In vitro starch digestibility and predicted glycaemic indexes of buckwheat,oat, quinoa,sorghum, teff and commercial gluten-free bread

The in vitro starch digestibility of five gluten-free breads (from buckwheat, oat, quinoa, sorghum or teff flour) was analysed using a multi-enzyme dialysis system. Hydrolysis indexes (HI) and predicted glycaemic indexes (pGI) were calculated from the area under the curve (AUC; g RSR/100g TAC*min) of reducing sugars released (RSR), and related to that of white wheat bread. Total available carbohydrates (TAC; mg/4 g bread “as eaten”) were highest in sorghum (1634 mg) and oat bread (1384 mg). The AUC was highest for quinoa (3260 g RSR), followed by buckwheat (2377 g RSR) and teff bread (2026 g RSR). Quinoa bread showed highest predicted GI (95). GIs of buckwheat (GI 80), teff (74), sorghum (72) and oat (71) breads were significantly lower. Significantly higher gelatinization temperatures in teff (71 °C) and sorghum flour (69 °C) as determined by differential scanning calorimetry (DSC) correlated with lower pGIs (74 and 72). Larger granule diameters in oat (3–10 μm) and sorghum (6–18 μm) in comparison to quinoa (1.3 μm) and buckwheat flour (3–7 μm) as assessed with scanning electron microscopy resulted in lower specific surface area of starch granules. The data is in agreement with predictions that smaller starch granules result in a higher GI.     

Effect of wheat bran addition on in vitro starch digestibility,physico-mechanical and sensory properties of biscuits

Biscuits contain high amount of fat and sugar thus having high calorie but low nutrient density. Wheat bran is a good source of dietary fibre (DF) and protein and is thus a good candidate for nutritional enrichment of cereal foods. The aim of this study was to understand the effect of bran incorporation and particle size reduction on biscuit microstructure, texture and in vitro starch digestibility. Five different biscuits containing 5–15% DF were produced. Two different particle sized wheat brans were used: coarse (450 μm) and fine (68 μm). Bran particle size reduction increased the elastic modulus and hardness of biscuits. Biscuits containing fine bran had visually more compact structure without any surface or internal defects than those with coarse bran. Fine bran containing sample had the highest hardness value. Sensory evaluation showed that roughness and breakdown of biscuits in the mouth was significant for the coarse bran with highest level of bran addition. The instrumental elastic modulus, stress and hardness were closely related to sensory hardness and strength to break. Increasing DF content from 5 to 15% increased hydrolysis index by 16%, from 32 to 37.     

Enhancement of the pasting properties of teff and maize starches through wet–heat processing with added stearic acid

This study determined the effects of stearic acid on the functional properties of teff starch, a compound granule starch in comparison to maize, a simple type granule starch. Stearic acid was incorporated into teff and maize starches and pasted (held for 5 or 120 min at 91 °C) with an RVA (Rapid Visco Analyser). Teff starch with added stearic acid (0.25 and 1.5% starch basis) did not produce a pasting peak viscosity within short holding time (5 min) compared to maize starch. The paste viscosity of both teff and maize starches with stearic acid increased by about three times with long pasting (120 min). This increase in paste viscosity occurred earlier for teff starch than maize starch. Teff starch with stearic acid was more viscous and was non-gelling. Confocal laser scanning microscopy showed that stearic acid did not diffuse in teff starch granules, but seemed to coat them. However, stearic acid diffused inside maize starch granules through channels. This microstructural difference may explain the different pasting behavior. The early high paste viscosity and non-gelling properties of the teff starch modified with stearic acid could have promising applications in foods, for example better mouthfeel with lower starch concentration.     

Potential use of exogenous lipases for DATEM replacement to modify the rheological and thermal properties of wheat flour dough

The effect of two lipases and DATEM at different concentrations on the rheological and thermal properties of white and whole wheat flour doughs was determined by farinograph, extensograph, texture analyzer and differential scanning calorimetry. Lipases provided similar or better results than that of DATEM on decreasing softening degree and stickiness, and increasing stability, maximum resistance to extension and hardness. Extensibility and energy did not change with lipases, but decreased with DATEM. Lipases and DATEM slightly modified the transition temperatures and enthalpies of ice-melting and starch gelatinization, but significantly increased the moisture and unfrozen water contents, and decreased the solid concentration in unfrozen water. The greatest effect of lipases was observed on decreasing the peak temperature and increasing the enthalpy of amylose–lipid complex dissociation. The changes in the rheological and thermal properties were almost independent of the concentration levels tested, and were mostly reduced when whole wheat flour was used. The improvement in the dough properties by lipases is possibly related to the in situ formation of surface active compounds from endogenous flour lipids. Presumably, these compounds are already located in the right positions in dough, where they might have higher interaction potentials than DATEM with the dough components.     

In vitro starch digestibility,degree of gelatinization and functional properties of twin screw prepared cereal-legume pasta

The investigation explores the possibility of utilizing legume flour (pigeon pea:10–30%) and brown rice flour (35–45%) for production of pasta using twin screw extruder. RSM was used to analyse the effect of feed moisture (28–36%), barrel temperature (70–110 °C) and legume:brown rice ratio on quality responses (in vitro starch and protein digestibility, degree of starch gelatinization, cooking quality, pasting properties, color and textural properties) of pasta. Extrusion processing significantly enhanced in vitro starch and protein digestibility of prepared pasta. The in vitro starch and protein digestibility of pasta ranged between 15.00 and 26.77 g/100 g and 50.34–84.82 g/100 g respectively. Addition of brown rice flour and pigeon pea flour exhibited dominating positive effect on cooking quality of the pasta. Degree of gelatinization of prepared pasta was found in range of 52.13–90.10 per cent. Color characteristics viz. luminosity, redness and yellowness of pasta enhanced with feed moisture. Pasting properties revealed lower peak and final viscosity at higher processing conditions. Firmness of cooked pasta elevated with an increase in the barrel temperature. Acceptability score of health based pasta on the basis of sensory attributes was 8 as inferred from 9 point hedonic scale.     

In vitro starch digestibility and pasting properties of germinated brown rice after hydrothermal treatments

Germinated brown rice (GBR) recently has received renewed attention due to its enhanced nutritional value. Pasting properties and in vitro starch digestibility of GBR were examined before and after hydrothermal treatments. Steeping in water (30 °C, 24 h) raised the moisture content and germination percentage of brown rice. Pasting viscosity was substantially decreased but gelatinization temperatures and enthalpy were decreased only marginally by germination (30 °C, 48 h). However, annealing (50 °C, 24 h) and heat-moisture treatment (100 °C, 1 h at 30% moisture) after germination resulted in increased pasting viscosity and gelatinization temperatures. The hydrothermal treatments, however, induced browning reactions to darken the flour of GBR. The digestibility of starch in brown rice was increased by germination. The contents of rapidly digestible starch (RDS), slowly digestible starch (SDS) and resistant starch (RS) in the cooked brown rice were 47.3%, 40.8%, and 11.9%, respectively, but changed to 57.7%, 39.1%, and 3.2%, respectively upon germination. The hydrothermal treatments, however, decreased the digestibility of starch in GBR. The heat-moisture treatment decreased the RDS content in GBR near to that of native brown rice. The digestibility and physical properties of brown rice can be controlled by germination and hydrothermal treatments.     

Influence of baking and in vitro digestion on steryl ferulates from wheat

So far, data on absorption and metabolism of steryl ferulates from edible sources is scarce. Therefore, the impact of enzyme-aided baking and in vitro digestion was examined in this study. Wheat flours and wheat breads were subjected to a static in vitro digestion model and changes in the contents of steryl ferulates and free sterols (possible hydrolysis products of steryl ferulates) were monitored. Baking degraded steryl ferulates at a similar rate in all types of breads (43–47%) compared to the corresponding flours, while baking induced changes in free sterols showed no clear pattern. In vitro digestion provoked five folds lower content of steryl ferulates in flours than in breads and it also resulted in significant free sterol accumulation. Interestingly, bioaccessibility (0.01–0.25%) was not influenced by the cereal matrix. The four steryl ferulate species, which were detected in wheat, showed similar hydrolysis rates during digestion. As baking had a significant impact on the steryl ferulate content of wheat, we suggest that both raw and processed sources should be considered further in vitro, animal or human trials, when studying the metabolic fate of steryl ferulates.     

Towards the understanding of bread-making quality in organically grown wheat: Dough mixing behaviour,protein polymerisation and structural properties

Achieving high quality of organic bread is a major objective of organic wheat production. The aim of the present study was to understand the mechanisms related to bread-making quality in organically grown wheat genotypes from a diverse background. Fifty one organically grown winter and spring wheat genotypes were evaluated for percentage of unextractable polymeric proteins in total polymeric proteins (%UPP) in flour and dough, mixing behaviour and structural properties. The results showed a large variation in genotypes for %UPP in flour, changes in %UPP at mixing, mixing parameters and structural properties. Genotypes with high %UPP in flour and low change in %UPP at optimum mixing were; Agron, Hjelmqvist 6357 blå and Effrada. The light microscopy (LM) and confocal laser scanning microscopy (CLSM) results confirmed that genotypes with high %UPP in flour and a low change at optimal mixing resulted in a more extended protein network (continuous and interconnected) at mixing as compared to the other genotypes. Genotypes with good mixing properties as to the mixograph analyses were; Diamant ax, Lantvete Gotland 4496 spelt, Erbe brun and Jacoby 59. The present study shows the presence of opportunities to select genotypes suitable for cultivation and breeding of bread wheat for organic production.     

In vitro starch digestibility and predicted glycaemic indexes of buckwheat,oat, quinoa,sorghum, teff and commercial gluten-free bread

The in vitro starch digestibility of five gluten-free breads (from buckwheat, oat, quinoa, sorghum or teff flour) was analysed using a multi-enzyme dialysis system. Hydrolysis indexes (HI) and predicted glycaemic indexes (pGI) were calculated from the area under the curve (AUC; g RSR/100g TAC*min) of reducing sugars released (RSR), and related to that of white wheat bread. Total available carbohydrates (TAC; mg/4 g bread “as eaten”) were highest in sorghum (1634 mg) and oat bread (1384 mg). The AUC was highest for quinoa (3260 g RSR), followed by buckwheat (2377 g RSR) and teff bread (2026 g RSR). Quinoa bread showed highest predicted GI (95). GIs of buckwheat (GI 80), teff (74), sorghum (72) and oat (71) breads were significantly lower. Significantly higher gelatinization temperatures in teff (71 °C) and sorghum flour (69 °C) as determined by differential scanning calorimetry (DSC) correlated with lower pGIs (74 and 72). Larger granule diameters in oat (3–10 μm) and sorghum (6–18 μm) in comparison to quinoa (1.3 μm) and buckwheat flour (3–7 μm) as assessed with scanning electron microscopy resulted in lower specific surface area of starch granules. The data is in agreement with predictions that smaller starch granules result in a higher GI.     

Modification of physicochemical properties and in vitro digestibility of wheat flour through superheated steam processing

Native and moistened wheat flours (moisture contents were 13.5 and 27.0%, respectively) were treated with superheated steam (SS) at different temperatures (140 and 170 °C) and times (1, 2 and 4 min). Their physicochemical and digestive properties were analyzed. For native flour, SS treatment altered the starch molecular structure and behavior slightly. While for moistened flour, crystalline degree, gelatinization enthalpy, amylose leaching (AML) and falling number significantly decreased, but thermal transition temperatures increased with the rise of treating severity. Clumping of starch granules, aggregation of proteins and formation of amylose-lipid complexes occurred in both native and moistened flours. Broader pasting temperature ranges and higher viscosities were found on SS-modified flours. Additionally, SS treatment on moistened flours increased resistant and slowly digestible starch contents. In general, SS treatment induced changes in starch molecular structure and reactions among flour components leading to more stable structures, thus affecting their pasting behavior, thermal properties and in vitro digestion.     

Influence of citric acid and water on thermoplastic wheat flour/poly(lactic acid) blends. I: Thermal, mechanical and morphological properties

Wheat flour was plasticized with glycerol and compounded with poly(lactic acid) in a one-step twin-screw extrusion process in the presence of citric acid with or without extra water. The influence of these additives on process parameters and thermal, mechanical and morphological properties of injected samples from the prepared blends, was then studied.Citric acid acted as a compatibilizer by promoting depolymerization of both starch and PLA. For an extrusion without extra water, the amount of citric acid (2 parts for 75 parts of flour, 25 parts of PLA and 15 parts of glycerol) has to be limited to avoid mechanical properties degradation. Water, added during the extrusion, improved the whole process, minimizing PLA depolymerization, favoring starch plasticization by citric acid and thus improving phases repartition.     

Modification of protein structure and dough rheological properties of wheat flour through superheated steam treatment

Native (NF, 13.5% w.b) and moistened (MF, 27% w.b) wheat flours were treated with superheated steam (SS) at 170 °C for 1, 2 and 4 min, and their protein structure as well as dough rheological properties were analyzed. Confocal laser scanning microscopy (CLSM) and SDS-PAGE patterns indicated the formation of protein aggregates with reduced SDS extractability after treatment. Farinograph and dynamic rheometry measurements showed that the strength as well as elastic and viscous moduli of the dough made from SS-treated flours progressively increased with SS treatment time. And both the improvements were more pronounced for superheated steam-treated moistened flours (SS-MF) than for superheated steam-treated native flours (SS-NF). Size-exclusion high performance liquid chromatography (SE-HPLC) analysis demonstrated that dough rheological parameters have positive correlations with SDS unextractable polymeric proteins (UPP) contents. SS treatment on flours led to a transition of protein secondary structures to more ordered form (α-helix and β-sheet). Additionally, free sulfhydryl (SH) contents decreased after treatment, which implied that disulfide bonds accounted for protein extractability loss and dough rheological properties improvement. Elevated moisture level promoted the modification of both protein structure and dough behaviors of flours during SS treatment.     

Suitability of tef varieties in mixed wheat flour bread matrices: A physico-chemical and nutritional approach

Wheat flour replacement from 0 to 40% by single tef flours from three Ethiopian varieties DZ-01-99 (brown grain tef), DZ-Cr-37 (white grain tef) and DZ-Cr-387 (Quncho, white grain tef) yielded a technologically viable ciabatta type composite bread with acceptable sensory properties and enhanced nutritional value, as compared to 100% refined wheat flour. Incorporation of tef flour from 30% to 40% imparted discreet negative effects in terms of decreased loaf volume and crumb resilience, and increase of crumb hardness in brown tef blended breads. Increment of crumb hardness on aging was in general much lower in tef blended breads compared to wheat bread counterparts, revealing slower firming kinetics, especially for brown tef blended breads. Blended breads with 40% white tef exhibited similar extent and variable rate of retrogradation kinetics along storage, while brown tef-blended breads retrograded slower but in higher extent than control wheat flour breads. Breads that contains 40% tef grain flour were found to contain five folds (DZ-01-99, DZ-Cr-387) to 10 folds (DZ-Cr-37) Fe, three folds Mn, twice Cu, Zn and Mg, and 1.5 times Ca, K, and P contents as compared to the contents found in 100% refined wheat grain flour breads. In addition, suitable dietary trends for lower rapidly digestible starch and starch digestion rate index were met from tef grain flour fortified breads.