Ulnar interlocking intramedullary nail stabilization of a proximal radio-ulnar fracture in a dog

Objective: To report use of an ulnar interlocking intramedullary nail for repair of an open highly comminuted fracture of the proximal third of the antebrachium in a dog, caused by gunshot. Study Design: Case report. Animals: 1.5‐year old, 60 kg, neutered male Mastiff. Methods: An ulnar interlocking intramedullary nail was used to stabilize an open comminuted proximal antebrachial fracture and a cast applied for 4 weeks. Results: Union by secondary bone healing occurred in 8 weeks. At 16 weeks, there was advanced remodeling of the radial and ulnar bony callus and fracture lines were no longer evident. Limb use was normal with normal pain free range of motion of the right elbow. Conclusion: Ulnar interlocking nail is a viable alternative treatment for highly comminuted fracture of the proximal third of the antebrachium in dogs.     

Intramedullary interlocking nail stabilisation of 21 humeral fractures in 19 dogs and one cat

OBJECTIVE: To assess the suitability of the intramedullary interlocking nail to stabilise humeral diaphyseal fractures in dogs and cats. METHOD: This multi-centre study retrospectively examined medical records, between June 1994 and May 2001, of 19 dogs and one cat, in which a total of 21 humeral fractures were stabilised with intramedullary interlocking nails. RESULTS: Animals ranged in body-weight from 4 to 97 kg. Eighteen (86%) of the fractures were comminuted. Adjunctive stabilisation was used in twelve (57%) fractures and bone grafts in nine (43%) fractures. A rapid return of function was noted in the majority of animals, with 14 (67%) having good or excellent function within four days of surgery. In two fractures the repair collapsed when a single proximal transcortical screw was placed cranial to the tricipital line of the humerus. This suggests that if a single transcortical screw is placed proximally the screw should be distal or caudal to the tricipital line in order to engage sufficient cortical bone. Eighteen (86%) of the fractures healed when stabilised with intramedullary interlocking nails. Three fractures did not heal. One was in a dog where a pathological fracture was temporarily stabilised with an intramedullary interlocking nail, one in a dog that died of an abdominal crisis three weeks after surgery and one in a dog in which fracture stabilisation collapsed due to incorrect implant selection. CONCLUSION: Intramedullary interlocking nails are well suited to the stabilisation of humeral diaphyseal fractures in dogs and cats.     

In Vivo Evaluation of Intramedullary Interlocking Nail Fixation of Transverse Femoral Osteotomies in Foals

Objective—To evaluate an intramedullary interlocking nail for stabilization of transverse femoral osteotomies in foals.
Study Design—A transverse osteotomy and restabilization with an intramedullary interlocking nail was performed on the right femur in three foals and the left femur in three foals. Animals—Six foals weighing 149 to 207 kg.
Methods—The femur was destabilized with a transverse middiaphyseal osteotomy and repaired with a 0.5-in (12.7 mm) interlocking nail. The implanted femurs were radiographed monthly until completion of the study 6 months after surgery. At the completion of the study, all foals were observed for evidence of lameness, gluteal thickness was determined by ultrasonographic measurement, and a necropsy was performed.
Results—Healing was satisfactory in all foals. Five of the six had osseous bridging of the osteotomy apparent radiographically by 3 to 4 months. The sixth foal had postoperative infection but was healed radiographically in 5 months. There was a mean decrease in gluteal muscle thickness of 6.6 mm ( P = .04) in the operated limb of the five foals that healed without complication. Two foals were lame at the completion of the project; one foal with varus deformities of the contralateral limb was mechanically lame, and another was grade 2/5 lame on the operated limb. On necropsy, there was circumferential enlargement of the diaphysis of all operated limbs with the majority of the callus at the cranial and medial aspects of the cortex. All nails were solid within the medullary cavity.
Conclusions —The intramedullary interlocking nail provided adequate stabilization for repair of the transverse osteotomy.
Clinical Relevance —Further investigation is warranted before use for stabilization of spontaneously occurring fracture configurations.     

In vitro cyclic biomechanical properties of an interlocking equine tibial nail

OBJECTIVE: To determine cyclic biomechanical properties of gap osteotomized adult equine tibiae stabilized with an equine interlocking nail (EIN). STUDY DESIGN: In vitro experimental biomechanical investigation. SAMPLE POPULATION: Thirteen adult equine cadaveric tibiae. METHODS: Adult equine tibiae with transverse, midshaft, 1-cm gap osteotomies, stabilized with an equine interlocking nail, underwent cyclic biomechanical testing in vitro under axial compression, 4-point bending, and torsion. Different specimens were subjected to different load levels that represented estimated in vivo loads at 2 Hz for 740,000 cycles. Fatigue life and gap strain were calculated. RESULTS: Compression and bending, but not torsional, fatigue life were longer than time necessary for bone healing. Compressive, but not bending or torsional, gap strains were small enough to be compatible with fracture healing by primary bone formation. Gap strains for compressive, bending, and torsional loads were compatible with indirect, or secondary, bone formation. CONCLUSIONS: Further modification should be made to the equine interlocking nail to increase bending stiffness and torsional fatigue life. CLINICAL RELEVANCE: The stainless steel equine intramedullary interlocking nail is unlikely to provide appropriate long-term stability for fracture healing in adult equine tibiae without modifications in the nail design and material.     

Tibiotarsal fracture repair in a bald eagle (Haliaeetus leucocephalus) using an interlocking nail.

A 14-yr-old, 5.13-kg bald eagle (Haliaeetus leucocephalus) was hit by a car and presented to the Michigan State University Small Animal Clinic with an open, grade II, transverse, midshaft, Winquist-Hansen type-II-comminuted left tibiotarsal fracture. The fracture was reduced and fixation established with a 4.7-mm-diameter, 112-mm-long, four-hole veterinary intramedullary interlocking nail maintained in position by single 2-mm transcortical screws placed in the main proximal and distal fragments. The bird was weight bearing on the bandaged limb 48 hr postoperatively. Radiographs obtained 4 wk postoperatively revealed bridging callus over three of four cortices. The bird was released after 5 mo of rehabilitation.     

Repair of diaphyseal femoral fractures in cats using interlocking intramedullary nails: 12 cases (1996-2000).

OBJECTIVE: To determine the outcome of femoral fractures repaired with 4.0- and 4.7-mm interlocking intramedullary nails in cats. DESIGN: Retrospective study. ANIMALS: 12 cats with diaphyseal femoral fractures. PROCEDURE: Records of all cats in which the 4.0- and 4.7-mm interlocking nail system was used for repair of diaphyseal femoral fractures at the Animal Medical Center and Florida Veterinary Specialists between 1996 and 2000 were reviewed. Information included signalment, type of fracture, size of the implant, details of the surgery, intra- and postoperative complications, fracture healing, and clinical outcome. RESULTS: Femoral fractures in 12 cats were repaired. Eleven of the fractures were comminuted, with 2 of these being open. Clinical outcome was excellent in 7 cats, good in 3, and fair in 1. One resulted in a nonunion. Complications included screw breakage (1 cat) and fracture distal to the nail (1). Fracture distal to the nail occurred from a second trauma. CONCLUSION AND CLINICAL RELEVANCE: Use of the interlocking nail has been limited in cats because of the small diameter of the medullary canal. Use of the 4.0-mm nail will allow for greater application of this implant in small patients. Results of this study indicate that the 4.0- and 4.7-mm interlocking nails can be used to repair simple or comminuted diaphyseal femoral fractures in cats.     

An in vitro biomechanical investigation of an MP35N intramedullary interlocking nail system for repair of third metacarpal fractures in adult horses

OBJECTIVE: To compare monotonic mechanical properties of gap-ostectomized third metacarpal bones (MC3) stabilized with an MP35N interlocking nail system with contralateral intact bones. ANIMALS OR SAMPLE POPULATION: Twenty-four pairs of cadaveric equine MC3s. METHODS: Third metacarpal bones were divided into 4 mechanical testing groups (6 pairs per group): compression, palmarodorsal (PD) and mediolateral (ML) 4-point bending, and torsion. One MC3 from each pair was randomly selected as an intact specimen, and the contralateral gap ostectomized bone was stabilized with a 4-hole, 14-mm-diameter, 250-mm-long, MP35N intramedullary nail, and four, 7-mm-diameter, 60-mm-long MP35N interlocking screws (constructs). Mechanical testing properties were compared between intact specimens and constructs with a paired t test (significance set at P <.05). RESULTS: Intact specimens were significantly stronger and stiffer than constructs in all testing modes except PD bending. Constructs achieved mean yield strengths that were 57% (compression), 81% (PD bending), 68% (ML bending), and 78% (torque) of intact specimens. Constructs achieved mean stiffnesses that were 53% (compression), 58% (PD bending), 41% (ML bending), and 47% (torque) of intact specimens. CONCLUSION: Monotonic yield mechanical properties of MP35N intramedullary interlocking nail-stabilized, gap-ostectomized MC3 were lower than those of paired intact bones but exceeded reported in vivo loads for dorsopalmar bending and compression and estimated in vivo torsional loads. CLINICAL RELEVANCE: Considering the benefits associated with intramedullary interlocking nail fixation of fractures, this system should be considered for use for repair of MC3 fractures with applicable fracture configurations.     

In vitro biomechanical comparison of a plate-rod combination-construct and an interlocking nail-construct for experimentally induced gap fractures in canine tibiae

OBJECTIVE: To compare structural properties of a plate-rod combination-bone construct (PRCbc) and interlocking nail-bone construct (ILNbc) by use of an experimentally induced gap fracture in canine tibiae. SAMPLE POPULATION: 12 paired canine tibiae. PROCEDURE: Specimens were implanted with a plate-rod combination consisting of a 3.5-mm, limited-contact, dynamic-compression plate combined with an intramedullary rod or 6-mm interlocking nail. Ostectomy (removal of 10-mm segment) was performed. Paired constructs were loaded for bending, compression, or torsion measurements (4 constructs/group). Compliance was determined by fitting regression lines to the load-position curves at low (initial compliance) and high (terminal compliance) loads. RESULTS: Bending compliances did not differ significantly between constructs. For the ILNbc, initial compliance was greater than terminal compliance in compression and torsion. Initial compliance and terminal compliance for the PRCbc were similar in compression and torsion. Initial compliance in compression and torsion was greater for the ILNbc, compared with initial compliance for the PRCbc. Maximum deformations in bending and compression were similar between constructs; however, maximum torsional angle was significantly greater for the ILNbc, compared with values for the PRCbc. CONCLUSIONS AND CLINICAL RELEVANCE: The study documented that for an experimentally induced gap fracture in canine tibiae, a plate-rod combination is a significantly less compliant fixation method in torsion and compression, compared with an interlocking nail. Considering the deleterious effects of torsional deformation on bone healing, a plate-rod combination may represent a biomechanically superior fixation method, compared with an interlocking nail, for the treatment of dogs with comminuted tibial diaphyseal fractures.     

Veterinary interlocking nailing and its augmentation for fracture repair

The present review informs about the current status regarding use of interlocking nailing for fracture repair in animals. The clinical limitations of interlocking nailing and its subsequent improvement by evolving novel nail design or supplementation with type I ESF using hybrid nail bolt/ESF pin has been dealt. The biomechanical and clinical evaluation of novel interlocking nail supplements and its possible clinical use is included.     

Evaluation of fixation devices for prevention of rotation in transverse fractures of the canine femoral shaft: an in vitro study

The effectiveness of various fixation techniques in preventing rotation of fracture segments in transverse fractures of the canine femoral diaphysis was evaluated under laboratory conditions. Single intramedullary Steinmann pins, single Küntscher nails, multiple intramedullary Steinmann pins, and an intramedullary Steinmann pin with a 1/2 Kirschner splint fixation sustained mean torque moments of 0.31, 0.61, 1.26, and 1.63 Newton meters, respectively, before rotation of the fracture segments occurred. Four-pin (full Kirschner) splints were more effective, sustaining a mean torque moment of 5.35 Newton meters before rotation occurred. The canine femoral medullary canal had an average isthmus length of 2.0 to 2.5 cm. The restricted area of implant-cortex contact limited the effectiveness of the intramedullary fixation devices in preventing fracture segment rotation.     

An in vitro biomechanical investigation of an intramedullary nailing technique for repair of third metacarpal and metatarsal fractures in neonates and foals

OBJECTIVE: To evaluate a dorsoproximal extra-articular approach for insertion of 8.25-mm, solid-titanium, intramedullary (IM) interlocking nails into ostectomized foal third metacarpal (MC3) and third metatarsal (MT3) bones; to compare the monotonic mechanical properties of IM nail constructs with paired intact bones; and to determine the effects of age, body weight, fore- or hindlimb, and left or right limb on the mechanical testing variables. ANIMAL OR SAMPLE POPULATION: Twenty bone pairs (10 MC3, 10 MT3) collected from 10 foals of various weights and ages. METHODS: One bone from each pair was randomly selected to be ostectomized and stabilized using an 8.25-mm, solid-titanium IM nail, and four 3.7-mm titanium interlocking screws (construct). Constructs and contralateral intact bone specimens were tested in axial compression and palmaro-/plantarodorsal (PD) 4-point bending. Monotonic mechanical properties were compared between intact specimens and constructs with an ANOVA; significance was set at P <.05. RESULTS: Nail insertion caused bone failure in 6 MC3 and 2 MT3. In general, mean mechanical testing values indicated that intact specimens were significantly stronger and stiffer than constructs for all age and weight ranges when tested in compression and PD 4-point bending (P <.05). Bone strength and stiffness of intact specimens tested in compression and bending tended to increase linearly with age and weight. CONCLUSION: IM interlocking nail fixation of gap-ostectomized MC3 and MT3 with 8.25-mm IM nails and 3.7-mm interlocking screws did not achieve sufficient strength or stiffness to be recommended as the sole means of repair for comminuted MC3 and MT3 fractures in young foals. CLINICAL RELEVANCE: IM interlocking nail fixation of foal cannon bone fractures may be useful to decrease soft-tissue disruption at the fracture site; however, there is a risk of bone failure associated with extra-articular insertion. This method should be combined with other forms of external coaptation for added stability in axial compression and PD bending.     

Rotational strength of double-pinning techniques in repair of transverse fractures in femurs of dogs

Transverse midshaft fractures of femurs from freshly euthanatized dogs were stabilized by means of 6 methods: (1) 3.5-mm bone plate and screws, (2) single intramedullary pin, (3) double intramedullary pins retrograded proximally and driven distally to the level of the femoral trochlea, (4) double intramedullary pins retrograded distally and driven proximally into the trochanteric region, (5) double intramedullary pinning in Rush pin fashion, and (6) multiple intramedullary pinning that filled the medullary cavity at the fracture site. All bones were subjected to torsional stress. The measured strain was converted to forces of torque and correlated with bone diameter to normalize the data. The forces of torque from each fixation technique were compared with each other and with the mean torque force necessary to fracture intact femurs. Torsional shear applied to plated femurs resulted in failure at a mean level of 33.8% of the calculated theoretic moment. Torsional forces were concentrated at one end of the plate and catastrophically failed at that point, whereas the fracture site remained rigidly fixed. There was no significant difference in the initial moment of torsional failure between the single intramedullary pin technique (0.05 Nm) and the double-pinning techniques (0.03 to 0.04 Nm). The multiple-pinning technique was 1.8 to 3 times as effective in resisting rotational forces, compared with the other pinning techniques, but not significantly so.     

Multiple Intramedullary Wire Fixation of a Radial Fracture in a Dog

Multiple intramedullary wire fixation infrequently can be used as an alternative technique to plating, transfixation devices, single intramedullary pinning, or external coaptation for some radius and ulna fractures.
This report describes a comminuted fracture of the radius and ulna with fissures and comminution extending too far into the proximal radius for effective application of a bone plate or Kirschner-Ehmer apparatus. Resulting fracture instability and collapse prohibited effective use of external coaptation as a primary means of fixation. The radial fracture was repaired and stabilized with full cerclage wires and multiple intramedullary Kirschner wires. The dog was using the leg normally 12 months following surgery.     

Fracture healing after stabilization with intramedullary xenograft cortical bone pins: a study in pigeons

OBJECTIVE: To investigate the effectiveness of intramedullary xenograft cortical bone pins compared with stainless steel Kirschner wire for the repair of a standardized avian humeral fracture. STUDY DESIGN: Prospective randomized study. SAMPLE POPULATION: Thirty mature pigeons (Columba livia). METHODS: Birds were randomly assigned to 3 groups. Transverse mid-diaphyseal humeral fractures were created in 1 humerus in each bird. Fractures were stabilized with intramedullary ostrich or canine xenograft cortical bone pins or Kirschner wire. Radiographic, histological, and biomechanical assessments were used to compare fracture healing 6 weeks after fracture stabilization. The contralateral humerus of each bird was used as a control. RESULTS: All fractures healed regardless of intramedullary pin type. There were no statistically significant biomechanical differences among groups or within groups. Xenograft cortical bone pins induced a mononuclear inflammatory reaction that did not impair bone healing. Bones stabilized with intramedullary cortical bone pins had more periosteal callus and inflammation at the fracture site than bones stabilized with stainless steel Kirschner wires. CONCLUSIONS: Intramedullary xenograft cortical bone pins, derived from mammalian or avian sources, appear to represent an alternative for the repair of avian humeral fractures. CLINICAL RELEVANCE: Intramedullary xenograft cortical bone pins are biodegradable and may reduce the need for additional surgery to remove implants after fracture healing.     

Modified intramedullary pin technique for repair of distal femoral physeal fractures in the dog and cat

A modified intramedullary pin technique for surgical repair of distal femoral physeal fractures in dogs and cats provided stability at the fracture site and allowed early range of motion. The fixation and stability of this technique was compared with that achieved with a multiple pin technique. Fixation failure did not occur in 11 animals treated by the modified intramedullary pin technique, whereas there were 2 failures in 13 patients treated by a multiple pin technique.     

Unusual Bone Healing in a White-tailed Deer

Two sequential fractures in the left hind leg of a deer and their treatments are described. The first, a tibial fracture was treated using an intramedullary pin with full cerclage wires supported by a plaster cast. This fracture healed uneventfully. A subsequent second fracture involving the distal metatarsus was stabilized by external fixation. This fracture healed with the formation of a periosteal involucrumlike structure which encased the full length of the metatarsal bone. This involucrum was thought to be due to a sub-periosteal hematoma.     

Fracture associated sarcoma in the cat

A nine-year-old neutered male cat developed an osteosarcoma 15 months after the surgical repair of the proximal femur using an intramedullary pin at the fracture site. The repair had been effective with good healing of the fracture and restoration of normal activity.     

An In Vitro Biomechanical Investigation of an Interlocking Nail for Fixation of Diaphyseal Tibial Fractures in Adult Horses

The compressive, bending and torsional mechanical properties of osteotomized adult equine tibiae stabilized with an interlocking intramedullary nail (nail-tibia composite) were compared with those of intact tibiae to determine the clinical applicability of the nail for repair of tibial fractures in adult horses. The mean yield load, failure load, and stiffness for the nail-tibia composites were significantly less ( P < .05) than those for the intact tibiae in all loading configurations. The mean compressive yield load for the nail-tibia composites was greater than the compressive load calculated from previously reported in vivo data for walking and trotting, and was equal to the load calculated for recovery from anesthesia. The mean yield bending moment for the nail-tibia composites was greater than the bending moment previously calculated for standing, walking, and recovery from anesthesia. The mean torsional yield load for the nail-tibia composites was less than the torsional load determined for the walk from another in vivo study. The design of the interlocking nail evaluated in the present study should be modified to increase torsional and compressive yield strengths and torsional stiffness before reasonable success could be expected for the treatment of adult equine tibial fractures.     

Management of quadriceps contracture in a dog using a static flexion apparatus and physiotherapy

A four-month-old golden retriever developed quadriceps contracture following management of a comminuted femoral fracture with an intramedullary pin and cerclage wire. Management involved surgical release of the quadriceps, rigid stabilisation of the fracture, use of a static stifle flexion apparatus and postoperative physiotherapy. The dog returned to full activity with normal stifle function.     

Repair of a proximal diaphyseal femoral fracture in a calf, using intramedullary pinning, cerclage wiring, and external fixation.

Repair of a comminuted, spiral oblique, proximal diaphyseal femoral fracture in a 7-day-old calf was achieved by use of an intramedullary pin, cerclage wires, and external fixator. Six stainless steel wires were used for full cerclage to secure a long butterfly fragment and multiple incomplete and complete nondisplaced fragments to the femur in order to create 2 principal fragments. Axial alignment and resistance to bending was provided by a round, double-pointed, end-threaded intramedullary pin (6.35 mm in diameter), which was inserted in a retrograde fashion. A type-1, double-connecting-bar external fixator, using 4 round pins (4.8 mm in diameter), was used to provide supplemental stabilization against shear and torsional forces. At 45 days after surgery, healing at the fracture site was seen on radiography of the limb, and the external fixator was removed. Eight months after surgery, the calf had a normal gait.