THE OVERLAPPING DECOMPOSITION DECENTRALIZED CONTRAL FOR GENERATOR''S EXCITER/GOVERNOR SYSTEMS

In this paper the generator's exciter/governor system are decomposed by using the overlapping decomposition method, and an overlapping decomposition decentralized control (ODDC) system is designed for the exciter /governor systems. In or.dar to enhance the dynamic qualities of the decentralized control system, the concept of the second feedback system is introduced to modify the first feedback gain matrix on the condition of the structure of the original decentralized control system maintaining unchanged. The practical decentralized control system design and its; simulation results show that this method greatly improves the control effect of the ODDC system and also holds all the advantages of the ODDC system. Besides, this paper indicates that it is a simple and effective method to control excitor/governor system by overlapping decomposition decentralized control strategy.     

INVESTIGATION OF DEVELOPMENT SYSTEM OF 1802 MICROCOMPUTER

Based on general concepts of microcomputer developmentsystem,the design concept and main characteristics of 1802 microcomputerdevelopment system are introduced in this paper.This system is ratio-nally designed,powerful in function and very useful for further develo-pment and application of 1802 host computer in communication.     

DIGITAL POWER SYSTEM STABILIZER ( DPSS )

A digital power system stabilizer ( DPSS ) and its design method are presented in this paper. The mathematical model of a single machine infinite bus power system is obtained using off-line parameter identifications, and on the base of the identified model the control system is synthesized by generalized minimum variance control principles. Through feedback combination of several signals this control system has double functions of damping low frequency oscillation and automatic voltage regulating. In order to avoid static errors the very effective way is to combine discrete generalized minimum variance control with continuous integral control. Besides the proposed control strategy is very simple in structures and very easy to realize. Simulation results under several cases have shown the correctness and effectiveness of the proposed control strategy.     

The Active DC Filter Based on Hysteresis Controller on the DC Side of HVDC

For Passive Active Hybrid filtering system on the DC side of HVDC system, the controller based on Hysteresis method is presented, and the corresponding control circuits are also designed in this paper. Simulation results show very fast dynamic response and excellent compensating performance by using the proposed controller and the designed circuits.     

OPTIMIZATION DESIGN OF ADVANCED CORRECTION OF THE CONTROL SYSTEM BY A PASSIVE NETWORK

Optimization design of correction of the control systemby a passive network is studied in this paper.The design method guan-rantees collocation of a closed loop pole in a desired position,but alsominimizes the gain of the system amplifier,thus making the technicalrealization of the system easier.The design method is proved in thepaper.     

Optimization of a web based query system for a magnesium alloy database

Based on an existing magnesium alloy database, a query system is optimized by considering the design characteristics, and an integrated query system for this magnesium alloy database is developed to meet the demands of more users. The result shows that the new system improves the query efficiency of the magnesium alloy database, especially for queries concerning phase diagrams and the structure of magnesium alloys. This means that the new system provides users a more powerful and useful magnesium alloy database.     

AGGREGATION METHOD AND ITS APPLICATION IN SYSTEM DESIGN

A new aggregation method for order reduction of linear continuous or discrete systems is proposed in this paper. This method is easy for system design and it makes the structure of the controller and the state observer simple. It also reduces the computation of the system design.     

Open motion control architecture of wind turbineand main controller design

In this paper, we propose a method to solve the problems with stochastic nonlinear and point to point architecture of the wind turbines. The proposed method presents an open motion control architecture and a linearized torque control system based on power curve LUT. We reference the PLCopen motion control standard that is used to design the linearized torque and pitch systems of the wind turbines. This proposes a new methodology for the main controller design and the system integration of wind turbines.     

A General Program for Transforming an Arbitrary Polynominal Matrix into Smith's Canonical Form and Its Application

To analyze and design multivariable control system by modern frequency domain method, there should be a transformation of an arbitrary polynominal matrix into Smith's canonical form. This paper discusses the treating method and technique in programming and gives a N-S flow diagram of program to transform an arbitrary polynominal matrix into Smith's canonical form. Two transformed and applied examples show, that the program is correct, simple, useful and has good suitability. It is applicable to frequency-domain analysis and design of multivariable system.     

A SYSTEMATIC EVALUATION METHOD BUILDING DESIGN PLAN

This paper discusses the evaluation method of building design plan with the view of systematization and presents factors concerning building design plan. According to characteristics of multifactor, multipurpose, multifunction and multi-administrative levels in building design system, this comprehensive evaluation method provides a scientific basis for policymakers.     

Design Method of a Metal V-belt CVT Hydraulic System

The design method on the hydraulic control system is one of the key technologies of a metal V-belt continuously variable transmission(CVT).It can change the ratio of the transmission system by adjusting the pushing force of the pulley.By analyzing the structure characteristics and force relations,the design method of an important parameter of the CVT hydraulic system and the rate of transmission ratio,are put forward by simulating to the emblematical driving models.The structure parameters of the hydraulic system is gotten and validated by simulation on specific driving model.An effective design method is provided to develop the continuously variable transmission system.     

SERIES-PARALLEL CORRECTION AND CAA FOR CANONICAL SYSTEM TYPE 2

This paper presents a simple and efficient engineering design method of series-parallel correction for canonical system type 2 and gives a practical design example.The following and anti-disturbance performances of the system by means of digital simulation are analyzed.The performance indexes in different design parameters are listed.This paper is available for reference in engineerng design.     

OPTIMAL REACTIVE POWER FLOW BY SENSITIVITY METHOD

A new approach based on sensitivity method for the optimal power flow is presented in the paper. This method has the following advantages: it is suitable to solve a 200-node power system on the microcomputer; the convergence is easy to reach and the computation speed is quick; it is possible to reduce 8-14% power loss and to get maximum economic benefit by using this method; in power system dispatch center it can be used as an on-line voltage and reactive power control program to keep good voltage level. The proposed method has been proved successful by IEEE 118-node test system and the several real power systems such as 49-node, 61-node, 99-node and 200-node systems.     

Research About the Knowledge Base for Motor Total Design Base on Knowledge-based Engineering

From the point of view of Knowledge-based Engineering, the knowledge expression, the knowledge organizing format, the knowledge base and management system is researched aiming at the characteristic of motor total design and the knowledge. The knowledge of motor concept design is expressed and organized by Object Oriented method, and the blocking knowledge base is built. Base on the academic research, the Object Oriented knowledge base and its management system for motor intelligent design platform are developed. The result indicates this knowledge base can effectively express the motorcycle knowledge, and make reasoning simply.     

Analysis on Stability for Uncertainty Complex Control System Based on Knowledge

Concept of stability is vague, but it is basic characteristic of dynamic system, and precondition that make all kinds of control system run normally. Today it is still a challenge to analyze stability for uncertainty complex control system, whose mathematic modeling is impossible or very difficult, so it is very hard to judge whether a system running is stable or not by mathematic stability criterion. A kind of analyzing method is presented, which combine absolute stability with self-locked concept of heuristic search, it may analyze system stability in more range through adjusting self-collected loop parameters for uncertain control system based on knowledge control model. It is shown that stability analyzing method is effective and suitable for practical physical system in the engineering project.     

THE APPLICASION OF SUPERVISOR CALL(SVC) FUNCTION IN DEVELOPING OF RMS SYSTEM

RMS system is a running management system self designed and developed for M304s computer system. Supervisor call (SVC) is one kind of method of communication between user and system in designing of operating system. This article introduces you the way how to resolve the problem in RMS design by using supervisor call function, with brief introduction of system design.     

Design of Manufacturing System for Business

In the new environment, product development is the core of product innovation and quickly responsive to the market for the enterprises. The speed and effectiveness of development is the key factor to the success of product development. The design for business is the key technique in achieving the effectiveness of product development. And manufacturing system is the bridge between business and products. The design method of facing business is discussed, and the design flow and content of manufacturing system supporting facing business are pointed out. At the same time, the author also sets forth the construction definition, the construction design and the detailed design of the manufacturing system. So the design flow of manufacturing system facing business is established.     

Intelligent Sound Broadcast System of Bus Based on CPLD

The traditional sound broadcast system of bus makes use of MPU. It's shortcoming is have lower dependability, at the same time the maintenance and upgrade is difficult. In order to solve these problems, an intelligent sound broadcast system of bus makes use of Complex Programmable Logic Device(CPLD) and sound chip ISD2560 is introduced, and the principle of design is analysed. Because of the ability of In System Programmability of CPLD's JTAG, and take full advantage of the resource in CPLD, this system have no use for MPU. So, the hard circuit of this system is simple, and the system is easy to debug, upgrade and has very high dependability and better practicability.     

Assessment of Gas Utilization for Landfill

In order to fulfill the landfill gas's energizing and protect the environment, many measures to control and exploit the landfill gas are taken. In this paper, a targets system and an analytic hierarchy process method which assesses the measures are put forward based on the systematic impact of environmental,economical and social benefits. It is useful to make a decision reasonably.     

A SELF-TUNING CONTROL FOR A PARALLEL AC/DC POWER SYSTEM

Based on a non-linear system model, an adaptive control methodology is presented for a parallel AC/DC power system by means of on-line recursive parameter identifications. Taking the advantage of rapid power regulatiing ability of the DC power system and combining with the generalized minimum variance self-tuning control principles, the dynamic qualities of the controlled system has been greatly improved. Using SISO form makes the control system very simple to implement. Through the design, simulation and analysis of the self-tuning control system for a practical example, it shows that the self-tuning control strategy is very promising for AC/DC power systems.