Gas chromatographic determination of N-nitrosodialkanolamines in herbicide Di- or trialkanolamine formulations

A modified method is presented to determine trace quantities of N-nitrosodiethanolamine (NDElA) and N-nitrosodiisopropanolamine (NDiPlA) in the triisopropanolamine (TiPlA) formulation of a mixture of picloram and 2,4-D. Aqueous sample is extracted with dichloromethane to remove organic interferences, and then the aqueous layer is passed sequentially through chloride anion exchange column, hydrogen cation exchange column, and Clin-Elut extraction tube. The final eluate, 10% acetone in ethyl acetate, is concentrated. The isolated nitrosamines are converted to the corresponding trimethylsilyl (TMS) derivatives and determined by gas chromatography (GC) on a DB1 column coupled with a thermal energy analyzer (GC-TEA). Eight samples of commercial TiPlA formulations are analyzed. Maximum detected levels of NDElA and NDiPlA were 0.6 and 0.9 ppm, respectively, expressed relative to total weight of active ingredients. Analysis of 13 samples of herbicide DElA formulation using a previously established method and a DB225 column gave NDElA results of 0.7-6.0 ppm. NDiPlA was not detected in those samples. Results are confirmed by GC-mass spectrometry (GC/MS) with oxygen negative chemical ionization (ONCI) detection. Detection limits for both nitrosamines are 0.05 or 0.07 ng (0.1 or 0.17 ppm) for GC-TEA detection, depending on the analytical columns used, and 20 pg (0.04 ppm) for GC/MS detection. Recoveries of NDElA are 87-109% for DElA formulation spiked at 2.6 and 3.9 ppm and 90-115% for TiPlA formulation spiked at 0.2-0.3 ppm. Similarly, recoveries of NDiPlA are 95.7-100% for the DElA formulation spiked at 0.24 and 0.48 ppm, and 82-118% for the TiPlA formulation spiked at 0.2-0.3 ppm.     

Gas chromatographic determination of formaldehyde in coffee via thiazolidine derivative

Thiazolidine formed from trace quantities of formaldehyde in an aqueous solution containing cysteamine at pH 8 was extracted with chloroform and subsequently analyzed by a gas chromatograph equipped with a fused silica capillary column and a thermionic nitrogen-phosphorus specific detector. Recoveries of formaldehyde from the aqueous solutions at levels lower than 1 ppm were slightly over 100%. Quantitative analysis of formaldehyde in commercial brewed and instant coffees showed 3.4-4.5 ppm in the brewed and 10-16.3 ppm in the instant coffee.     

Quantitation of the nitrosamine 2-ethylhexyl-4-(N-methyl-N-nitrosoamino) benzoate (NPABAO) in sunscreen products.

We have devised a method to quantitate the nitrosamine, 2-ethylhexyl-4-(N-methyl-N-nitrosoamino) benzoate (NPABAO), in commercial products containing the sunscreen ingredient, Padimate O. The method involves a minimum of cleanup steps to afford a nonaqueous extract from product emulsions suitable for analysis by a liquid chromatograph interfaced to a thermal energy analyzer (LC/TEA). The method is applicable to lotions, creams, and gels. Oils are normally soluble in the mobile phase and can be analyzed directly on the LC/TEA without additional cleanup procedures. The method has a minimum detectable limit of about 30 ppb and yields greater than 80% recovery. It is highly reproducible and generates no NPABAO artifactually prior to quantitation on the LC/TEA. Application of the method to 22 different commercial product formulas disclosed that the level of NPABAO in each of the products is below 250 ppb, with 18 of the products containing less than 100 ppb. Of interest was the observation that musk ketone, a common fragrance constituent, produces a false-positive TEA response that can interfere with accurate analysis of NPABAO content in typical commercial products.     

Determination of olaquindox residues in swine tissues by liquid chromatography

A liquid chromatographic (LC) method is described for determination of olaquindox residues in swine tissues. The drug is extracted from tissues with acetonitrile, and the extract is evaporated to dryness. This residue is cleaned up by alumina column chromatography. LC analysis is carried out on a Nucleosil C18 column, and olaquindox is quantitated by ultraviolet detection at 350 nm. The average recoveries of olaquindox added to tissues at levels of 0.2, 0.1, and 0.05 ppm were 74.0, 68.6, and 66.3%, respectively. The detection limit was 2 ng for olaquindox standard and 0.02 ppm in tissues.     

Liquid chromatographic determination of three sulfonamides in animal tissue and egg

Sulfonamides are widely used as a feed additive in animal production in Japan. The present paper is a determination of 3 sulfonamides: sulfamethazine (SMZ), sulfamonomethoxine [SMX, 4-amino-N-(3-methoxypyrazinyl)-benzenesulfonamide], and sulfadimethoxine (SDX) in animal tissue and egg by liquid chromatography (LC). Tissues were extracted with acetonitrile and fat was removed by liquid/liquid partition. The sulfonamides were purified by an ODS cartridge column; then each compound was separated by an ODS LC column and detected at 268 nm. Quantification levels were 0.02 ppm for SMZ and SMX, and 0.04 ppm for SDX; detection limits were 0.01 ppm for SMZ and SMX, and 0.02 ppm for SDX. Calibration curves were linear between 2 and 40 ng for SMZ and SMX, and between 4 and 80 ng for SDX. Recoveries from muscle and egg samples spiked with 1-2 micrograms/10 g were 81-98%.     

The power of hyphenated chromatography/time-of-flight mass spectrometry in public health laboratories

Laboratories devoted to the public health field have to face the analysis of a large number of organic contaminants/residues in many different types of samples. Analytical techniques applied in this field are normally focused on quantification of a limited number of analytes. At present, most of these techniques are based on gas chromatography (GC) or liquid chromatography (LC) coupled to tandem mass spectrometry (MS/MS). Using these techniques only analyte-specific information is acquired, and many other compounds that might be present in the samples would be ignored. In this paper, we explore the potential of time-of-flight (TOF) MS hyphenated to GC or LC to provide additional information, highly useful in this field. Thus, all positives reported by standard reference targeted LC-MS/MS methods were unequivocally confirmed by LC-QTOF MS. Only 61% of positives reported by targeted GC-MS/MS could be confirmed by GC-TOF MS, which was due to its lower sensitivity as nonconfirmations corresponded to analytes that were present at very low concentrations. In addition, the use of TOF MS allowed searching for additional compounds in large-scope screening methodologies. In this way, different contaminants/residues not included in either LC or GC tandem MS analyses were detected. This was the case of the insecticide thiacloprid, the plant growth regulator paclobutrazol, the fungicide prochloraz, or the UV filter benzophenone, among others. Finally, elucidation of unknowns was another of the possibilities offered by TOF MS thanks to the accurate-mass full-acquisition data available when using this technique.     

Liquid chromatographic determination of spiramycin residues in chicken tissues

A liquid chromatographic (LC) method is described for determination of spiramycin residues in chicken muscles. The drug is extracted from muscles with acetonitrile, the extract is concentrated to 3-4 mL and rinsed with n-hexane followed by ethyl ether, and the drug is extracted with chloroform. LC analysis is carried out on a Zorbax BP-C8 column, and spiramycin is detected spectrophotometrically at 231 nm. Recoveries of spiramycin added to chicken muscles at 0.2 and 0.1 ppm were 93.9 and 89.0%, respectively. The detection limit was 5 ng for spiramycin standard, and 0.05 ppm in chicken muscles.     

Determination of ampicillin residues in fish tissues by liquid chromatography

A liquid chromatographic (LC) method is described for determination of ampicillin residues in fish tissues. The drug is extracted from tissues with methanol, and the extract is evaporated to dryness. This residue is cleaned up by Florisil cartridge chromatography. LC analysis is carried out on a Nucleosil C18 column, and ampicillin is quantitated by ultraviolet detection at 222 nm. Recoveries of ampicillin added to tissues at levels of 0.2 and 0.1 ppm were 73.2 and 61.5%, respectively. The detection limit was 3 ng for ampicillin standard, and 0.03 ppm in tissues.     

Determination of xanthomegnin in grains and animal feeds by liquid chromatography with electrochemical detection

A sensitive, highly selective liquid chromatographic (LC) method is described which uses electrochemical (EC) reduction of the analyte in the determinative step. The method is capable of determining xanthomegnin in mixed animal feeds and grains at levels ranging from 15 to 1200 ng/g. The method can detect as little as 0.5 ng xanthomegnin injected on the LC column. Xanthomegnin is extracted with chloroform and 0.1M phosphoric acid. An aliquot of the crude extract is purified by silica gel column chromatography using a Sep-Pak silica gel cartridge. A novel feature of the method is that xanthomegnin is "backed off" the column by reversing the flow of the eluant through the column. LC is then used to separate xanthomegnin from other interfering substances. Xanthomegnin is detected by EC reduction at -0.16 V. Recoveries of xanthomegnin added to samples at levels ranging from 15 to 1200 ng/g averaged 79% with a coefficient of variation of 7.9%. Results also demonstrate that this LC system can separate the related metabolites viomellein and rubrosulphin from each other and from xanthomegnin and that the same EC detection system can be used to detect these metabolites.     

Determination of neomycin in animal tissues, using ion-pair liquid chromatography with fluorometric detection

A liquid chromatographic (LC) method is described for the determination of neomycin in animal tissues. Tissues are homogenized in 0.2M potassium phosphate buffer (pH 8.0); the homogenate is centrifuged, and the supernate is heated to precipitate the protein. The heat-deproteinated extract is acidified to pH 3.5-4 and directly analyzed by LC. The LC method consists of an ion-pairing mobile phase, a reverse phase ODS column, post-column derivatization with o-phthalaldehyde reagent, and fluorometric detection. The LC method uses paromomycin as an internal standard, and separates neomycin from streptomycin or dihydrostreptomycin because they have different retention times. The LC column separates neomycin in 25 min; the detection limit is about 3.5 ng neomycin. The overall recovery of neomycin from kidney tissues spiked at 1-30 ppm was 96% with a 9.0% coefficient of variation. The method was also applied to muscle tissue.     

Gas chromatographic determination with electron capture detection of residual ethylene oxide in intraocular lenses

A sensitive method is described to determine trace quantities of ethylene oxide (EO) in EO-sterilized intraocular lenses (IOLs). An IOL is dipped in ethanol containing 0.25 ppm propylene oxide (PO) in a 4 mL vial, 2 drops of freshly distilled hydrobromic acid is added through a septum, and the mixture is warmed at 50 degrees C for 24 h. It is then neutralized by vigorous shaking with sodium bicarbonate, dehydrated with anhydrous sodium sulfate, and filtered. The filtrate is injected into a gas chromatograph with electron-capture detection, and the peak height ratio of ethylene bromohydrin/propylene bromohydrin is measured. EO residue is calculated from the calibration curve obtained through a similar procedure with the standard EO/PO solutions. The limit of determination is 0.04 microgram/lens (ca 2.0 ppm). When EO residue levels were determined for IOLs sampled at 3 different aeration periods after sterilization, we found that 9 days of aeration was necessary to meet the U.S. Food and Drug Administration proposed limit for EO residue in IOLs.     

Determination of zeranol/zearalenone and their metabolites in edible animal tissue by liquid chromatography with electrochemical detection and confirmation by gas chromatography/mass spectrometry

A sensitive method is described for the determination and confirmation of zeranol and zearalenone, as well as their isomers and metabolites, in edible animal tissue. The analytes are extracted from tissue with methanol, hydrolyzed enzymatically, cleaned up by acid-base partitioning, determined by liquid chromatography (LC) with electrochemical (EC) detection, and confirmed by gas chromatography/mass spectrometry (GC/MS). LC analysis is performed by isocratic elution with a buffered mobile phase using a Nova-Pak reverse-phase C18 column with amperometric EC detection at +0.90 V. Capillary GC/MS analysis of the trimethylsilyl derivatives provides mass spectral confirmations.     

Problems and results of trace analysis of 2,3,7,8-tetrachlorodibenzo-p-dioxin in 2,4,5-trichlorophenoxyacetic acid and its esters

Quantitative analysis of tetrachlorodibenzo-p-dioxins (TCDDs) has gained increasing importance in the public domain. The analytical problem is complex because of the large number of interfering isomers and the extremely low limit of determination enforced by legislation. DAPA elaborated a procedure based on the latest published methods and on the existing experience of the collaborators. This procedure involves preseparation of the original sample on a silica column and cleanup by liquid chromatography (LC) on alumina. Alkaline saponification of 2,4,5-trichlorophenoxyacetic acid (2,4,5-T) esters seems to create artificial dioxins in the organic extract. Final determination is performed by capillary gas chromatography (GC)-low resolution mass spectrometry (MS). Final international collaborative work was carried out on 4 samples. Results were reported by 13 of 20 laboratories. Mean values ranged from 3.5 to 8.7 micrograms/kg. The interlaboratory reproducibilities ranged from 3.4 to 8.2 micrograms/kg (about 100% of the mean value).     

Determination of phenol in honey by liquid chromatography with amperometric detection

A sensitive, selective analytical method has been developed for determination of phenol in honey by liquid chromotography (LC) with amperometric detection (AMD). Phenol is extracted with benzene from the distillate of honey. The benzene extract is washed with 1% sodium bicarbonate solution and then reextracted with 0.1N sodium hydroxide followed by cleanup on a C18 cartridge. Phenol is determined by reverse-phase LC with amperometric detection. An Inertsil ODS column (150 X 4.6 mm, 5 microns) is used in the determination. The mobile phase is a mixture (20 + 80 v/v) of acetonitrile and 0.01M sodium dihydrogen phosphate containing 2mM ethylenediaminetetraacetic acid, disodium salt (EDTA) with the pH adjusted to 5.0. The flow rate is 1 mL/min under ambient conditions. The applied potential of the AMD using a glassy carbon electrode is 0.7 V vs an Ag/AgCl reference electrode. Average recoveries of phenol added to honey were 79.8% at 0.01 ppm spiking level, 90.4% at 0.1 ppm, and 91.0% at 1.0 ppm. Repeatabilities were 3.4, 1.3, and 1.8%, respectively. The detection limit of phenol in honey was 0.002 ppm. For analysis of 112 commercial honey samples, the range and average values of 32 detected samples were 0.05-5.88 ppm and 0.71 ppm, respectively.     

Analysis of flonicamid and its metabolites in dried hops by liquid chromatography-tandem mass spectrometry

An analytical method was developed for the determination of the neo-nicotinoid insecticide flonicamid ( N-cyanomethyl-4-trifluoromethylnicotinamide) and its metabolites N-(4-trifluoronicotinoyl) glycine (TFNG), 4-trifluoronicotinic acid (TFNA), and 4-trifluoromethylnicotinamide (TFNA-AM) in dried hops. The method utilized C18 and polymeric solid phase extraction (SPE) column cleanups, liquid-liquid partitioning, and liquid chromatography (LC) with mass spectrometry (MS/MS). Method validation and concurrent recoveries from untreated dried hops ranged from 66 to 119% for all compounds over five levels of fortification (0.005, 0.02, 0.2, 2.0, and 4.0 ppm). Flonicamid-treated hop samples collected from three field sites had the following residues: flonicamid levels of 0.561-2.85 ppm, TFNA levels of 0.302-0.470 ppm, TFNA-AM levels of 0.038-0.177 ppm, and TFNG levels of 0.098-0.204 ppm. Untreated hop samples from all fields had residues <0.005 ppm for flonicamid, TFNA, TFNA-AM, and TFNG. The limit of quantitation and limit of detection for all compounds were 0.005 and 0.0025 ppm, respectively.     

Determination of maduramicin by liquid chromatography with atomic absorption spectrometric detection

A liquid chromatograph was interfaced to an atomic absorption spectrometer for the detection and quantitation of maduramicin in feed matrixes at the 1-8 ppm level. Ionophores in general form strong 1:1 products with various metal cations, yielding complexes that are insoluble in water but very soluble in organic solvents. Maduramicin, a carboxylic, polyalcohol, polyether antibiotic, is labeled with the sodium cation and analyzed by atomic absorption spectroscopy (AAS). The lower limit of detection is approximately 100-200 ng maduramicin sodium salt. Feeds containing 1-8 ppm maduramicin are extracted with acetone, the extract is passed through an alumina column, the column is eluted with acetonitrile-water (90 + 10), and the eluate is analyzed for maduramicin by liquid chromatography-AAS after concentration and conversion of maduramicin to the sodium salt. Recoveries of maduramicin averaged 89.5%. Liquid chromatography with AAS detection has been shown to be a sensitive and highly specific technique for the determination of ionophores in general and maduramicin in particular.     

Application of a tandem mass spectrometer and core-shell particle column for the determination of 151 pesticides in grains

A comparison of ultrahigh performance liquid chromatography (UHPLC) with a 2.6 μm core-shell particle column (Kinetex C(18)) and conventional liquid chromatography (LC) with a 3 μm porous particle column (Atlantis dC(18)), coupled with electrospray ionization tandem mass spectrometry (ESI-MS/MS), for the determination of 151 pesticides in grains is presented in this study. Pesticides were extracted from grain samples using a procedure known as QuEChERS (quick, easy, cheap, effective, rugged, and safe). Quantification, with an analytical range from 5 to 500 μg/kg, was achieved using matrix-matched standard calibration curves with isotopically labeled standards or a chemical analogue as internal standards. The method performance parameters that included overall recovery, intermediate precision, and measurement uncertainty were evaluated using a designed experiment, that is, the nested design. The UHPLC (Kinetex C(18)) was superior to conventional LC (Atlantis dC(18)) as it yielded a shorter analytical run time, increased method sensitivity, and improved method performance. For UHPLC/ESI-MS/MS (Kinetex C(18)), 90% of the pesticides studied had recoveries between 81 and 110%, 88% of the pesticides had intermediate precision ≤20%, and 84% of the pesticides showed measurement uncertainty ≤40%. As compared to UHPLC/ESI-MS/MS (Kinetex dC(18)), the LC/ESI-MS/MS (Atlantis dC(18)) showed a relatively lower sensitivity, less repeatability, and larger measurement uncertainty. UHPLC/ESI-MS/MS with 2.6 μm core-shell particle column and scheduled MRM proved to be a good choice for quantification or determination of pesticides in grains.     

High-performance liquid chromatographic determination of strychnine in grain baits.l.

A simple and rapid high-performance liquid chromatographic procedure is described for the determination of strychnine. Grain baits containing strychnine alkaloid are ground, mixed, and extracted by shaking with chloroform. Without further cleanup, extract filtrates are injected directly into a liquid chromatograph. Chromatography is complete within 7 min and peak heights are used for quantitation. Separations were made on a 30 cm times 4 mm id stainless steel column packed with mu Porasil (8-12 mum silica). The eluting solvent was methanol-chloroform (10+90) at a flow rate of 2.0 ml/min. Recovery of spiked samples ranged from 91.5 to 95.2%. Confirmation of strychnine from a commercial sample was made by high resolution mass spectrometry with mass agreement to 1.2 ppm.     

Evaluation of a method for assaying sulfonamide antimicrobial residues in cheese: hot-water extraction and liquid chromatography-tandem mass spectrometry

Several sulfonamide antimicrobials (SAAs) are largely used in veterinary medicine. A rapid, specific, and sensitive procedure for determining 12 SAAs in cheese is presented. The method is based on the matrix solid-phase dispersion technique followed by liquid chromatography (LC)-tandem mass spectrometry (MS) equipped with an electrospray ion source. Target compounds were extracted from Mozzarella, Asiago, Parmigiano, Emmenthal, and Camembert cheese samples by 6 mL of water modified with 10% methanol and heated at 120 degrees C. The addition of methanol to hot water served to improve remarkably extraction yields of the most lipophilic SAAs, that is, sulfadimethoxine and sulfaquinoxaline. After acidification and filtration, 100 microL of the aqueous extract was injected in the LC column. MS data acquisition was performed in the multireaction monitoring mode, selecting two precursor-to-product ion transitions for each target compound. Methanol-modified hot water appeared to be an efficient extractant, because absolute recovery ranged between 67 and 88%. Using sulfamoxole as surrogate analyte, recovery of the 12 analytes spiked in the five types of cheese considered at the 50 ng/g level ranged between 75 and 105% with RSD not higher than 11%. Statistical analysis of the mean recovery data showed that the extraction efficiency was not affected by the type of cheese analyzed. This result indicates this method could be applied to other cheese types not considered here. The accuracy of the method was determined at three spike levels, that is, 20, 50, and 100 ng/g, and varied between 73 and 102% with relative standard deviations ranging between 4 and 12%. On the basis of a signal-to-noise ratio of 10, limits of quantification were estimated to be <1 ng/g.     

Mass spectral investigations on trichothecene mycotoxins. II. Detection and quantitation of macrocyclic trichothecenes by gas chromatography/negative ion chemical ionization mass spectrometry

A general, sensitive gas chromatographic/negative ion chemical ionization mass spectrometric (GC/NICIMS) method of analysis was developed for the detection and quantitation of several polar, thermally labile, toxic macrocyclic trichothecenes. The procedure involves the conversion of the molecules to their corresponding alcohols (verrucarols) by alkaline hydrolysis, followed by derivatization of the hydrolysate with heptafluorobutyrylimidazole and analysis by GC/MS technique under negative ion chemical ionization conditions. Nanogram (250 ng) quantities of several macrocyclic trichothecenes with different verrucarol and ester moieties were analyzed successfully with good precision by this procedure. The method was applicable for the accurate determination of at least low ppb levels of these macrocyclic trichothecenes in environmental samples, such as fungal products, fermentation broths, and plant samples. This is the first reported, well developed, sensitive, and applicable method for the detection and quantitation of these compounds in naturally occurring samples.