Extractability of 2,4-D,Dicamba and MCPP from Soil

The adsorption of herbicides on soil colloids is a major factor determining their mobility, persistence, and activity in soils. Solvent extraction could be a viable option for removing sorbed contaminants in soils. This study evaluated the extractability of three herbicides: 2,4 dichlorophenoxy-acetic acid (2,4-D), 4-chloro-2-methylphenoxypropanoic acid (mecoprop acid or MCPP), and 3,6-dichloro-2-methoxybenzoic acid (dicamba). Three solvents (water, methanol, and iso-propanol) and three methods of extraction (column, batch, and soxhlet) were compared for their efficiencies in removing the herbicides from three soils (loamy sand, silt loam, and silty clay). Both linear and non-linear Freundlich isotherms were used to predict sorption intensity of herbicides on soils subjected to various extraction methods and conditions. High K_dand K_fr, and low N values were obtained for all herbicides in silty clay soil by batch extraction. Methanol was the best solvent removing approximately 97% of all added herbicides from the loamy sand either by column or soxhlet extraction method. Isopropanol ranked second by removing over 90% of all herbicides by soxhelet extraction from all three soils. However, water was ineffective in removing herbicides from any of the soils using any of the three extracting procedures used in this study. In general, the extent of herbicide removal depended on soil type, herbicide concentration, extraction procedure, solvent type and amount, and extraction time.     

Effects of Selected Surfactants on Nutrient Uptake in Corn (Zea mays L.)

Surfactants in herbicide formulations eventually enter soil and may disrupt various processes. Research examined effects on nutrient uptake in corn caused by surfactants, herbicides, and surfactant-herbicide combinations applied to silt loam and silty clay loam soils in the greenhouse. Surfactants evaluated were Activator 90, Agri-Dex, and Thrust; herbicides were glyphosate, atrazine, and bentazon. Corn was planted in fertilized soils with moisture content maintained for optimum growth. Foliage (V8 growth stage) was collected for elemental analyses. Nutrient uptake differed with soil texture. Nutrient uptake from silty clay loam was more affected by surfactants and/or herbicides than in silt loam. Potassium uptake was significantly (P = 0.05) decreased in silt loam only by Thrust but uptake of phosphorus (P), potassium (K) calcium (Ca), sulfur (S), copper (Cu), and zinc (Zn) decreased by ≤30% in silty clay loam treated with surfactants. Surfactants and/or herbicides may interact with soil texture to affect nutrient uptake. Long-term field studies to validate changes in nutrient uptake and grain yields after annual applications of surfactants plus herbicides are needed.     

Soil carbon responses to past and future CO2 in three Texas prairie soils

Changes in soil carbon storage could affect and be affected by rising atmospheric CO₂. However, it is unlikely that soils will respond uniformly, as some soils are more sensitive to changes in the amount and chemistry of plant tissue inputs whereas others are less sensitive because of mineralogical, textural, or microbial processes. We studied soil carbon and microbial responses to a preindustrial-to-future CO₂ gradient (250–500 ppm) in a grassland ecosystem in the field. The ecosystem contains three soil types with clay fractions of 15%–55%: a sandy loam Alfisol, a silty clay Mollisol, and a black clay Vertisol. Soil and microbial responses to atmospheric CO₂ are plant-mediated; and aboveground plant productivity in this ecosystem increased linearly with CO₂ in the sandy loam and silty clay. Although total soil organic carbon (SOC) did not change with CO₂ treatment after four growing seasons, fast-cycling SOC pools increased with CO₂ in the two clay soils. Microbial biomass increased 18% and microbial activity increased 30% across the CO₂ gradient in the black clay (55% clay), but neither factor changed with CO₂ in the sandy loam (15% clay). Similarly, size fractionation of SOC showed that coarse POM-C, the youngest and most labile fraction, increased four-fold across the CO₂ gradient in the black clay, but increased by only 50% across the gradient in the sandy loam. Interestingly, mineral-associated C, the oldest and most recalcitrant fraction, declined 23% across the gradient in the third soil type, a silty clay (45% clay). Our results provide evidence for priming in this soil type, as labile C availability and decomposition rate (measured as soil respiration and soil C mineralization) also increased across the CO₂ gradient in the silty clay soil. In summary, CO₂ enrichment in this grassland increased the fast-cycling SOC pool as in other CO₂ studies, but only in the two high-clay soils. Priming in the silty clay could limit SOC accumulation after prolonged CO₂ exposure. Because soil texture varies geographically, including data on soil types could enhance predictions of soil carbon and microbial responses to future CO₂ levels.     

Salinity effects on carbon mineralization in soils of varying texture

In salt-affected soils, soil organic carbon (SOC) levels are usually low as a result of poor plant growth; additionally, decomposition of soil organic matter (SOM) may be negatively affected. Soil organic carbon models, such as the Rothamsted Carbon Model (RothC), that are used to estimate carbon dioxide (CO₂) emission and SOC stocks at various spatial scales, do not consider the effect of salinity on CO₂ emissions and may therefore over-estimate CO₂ release from saline soils. Two laboratory incubation experiments were conducted to assess the effect of soil texture on the response of CO₂ release to salinity, and to calculate a rate modifier for salinity to be introduced into the RothC model. The soils used were a sandy loam (18.7% clay) and a sandy clay loam (22.5% clay) in one experiment and a loamy sand (6.3% clay) and a clay (42% clay) in another experiment. The water content was adjusted to 75%, 55%, 50% and 45% water holding capacity (WHC) for the loamy sand, sandy loam, sandy clay loam and the clay, respectively to ensure optimal soil moisture for decomposition. Sodium chloride (NaCl) was used to develop a range of salinities: electrical conductivity of the 1:5 soil: water extract (EC_1:5) 1, 2, 3, 4 and 5 dS m⁻¹. The soils were amended with 2% (w/w) wheat residues and CO₂ emission was measured over 4 months. Carbon dioxide release was also measured from five salt-affected soils from the field for model evaluation. In all soils, cumulative CO₂-C g⁻¹ soil significantly decreased with increasing EC_1:5 developed by addition of NaCl, but the relative decrease differed among the soils. In the salt-amended soils, the reduction in normalised cumulative respiration (in percentage for the control) at EC_1:5 > 1.0 dS m⁻¹ was most pronounced in the loamy sand. This is due to the differential water content of the soils, at the same EC_1:5; the salt concentration in the soil solution is higher in the coarser textured soils than in fine textured soils because in the former soils, the water content for optimal decomposition is lower. When salinity was expressed as osmotic potential, the decrease in normalised cumulative respiration with increasing salinity was less than with EC_1:5. The osmotic potential of the soil solution is a more appropriate parameter for estimating the salinity effect on microbial activity than the electrical conductivity (EC) because osmotic potential, unlike EC, takes account into salt concentration in the soil solution as a function of the water content. The decrease in particulate organic carbon (POC) was smaller in soils with low osmotic potential whereas total organic carbon, humus-C and charcoal-C did not change over time, and were not significantly affected by salinity. The modelling of cumulative respiration data using a two compartment model showed that the decomposition of labile carbon (C) pool is more sensitive to salinity than that of the slow C pool. The evaluation of RothC, modified to include the decomposition rate modifier for salinity developed from the salt-amended soils, against saline soils from the field, suggested that salinity had a greater effect on cumulative respiration in the salt-amended soils. The results of this study show (i) salinity needs to be taken into account when modelling CO₂ release and SOC turnover in salt-affected soils, and (ii) a decomposition rate modifier developed from salt-amended soils may overestimate the effect of salinity on CO₂ release.     

Response of soil exchangeable and crop potassium concentrations to variable fertilizer and cropping regimes in long-term field experiments on different soil types

Annual potassium (K) balances have been calculated over a 40‐year period for five field experiments located on varying parent materials (from loamy sand to clay) in south and central Sweden. Each experiment consisted of a number of K fertilizer regimes and was divided into two crop rotations, mixed arable/livestock (I) and arable only (II). Annual calculations were based on data for K inputs through manure and fertilizer, and outputs in crop removal. Plots receiving no K fertilizer showed negative K balances which ranged from 30 to 65 kg ha^?1 year^?1 in rotation I, compared with 10–26 kg ha^?1 year^?1 for rotation II. On sandy loam and clay soils, the K yield of nil K plots (rotation I) increased significantly with time during the experimental period indicating increasing release of K from soil minerals, uptake from deeper soil horizons and/or depletion of exchangeable soil K (K_ex). Significant depletion of K_ex in the topsoil was only found in the loamy sand indicating a K supply from internal sources in the sandy loam and clay soils. On silty clay and clay soils, a grass/clover ley K concentration of ～2% (dry weight) was maintained during the 40‐year study period on the nil K plots, but on the sandy loam, loam and loamy sand, herbage concentrations were generally less than 2% K.     

Decomposability of organic matter in particle size fractions from field soils with straw incorporation

Soils from two field experiments on straw disposal were fractionated according to particle size using ultrasonic dispersion and gravity-sedimentation in water. Samples of whole soils, clay. silt and sand-size fractions were held for 49 days at 20°C and the CO₂ evolution measured on 14 dates by gas chromatography.Recovery of soil solids. C and N was 99, 98 and 93%, respectively. Most of the soil C and N was in the clay (<2μm). (loamy sand, 50% C and 56% N; sandy loam. 65% C and 68% N), the silt (2–20 μm) having smaller proportions (loamy sand, 41% C and 38% N; sandy loam. 29% C and 27% N). The sand fraction (20–6000 μm) accounted for 4–7% of the organic matter, and 1–2% of the C was water soluble. Straw incorporation generally increased the C and N content of whole soils and size fractions.The decomposition rate constants were higher for the sandy loam than for the loamy sand soil. For both soils, the decomposability of the organic matter decreased in the order: sand > clay ⩾ whole soil > silt. Straw incorporation increased the decomposition rate of whole soil and sand organic matter. whereas the effect of straw on clay and silt respiration was small.Between 58 and 73% of the respiration was from clay, 21–25% from silt and 6–19% from the sand size fraction.     

Sorption-desorption of two "aged" sulfonylaminocarbonyltriazolinone herbicide metabolites in soil

Aging (herbicide-soil contact time) has been shown to significantly affect the sorption-desorption characteristics of many herbicides, which in turn can affect the availability of the herbicide for transport, plant uptake, and microbial degradation. In contrast, very little work in this area has been done on herbicide metabolites in soil. The objective of this study was to characterize the sorption-desorption of sulfonylaminocarbonyltriazolinone herbicide metabolites incubated in soils at different soil moisture potentials. A benzenesulfonamide metabolite and a triazolinone metabolite from sulfonylaminocarbonyltriazolinone herbicides were incubated in clay loam and loamy sand soils for up to 12 weeks at -33 kPa and at water contents equivalent to 50 and 75% of that at -33 kPa. Chemicals were extracted sequentially with 0.01 N CaCl(2) and aqueous acetonitrile (solution and sorbed phase concentrations, respectively), and apparent sorption coefficients (K(d,app)) were calculated. Sufficient metabolite remained during the incubation (>55% of applied) to allow determination of the coefficients. The initial aging period (2 weeks after application) significantly increased sorption as indicated by increased K(d,app) values for the chemical remaining, after which they remained relatively constant. After 12 weeks of incubation at -33 kPa, K(d,app) values for benzenesulfonamide and triazolinone increased by a factor of 3.5 in the clay loam soil and by a factor of 5.9 in the loamy sand as compared to freshly treated soils. There was no effect of moisture potential on aged apparent K(d,app) values. These data show the importance of characterization of sorption-desorption in aged herbicide residues, including metabolites, in soil, particularly in the case of prediction of herbicide residue transport in soil. In this case, potential transport of sulfonylaminocarbonyltriazolinone herbicide metabolites would be overpredicted if freshly treated soil K(d) values were used to predict transport.     

Effects of N placement,carbon distribution and temperature on N2O emissions in clay loam and loamy sand soils

Changes in the profile distribution of soil C stocks for conventional versus no‐tillage can affect N₂O losses. Uncertainty remains whether deep N placement into a wetter layer in humid areas would affect N₂O losses. This study evaluated the effects of soil carbon profile distribution (inverted, normal), depth of nitrogen placement (5 cm, 15 cm), temperature (10, 20 and 30 °C) and soil texture (clay loam, loamy sand) on N₂O emissions from soil cores in a 216‐h incubation after simulated rainfall. N₂O losses were larger from the clay loam than from the loamy sand, and cumulative N₂O emissions from the inverted profile, with greater C levels at depth, were more than those from the profile with more C near the upper surface. Cumulative N₂O losses from the inverted clay loam profile with deep N placement (1.16 mg N per kg dry soil; 0.71% of applied N) on average were almost double those in the loamy sand (0.62 mg N per kg dry soil; 0.42%). The smallest N₂O losses were measured from the profiles with more C close to the upper surface with a shallow placement of N for the clay loam (0.19 mg N per kg dry soil; 0.12%) and loamy sand (0.33 mg N per kg dry soil; 0.23%). An exponential relationship between N₂O fluxes and temperature was measured. We conclude that large N₂O losses may occur under the combination of greater soil C content at deeper layers (ploughed soils) and moist profiles after N application (humid regions). Deep N placement appears to aggravate rather than ameliorate these concerns.     

水稻土中外源铅和苄嘧磺隆交互作用对碳源矿化的影响

Little information is available on the interactive effects of inorganic and organic pollutants on carbon utilization by soil microorganisms.This study examined the effects of two common soil pollutants,lead (Pb) and bensulfuron-methyl herbicide (BSM),on decomposition of an adscititious carbon source (¹⁴C-glucose).Two contrasting paddy soils,a silty clay soil and a clay loam soil,were incubated with different concentrations and combinations of pollutants for 60 days.Orthogonal rotatable central composite design was adopted to design the combinations of the pollutant concentrations so that rate response curves could be derived.Rapid decomposition of ¹⁴C-glucose occurred in the first three days for both soils where no Pb or BSM was added (control).Overall,63%-64% of the added ¹⁴C-glucose was decomposed in the control over the 60-day incubation.The addition of Pb or BSM significantly decreased the decomposition of ¹⁴C-glucose during the first week but increased the decomposition thereafter;as a result,the percentages of ¹⁴C-glucose decomposed (57%-77%) over the 60-day period were similar to or higher than those of the control.Application of the pollutants in combination did not further inhibit decomposition compared with the control.Overall,decomposition rates were lower in the silty clay soil than in the clay loam soil,which was related to the soil texture,cation exchange capacity,and pH.The relationship between the decomposition rates and the pollutants could be well characterized by the quadratic regression orthogonal rotation model.The initial antagonistic effects of the pollutants followed by the synergistic effects on microbial activity might result from changes of the concentrations of the pollutants.     

Organic carbon mineralization responses to temperature increases in subtropical paddy soils

Purpose

Understanding organic carbon mineralization and its temperature response in subtropical paddy soils is important for the regional carbon balance. There is a growing interest in factors controlling soil organic carbon (SOC) mineralization because of the potential for climate change. This study aims to test the hypothesis that soil clay content impedes SOC mineralization in subtropical paddy soils.

Materials and methods

A 160-day laboratory incubation at temperatures from 10 to 30 °C and 90% water content was conducted to examine the dynamics of SOC mineralization and its temperature response in three subtropical paddy soils with different clay contents (sandy loam, clay loam, and silty clay soils). A three-pool SOC model (active, slow, and resistant) was used to fit SOC mineralization.

Results and discussion

Total CO₂ evolved during incubation following the order of clay loam > silty clay > sandy loam. The temperature response coefficients (Q ₁₀) were 1.92?±?0.39, 2.36?±?0.22, and 2.10?±?0.70, respectively, for the sandy loam soil, clay loam soil, and silty clay soil. But the soil clay content followed the order of silty clay > clay loam > sandy loam. The sandy loam soil neither released larger amounts of CO₂ nor showed higher temperature sensitivity, as expected, even though it contains lower soil clay content among the three soils. It seems that soil clay content did not have a dominant effect which results in the difference in SOC mineralization and its temperature response in the selected three paddy soils. However, dissolved organic carbon (DOC; representing substrate availability) had a great effect. The size of the active C pool ranged from 0.11 to 3.55% of initial SOC, and it increased with increasing temperature. The silty clay soil had the smallest active C pool (1.40%) and the largest Q ₁₀ value (6.33) in the active C pool as compared with the other two soils. The mineralizable SOC protected in the silty clay soil, therefore, had even greater temperature sensitivity than the other two soils that had less SOC stabilization.

Conclusions

Our study suggests that SOC mineralization and its temperature response in subtropical paddy soils were probably not dominantly controlled by soil clay content, but the substrate availability (represented as DOC) and the specific stabilization mechanisms of SOC may have great effects.     

Sorption-desorption of "aged" sulfonylaminocarbonyltriazolinone herbicides in soil

Sorption-desorption interactions of pesticides with soil determine the availability of pesticides in soil for transport, plant uptake, and microbial degradation. These interactions are affected by the physical and chemical properties of the pesticide and soil, and for some pesticides, their residence time in the soil. The objective of this study was to characterize sorption-desorption of two sulfonylaminocarbonyltriazolinone herbicides incubated in soils at different soil moisture potentials. The chemicals were incubated in clay loam and loamy sand soils for up to 12 wks at -33 kPa and at water contents equivalent to 50 and 75% of that at -33 kPa. Chemicals were extracted sequentially with 0.01 N CaCl(2) and aqueous acetonitrile, and sorption coefficients were calculated. Sufficient sulfonylaminocarbonyltriazolinone herbicides remained (>40% of that applied) during incubation to allow calculation of sorption coefficients. Aging significantly increased sorption as indicated by increased sorption coefficients. For instance, for sulfonylaminocarbonyltriazolinone remaining after a 12-wk incubation at -33 kPa, K(d) increased by a factor of 4.5 in the clay loam soils and by 6.6 in the loamy sand as compared to freshly treated soils. There was no effect of moisture potential on sorption K(d) values. These data show the importance of characterization of sorption-desorption in aged herbicide residues in soil, particularly in the case of prediction of herbicide transport in soil. In this case, potential transport of sulfonylaminocarbonyltriazolinone herbicides would be over-predicted if freshly treated soil K(d) values were used to predict transport.     

Soil texture affects soil microbial and structural recovery during grassland restoration

Many biotic and abiotic factors influence recovery of soil communities following prolonged disturbance. We investigated the role of soil texture in the recovery of soil microbial community structure and changes in microbial stress, as indexed by phospholipid fatty acid (PLFA) profiles, using two chronosequences of grasslands restored from 0 to 19 years on silty clay loam and loamy fine sand soils in Nebraska, USA. All restorations were formerly cultivated fields seeded to native warm-season grasses through the USDA’s Conservation Reserve Program. Increases in many PLFA concentrations occurred across the silty clay loam chronosequence including total PLFA biomass, richness, fungi, arbuscular mycorrhizal fungi, Gram-positive bacteria, Gram-negative bacteria, and actinomycetes. Ratios of saturated:monounsaturated and iso:anteiso PLFAs decreased across the silty clay loam chronosequence indicating reduction in nutrient stress of the microbial community as grassland established. Multivariate analysis of entire PLFA profiles across the silty clay loam chronosequence showed recovery of microbial community structure on the trajectory toward native prairie. Conversely, no microbial groups exhibited a directional change across the loamy fine sand chronosequence. Changes in soil structure were also only observed across the silty clay loam chronosequence. Aggregate mean weighted diameter (MWD) exhibited an exponential rise to maximum resulting from an exponential rise to maximum in the proportion of large macroaggregates (>2000 μm) and exponential decay in microaggregates (<250 μm and >53 μm) and the silt and clay fraction (<53 μm). Across both chronosequences, MWD was highly correlated with total PLFA biomass and the biomass of many microbial groups. Strong correlations between many PLFA groups and the MWD of aggregates underscore the interdependence between the recovery of soil microbial communities and soil structure that may explain more variation than time for some soils (i.e., loamy fine sand). This study demonstrates that soil microbial responses to grassland restoration are modulated by soil texture with implications for estimating the true capacity of restoration efforts to rehabilitate ecosystem functions.     

Crop yield and SOC responses to biochar application were dependent on soil texture and crop type in southern Quebec,Canada

Changes to soil nutrient availability and increases for crop yield and soil organic C (SOC) concentration on biochar‐amended soil under temperate climate conditions have only been reported in a few publications. The objective of this work was to determine if biochar application rates up to 20 Mg ha^?1 affect nutrient availability in soil, SOC stocks and yield of corn (Zea mays L.), soybean (Glycine max L.), and switchgrass (Panicum virgatum L.) on two coarse‐textured soils (loamy sand, sandy clay loam) in S Quebec, Canada. Data were collected from field experiments for a 3‐y period following application of pine wood biochar at rates of 0, 10, and 20 Mg ha^?1. For corn plots, at harvest 3 y after biochar application, 20 Mg biochar ha^?1 resulted in 41.2% lower soil NH on the loamy sand; the same effect was not present on the sandy clay loam soil. On the loamy sand, 20 Mg biochar ha^?1 increased corn yields by 14.2% compared to the control 3 y after application; the same effect was not present on the sandy clay loam soil. Biochar did not alter yield or nutrient availability in soil on soybean or switchgrass plots on either soil type. After 3 y, SOC concentration was 83 and 258% greater after 10 and 20 Mg ha^?1 biochar applications, respectively, than the control in sandy clay loam soil under switchgrass production. The same effect was not present on the sandy clay loam soil. A 67% higher SOC concentration was noted with biochar application at 20 Mg ha^?1 to sandy clay loam soil under corn.     

Nitrogen availability to grain sorghum from organic and inorganic sources on sandy and clayey soil surfaces in a greenhouse pot study

In a greenhouse pot study, we examined the availability of N to grain sorghum from organic and inorganic N sources. The treatments were¹⁵N-labeled clover residues, wheat residues, and fertilizer placed on a sandy clay loam and loamy sand soil surface for an 8-week period. Soil aggregates formed under each soil texture were measured after 8 weeks for each treatment. Significantly greater ¹⁵N was taken up and recovered by grain sorghum in sandy clay loam pots compared with loamy sand pots. Greater ¹⁵N recovery was consistently observed with the inorganic source than the organic sources regardless of soil texture or time. Microbial biomass C and N were significantly greater for sandy clay loam soil compared with the loamy sand. Microbial biomass ¹⁵N was also significantly greater in the sandy clay loam treatment compared to the loamy sand. The fertilizer treatment initially had the greatest pool of microbial biomass ¹⁵N but decreased with time. The crop residue treatments generally had less microbial biomass ¹⁵N with time. The crop residues and soil texture had a significant effect on the water-stable aggregates formed after 8 weeks of treatments. Significantly greater water-stable aggregates were formed in the sandy clay loam than the loamy sand. Approximately 20% greater water-stable aggregates were formed under the crop residue treatments compared to the fertilizer only treatment. Soil texture seemed to be one of the most important factors affecting the availability of N from organic or inorganic N sources in these soils.Contribution from the MissouriAgricultural Experiment Station, Journal Series No.12131     

Fate of diuron and terbuthylazine in soils amended with two-phase olive oil mill waste

The addition of organic amendments to soil increases soil organic matter content and stimulates soil microbial activity. Thus, processes affecting herbicide fate in the soil should be affected. The objective of this work was to investigate the effect of olive oil production industry organic waste (alperujo) on soil sorption-desorption, degradation, and leaching of diuron [3-(3,4-dichlorophenyl)-1,1-dimethylurea] and terbuthylazine [N2-tert-butyl-6-chloro-N4-ethyl-1,3,5-triazine-2,4-diamine], two herbicides widely used in olive crops. The soils used in this study were a sandy soil and a silty clay soil from two different olive groves. The sandy soil was amended in the laboratory with fresh (uncomposted) alperujo at the rate of 10% w/w, and the silty clay soil was amended in the field with fresh alperujo at the rate of 256 kg per tree during 4 years and in the laboratory with fresh or composted alperujo. Sorption of both herbicides increased in laboratory-amended soils as compared to unamended or field-amended soils, and this process was less reversible in laboratory-amended soils, except for diuron in amended sandy soil. Addition of alperujo to soils increased half-lives of the herbicides in most of the soils. Diuron and terbuthylazine leached through unamended sandy soil, but no herbicide was detected in laboratory-amended soil. Diuron did not leach through amended or unamended silty clay soil, whereas small amounts of terbuthylazine were detected in leachates from unamended soil. Despite their higher sorption capacity, greater amounts of terbuthylazine were found in the leachates from amended silty clay soils. The amounts of dissolved organic matter from alperujo and the degree of humification can affect sorption, degradation, and leaching of these two classes of herbicides in soils. It appears that adding alperujo to soil would not have adverse impacts on the behavior of herbicides in olive production.     

Data transformations between soil texture schemes

Various soil texture schemes are in current use. These differ in the size ranges of their particle fractions. There is a need to establish simple methods to correlate these conventional schemes. Therefore I have defined closed-form exponential and power law functions to fit models to cumulative particle-size distribution data. I have tested the functions for their suitability (i) to represent cumulative particle-size distribution curves and (ii) to transfer data between distributions that differ in the size ranges of the particle fractions. I found that closed-form exponential functions adequately represent the cumulative particle-size distributions of fine-textured soils (clay, silty clay, silty clay loam, clay loam, silt loam and loam texture), whilst closed-form power functions better describe the cumulative particle-size distributions of coarse-textured soils (sand, loamy sand, sandy loam, sandy clay and sandy clay loam texture). The functions defined are found to be suitable to transfer data between different texture schemes. The use of this approach is illustrated by examples of data transformations between three widely used soil texture schemes: ISSS, Katschinski's and USDA.     

Short- and long-term effects of heavy metals on phosphatase activity in soils: An ecological dose-response model approach

Summary The aim of this study was to provide manageable data to help establish permissible limits for the pollution of soil by heavy metals. Therefore the short-and long-term effects of heavy metal pollution on phosphatase activity was studied in five different soil types. The results are presented graphically as logistic dose-response curves. It was possible to construct a curve for sand and silty loam soil but it was more difficult to establish a curve for sandy loam and clay soil and nearly impossible (except for Cu) for peat. The toxicity of the various metals can be compared on the basis of mmol values. In clay soils, for Cd, Cr, Cu, and Zn, the 50% effective ecological dose (ED₅₀) values were comparable (approximately 45 mmol kg^–1), but the ED₁₀ values were very different, at 7.4, 41.4, 15.1, and 0.55, respectively. At the ED₅₀ value, toxicity did not decrease with time and, in sandy soils, was approximately 2.6 mmol kg ^–1 dry soil for Cd, Cu, and Zn. In four out of five soils, the Cd toxicity was higher 1.5 years after the addition of heavy metal salts than after 6 weeks. Toxicity was least in the sandy loam, silty loam, and clay soil, and varied in general between 12 and 88 mmol kg^–1. In setting limits, the criteria selected (no-effect level, ED₁₀ or ED₅₀) determine the concentration and also the toxicity of the sequence. It is suggested that the data presented here could be very useful in helping to set permissible limits for heavy metal soil pollution.     

Impact of addition of different rates of rice-residue biochar on C and N dynamics in texturally diverse soils

Impacts of crop residue biochar on soil C and N dynamics have been found to be subtly inconsistent in diverse soils. In the present study, three soils differing in texture (loamy sand, sandy clay loam and clay) were amended with different rates (0%, 0.5%, 1%, 2% and 4%) of rice-residue biochar and incubated at 25°C for 60 days. Soil respiration was measured throughout the incubation period whereas, microbial biomass C (MBC), dissolved organic C (DOC), NH₄⁺-N and NO₃^–N were analysed after 2, 7, 14, 28 and 60 days of incubation. Carbon mineralization differed significantly between the soils with loamy sand evolving the greatest CO₂ followed by sandy clay loam and clay. Likewise, irrespective of the sampling period, MBC, DOC, NH₄⁺-N and NO₃^–N increased significantly with increasing rate of biochar addition, with consistently higher values in loamy sand than the other two soils. Furthermore, regardless of the biochar rates, NO₃^–-N concentration increased significantly with increasing period of incubation, but in contrast, NH₄⁺-N temporarily increased and thereafter, decreased until day 60 in all soils. It is concluded that C and N mineralization in the biochar amended soils varied with the texture and native organic C status of the soils.     

Corn growth response to K fertilization on three compacted soils

A greenhouse study was conducted to evaluate the response of corn (Zea mays L.) to K fertilization on Kewaunee silty clay loam, Plainfield loamy sand, and Plano silt loam soils compacted to two bulk density levels. Treatments were established in a factorial combination of two soil bulk density levels, three soil K levels, with and without banded placement of K. Increasing soil bulk density did not affect the height growth of the corn on any soil, but did increase shoot dry matter weight on the Kewaunee soil. Root dry matter was reduced by increased soil bulk density on the Kewaunee soil. The shoot/ root ratio was greater at the higher bulk density on all soils. Increasing soil K increased the shoot dry matter content on all soils and increased root dry matter content on the Kewaunee and Plano soils. The banded K treatment did not affect height growth or dry matter accumulation. Shoot K concentration was reduced at the higher soil bulk density on the Kewaunee and Plano soils. Both methods of K application increased the K concentration of the shoots on all soils.     

Soil texture effect on nitrate leaching in soil percolates

Abstract

Nitrate nitrogen (NO₃‐N), which is an essential source of nitrogen (N) for plant growth, is now also considered a potential pollutant by the Environmental Protection Agency (EPA). This is because excess applied amounts of NO₃‐N can move into streams by run‐off and into ground water by leaching, thereby becoming an environmental hazard. Soils have varied retentive properties depending on their texture, organic matter content, and cation exchange capacity (CEC). The purpose of this study was to determine the effect of soil texture on NO₃‐N retention to reduce NO₃‐N contamination in the environment. A sand, 85:15 sand:peat Greensmix, a loamy sand, and sandy clay loam soils were placed in 2×3 inch metal cylinders and soaked in a 240 ppm solution of NO₃‐N for seven days to saturate the soil with NO₃ ions. The columns were leached with water to collect 10 soil percolate samples of 50 mL each until a total volume of 500 mL was collected. Nitrate‐N was measured in each 50‐mL aliquot by automated colorimetry. The results showed that soil texture affected the retention of N03‐N in the sand, which adsorbed the least amount of NO₃‐N at 119 ppm, followed by the Greensmix at 125 ppm, loamy sand at 149 ppm, and sandy clay loam at 173 ppm. More NO₃‐N was released in the first 50 mL of the sand percolate at 63% followed by the Greensmix, loamy sand, and sandy clay loam at 58,46, and 37% NO₃‐N released, respectively. Soils with more silt, clay, and organic matter retained more NO₃‐N than the straight sand. Therefore, a straight sand would be the poorest of soil types since NO₃‐N retention was low.