Real-time observation of molecular motion on a surface

The laser-induced movement of CO molecules over a platinum surface was followed in real time by means of ultrafast vibrational spectroscopy. Because the CO molecules bound on different surface sites exhibit different C-O stretch vibrational frequencies, the site-to-site hopping, triggered by excitation with a laser pulse, can be determined from subpicosecond changes in the vibrational spectra. The unexpectedly fast motion--characterized by a 500-femtosecond time constant--reveals that a rotational motion of the CO molecules, rather than pure translation, is required for this diffusion process. This conclusion is corroborated by density functional theory calculations.     

Real-time observation of the vibration of a single adsorbed molecule

The newly developed femtosecond field emission camera was used to observe the time dependence of field emission through a single copper phthalocyanine molecule adsorbed on a tungsten tip. In many of the individual 212-picosecond-long recordings, the field emission was found to oscillate with a frequency between 5 x 10(10) and 20 x 10(10) hertz. The oscillations, which were not observed from a bare tip, are believed to arise from the vibration of a single molecule with respect to the surface. Numerical simulations confirmed the statistical significance of the data.     

Isolated metal atom geometries as a strategy for selective heterogeneous hydrogenations

Facile dissociation of reactants and weak binding of intermediates are key requirements for efficient and selective catalysis. However, these two variables are intimately linked in a way that does not generally allow the optimization of both properties simultaneously. By using desorption measurements in combination with high-resolution scanning tunneling microscopy, we show that individual, isolated Pd atoms in a Cu surface substantially lower the energy barrier to both hydrogen uptake on and subsequent desorption from the Cu metal surface. This facile hydrogen dissociation at Pd atom sites and weak binding to Cu allow for very selective hydrogenation of styrene and acetylene as compared with pure Cu or Pd metal alone.     

Light-driven motion of liquids on a photoresponsive surface

The macroscopic motion of liquids on a flat solid surface was manipulated reversibly by photoirradiation of a photoisomerizable monolayer covering the surface. When a liquid droplet several millimeters in diameter was placed on a substrate surface modified with a calix[4]resorcinarene derivative having photochromic azobenzene units, asymmetrical photoirradiation caused a gradient in surface free energy due to the photoisomerization of surface azobenzenes, leading to the directional motion of the droplet. The direction and velocity of the motion were tunable by varying the direction and steepness of the gradient in light intensity. The light-driven motion of a fluid substance in a surface-modified glass tube suggests potential applicability to microscale chemical process systems.     

The force needed to move an atom on a surface

Manipulation of individual atoms and molecules by scanning probe microscopy offers the ability of controlled assembly at the single-atom scale. However, the driving forces behind atomic manipulation have not yet been measured. We used an atomic force microscope to measure the vertical and lateral forces exerted on individual adsorbed atoms or molecules by the probe tip. We found that the force that it takes to move an atom depends strongly on the adsorbate and the surface. Our results indicate that for moving metal atoms on metal surfaces, the lateral force component plays the dominant role. Furthermore, measuring spatial maps of the forces during manipulation yielded the full potential energy landscape of the tip-sample interaction.     

Quantum reflection of He2 several nanometers above a grating surface

Quantum reflection allows an atom or molecule to be reflected from a solid before it reaches the region where it would encounter the repulsive potential of the surface. We observed nondestructive scattering of the helium dimer (He(2)), which has a binding energy of 10(-7) electron volt, from a solid reflection grating. We scattered a beam containing the dimer as well as atomic helium and larger clusters, but could differentiate the dimer by its diffraction angle. Helium dimers are quantum reflected tens of nanometers above the surface, where the surface-induced forces are too weak to dissociate the fragile bond.     

Structure of a Langmuir film on a liquid metal surface

The structure of organic monolayers on liquid surfaces depends sensitively on the details of the molecular interactions. The structure of a stearic acid film on a mercury surface was measured as a function of coverage with angstrom resolution. Unlike monolayers on water, the molecules were found here to undergo a transition from surface-parallel to surface-normal orientation with increasing coverage. At high coverage, two condensed hexatic phases of standing-up molecules were found. At low coverage, a two-dimensional (2D) gas phase and condensed single- and double-layered phases of flat-lying molecular dimers were revealed, exhibiting a 1D longitudinal positional order. This system should provide a broader tunability range for nanostructure construction than solid-supported self-assembled monolayers.     

Imaging bond formation between a gold atom and pentacene on an insulating surface

A covalent bond between an individual pentacene molecule and a gold atom was formed by means of single-molecule chemistry inside a scanning tunneling microscope junction. The bond formation is reversible, and different structural isomers can be produced. The single-molecule synthesis was done on ultrathin insulating films that electronically isolated the reactants and products from their environment. Direct imaging of the orbital hybridization upon bond formation provides insight into the energetic shifts and occupation of the molecular resonances.     

Confinement of electrons to quantum corrals on a metal surface

A method for confining electrons to artificial structures at the nanometer lengthscale is presented. Surface state electrons on a copper(111) surface were confined to closed structures (corrals) defined by barriers built from iron adatoms. The barriers were assembled by individually positioning iron adatoms with the tip of a 4-kelvin scanning tunneling microscope (STM). A circular corral of radius 71.3 A was constructed in this way out of 48 iron adatoms. Tunneling spectroscopy performed inside of the corral revealed a series of discrete resonances, providing evidence for size quantization. STM images show that the corral's interior local density of states is dominated by the eigenstate density expected for an electron trapped in a round two-dimensional box.     

Time-resolved investigation of coherently controlled electric currents at a metal surface

Studies of current dynamics in solids have been hindered by insufficiently brief trigger signals and electronic detection speeds. By combining a coherent control scheme with photoelectron spectroscopy, we generated and detected lateral electron currents at a metal surface on a femtosecond time scale with a contact-free experimental setup. We used coherent optical excitation at the light frequencies omega(a) and omega(a)/2 to induce the current, whose direction was controlled by the relative phase between the phase-locked laser excitation pulses. Time- and angle-resolved photoelectron spectroscopy afforded a direct image of the momentum distribution of the excited electrons as a function of time. For the first (n = 1) image-potential state of Cu(100), we found a decay time of 10 femtoseconds, attributable to electron scattering with steps and surface defects.     

Controlling the dynamics of a single atom in lateral atom manipulation

We studied the dynamics of a single cobalt (Co) atom during lateral manipulation on a copper (111) surface in a low-temperature scanning tunneling microscope. The Co binding site locations were revealed in a detailed image that resulted from lateral Co atom motion within the trapping potential of the scanning tip. Random telegraph noise, corresponding to the Co atom switching between hexagonal close-packed (hcp) and face-centered cubic (fcc) sites, was seen when the tip was used to try to position the Co atom over the higher energy hcp site. Varying the probe tip height modified the normal copper (111) potential landscape and allowed the residence time of the Co atom in these sites to be varied. At low tunneling voltages (less than approximately 5 millielectron volts), the transfer rate between sites was independent of tunneling voltage, current, and temperature. At higher voltages, the transfer rate exhibited a strong dependence on tunneling voltage, indicative of vibrational heating by inelastic electron scattering.     

Image of a sulfur atom

Two-dimensional signal averaging has been applied to dark field electron micrographs of molecules of 2,3,4,5-tetraacetoxymercurithiophene. Only the mercury atom images are seen in single micrographs. However, in the composite image, resulting from photographic superposition of 64 individual images, the sulfur atom in the molecule is clearly revealed.     

Real-space observation of molecular motion induced by femtosecond laser pulses

Femtosecond laser irradiation is used to excite adsorbed CO molecules on a Cu110 surface; the ensuing motion of individual molecules across the surface is characterized on a site-to-site basis by in situ scanning tunneling microscopy. Adsorbate motion both along and perpendicular to the rows of the Cu110 surface occurs readily, in marked contrast to the behavior seen for equilibrium diffusion processes. The experimental findings for the probability and direction of the molecular motion can be understood as a manifestation of strong coupling between the adsorbates' lateral degrees of freedom and the substrate electronic excitation produced by the femtosecond laser radiation.     

Real-time observation of bimodal proton transfer in acid-base pairs in water

The neutralization reaction between an acid and a base in water, triggered after optical excitation, was studied by femtosecond vibrational spectroscopy. Bimodal dynamics were observed. In hydrogen-bonded acid-base complexes, the proton transfer proceeds extremely fast (within 150 femtoseconds). In encounter pairs formed by diffusion of uncomplexed photoacid and base molecules, the reaction upon contact was an order of magnitude slower, in agreement with earlier reported values. These results call for a refinement of the traditional Eigen-Weller picture of acid-base reactions: A three-stage model is introduced to account for all observed dynamics.     

Energy transfer across a metal film mediated by surface plasmon polaritons

Coupled surface plasmon polaritons (SPPs) are shown to provide effective transfer of excitation energy from donor molecules to acceptor molecules on opposite sides of metal films up to 120 nanometers thick. This variant of radiative transfer should allow directional control over the flow of excitation energy with the use of suitably designed metallic nanostructures, with SPPs mediating transfer over length scales of 10(-7) to 10(-4) meters. In the emerging field of nanophotonics, such a prospect could allow subwavelength-scale manipulation of light and provide an interface to the outside world.     

Inverse velocity dependence of vibrationally promoted electron emission from a metal surface

All previous experimental and theoretical studies of molecular interactions at metal surfaces show that electronically nonadiabatic influences increase with molecular velocity. We report the observation of a nonadiabatic electronic effect that follows the opposite trend: The probability of electron emission from a low-work function surface--Au(111) capped by half a monolayer of Cs--increases as the velocity of the incident NO molecule decreases during collisions with highly vibrationally excited NO(X(2)pi((1/2)), V = 18; V is the vibrational quantum number of NO), reaching 0.1 at the lowest velocity studied. We show that these results are consistent with a vibrational autodetachment mechanism, whereby electron emission is possible only beyond a certain critical distance from the surface. This outcome implies that important energy-dissipation pathways involving nonadiabatic electronic excitations and, furthermore, not captured by present theoretical methods may influence reaction rates at surfaces.     

Direct observation of molecular preorganization for chirality transfer on a catalyst surface

The chemisorption of specific optically active compounds on metal surfaces can create catalytically active chirality transfer sites. However, the mechanism through which these sites bias the stereoselectivity of reactions (typically hydrogenations) is generally assumed to be so complex that continued progress in the area is uncertain. We show that the investigation of heterogeneous asymmetric induction with single-site resolution sufficient to distinguish stereochemical conformations at the submolecular level is finally accessible. A combination of scanning tunneling microscopy and density functional theory calculations reveals the stereodirecting forces governing preorganization into precise chiral modifier-substrate bimolecular surface complexes. The study shows that the chiral modifier induces prochiral switching on the surface and that different prochiral ratios prevail at different submolecular binding sites on the modifier at the reaction temperature.