Biomimetic transport of simple olive biophenol and analogues through model biological membranes by differential scanning calorimetry.

The different interactions of p-hydroxybenzoic acid (1), a simple biophenol (BP) found in olives and their food products, and its substitute analogues, benzoic (2), anisic (3), and toluic (4) acids, with a model membrane represented by dimyristoylphosphatidylcholine (DMPC) multilamellar vesicles (MLV) was studied by differential scanning calorimetry (DSC). The influence of their different lipophilic character on transfer and absorption processes through an aqueous medium into a lipid bilayer was also investigated. DSC experiments allowed monitoring of the interaction of BP with biomembranes by considering the effects exerted on the thermotropic behavior of DMPC multilamellar and unilamellar vesicles at different pHs (4 and 7.4). The examined compounds affect the transition temperature (T(m)) of phospholipid vesicles, causing a shift toward lower values, which is modulated by the molecular fraction entering into the lipid bilayer, as well as by their molecular interaction with the lipids. Kinetic calorimetric measurements were performed on suspensions of blank liposomes immediately after being added to fixed weighed amounts of powdered compounds and after increasing incubation periods at 37 degrees C. T(m) shifts, due to molecular dissolution and transfer of the compounds into the membrane surface occurring during the incubation time, were compared with those determined by a fixed molar fraction of free compounds directly dispersed in the membrane. The results show that the kinetic process, involved in molecular release, transfer through aqueous medium, and uptake by the model membrane surface, is influenced by lipophilicity as well as by pH, acting on the acid solubility and membrane disorder, allowing us to gather useful information on the BP intake process of olive derived foodstuffs.     

Use of differential scanning calorimetry to study lipid oxidation. 1. Oxidative stability of lecithin and linolenic acid

The oxidation of linolenic acid (LNA) and soy lecithin was studied by differential scanning calorimetry (DSC) with linear programmed heating rates (non-isothermal mode). The interpretation of the shape of DSC curves is discussed, and it has been concluded that temperatures of the extrapolated start of heat release are the most reliable data for the rapid estimation of the oxidative stability of lipid materials. The Ozawa-Flynn-Wall method was used to calculate the kinetic parameters of the process: for LNA autoxidation the activation energy, Ea, and pre-exponential factor, Z, are 66 +/- 4 kJ/mol and 1.5 x 10(7) s(-1), respectively, and the autoxidation of lecithin is described by Ea = 98 +/- 6 kJ/mol and Z = 9.1 x 10(10) s(-1). Values of Ea and Z can be applied for calculation of the overall first-order rate constant of autoxidation at various temperatures, k(T). For the two studied lipids the comparison of k(T) values shows the inversion of their oxidative stabilities; that is, below 167 degrees C lecithin is more stable than LNA, k(T)lecithin < k(T)LNA, and above that temperature (termed the isokinetic temperature) k(T)lecithin > k(T)LNA. The calculated inversion of oxidative stabilities can be an explanation of similar observations for other pairs of lipids if the results of accelerated tests measured at temperatures above 100 degrees C are compared with the results obtained at temperatures below 100 degrees C.     

基于差示扫描量热法和热力学模型的生物柴油结晶行为分析

棕榈酸甲酯(C16:0)、硬脂酸甲酯(C18:0)和油酸甲酯(C18:1)是生物柴油的主要组成部分。为了深入探究生物柴油的结晶行为,该文基于差示扫描量热法(differential scanning calorimetry,DSC)分析了这3种脂肪酸酯的物性参数,研究发现饱和脂肪酸甲酯C16:0和C18:0的熔点和熔化焓远远高出不饱和脂肪酸甲酯C18:1的值,C16:0和C18:0的熔点分别为301.57、310.92 K,C18:1的熔点为255.01 K。对脂肪酸酯组成的二元溶液进行DSC扫描,DSC曲线出现了2个放热峰,并且溶液的结晶点要低于首先析出的饱和脂肪酸酯纯物质时的熔点;随着饱和脂肪酸酯质量分数的增加溶液的结晶点温度也相应提高。将生物柴油当作由多元脂肪酸甲酯的混合溶液时,C16:0和C18:0等饱和脂肪酸甲酯作为溶质,C18:1等不饱和脂肪酸甲酯作为溶剂,建立了热力学模型计算溶液的结晶点温度。将脂肪酸甲酯的混合溶液近似为理想溶液时对此模型进一步简化,并利用简化模型计算得到4种生物柴油的结晶温度,与实测值进行比较得到了很好的验证效果。该研究可为优化生物柴油低温流动性的技术措施提供参考。     

Analysis of leaf and needle litter decomposition by differential scanning calorimetry and differential thermogravimetry

Summary Changes in the physicochemical properties of three kinds of litter (Prunus serotina leaves, Carpinus betulus leaves, and Pinus sylvestris needles) were analyzed by differential scanning calorimetry and differential thermogravimetry after decomposition for 12 to 27 months under field conditions. As expected, holocellulose was always decomposed to a larger extent than the corresponding lignin components, leading to an enrichment of lignin in the residue. These lignins were more or less modified depending on the plant species. Moreover, the results suggest that energy-rich crystalline cellulose accumulates during decomposition at the expense of easier degradable amorphous cellulose and hemicelluloses. The quotient Q, from the corresponding calorimetry and thermogravimetry values, was introduced to estimate the specific energy content as a measure for the decomposition of litter components.Dedicated to the late Prof. Dr. W. Kühnelt     

Ultrasonic spectroscopy and differential scanning calorimetry of liposomal-encapsulated nisin

The thermal stability of phosphatidylcholine (PC) liposomes (colloidal dispersions of bilayer-forming polar lipids in aqueous solvents) in the presence and absence of the antimicrobial polypeptide nisin was evaluated using differential scanning calorimetry (DSC) and low-intensity ultrasonic spectroscopy (US). PC liposome mixtures with varying acyl chain lengths (C16:0 and C18:0) were formed in buffer with or without entrapped nisin. Gel-to-liquid crystalline phase transition temperatures (T(M)) of liposomes determined from DSC thermograms were in excellent agreement with those determined by ultrasonic velocity and attenuation coefficient measurements recorded at 5 MHz. The dipalmitoylphosphatidylcholine (DPPC) T(M) measured by DSC was approximately 41.3 and approximately 40.7 degrees C when measured by ultrasonic spectroscopy. The T(M) of distearoylphosphatidylcholine (DSPC) and DPPC/DSPC 1:1 liposomes was 54.3 and 54.9 degrees C and approximately 44.8 and approximately 47.3 degrees C when measured by DSC and US, respectively. The thermotropic stability generally increased upon addition of nisin. Analysis of the stepwise decrease in ultrasonic velocity with temperature indicated an increased compressibility corresponding to a loss of structure upon heating.     

Kinetic analysis of nonisothermal differential scanning calorimetry of 1,3-dipalmitoyl-2-oleoylglycerol

The crystallization of fats has been extensively studied because of its importance in the processing of food and food ingredients. Differential scanning calorimetry (DSC) is widely used in such studies. The aim of this study was to examine the determination of kinetic parameters from nonisothermal DSC crystallization of a model fat, 1,3-dipalmitoyl-2-oleoylglycerol. We applied peak and isoconversional methods to determine activation energies and compared these techniques with a nonparametric method, which separates the temperature dependence and degree of crystallization dependence of the crystallization rate. The Johnson-Mehl-Avrami-Erofeyev-Kolmogorov (JMAEK) model provided the best fit to the data, while the temperature dependence of the rate constant was best explained by a Vogel-Fulcher relationship, where the reference temperature was the melting point of the crystallizing species.     

Differential scanning calorimetry evidence of the enhancement of beta-sitosterol absorption across biological membranes mediated by beta-cyclodextrins

beta-Sitosterol is a plant sterol that has received much attention because of its effectiveness in reducing the absorption of dietary cholesterol, as well as in offering protection from cardiovascular diseases and cancer development. Thus, the knowledge of the interaction of beta-sitosterol with biological membranes can help in understanding its mechanism of action. In the present paper, the differential scanning calorimetry technique has been used to study the interaction of beta-sitosterol with a biomembrane model constituted by dimyristoylphosphatidylcholine multilamellar vesicles. Furthermore, kinetic experiments have been carried out to follow the uptake of beta-sitosterol by biomembranes and the effect of beta-cyclodextrins on such a process. Our results indicate that opportune concentrations of beta-cyclodextrins improve the uptake of beta-sitosterol by phospholipid membranes.     

Changes in litter properties during decomposition: A study by differential thermogravimetry and scanning calorimetry

To verify the paradigm that organic matter (OM) quality (q) decreases with decomposition it is necessary to define q in strictly chemical, operational terms. We suggest defining q as the result of a balance between the energy stored in OM and the external supply of energy needed to release it. We apply this concept to the study of litter decomposition in four European pine forests: boreal, cool Atlantic, Mediterranean and warm Atlantic. Intact litter cores were taken and transported to the laboratory, where needles were sorted into six classes that summarize the main facts of the decomposition: melanisation, fragmentation and perforation by mesofauna. Each class was analyzed by both differential thermogravimetry and differential scanning calorimetry to obtain its spectra of weight loss and energy release.In the non-decomposed needles, two peaks of weight loss and energy release appear: a labile peak at about 350 °C, and a recalcitrant peak at about 450 °C. During decomposition, both peaks (but especially the recalcitrant one) move to lower temperatures, and their shapes change from well defined to flattened. In Mediterranean litters, a third peak appears at about 500 °C, due probably to refractory products of neoformation. There is a continuous increase in the energy stored in the remaining litter (in Joules per unit OM): this increase is concentrated in both the most thermolabile fractions (lost at temperatures <350 °C) and the most thermostable ones (>450 °C). With decomposition OM becomes more recalcitrant (i.e., it is lost at higher temperatures), but its stored energy becomes more available (i.e., it is released at lower temperatures). Overall, the energetic benefit/cost ratio increases. Thus, our results to date do not agree with the current paradigm that q decreases with decomposition; rather, they suggest that, at least in the first phases we studied, q is maintained or even increases.     

Glass transition temperature of honey as a function of water content as determined by differential scanning calorimetry

The glass transition of pure and diluted honey and the glass transition of the maximally freeze-concentrated solution of honey were investigated by differential scanning calorimetry (DSC). The glass transition temperature, of the pure honey samples accepted as unadulterated varied between -42 and -51 degrees C. Dilution of honey to 90 wt % honey content resulted in a shift of the glass transition temperature by -13 to -20 degrees C. The concentration of the maximally freeze-concentrated honey solutions, as expressed in terms of honey content is approximately 102-103%, i.e., slightly more concentrated in sugars than honey itself. The application of DSC measurements of and in characterization of honey may be considered, but requires systematic study on a number of honeys.     

Interaction of resveratrol and its trimethyl and triacetyl derivatives with biomembrane models studied by differential scanning calorimetry

The interaction of resveratrol (trans-3,5,4'-trihydroxystilbene) and two of its derivatives (3,5,4'-tri-O-methylresveratrol and 3,5,4'-tri-O-triacetylresveratrol) with biomembrane models, represented by dimyristoylphosphatidylcholine (DMPC) multilamellar vesicles (MLV), has been studied by differential scanning calorimetry (DSC). The analysis of MLV prepared in the presence of increasing molar fraction of such compounds has been carried out to reveal their maximum interaction with biomembrane models. The results from these studies have been compared with kinetic experiments results, in order to detect the entity and rate of compound absorption by the biomembrane models. The findings indicate that the compounds affected the thermotropic properties of DMPC MLV by suppressing the pretransition peak and broadening the DMPC main phase transition calorimetric peak and shifting it to lower temperatures. The order of effectiveness found was resveratrol > trimethylresveratrol > triacetylresveratrol. The kinetic experiments reveal that in an aqueous medium the absorption of resveratrol by the biomembranes models is allowed, whereas the absorption of its derivatives is hindered; in contrast when a lipophilic medium is employed, all three compounds are easily absorbed.     

Elucidation of the effect of formaldehyde and lipids on frozen stored cod collagen by FT-Raman spectroscopy and differential scanning calorimetry

The effect of frozen storage (-10 and -30 degrees C), formaldehyde, and fish oil on collagen, isolated from cod muscle, was investigated. Salt- and acid-soluble collagen fractions as well as insoluble collagen indicated changes in solubility on frozen storage. Differential scanning calorimetry (DSC) showed a highly cooperative transition at 28.2 degrees C for isolated collagen. Changes in the thermodynamic properties of collagen were observed on frozen storage at -10 degrees C compared with the control at -30 degrees C because of changes in structure. In the presence of formaldehyde, there were no changes in the DSC collagen transition; however, in the presence of fish oil there was an increase in enthalpy and an extra peak was observed at 44.6 degrees C, indicating collagen-fish oil interaction. Structural changes resulted in a decrease in the solubility of collagen in salt and acid solution. FT-Raman spectra obtained for collagen at -10 degrees C and -30 degrees C confirmed the alteration of the conformation of collagen not only at -10 degrees C but also in the presence of formaldehyde and fish oil.     

Impact of maltodextrins and antistaling enzymes on the differential scanning calorimetry staling endotherm of baked bread doughs

Different concentrations (1.2-3.6%) of maltodextrin preparations with average degrees of polymerization (DP) varying between 4 and 66 reduced the differential scanning calorimetry (DSC) staling endotherm in baked and stored (7 days, 23 degrees C) bread doughs from 3.4 mJ/mg to values within a 3.0-1.9 mJ/mg range. Commercial enzymes used in industrial practice as antistaling agents for bread also reduced amylopectin retrogradation. This suggested that the maltodextrins used are promising antistaling components and that the staling of bread and amylopectin retrogradation are related phenomena. In addition, the results obtained suggest that starch hydrolysis products resulting from enzymic attack may well be responsible for the antistaling effect induced by antistaling enzymes.     

Conformational study of globulin from common buckwheat (Fagopyrum esculentum Moench) by Fourier transform infrared spectroscopy and differential scanning calorimetry

Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC) were used to study changes in the conformation of globulin from common buckwheat (Fagopyrum esculentum Moench) (BWG) under various environmental conditions. The IR spectrum of the native BWG showed several major bands from 1691 to 1636 cm(-1) in the amide I' region, and the secondary structure composition was estimated as 34.5% beta-sheets, 20.0% beta-turns, 16.0% alpha-helices, and 14.4% random coils. Highly acidic and alkaline pH conditions induced decreases in beta-sheet and alpha-helical contents, as well as in denaturation temperature (Td) and enthalpy of denaturation (DeltaH), as shown in the DSC thermograms. Addition of chaotropic salts (1.0 M) caused progressive decreases in ordered structures and thermal stability following the lyotropic series of anions. The presence of several protein structure perturbants also led to changes in IR band intensities and DSC thermal stabilities, suggesting protein unfolding. Intermolecular antiparallel beta-sheet (1620 and 1681 cm(-1)) band intensities started to increase when BWG was heated to 90 degrees C, suggesting the initiation of protein aggregation. Increasing the time of the preheat treatment (at 100 degrees C) caused progressive increases in Td and pronounced decreases in DeltaH, suggesting partial denaturation and reassociation of protein molecules.     

Phase transitions in the starch-water system studied by adiabatic scanning calorimetry

We report high-precision measurements of phase transitions in the starch-water system by using for the first time adiabatic scanning calorimetry (ASC). Potato starch and nixtamalized corn flours were studied by this technique as a function of the moisture content. We calculated the percentage of gelatinized starch granules, as a function of the temperature, for both flours. For bi-phasic behavior in potato starch, at intermediate water contents, we propose an explanation based on previous hypotheses and on the experimental behavior as deduced from ASC measurements. ASC results suggest, in the case of nixtamalized corn flour, that uniform moisture is present in corn starch granules for all the considered moistures. A shift to higher temperatures of the peak temperature is observed when comparing the c(p)(T) curves with the classical DSC endotherms as measured for this flour. For both flours we estimated from the ASC results the melting temperatures of the starch granules, at zero moisture content, by using Flory's equation.     

Conformational study of red kidney bean (Phaseolus vulgaris L.) protein isolate (KPI) by tryptophan fluorescence and differential scanning calorimetry

Fluorescence and differential scanning calorimetry (DSC) were used to study changes in the conformation of red kidney bean (Phaseolus vulgaris L.) protein isolate (KPI) under various environmental conditions. The possible relationship between fluorescence data and DSC characteristics was also discussed. Tryptophan fluorescence and fluorescence quenching analyses indicated that the tryptophan residues in KPI, exhibiting multiple fluorophores with different accessibilities to acrylamide, are largely buried in the hydrophobic core of the protein matrix, with positively charged side chains close to at least some of the tryptophan residues. GdnHCl was more effective than urea and SDS in denaturing KPI. SDS and urea caused variable red shifts, 2-5 nm, in the emission λ(max), suggesting the conformational compactness of KPI. The result was further supported by DSC characteristics that a discernible endothermic peak was still detected up to 8 M urea or 30 mM SDS, also evidenced by the absence of any shift in emission maximum (λ(max)) at different pH conditions. Marked decreases in T(d) and enthalpy (ΔH) were observed at extreme alkaline and/or acidic pH, whereas the presence of NaCl resulted in higher T(d) and ΔH, along with greater cooperativity of the transition. Decreases in T(d) and ΔH were observed in the presence of protein perturbants, for example, SDS and urea, indicating partial denaturation and decrease in thermal stability. Dithiothreitol and N-ethylmaleimide have a slight effect on the thermal properties of KPI. Interestingly, a close linear relationship between the T(d) (or ΔH) and the λ(max) was observed for KPI in the presence of 0-6 M urea.     

The question of high- or low-temperature glass transition in frozen fish. Construction of the supplemented state diagram for tuna muscle by differential scanning calorimetry

The thermal behavior of fresh tuna muscle, rehydrated freeze-dried tuna muscle, and tuna sarcoplasmic protein fraction was studied by three types of differential scanning calorimetry (DSC): conventional DSC, alternating DSC, and sensitive micro-DSC. The relationship between glass transition temperature, T(g), and water content was established. Only a low-temperature glass transition was detected for fresh tuna and freeze-dried tuna rehydrated to high water contents, whereas for sarcoplasmic protein fraction both a low-temperature and an apparent high-temperature glass transition were detected for samples of high water content. Construction of the supplemented state diagrams for whole tuna muscle and for tuna sarcoplasmic protein fraction confirmed the low-temperature transition to be glass transition of the maximally freeze-dehydrated phase. The apparent upper transition of sarcoplasmic protein fraction was shown not to be a glass transition but rather to originate from the onset of melting of ice, and the temperature of this event should be denoted T(m)'. The glass transition temperature and the concentration of the maximally freeze dehydrated tuna muscle are -74 degrees C and 79% (w/w), respectively.     

Anhydrous goat's milk fat: thermal and structural behaviors studied by coupled differential scanning calorimetry and X-ray diffraction. 2. Influence of cooling rate

Crystallization and melting properties of triacylglycerols (TGs) in anhydrous goat's milk fat (AGMF) are investigated by X-ray diffraction as a function of temperature (XRDT) coupled with high-sensitivity differential scanning calorimetry (DSC), using synchrotron radiation and Microcalix. The polymorphic behavior of AGMF was monitored by varying the cooling rates between 5 and 1 degrees C/min from 45 to -20 degrees C with their subsequent melting at 1 degrees C/min. Quenching of AGMF at -20 degrees C was also examined to determine the metastable polymorphic form of AGMF. At intermediate cooling rates, TGs in AGMF crystallize, from about 18 degrees C in two different lamellar structures with triple chain length 3Lalpha stacking of 72 A and a double chain length 2Lalpha stacking of 48 A, which are correlated to two overlapped exothermic peaks recorded by DSC. A reversible transition sub alpha <--> alpha was observed. Subsequent heating at 1 degrees C/min shows numerous structural rearrangements before final melting. At fast cooling of AGMF (5 degrees C/min), similar unstable crystalline varieties are formed while three endotherms are recorded. Several new unstable lamellar structures are observed after quenching. All of these data are compared to those previously reported at slow cooling (0.1 degrees C/min) showing a relative stability of the structures formed. In spite of general similitude, the thermal and structural behavior of the goat's milk is more complex than that of the cow's milk.     

Analysis of the retrogradation of low starch concentration gels using differential scanning calorimetry,rheology, and nuclear magnetic resonance spectroscopy

The retrogradation of 5, 10, 15, and 25% corn starch gels was measured using differential scanning calorimetry (DSC), rheology, and an array of NMR spectroscopy techniques. During the initial (<24 h) stage of retrogradation, an increase in G' corresponding to an increase in the number of solid protons participating in cross-relaxation (M(B)(0) was observed for all four concentrations studied. During the latter (>24 h) stage of retrogradation, amylopectin recrystallization becomes the dominant process as measured by an increase in deltaH(r) for the 25% starch gel, which corresponded to a further increase in. A decrease in the molecular mobility of the liquid component was observed by decreases in (17)O T(2), (1)H D(0), and T(2A). The value for T(2B) (the solid transverse relaxation time) did not change with concentration or time indicating that the mobility of the solid component does not change over time despite the conversion of the highly mobile starch fraction to the less mobile solid state during retrogradation.     

Identification and characterization of conjugated linolenic acid isomers by Ag+-HPLC and NMR

Interest in the biological activity of conjugated linolenic acids (CLnA) is growing. Technically, previous methods could not fully characterize and identify CLnA isomers. The present study is the first report on application of silver ion impregnated high-performance liquid chromatography (Ag+-HPLC) into separation of CLnA methyl ester (CLnAMe) mixture. Compared with the GC and reversed-phase HPLC techniques, Ag+-HPLC could resolve and separate CLnAMe isomers into three clusters of peaks namely ttt, ctt and ctc geometrical groups. Each positional isomer belonging to the same geometrical group could be further separated by Ag+-HPLC. Quantitative 13C NMR properties of CLnAMe mixture were subsequently studied. Olefinic signals in the CLnAMe mixture were assigned and used to quantify each isomer in combination with Ag+-HPLC. The present study provided a detailed analysis of a complex CLnA mixture and may have an important application in future studies dealing with synthesis, oxidative stability, and bioactivity of individual CLnA isomers.     

Differential scanning calorimetry study of glass transition in frozen starch gels

The effects of initial water content, maximum heating temperature, amylopectin crystallinity type, and annealing on the glass transition of starch gels were studied by differential scanning calorimetry (DSC). The glass transition temperatures of the frozen gels measured as the onset (T(g,onset)) or midpoint temperature (T(g,midpoint)), heat capacity change during the glass transition (deltaC(p)), unfrozen water of starch gels, and additional unfrozen water (AUW) arising from gelatinization were reported. The results show that T(g,onset) and T(g,midpoint) of the partially gelatinized gels are independent of the initial water content, while both of the T(g) values of the fully gelatinized gel increase as the initial water content increases. These observations might result from the difference in the level of structural disruption associated with different heating conditions, resulting in different gel structures as well as different concentrations of the sub-T(g) unfrozen matrix. The amylopectin crystallinity type does not greatly affect T(g,onset) and T(g,midpoint) of the gels. Annealing at a temperature near T(g,onset) increases both T(g,onset) and T(g,midpoint) of the gels, possibly due to an increase in the extent of the freeze concentration as evidenced by a decrease in AUW. Annealing results in an increase in the deltaC(p) value of the gels, presumably due to structural relaxation. A devitrification exotherm may be related to AUW. The annealing process decreases AUW, thus also decreasing the size of the exotherm.