An analysis of the persistence and potency of film‐coated seed protectant as influenced by various storage parameters

BACKGROUND: An efficient delivery system for seed‐protectant chemicals is needed in light of several disadvantages of conventional seed treatment methods. This study evaluates the efficacy of film‐coat application in maintaining the persistence and potency of imidacloprid on Lycopersicon esculentum (L.) Mill. seeds after simultaneous storage under ambient and regulated environment in paper and aluminium packages. RESULTS: High‐performance liquid chromatography (HPLC) revealed 0.135 mg kg^?1 of herbage material to be the threshold value beyond which absolute control was obtained, and with film coating the latter was achieved even with half‐dosage seed treatment, irrespective of the storage condition. The technique provided early protection to the crop and also nullified the deleterious effects of ambient storage on the persistence and potency of the pesticide. CONCLUSION: Film coating enabled superior pesticide dosage as well as higher biological efficacy to be achieved. Hence, in addition to being an ecofriendly alternative, the technique would be a more economically viable option for storage of treated seeds. Copyright © 2009 Society of Chemical Industry     

Mycelial growth rate and toxin production in the seed pathogen Pyrenophora semeniperda: resource trade‐offs and temporally varying selection

Pyrenophora semeniperda, an important pathogen in Bromus tectorum seed banks in semi‐arid western North America, exhibits >4‐fold variation in mycelial growth rate. Host seeds exhibit seasonal changes in dormancy that affect the risk of pathogen‐caused mortality. The hypothesis tested is that contrasting seed dormancy phenotypes select for contrasting strategies for increasing pathogen fitness, and that increased fitness on nondormant seeds involves a resource trade‐off between toxin production and growth. The strategy for successfully attacking rapidly germinating nondormant seeds at high inoculum loads in autumn involves increased post‐infection aggressiveness to prevent seed escape through germination. An earlier study demonstrated that slow‐growing strains caused higher mortality than faster‐growing strains on nondormant host seeds at high inoculum loads. In this study, production of the toxin cytochalasin B was significantly higher in slower‐growing strains, and was induced only in seeds or in seed‐constituent‐containing media. Its production was reduced in vivo by Bromus tectorum seeds, suggesting direct involvement in pathogenesis on seeds. Fast‐growing strains caused significantly higher mortality than slow‐growing strains at low inoculum loads on dormant seeds, which apparently have resistance that is overcome at high loads or through rapid mycelial proliferation. In a co‐inoculation study, the fast‐growing isolate produced 3 × more stromata than the slow‐growing isolate on dormant seeds, whereas the slow‐growing isolate was twice as successful on nondormant seeds. These results provide evidence that mycelial growth rate variation and associated variation in cytochalasin B production represent a trade‐off maintained through temporally varying selection resulting from seasonal variation in host seed dormancy status.     

Pesticide‐laden dust emission and drift from treated seeds during seed drilling: a review

Dressing seeds with pesticides to control pests is a widespread practice with important advantages. Recent incidents of bee losses, however, have directed attention to the emission of abraded pesticide‐coated seed particles to the environment during sowing. This phenomenon of drift of pesticide dust can lead to pesticide contamination of air, water and other natural resources in crop‐growing areas. This review article presents the state of the art of the phenomenon of dust emission and drift from pesticide seed dressing during sowing and its consequences. Firstly, pesticide seed treatment is defined and its pros and cons are set out, with the focus on dust, dust emission and dust drift from pesticide‐coated seed. The factors affecting emission of pesticide dust (e.g. seed treatment quality, seed drilling technology and environmental conditions) are considered, along with its possible effects. The measuring techniques and protocols and models currently in use for calculating the behaviour of dust are reviewed, together with their features and limitations. Finally, possible mitigation measures are discussed, such as improving the seed quality and the use of modified seed drilling technology, and an overview of regulations and stewardship activities is given. © 2013 Society of Chemical Industry     

Contaminant seeds in imported crop seed lots: a non‐negligible human‐mediated pathway for introduction of plant species to islands

Contaminant seeds in crop seed lots constitute a pathway for plant species introduction into new areas, and these non‐native weeds may be an environmental problem if they become invasive. Seed certification is a process that regulates and guarantees the quality of seed lots, including their purity. In this study, we assessed weed contamination in certified and non‐certified seed lots (n = 116) from 12 crop species commonly cultivated in the Balearic Islands. Contaminant seeds were separated using sieves, and then manually under a stereomicroscope, before they were germinated to confirm taxonomic identity. Weight, number and diversity of the contaminant seeds per kilogram of seed lot, number released per hectare according to sowing rate, and taxonomic identity and biogeographical origin of contaminant species were recorded. Although certification reduced the number of contaminant seeds in the seed lots, it did not entirely eliminate contaminants, because we found up to 2000 contaminant seeds kg^?1 of certified ryegrass and sulla. Overall, contaminant seeds represented 118 taxa; of which, 82 were identified to species level, 70% of species were native, 19% were cultivated, and 11% were non‐native. Two of the identified taxa were first records for the Balearic Islands. In conclusion, contaminant seeds in imported crop seed lots represent a non‐negligible pathway for plant species introduction.     

Enhanced weed‐crop competition effects on growth and seed production of herbicide‐resistant and herbicide‐susceptible annual sowthistle (Sonchus oleraceus)

Enhanced crop competition could aid in the management of annual sowthistle (Sonchus oleraceus L.), a dominant weed of Australian cropping systems. A two‐year pot study was conducted to evaluate the effect of wheat (Triticum aestivum L.) planting densities (0, 82, and 164 wheat plants/m²) on growth and seed production of glyphosate‐resistant (GR) and glyphosate‐susceptible (GS) biotypes of annual sowthistle. Without competition, both biotypes produced a similar number of leaves and biomass, but the GS biotype produced 80% more seeds (46,050 per plant) than the GR biotype. In competition with 164 wheat plants/m², the number of leaves in the GR and GS biotypes was reduced by 62 and 61%, respectively, in comparison with the no‐competition treatment, and similarly, weed biomass was reduced by 78 and 77%, respectively. Compared to no‐competition treatment, the seed production of GR and GS biotypes was reduced by 33 and 69%, respectively, when grown with 82 wheat plants/m², but increasing wheat density from 82 to 164 plants/m² reduced the number of seeds only in the GS biotype (81%). Both biotypes produced greater than 6,000 seeds per plant when grown in competition with 164 plants/m², suggesting that increased crop density should be integrated with other weed management strategies for efficient control of annual sowthistle.     

Contribution of militarine and dactylorhin A to the plant growth‐inhibitory activity of a weed‐suppressing orchid,Bletilla striata

The methanol extract of Bletilla striata, an ornamental orchid in eastern Asia, exhibited plant growth‐inhibitory activity. It was purified by continuous chromatography, based on the inhibitory activity against the growth of lettuce seedlings, resulting in two glycosidic compounds, militarine and dactylorhin A. The EC₅₀ values of militarine and dactylorhin A against the radicle elongation of the lettuce seedlings were 0.28 and 0.88 mmol L^?1, respectively. The amount of militarine and dactylorhin A in the methanol extract of the aerial part of B. striata was calculated to be 5.6 and 7.5 mg g^?1 fresh weight, respectively. The inhibitory activity of militarine and its content in the methanol extract revealed that the plant growth‐inhibitory activity of the extract of B. striata was mainly related to militarine. The inhibitory activity of militarine against the growth of Italian ryegrass and timothy were of the same level as that of lettuce.     

Effect of adjuvants on the rainfastness and performance of tribenuron‐methyl on broad‐leaved weeds

The influence of a non‐ionic surfactant (20% isodecyl alcohol ethoxylate plus 0.7% silicone surfactants), an anionic surfactant (25.5% alkylethersulfate sodium salt), and a vegetable oil (95% natural rapeseed oil with 5% compound emulsifiers) on the performance and rainfastness of a new commercial formulation of tribenuron‐methyl was assessed on four broad‐leaved weeds: wild mustard (Sinapis arvensis), scentless mayweed (Tripleurospermum inodorum), common poppy (Papaver rhoeas), and common lambsquarters (Chenopodium album). In one experiment, six doses of tribenuron‐methyl alone or in a mixture with each of the three adjuvants were applied to each weed species at two different leaf stages. In another experiment, the plants of T. inodorum were sprayed and subsequently subjected to 3 mm of rain at 1, 2, and 4 h after treatment (HAT). The activity of tribenuron‐methyl was significantly enhanced by all the adjuvants on all the weed species and only minor differences were observed among the tested adjuvants. The impact of the adjuvants varied among the weed species and growth stages. The highest response to the inclusion of adjuvants in the spray liquid was found at the late growth stage and on C. album, followed by P. rhoeas and T. inodorum, while S. arvensis was less responsive to the adjuvants. All the adjuvants significantly improved the rainfastness of tribenuron‐methyl on T. inodorum, with differences among the adjuvants being more pronounced when rain occurred shortly after herbicide application. The effect of the vegetable oil on tribenuron‐methyl's rainfastness was significantly lower than that of the surfactants with rain at 1 HAT, while no significant differences among the three adjuvants were observed when rain occurred at 2 and 4 HAT.     

Eleven years of integrated weed management: long‐term impacts of row spacing and harvest weed seed destruction on Lolium rigidum control

Long‐term research aimed to determine whether narrow row spacing and harvest weed seed destruction, in combination with herbicide use, would be sufficient to drive a Lolium rigidum population to extinction. A trial was run from 1987 to 2013, with treatments including crop row spacings of 9, 18, 27 or 36 cm and crop residue burning or retention. Herbicides were applied to reflect regional practices. The initial trial design was randomised, but treatments were maintained in each plot over the following years. Lolium rigidum seed production at harvest was assessed from 2003 to 2013. Average crop yield was higher in the unburnt plots (1638 kg ha^?1) than the burnt plots (1530 kg ha^?1) and greater at narrow row spacing, with an average yield of 1658, 1637, 1548 and 1492 kg ha^?1 in the 9‐, 18‐, 27‐ and 36‐cm spacings. Lolium rigidum seed at harvest was reduced in the burnt plots (57 seeds m^?2) compared with the unburnt plots (297 seeds m^?2) and was reduced at narrow row spacing, with an average of 58, 78, 223 and 333 seeds m^?2 in the 9‐, 18‐, 27‐ and 36‐cm row spacings. By 2013, L. rigidum seed production was reduced to an average of 0 seeds m^?2 in the narrow row spacing, burnt plots.