit shell extract offers an excellent potential as coloration, antibacterial, and ultraviolet protective agent for mulberry silk fabric.     

Natural dyeing of cotton with <Emphasis Type="Italic">Xylocarpus granatum</Emphasis> bark extract: Dyeing,fastness, and ultraviolet protection properties

In this research we investigated the dyeing of cotton fabrics with extracts of Xylocarpus granatum, a mangrove plant with a long history of use in leather tanning and textile dyeing. X. granatum bark was extracted and spray-dried, yielding a tannin-rich, reddish-brown powder. This powder proved a suitable colorant for the natural dyeing of cotton with promising color fastness properties to wet treatments (washing, water, sea water, and perspiration), hot pressing, crocking, and light exposure. However, the dye alone produced only weak levels of coloration and therefore metallic salt mordants were employed to improve the color strength, through the formation of insoluble tannate complexes. The resulting fabric K/S values were dependent on the mordant used and exhibited the following trend: ferric sulfate > sodium dichromate > copper sulfate > potassium aluminum sulfate > no mordant, for fabrics exposed to mordants before and after dyeing. Mordanting resulted in slight variations in shade and color fastness. In most cases, the color fastness properties were preserved, except for color fastness to light and hot pressing, for which lowered ratings were found for some mordants. Stiffness and mechanical performance were not greatly affected by dyeing or mordanting, except for sodium dichromate mordanting which significantly stiffened and weakened the fabric. The ultraviolet protection factor (UPF) of all the dyed samples achieved the maximum (50+) level, highlighting the excellent UV shielding properties of the fabric. Overall, X. granatum bark extract is a promising, effective colorant for the natural dyeing of cotton in terms of appearance, fastness, and physical characteristics.     

Natural Dyeing of Wool by Madder (<Emphasis Type="Italic">Rubia tinctorum L</Emphasis>.) Root Extract Using Tannin-based Biomordants: Colorimetric,Fastness and Tensile Assay

In this work, the natural dyeing behavior of woollen yarn with madder (Rubia tinctorum L.) root extract was studied. The effects of different tannin-rich plants (Rhus coriaria, Eucalyptus, Terminalia chebula, Quercus castaneifolia, Pomegranate) extract as biomordants and alum (as a chemical mordant) with two mordanting procedures (pre- and metamordanting) on color characteristics of the dyed samples were also investigated. The CIEDE2000 values, color strength (K/S), washing fastness and tensile property of the mordanted and dyed samples were assessed. Visually, a range of hues from orange to brownish-red were obtained. In general, pre-biomordanted samples with Rhus coriaria (10 %owf), Eucalyptus (10 %owf), Terminalia chebula (5 %owf), Quercus castaneifolia (5 %owf) and Pomegranate (5 %owf) showed almost the same color difference (ΔE₀₀) and wash fastness values compared to those treated with 3 %owf alum. Finally, it was concluded from the comparative studies that the biomordants have good potential to be considered as alternatives to the common chemical mordants.     

<Emphasis Type="Italic">Limoniastrum monopetalum</Emphasis> stems as a new source of natural colorant for dyeing wool fabrics

In the present study, an attempt has been made to dye the wool fabric with Limoniastrum monopetalum stems, as a source of natural dye, which has not been exploited so far. Optimization of extraction parameters was done. Optimum results of extraction process were obtained with a dye concentration of 60 g/l, a temperature of 90 °C during 100 min. The study of different factors effecting dyeability of wool fabrics by aqueous L. monopetalum stems extract showed that the pH of dye bath and dyeing temperature and time affected considerably the color yield. The best results were obtained at the following conditions; pH 2, 100 °C, and 60 min. Metal mordants, when used in conjunction with L. monopetalum dye, allowed to obtain various shades. The determination of phenolic contents of aqueous L. monopetalum stems extract showed a high amount of phenolic components. Based on RP-HPLC, the coloring extract of L. monopetalum stems contains tannins and polyphenols. The major identified phenolic compounds were procatechuic, Trans-cinnamic and gallic acids. Hence, aqueous L. monopetalum stems extract could be successfully exploited for dyeing wool fabrics with high color yield (K/S).     

Multifunctionalised silk using <Emphasis Type="Italic">Delonix regia</Emphasis> stem shell waste

The use of natural dyes and natural finishes on textiles has become a matter of significant importance because of the increased environmental awareness to avoid some hazardous synthetic dyes and synthetic chemicals. The Delonix regia stem shells were extracted in distilled water methanol and ethanol solvents. Phytochemical analysis was carried out for the presence of bioactive chemical constituents such as saponin, terpenoid, flavonoid, glycoside, phenol and tannin using the standard procedure. All the tests showed positive for the presence of components except saponin in methanol and ethanol extract. The qualitative antibacterial analysis was done by AATCC 147 method with excerpts from three different solvents both against S. aureus (gram-positive) and E. coli (gram-negative) bacteria. Delonix regia stem shell extract (DSE) in distil water was used for natural dyeing of mulberry silk fabric. Pre-mordanting and post-mordanting of silk fabric were carried out using alum and myrobalan mordants. Treated fabrics showed a substantial increase in colour depth (K/S) and adequate wash, light and rubbing fastness properties without and with mordanted and dyed silk fabrics. Quantitative antibacterial analysis by AATCC 100 method was done on dyed silk fabric which showed very good resistance both against bacteria S. aureus and E. coli bacteria. Dyed silk fabric also showed good to very good ultraviolet (UV) protection property. The physicochemical composition of the untreated and without mordant treated silk fabrics were analysed by attenuated total reflection (ATR) Fourier transforms infrared (FTIR) spectroscopy, scanning electron microscope (SEM), energy dispersive spectrometry (EDS) and atomic absorption spectrophotometer (AAS). In addition to that wash, durability was also measured of dyed silk fabric for antibacterial and ultraviolet protection (UPF) properties according to AATCC 61 2A washing method.     

Acrylamide assisted photoinitiator-free photografting of acrylamido dyes onto wool

Upon UV irradiation wool fabrics can be photografted with photoactive acrylamido dyes at room temperature without photoinitiaors, which is eco-friendly coloration process compared with conventional adsorption-based dyeing. Acrylamide addition as a comonomer can improve the photografting probably by reducing the steric hindrance between the bulky dyes during the photocopolymerization. Even without photointiators and neutral salts, the optimal K/S values of the photografted wool reached upto 18.7 and 18.5 for Reactive Red 84 and Yellow 39 dyes respectively. The optimal UV-grafting coloration can be achieved when a UV energy of 25 J/cm² was irradiated on the padded fabrics with 6.3 %owf dye containing 0.65 mole ratio of acrylamide to the dyes. Furthermore, the color fastness of the grafted fabrics was as good as those of conventionally dyed fabrics due to the copolymerization of dyes and comonomers.     

Extraction of natural dye from <Emphasis Type="Italic">Coreopsis tinctoria</Emphasis> flower petals for leather dyeing − An eco-friendly approach

This study evaluated the extraction of two colors of dye (yellow and brown) from Coreopsis tinctoria flower petals using ultrasound and the dyeing of leather with the extracted dyes as a source of nontoxic and eco-friendly dye. The results showed an increase in the dye extraction values with increasing time at 100 W ultrasonic power at 80 °C for 1 h. Leather dyeing was optimized with the aid of ultrasound and magnetic stirring. The optimum leather dyeing conditions, with respect to the dye uptake, dye penetration and intensity of the color, were determined to be 12 % dye concentration, 100 W power, 1,000 rpm, and pH 7.0 for 60 min at 80 °C. It was shown that sonication improves dye exhaustion from a 90 % to 60 % rating for 1 h of dyeing time. The dyed leather was assessed by reflectance measurements and compared with visual assessment data. The fastness properties of dyed leather samples showed good fastness against washing, light, and dry and wet rubbing. The strength properties were not significantly altered and the bulk properties, such as softness, were found to be improved by the use of Coreopsis tinctoria yellow and brown dyes using an ultrasonic and magnetic stirring dyeing process.     

Exploring the potential uses of <Emphasis Type="Italic">Vitis vinifera</Emphasis> L. leaves as raw material for textile dyeing without metal mordants

This paper explores the potential uses of the aqueous extract of Vitis vinifera L. leaves in dyeing linen and silk fabrics without a metal mordant. The focus will be on investigating the tinctorial potential of Vitis vinifera L. leaves and its dyeing properties. The anthocyanins amounts of leaves from different Vitis vinifera L. varieties were determined by the spectrophotometry method. The effect of the main dyeing parameters (pH of the dye bath, temperature, and dyeing duration) on the dyeing quality results has been studied. Tannic acid and pomegranate peel extract have been used as a natural mordant. Experimental results have shown that fastness properties of dyed fabrics ranged from average to very good.     

The Use of Sumac as a Natural Mordant in Green Production of Iranian Carpet

Dyeing is a state-of-the-art realm of textile engineering, however, the emphasis on petroleum-based products is now shifting towards green fibers, particularly, green manufacturing processes. In the present work, a natural mordant, sumac, was extracted and used alone and in combination with alum (a mineral mordant) in silk fibers dyeing with madder and Reseda green dye to make the green production of Iranian carpet possible. The FT-IR ATR spectra of the washed, mordanted, and mordanted dyed silk fibers revealed bonding between silk fibers and green materials. The color of the silk fibers dyed with madder and Reseda extraction was quantified in terms of CIELab (L*, a*, and b*) and K/S values. The effects of different treatments on fastness properties including light, wash, and rubbing fastness were assessed by ISO standard test method.     

Application of triazole-containing gemini cationic darkening agent in cold pad batch dyeing for cotton knits

4-Amino-double(octadecyldimethyl ammonium chloride)-1,2,4-triazole (ADAC-TZ), a gemini cationic auxiliary with a heterocyclic triazole structure, was designed and synthesized by the method described here and characterized for use in the cold pad batch dyeing of cotton knits. The results show that, for ADAC-TZ, the critical micelle concentration (CMC) is 4.0×10^-4 mol/l, the Krafft point is 29.8 °C, the foam height is only 169 mm/5 min, and the solubilization for toluene is 6.67 ml/g, which means that ADAC-TZ exhibits excellent low-foaming, water solubility and solubilization properties. The present research also demonstrates that ADAC-TZ pretreatment can increase the K/S value, dye fixation, and color fastness to washing and rubbing of cotton knits dyed through BES reactive dye cold pad batch dyeing used in combination with the alkaline agent QF-4.     

Meta-mordant Dyeing with <Emphasis Type="Italic">Camellia sinensis</Emphasis> (L.) O. Ktze var. <Emphasis Type="Italic">waldensae</Emphasis> (S.Y.Hu) Chang (Yellow-bud Tea) Extract for Wool Fabrics Treated by UV Radiation

The wool fabrics were treated by ultraviolet (UV) radiation and then dyed with Camellia sinensis (L.) O. Ktze var. waldensae (S.Y.Hu) Chang (yellow-bud tea) extract using meta-mordant dyeing method. The results indicated that the hydrophilicity of wool fabrics was improved after UV radiation treatment, which was conducive in improving color performance for the meta-mordant dyeing with yellow-bud tea extract of wool fabrics. The optimal dyeing process was that the powdered extract (5.0 % o.w.f) and the CuSO₄ (2.0 % o.w.f) were added to the dyeing liquor, the pH value was adjusted to 3.5-4.0 by HCOOH, the wool fabrics treated by UV radiation for 10 min and then were dyed at a bath ratio of 1:50 under 95 °C for 70 min. By means of three-factor quadratic current rotation revolving design (TQCRRD) method, the computation results of the mathematical equations and models indicated that UV radiation was the most important factor for meta-CuSO₄ dyeing with yellow-bud tea extract for wool fabrics.     

Application of liquid organic salt to cotton dyeing process with reactive dyes

Reactive dyes are used widely in cotton dyeing process. Reactive dyeing uses high amounts of inorganic salts to accelerate dye exhaustion. These salts are then discharged to the effluent, leading to serious environmental problems. Biodegradable organic salts can alternatively be used in the dyeing process. In this paper, a new liquid organic salt was synthesized by acid-base neutralization, which was used to replace inorganic salts in reactive dyeing. Dye exhaustion in organic salt dyeing was similar to the values in conventional dyeing. However, dye fixations were slightly lower in organic salt dyeing than in conventional dyeing. The washing fastness of dyed fabrics with organic salt was excellent. Experimental results showed that dye exhaustion reached the maximum value when the concentration range of organic salt was from 20 g/l to 40 g/l. In addition, the optimal alkali concentration in organic salt dyeing was found to be about 30 g/l. These parameters suggested organic salt could replace inorganic salt in reactive dyeing process.     

Structural Transformation and Dyeing Performance of Poly(Ethylene Terephthalate) Filament Using Dicationic Imidazolium Ionic Liquid

3,3'-[1,2-ethanediylbis (oxy-2,1-ethanediyl)]-bis[1-methyl-imidazolium]-dibromide (DImDBr), a gemini imidazolium ionic liquid, was synthesized for the modification and dyeing promotion of poly(ethylene terephthalate) (PET) filaments. The results showed that parameters such as treatment temperature, time, and DImDBr concentration played a critical role on the tensile strength and tensile strength retention of modified PET filaments. The optimal treatment parameters of the PET filaments were 120 °C for 90 min with addition of 6 % ionic liquid. The influence of disperse dyeing parameters (temperature, time, and dye concentration) on DImDBr modified PET filaments were also studied. The disperse dyed PET filaments (after treatment with DImDBr) exhibited a desirable color strength (K/S value), excellent soap washing fastness, light fastness, and rubbing fastness. Furthermore, the native PET filaments and DImDBr treated PET filaments were characterized by FT-IR, XRD, DSC, TGA, and SEM. Density functional theory (DFT) simulation showed the presence of two kinds of hydrogen bonds (C-H/O and O-H/Br) and eight strong hydrogen bonds in the DImDBr/cis-PET monomers, while only three hydrogen bonds were found in the DImDBr/trans-PET monomers. The structural transformation from the crystalline phase to the amorphous phase (FT-IR, XRD, and DFT simulation) after DImDBr modification confirmed the dyeing promotion of PET filaments at lower temperature.     

Optimization and extraction of extra and intracellular color from <Emphasis Type="Italic">Penicillium minioluteum</Emphasis> for application on protein fibers

Precedence of microbial colorants can be seen in almost all the industrial sectors viz. food, textile, paper, agriculture, pharmaceutical, and cosmetics. These colorants are gaining popularity due to their salient advantages over synthetic and natural dyes. This study deals with the optimization and extraction of such colorants from Penicillium minioluteum for the purpose of dyeing different protein fibers. Penicillium minioluteum was cultured under different growth conditions to optimize the extracellular color production. The extracellular colorant grown under optimized fermentation conditions (medium-sabouraud; pH-5.6; temperature-15 °C; time-20 days; incubation-static) in 3000 ml haffkine flask showed maximum color or highest optical density of 1.014 at λ _max=490 nm. Later on, this colorant was extracted using nbutanol. The remaining mycelial mat obtained after filtration was extracted using different chemical and mechanical procedures to get the intracellular colorant. Highest O.D of 0.897 was recorded at λ _max=490 nm when desiccated powdered mycelial mat was extracted with methanol. Dyed silk and leather with the extracellular colorant showed color strength (K/S) as 3.88 and 3.81, respectively, whereas silk and leather dyed with the intracellular colorant showed K/S as 0.56 and 0.55, respectively. The color strength of extracellular dyed samples was found to be three times higher as compared to the samples dyed with the intracellular aqueous colorant of the same optical density. After dyeing, two different shades were obtained viz. deep red with the extracellular colorant and beige with the intracellular colorant on mulberry silk and wet blue goat nappa skin leather. Fastness towards rubbing was found to be good for both the samples. Wash fastness was excellent on silk. Fastness towards light was poor for both silk and leather. Furthermore, the color yield of the extracellular colorant (0.62 %) was found to be approximately five times more than the color yield of the intracellular colorant (0.14 %).     

LED-UV grafting of vinylsulfone dyes onto photo-oxidized wool fabrics

Photografting coloration of wool was carried out under UV-LED irradiation at room temperature using aqueous vinylsulfone dye solution containing vinylsulfonic acid as a comonomer. UV-LED irradiation of the 395 nm emission is more energy efficient, less damaging to the dyes, and much safer to human eyes compared with polychromatic mercury UV lamps. However, in case of the UV-LED lamps, the wool needs to be photo-oxidized either by UV/ozone or polychromatic UV irradiation before the dye photografting. The surface treatments increased the sulfur and oxygen contents in the modified wool surfaces. While the optimally photografted wool fabrics under the UV-LED lamp yielded a K/S value of 9.9, the K/S of the grafted wool increased to 25.2 and 13.6 after the UV/Ozone or polychromatic UV preoxidation at UV energies of 10.6 J/cm² and 25 J/cm² respectively. The color fastness properties of the photografted fabrics were far better than with those of the conventionally reactive-dyed fabrics, implying that the high-molecular-weight photografted dyes seemed to be more durable than the low-molecular dyes.     

Cotton Dyeing and Antibacterial Finishing Using Agricultural Waste by an Eco-friendly Process Optimized by Response Surface Methodology

In this study, Berberis vulgaris L. wood as an agricultural waste was used for dyeing and functional finishing of cotton. To facilitate the attachment of natural dye, citric acid was used to create carboxylic acid functional groups on cotton fibers. The process of crosslinking of cotton fabric with citric acid was optimized in order to obtain the maximum dyeability with the cationic natural dye. The effects of three important factors including citric acid concentration, sodium hypophosphite concentration and curing temperature on the color strength of the dyed samples with woods of barberry tree were analyzed by response surface methodology and the optimum conditions for obtaining the highest color strength was obtained. The crosslinking of citric acid on cotton fibers was confirmed by FTIR spectroscopy. The dyed sample prepared under the optimum conditions of crosslinking showed good wash and light fastness properties besides very good antibacterial activity against gram-negative and gram-positive bacteria.     

Application of MCT-βCD to Modify Cellulose/Wool Blended Fabrics for Upgrading Their Reactive Printability and Antibacterial Functionality

Pre-loading of monochlorotriazinyl β-Cyclodextrin (MCT-βCD) onto/within viscose/wool (V/W) and cotton/wool (C/W) blended fabrics provide hosting cavities that can form host-guest inclusion complexes with reactive dyes in postprinting as well as with triclosan derivative or silver nanoparticles/hyperbranched polyamide-amine (AgNPs/HBPAA) composite in subsequent final antibacterial finishing step. Coloration properties, antibacterial activity against (S. aureus) and (E. coli) pathogenic bacteria, durability of the obtained products, according to the above mentioned route, to wash, surface morphology and composition of selected samples were investigated. Results obtained signify that premodification of the nominated substrates with MCT-βCD (10 g/l), followed by reactive printing with mono-or bifunctional reactive dye (20 g/l), and subsequent post-finishing with triclosan derivative or AgNPs/HBPAA composite (15 g/l each) is an efficient treatments sequence for attaining reactive prints with significant antibacterial efficacy and noticeable durability to wash. Surface depositions of selected active ingredients were also confirmed using SEM and EDX analysis.