Identification and quantitation of volatile compounds in two heated model compounds, trilinolein and linoleic acid esterified propoxylated glycerol

Static headspace (HS) and capillary gas chromatography/infrared spectroscopy-mass spectrometry (GC/IR-MS) were used to collect, separate, identify, and quantitate the oxidative and thermal decomposition products in two heated model compounds, linoleic acid esterified propoxylated glycerol (EPG-08 linoleate) and trilinoleylglycerol, both without added antioxidants. Approximately 4 L of EPG-08 linoleate or trilinoleylglycerol was heated in a deep-fat fryer at 192 +/- 8 degrees C for 12 h each day until the oil sample contained > or =20% polymeric material, which occurred after 24 h of heating. The major volatile compounds both in heated EPG-08 linoleate and in heated trilinoleylglycerol were pentane, hexanal, 2-heptenal, 1-octen-3-ol, 2-pentylfuran, 2-octenal, and 2, 4-decadienal. The identified volatile compounds from heated EPG-08 linoleate are those generally expected from the oxidative and thermal decomposition of fats and oils containing linoleic acid, except acetoxyacetone (1-acetoxy-2-propanone). Acetoxyacetone was found at 2.1, 3, and 2.4 ppm in the unheated, 12 h heated, and 24 h heated samples, respectively.     

Antioxidant properties of malt model systems

The aim of this study was to investigate the effect of kilning and roasting temperatures on antioxidant activity of malt model systems prepared from combinations of glucose, proline, and ferulic acid. Model systems (initial a(w) = 0.09, 6% moisture) were heated at 60 degrees C for up to 24 h, at 90 degrees C for up to 120 min, and at 220 degrees C for up to 15 min. The antioxidant activity of the glucose-proline-ferulic acid model system increased significantly on heating at 60 degrees C for 24 h or at 90 degrees C for 120 min. In contrast, the glucose-proline, ferulic acid-glucose, and ferulic acid-proline systems presented either nonsignificantly increased or unchanged antioxidant activity. The antioxidant activity of both the glucose-proline-ferulic acid and glucose-proline model systems increased significantly after heating at 220 degrees C for 10 min, followed by a significant decrease at 15 min. The data suggest that (1) at 60 degrees C, ferulic acid reacts with Maillard reaction products, resulting in a significant increase in antioxidant activity; (2) at 90 degrees C, the antioxidant activity of the glucose-proline-ferulic system comes from both ferulic acid and Maillard reaction products; and (3) at 220 degrees C, the major contributors to antioxidant activity in glucose-proline-ferulic acid and glucose-proline systems are glucose-proline reaction products.     

Headspace solid-phase microextraction use for the characterization of volatile compounds in vegetable oils of different sensory quality

Headspace solid-phase microextraction (HS-SPME) was used to isolate the volatile compounds, which are formed during peroxidation of fatty acids in vegetable oils. Isolated compounds were characterized by GC-MS and quantified using GC with FID detection. Four fibers for HS-SPME method development were tested, and the divinylbenzene/carboxene/PDMS fiber was selected as providing the best detection of analyzed compounds. Extraction curves, limits of detection, repeatability, and linearity were investigated for 14 aldehydes, ketones, hydrocarbons, and alcohols being products of fatty acids autoxidation. Limits of detection for 11 of these were below 1 microg/L. For quantitative purposes, to minimize the influence of temperature on hydroperoxide formation and the changes in the volatiles profile of the extracts, sampling was performed at 20 degrees C. For compound characterization by GC-MS, sampling temperature of 50 degrees C was applied. The developed method was applied to the analysis of refined and cold-pressed rapeseed oil stored at 60 degrees C for 10 days, and for 10 different vegetable oils of various degree of peroxidation. All samples were subjected to sensory analysis. The results of PCA sensory analysis were related to the amount of volatile compounds isolated by SPME method. In cases where the amount of compounds was highest, the samples were perceived as the worst, whereas those with low levels of volatile compounds were the most desired ones according to sensory evaluation. The relation was observed for both total volatiles, quantified C5-C9 aldehydes, and 14 compounds selected in method development. SPME revealed to be a rapid and sensitive method for the extraction and quantitation of trace volatile compounds from plant oils even at ambient temperature.     

Influence of thermal treatments simulating cooking processes on the polyphenol content in virgin olive oil

Virgin olive oils were subjected to simulated common domestic processing, including frying, microwave heating, and boiling with water in a pressure cooker. The impact of these processes on polyphenol content and physicochemical characteristics of oils was assessed. Thermal oxidation of oils at 180 degrees C caused a significant decrease in hydroxytyrosol- and tyrosol-like substances. In contrast, oils heated for 25 h still retained a high proportion of the lignans 1-acetoxypinoresinol and pinoresinol. Thermal oxidation also resulted in a rapid degradation of alpha-tocopherol and the glyceridic fraction of oils. Microwave heating of oils for 10 min caused only minor losses in polyphenols, and the oil degradation was lower than that in thermoxidation assays. Again, lignans were the least affected polyphenols and did not change during microwave heating. Boiling a mixture of virgin olive oil and water in a pressure cooker for 30 min provoked the hydrolysis of the secoiridoid aglycons and the diffusion of the free phenolics hydroxytyrosol and tyrosol from the oil to the water phase. Losses of polyphenols were detected only at pH lower than 6. Moreover, alpha-tocopherol and the glyceridic fraction of oils were not modified during this process. It is worth noting that all the heating methods assayed resulted in more severe polyphenols losses and oil degradation for Arbequina than for Picual oil, which could be related to the lower content in polyunsaturated fatty acids of the latter olive cultivar. These findings may be relevant to the choice of cooking method and olive oil cultivar to increase the intake of olive polyphenols.     

Effects of natural phenolic compounds on the antioxidant activity of lactoferrin in liposomes and oil-in-water emulsions

The effect of natural phenolic compounds on the antioxidant and prooxidant activity of lactoferrin was studied in liposomes and oil-in-water emulsions containing iron. The antioxidants tested with lactoferrin were alpha-tocopherol, ferulic acid, coumaric acid, tyrosol, and natural phenolic extracts obtained from three different extra-virgin olive oils and olive mill wastewater. The natural extracts of olive oils and mill wastewaters were composed mainly of polyphenols and simple phenolics, respectively. Lipid oxidation at 30 degrees C was determined by the formation of hydroperoxides and fluorescent compounds resulting from oxidized lipid interactions. All phenolic compounds showed synergistic properties in reinforcing the antioxidant activity of lactoferrin in lipid systems containing iron. The highest synergistic effects were observed for the phenolic extracts rich in polyphenols of extra-virgin olive oils and lactoferrin. This synergistic effect was higher in liposomes than in emulsions.     

Changes in volatile and phenolic compounds with malaxation time and temperature during virgin olive oil production

Virgin olive oils produced at wide ranges of malaxation temperatures (15, 30, 45, and 60 degrees C) and times (30, 60, 90, and 120 min) in a complete factorial experimental design were discriminated with stepwise linear discriminant analysis (SLDA) revealing differences with processing conditions. Virgin olive oils produced at 15 and 60 degrees C for 30 min showed the most significant (p < 0.01) differences. Discrimination was based upon volatile and phenolic compounds detected in olive oils, peroxide value (PV), free fatty acids (FFA), ultraviolet (UV) absorbances, and oil yield. There were different discriminating variables for processing conditions illustrating the dependence of virgin olive oil quality on malaxation time and temperature. Volatile compounds were the dominant discriminating variables. Common oxidation indicators of olive oil (PV, K232, and K270) were not among the variables that significantly (p < 0.01) changed with malaxation time and temperature. Variables that discriminated both malaxation time and temperature were hexanal, 3,4-dihydroxyphenyl ethyl alcohol-decarboxymethyl elenolic acid dialdehyde (3,4-DHPEA-DEDA) and FFA, whereas 1-penten-3-ol, E-2-hexenal, octane, tyrosol, and vanillic acid significantly (p < 0.01) changed with temperature only and Z-2-penten-1-ol, (+)-acetoxypinoresinol, and oil yield changed with time only. Virgin olive oil quality was significantly influenced by malaxation temperature, whereas oil yield discriminated malaxation time. This study demonstrates the two modes of hexanal formation: enzymatic and nonenzymatic during virgin olive oil extraction.     

Volatile compounds produced from monosodium glutamate in common food cooking

A mixture of soybean oil and/or water, sugar and/or monosodium glutamate (MSG) was water-boiled or oil-heated at 100, 120, 140, 160, or 170 degrees C, respectively, and volatile compounds produced were isolated by solid-phase microextraction and then identified by GC and GC/MS. Oxidative thermal degradation products of fatty acids (OTDPFA) were the major volatile compounds detected for all water-boiled samples. When MSG and sugar were heated together, 2, 5-dimethyl pyrazine and methyl pyrazine were also detected at or after 160 min heating. Water added in soybean oil increased OTDPFA production. In oil-heated samples of soybean oil alone, soybean oil with MSG, and soybean oil with sugar, OTDPFA were also the major compounds found. The samples containing MSG also produced 2-pyrrolidone, and the samples containing sugar also produced furfural and 5-hydroxy methyl furfural. The samples containing soybean oil, sugar, and MSG produced 23 pyrazines, OTDPFA, and gamma-butyrolactone as the major volatile compounds. The contents of OTDPFA were lower in MSG plus sugar and MSG-added samples, and it is postulated that antioxidant activities were produced in cooking.     

Reduction of oil bitterness by heating of olive (Olea europaea) fruits

Olives (Olea europaea) of the Manzanilla and Verdial varieties, harvested at the green mature stage of ripening, were heated at 30, 40, 45, and 50 degrees C during 24 h and at 40 degrees C during 24, 48, and 72 h, respectively. Just after treatments, oils were physically extracted from the olives. Olive heating promotes a reduction of oil bitterness in direct relationship to the time and temperature used. Fruit heating at < or =40 degrees C during 24 h did not produce significant changes of acidity, UV absorption, peroxide index, panel test score, or oxidative stability of the obtained oils. Both longer treatments at 40 degrees C and heating at >40 degrees C yielded oils with less oxidative stability. Oils obtained from olives heated at > or =40 degrees C showed higher concentrations of chlorophylls and carotenes. For each olive variety, a good correlation between oil bitterness and content of hydroxytyrosol secoiridoid derivatives was found.     

Vegetable oil stability at elevated temperatures in the presence of ferric stearate and ferrous octanoate

The thermoxidative stability of partially hydrogenated soybean oil (PHSBO) was examined after addition of ferric stearate and ferrous octanoate, and then heating the samples at 120, 160, 180, and 200 degrees C. In a second experiment, the effect of iron concentration (ferric stearate) on PHSBO stability was examined at 180 degrees C, and at concentrations of approximately 0.5 and 1.2 mg of added iron/kg PHSBO. Oil samples were heated continuously for 72 h and sampled every 12 h. The acid value, p-anisidine value, color, dielectric constant and the triacylglycerol polymer content of oil samples were compared to oil samples containing no added iron. Generally, the value of each oxidative index increased with (1) an increase in temperature, (2) an increase in heating time, and/or (3) an increase in iron. The results demonstrate that low concentrations of iron will substantially increase the rate of oxidation for vegetable oil samples heated to temperatures of 120 degrees C to 200 degrees C.     

Correlation of acrylamide generation in thermally processed model systems of asparagine and glucose with color formation, amounts of pyrazines formed, and antioxidative properties of extracts

The relations between the formation of acrylamide and color, pyrazines, or antioxidants in an asparagine/d-glucose browning model system under various conditions were investigated. The highest level of acrylamide was produced in the asparagine/glucose (1:3) system heated at 170 degrees C for 30 min (2629 microg/g asparagine). Color intensity increased with temperature and heating time. The formation of pyrazines increased steadily with an increase of temperature (140-170 degrees C) and heating time (15-60 min). Antioxidant formation varied among the samples heated under different conditions. A clear correlation between formation of acrylamide and browning color was obtained. The formation of acrylamide was linearly correlated with the formation of total pyrazines during the initial stages of the Maillard reaction. No obvious correlation between formation of acrylamide and antioxidants was observed. However, excess amounts of asparagine increased the formation of antioxidants, whereas excess amounts of glucose reduced its formation.     

Chemical composition, antioxidant properties, and thermal stability of a phytochemical enriched oil from Acai (Euterpe oleracea Mart.)

Phenolic compounds present in crude oil extracts from acai fruit ( Euterpe oleracea) were identified for the first time. The stability of acai oil that contained three concentrations of phenolics was evaluated under short- and long-term storage for lipid oxidation and phenolic retention impacting antioxidant capacity. Similar to acai fruit itself, acai oil isolates contained phenolic acids such as vanillic acid (1,616 +/- 94 mg/kg), syringic acid (1,073 +/- 62 mg/kg), p-hydroxybenzoic acid (892 +/- 52 mg/kg), protocatechuic acid (630 +/- 36 mg/kg), and ferulic acid (101 +/- 5.9 mg/kg) at highly enriched concentrations in relation to acai pulp as well as (+)-catechin (66.7 +/- 4.8 mg/kg) and numerous procyanidin oligomers (3,102 +/- 130 mg/kg). Phenolic acids experienced up to 16% loss after 10 weeks of storage at 20 or 30 degrees C and up to 33% loss at 40 degrees C. Procyanidin oligomers degraded more extensively (23% at 20 degrees C, 39% at 30 degrees C, and 74% at 40 degrees C), in both high- and low-phenolic acai oils. The hydrophilic antioxidant capacity of acai oil isolates with the highest phenolic concentration was 21.5 +/- 1.7 micromol Trolox equivalents/g, and the total soluble phenolic content was 1252 +/- 11 mg gallic acid equivalents/kg, and each decreased by up to 30 and 40%, respectively, during long-term storage. The short-term heating stability at 150 and 170 degrees C for up to 20 min exhibited only minor losses (<10%) in phenolics and antioxidant capacity. Because of its high phenolic content, the phytochemical-enriched acai oil from acai fruit offers a promising alternative to traditional tropical oils for food, supplements, and cosmetic applications.     

Microwave heating of tea residue yields polysaccharides, polyphenols, and plant biopolyester

Microwave heating was used to produce aqueous-soluble components from green, oolong, and black tea residues. Heating at 200-230 degrees C for 2 min extracted 40-50% of polysaccharides and 60-70% of the polyphenols. Solubilization of arabinose and galactose by autohydrolysis occurred with heating above 170 degrees C, whereas heating above 200 degrees C was necessary to solubilize xylose. Catechins were soluble in water by heating at low temperature (110 degrees C); however, new polyphenols having strong antioxidant activity were produced above 200 degrees C. The amount of solubilized materials and antioxidant activity increased with increased fermentation of harvested tea leaves (green tea < oolong tea < black tea). Cutin, a plant biopolyester, remained in the residue after heating as did cellulose and lignin/tannin. The predominant cutin monomer that was recovered was 9,10-epoxy-18-hydroxyoctadecanoic acid, followed by dihydroxyhexadecanoic acid and 9,10,18-trihydroxyoctadecanoic acid.     

Effect of heat treatment on the antioxidant activity, color, and free phenolic acid profile of malt

Green malt was kilned at 95 degrees C following two regimens: a standard regimen (SKR) and a rapid regimen (RKR). Both resulting malts were treated further in a tray dryer heated to 120 degrees C, as was green malt previously dried to 65 degrees C (TDR). Each regimen was monitored by determining the color, antioxidant activity (by both ABTS(.+) and FRAP methods), and polyphenolic profile. SKR and RKR malts exhibited decreased L* and increased b* values above approximately 80 degrees C. TDR malts changed significantly less, and color did not develop until 110 degrees C, implying that different chemical reactions lead to color in those malts. Antioxidant activity increased progressively with each regimen, although with TDR malts this became significant only at 110-120 degrees C. The RKR malt ABTS(.+) values were higher than those of the SKR malt. The main phenolics, that is, ferulic, p-coumaric, and vanillic acids, were monitored throughout heating. Ferulic acid levels increased upon heating to 80 degrees C for SKR and to 70 degrees C for RKR, with subsequent decreases. However, the levels for TDR malts did not increase significantly. The increase in free phenolics early in kilning could be due to enzymatic release of bound phenolics and/or easier extractability due to changes in the matrix. The differences between the kilning regimens used suggest that further modification of the regimens could lead to greater release of bound phenolics with consequent beneficial effects on flavor stability in beer and, more generally, on human health.     

How heating affects extra virgin olive oil quality indexes and chemical composition

Two monovarietal extra virgin olive oils from Arbequina and Picual cultivars were subjected to heating at 180 degrees C for 36 h. Oxidation progress was monitored by measuring oil quality changes (peroxide value and conjugated dienes and trienes), fatty acid composition, and minor compound content. Tocopherols and polyphenols were the most affected by the thermal treatment and showed the highest degradation rate although their behavior was different for each cultivar. Alpha-tocopherol loss was more important in Arbequina oil whereas, total phenol content loss was greater in Picual oil. The later showed an important decrease in hydroxytyrosol (3,4-DHPEA) and its secoiridoid derivatives (3,4-DHPEA-EDA and 3,4-DHPEA-EA), while lignans decrease was lesser. For Arbequina oil these compounds remained stable, and a lowering tendency was observed for tyrosol (p-HPEA) and its derivatives (p-HPEA-EDA and p-HPEA-EA). In general, flavone content showed a decrease during heating, being higher for Arbequina oil. On the other hand, oleic acid, sterols, squalene, and triterpenic alcohols (erythrodiol and uvaol) and acids (oleanolic and maslinic) were quite constant, exhibiting a high stability against oxidation. From these results, we can conclude that despite the heating conditions, VOO maintained most of its minor compounds and, therefore, most of its nutritional properties.     

Effect of pH, temperature, and moisture on the formation of volatile compounds in glycine/glucose model systems

Mixtures of glycine, glucose, and starch were extrusion cooked using sodium hydroxide at 0, 3, and 6 g/L of extruder water feed, 18% moisture, and 120, 150, and 180 degrees C target die temperatures, giving extrudates with pH values of 5.6, 6.8, and 7.4. Freeze-dried equimolar solutions of glucose and glycine were heated either dry or after equilibration to approximately 13% moisture at 180 degrees C in a reaction-tube system designed to mimic the heating profile in an extruder. Volatile compounds were isolated onto Tenax and analyzed by gas chromatography-mass spectrometry. For the extrudates, total yields of volatiles increased with decreasing pH at 180 degrees C, reached a maximum at pH 6.8 at 150 degrees C, and increased with increasing pH at 120 degrees C. Amounts increased with temperature at all pH values. Pyrazines were the most abundant class for all sets of conditions (54-79% of total volatiles). Pyrroles, ketones, furans, oxazoles, and pyridines were also identified. Yields of volatiles from the reaction-tube samples increased by >60% in the moist system. Levels of individual classes also increased in the presence of moisture, except pyrazines, which decreased approximately 3.5-fold. Twenty-one of the compounds were common to the reaction-tube samples and the extrudates.     

Interactions between iron, phenolic compounds, emulsifiers, and pH in omega-3-enriched oil-in-water emulsions

The behavior of antioxidants in emulsions is influenced by several factors such as pH and emulsifier type. This study aimed to evaluate the interaction between selected food emulsifiers, phenolic compounds, iron, and pH and their effect on the oxidative stability of n-3 polyunsaturated lipids in a 10% oil-in-water emulsion. The emulsifiers tested were Tween 80 and Citrem, and the phenolic compounds were naringenin, rutin, caffeic acid, and coumaric acid. Lipid oxidation was evaluated at all levels, that is, formation of radicals (ESR), hydroperoxides (PV), and secondary volatile oxidation products. When iron was present, the pH was crucial for the formation of lipid oxidation products. At pH 3 some phenolic compounds, especially caffeic acid, reduced Fe(3+) to Fe(2+), and Fe(2+) increased lipid oxidation at this pH compared to pH 6. Among the evaluated phenols, caffeic acid had the most significant effects, as caffeic acid was found to be prooxidative irrespective of pH, emulsifier type, and presence of iron, although the degrees of lipid oxidation were different at the different experimental conditions. The other evaluated phenols were prooxidative at pH 3 in Citrem-stabilized emulsions and had no significant effect at pH 6 in Citrem- or Tween-stabilized emulsions on the basis of the formation of volatiles. The results indicated that phenol-iron complexes/nanoparticles were formed at pH 6.     

Factors affecting thermally induced furan formation

Furan, a potential carcinogen, can be induced by heat from sugars, ascorbic acid, and fatty acids. The objective of this research was to investigate the effect of pH, phosphate, temperature, and heating time on furan formation. Heat-induced furan formation from free sugars, ascorbic acid, and linoleic acid was profoundly affected by pH and the presence of phosphate. In general, the presence of phosphate increased furan formation in solutions of sugars and ascorbic acid. In a linoleic acid emulsion, phosphate increased the formation of furan at pH 6 but not at pH 3. When an ascorbic acid solution was heated, higher amounts of furan were produced at pH 3 than at pH 6 regardless of phosphate's presence. However, in linoleic acid emulsion, more furan was produced at pH 6 than at pH 3. The highest amount of furan was formed from the linoleic acid emulsion at pH 6. In fresh apple cider, a product with free sugars as the major components (besides water) and little fatty acids, ascorbic acid, or phosphate, small or very low amounts of furan was formed by heating at 90-120 degrees C for up to 10 min. The results indicated that free sugars may not lead to significant amounts of furan formation under conditions for pasteurization and sterilization. Importantly, this is the first report demonstrating that phosphate (in addition to pH) plays a significant role in thermally induced furan formation.     

Effect of milk protein concentrate on lipid oxidation and formation of fishy volatiles in herring mince (Clupea harengus) during frozen storage

The effect of milk protein concentrate (MPC) at 0, 2, 4, and 6% on lipid oxidation and volatile formation in frozen stored herring mince (-18 degrees C) was evaluated by analyzing samples at 0, 2, and 4 months for fatty acid composition, volatiles, and thiobarbituric acid reactive substances (TBARS). Sensory evaluation was also conducted to assess the intensity of fishy odor, and the volatiles were analyzed using static headspace gas chromatography-mass spectrometry (SHGC-MS). The addition of 4 and 6% MPC to herring mince resulted in a 33% and 50% reduction of TBARS, respectively, at month 4 and lessened the intensity of fishy odor throughout storage. However, MPC did not protect fatty acids from enzymatic degradation unless it was added immediately after mincing. Volatile analysis using SHGC-MS showed that 4% MPC was able to reduce headspace volatiles associated with fishy odor. MPC is most effective for reducing 4-heptenal, 3-methyl-1-butanol, 2-hexenal, and 1-penten-3-ol, which are known to be potent odorants associated with lipid oxidation.     

Formation and evolution of monoepoxy fatty acids in thermoxidized olive and sunflower oils and quantitation in used frying oils from restaurants and fried-food outlets

The formation and evolution of monoepoxy fatty acids, arising from oleic and linoleic acids, were investigated in olive oil and conventional sunflower oil, representatives of monounsaturated and polyunsaturated oils, respectively, during thermoxidation at 180 degrees C for 5, 10, and 15 h. Six monoepoxy fatty acids, cis-9,10- and trans-9,10-epoxystearate, arising from oleic acid, and cis-9,10-, trans-9,10-, cis-12,13-, and trans-12,13-epoxyoleate, arising from linoleic acid, were analyzed by gas chromatography after oil derivatization to fatty acid methyl esters. Considerable amounts, ranging from 4.29 to 14.24 mg/g of oil in olive oil and from 5.10 to 9.44 mg/g of oil in sunflower oil, were found after the heating periods assayed. Results showed that the monoepoxides quantitated constituted a major group among the oxidized fatty acid monomers formed at high temperature. For similar levels of degradation, higher contents of the monoepoxides were found in olive oil than in sunflower oil. Ten used frying oils from restaurants and fried-food outlets in Spain were analyzed to determine the contents of the monoepoxides in real frying oil samples. Levels ranged from 3.37 to 14.42 mg/g of oil. Results show that, for similar degradation levels, the monoepoxides were more abundant in the monounsaturated oils than in the polyunsaturated oils.     

Effect of citric acid and glycine addition on acrylamide and flavor in a potato model system

Acrylamide levels in cooked/processed food can be reduced by treatment with citric acid or glycine. In a potato model system cooked at 180 degrees C for 10-60 min, these treatments affected the volatile profiles. Strecker aldehydes and alkylpyrazines, key flavor compounds of cooked potato, were monitored. Citric acid limited the generation of volatiles, particularly the alkylpyrazines. Glycine increased the total volatile yield by promoting the formation of certain alkylpyrazines, namely, 2,3-dimethylpyrazine, trimethylpyrazine, 2-ethyl-3,5-dimethylpyrazine, tetramethylpyrazine, and 2,5-diethyl-3-methylpyrazine. However, the formation of other pyrazines and Strecker aldehydes was suppressed. It was proposed that the opposing effects of these treatments on total volatile yield may be used to best advantage by employing a combined treatment at lower concentrations, especially as both treatments were found to have an additive effect in reducing acrylamide. This would minimize the impact on flavor but still achieve the desired reduction in acrylamide levels.