Green color protection of bamboo culms using one-step alkali pretreatment-free process

This study evaluated the protection effectiveness of alcohol-borne reagents for the green color of ma bamboo (Dendrocalamus latiflorus Munro) and moso bamboo (Phyllostachys pubescens Mazel). The results show that the types and concentrations of alcohol-borne reagents, the kinds of solvent, and the conditions of treatment greatly affected the green color of these two bamboo species. Without alkali pretreatment, an excellent green color protection (a* = −14.5) was obtained when the ma bamboo culms were treated with 0.5% methanol-borne copper chloride (CuCl₂) at 60°C for 30 min. Similar results were also obtained when ma bamboo culms were treated with 0.5% methanol-borne copper nitrate [Cu(NO₃)₂] at 60°C for 2 h (a* = −13.5). For moso bamboo, an attractive green color in the bamboo culms was achieved by treating the specimens with 1% methanol-borne copper acetate [Cu(CH₃COO)₂] at 60°C for 30 min. The a* value of treated specimens was −13.3. In addition, results demonstrated that ultrasonic treatment was more effective on green color protection than conventional water bath treatment. When moso bamboo was treated with 1% copper acetate at 60°C in an ultrasonic bath for only 15 min, a remarkable green color with an a* value of −13.6 was obtained on the bamboo epidermis.     

Effects of peeling and steam-heating treatment on basic properties of two types of bamboo culms (<Emphasis Type="Italic">Phyllostachys makinoi</Emphasis> and <Emphasis Type="Italic">Phyllostachys pubescens</Emphasis>)

Epidermal peeling (EPT) and steam-heating (SHT) treatments are two widely processing methods in bamboo industry. Moso bamboo (Phyllostachys pubescens Mazel) and makino bamboo (Phyllostachys makinoi Hayata) are important economical bamboo species in Taiwan and China. The subject of this study was to access the changes of chemical and mechanical properties in moso and makino bamboo culms, which were collected from Taiwan and China after EPT and SHT. As regard to chemical properties, the amounts of extractives and ash were increased both in moso and makino bamboos after EPT and SHT. In contrast, the contains of holocellulose and α-cellulose were decreased after EPT and SHT for two bamboos. Moso bamboo collected from China contained the lowest cellulose content but the highest amount of hemicellulose by SHT. The lignin contents of all samples were no significant different after SHT, and it might due to the structure of lignin did not destroy at 120 °C. For the mechanical properties, the density of all makino and moso bamboo samples was reduced after SHT; moreover, the decreasing trend of density was similar to the reducing of holocellulose, α-cellulose, hemicellulose, and equilibrium moisture content (EMC). All bamboo samples without EPT presented the highest modulus of elasticity (MOE) and modulus of rupture (MOR) whether SHT or not. Both MOE and MOR of all bamboo samples were decreased after SHT. The integrity of the bamboo skin is important for the dimensional stability of the bamboo, and the water absorption ability would be increased after EPT; however, SHT decreased the water absorption of bamboo.     

Investigation of changes in compressed moso bamboo (<Emphasis Type="Italic">Phyllostachys pubescens</Emphasis>) after hot-press molding

In this study, molding moso bamboo strips to a curved shape using hot-press molding operation was explored. Bamboo strips with different thickness and moisture content (MC) were subjected to press molding under 120–210 °C for different time. Changes in the chemical components of bamboo were analyzed by Fourier-transform infrared spectroscopy (FTIR). Effect of MC on thermal mechanical behavior of bamboo was investigated using dynamic mechanical analysis (DMA). Results showed that the influencing degree of four variables on compression and recovery ratios decreased as: temperature?>?time?>?thickness?>?MC. Compression ratio increased and recovery ratio decreased dramatically when pressing temperature exceeded 180 °C. FTIR analysis indicated that polysaccharide (especially hemicelluloses) underwent a progressive thermal degradation during compression at 180 and 210 °C for 40 min, whereas relative content of lignin increased. DMA results showed that bamboo samples with a higher MC had a lower storage modulus value, confirmed water had a plasticizing effect. The loss factor of bamboo with higher MC (12 and 16%) exhibited two major transitions centred around 100 °C (α₁) and 50 °C (α₂), respectively. The temperature of these α transitions kept almost unchanged as moisture level increased from 12 to 16%. These findings provide fundamental information for the future preparation of curved bamboo as profiled components in engineered products.     

Antibacterial activity of moso bamboo shoot skin (<Emphasis Type="Italic">Phyllostachys pubescens</Emphasis>) against <Emphasis Type="Italic">Staphylococcus aureus</Emphasis>

This study examined the antibacterial activity of moso bamboo shoot skin (Phyllostachys pubescens). Bamboo shoot skin itself and its dichloromethane extract had antibacterial activity against Staphylococcus aureus. Results suggest the possibility of effective utilization of antibacterial materials from bamboo shoot skins that are mainly discarded at present.     

Bioremediation of CCA-treated wood by brown-rot fungi <Emphasis Type="Italic">Fomitopsis palustris</Emphasis>, <Emphasis Type="Italic">Coniophora puteana</Emphasis>, and <Emphasis Type="Italic">Laetiporus sulphureus</Emphasis>

This study evaluated oxalic acid accumulation and bioremediation of chromated copper arsenate (CCA)-treated wood by three brown-rot fungi Fomitopsis palustris, Coniophora puteana, and Laetiporus sulphureus. The fungi were first cultivated in a fermentation broth to accumulate oxalic acid. Bioremediation of CCA-treated wood was then carried out by leaching of heavy metals with oxalic acid over a 10-day fermentation period. Higher amounts of oxalic acid were produced by F. palustris and L. sulphureus compared with C. puteana. After 10-day fermentation, oxalic acid accumulation reached 4.2 g/l and 3.2 g/l for these fungi, respectively. Fomitopsis palustris and L. sulphureus exposed to CCA-treated sawdust for 10 days showed a decrease in arsenic of 100% and 85%, respectively; however, C. puteana remediation removed only 18% arsenic from CCA-treated sawdust. Likewise, chromium removal in F. palustris and L. sulphureus remediation processes was higher than those for C. puteana. This was attributed to low oxalic acid accumulation. These results suggest that F. palustris and L. sulphureus remediation processes can remove inorganic metal compounds via oxalic acid production by increasing the acidity of the substrate and increasing the solubility of the metals.An erratum to this article can be found at     

Effect of priming on the germination of<Emphasis Type="Italic">Peltophorum dubium</Emphasis> seeds under water stress

Peltophorum dubium seeds provided by Anhembi, SP were scarified in 98% H2SO4 for 15 rain to overcome mechanical dormancy. Seeds were primed in solutions of 0.2% Captan at 10℃ and 27℃, PEG 6000 -1.0 MPa at 10℃ and 27℃, 0.5 mol KNO3, 0.75 Mol KNO3, 1.0 Mol KNO3. Eight treatments including the primed seeds and nonprimed seeds, five replicates with 100 seeds for each treatment, were set to 15-cm-Petri dish with double filter paper moistened with testing solution PEG in refrigerator at 27℃. For the experiments of all the groups, osmotic potential were 0.0, -0.2, -0.4, -0.6, -0.8, -1.0, -1.2, and -1.4 MPa. P. dubium seeds were also set to water stress experiment in rolled paper with PEG solutions from 0.0 to -1.0 MPa.Germination percentage decreased with the increase of PEG concentration. Control group had a better germination percentage than other groups. Germination hardly occurred in PEG -1.4 MPa.     

Insecticidal activity of thiamethoxam against the bamboo powder post beetle <Emphasis Type="Italic">Dinoderus minutus</Emphasis> Fabr. (Coleoptera: Bostrichidae)

Thiamethoxam (ACTARA^® 25WG) was evaluated for its insecticidal activities against the bamboo powder post beetle Dinoderus minutus Fabricius (Coleoptera: Bostrichidae). The study showed that thiamethoxam had contact toxicity against D. minutus. Based on dose-mortality responses, LC₅₀ values for thiamethoxam against D. minutus ranged from 1.74 to 7.94 μg ml^?1. Laboratory and field exposure tests showed that thiamethoxam at concentration of atleast 10 μg ml^?1 may have anti-oviposition or anti-feeding effects on D. minutus and can protect post harvest Bambusa vulgaris Schrad. culms against the infestation of this bamboo boring beetle.     

Micromorphological characteristics of bamboo (<Emphasis Type="Italic">Phyllostachys pubescens</Emphasis>) fibers degraded by a brown rot fungus (<Emphasis Type="Italic">Gloeophyllum trabeum</Emphasis>)

The decay pattern in bamboo fibers caused by a brown rot fungus, Gloeophyllum trabeum, was examined by microscopy. The inner part of the polylaminate secondary wall was degraded, while the outer part of the secondary wall remained essentially intact. Degradation in bamboo fiber walls without direct contact with the fungal hyphae was similar to wood decay caused by brown rot fungi. Degradation in polylaminate walls was almost confined to the broad layers whereas the narrow layers appeared resistant. The p-hydroxylphenyl unit lignin in middle lamella, particularly in the cell corner regions, was also degraded. The degradation of lignin in bamboo fibers was evidenced by Fourier transform infrared spectra. The present work suggests that the decay of bamboo fiber walls by G. trabeum was influenced by lignin distribution in the fiber walls as well as the polylaminate structures.     

Surface deterioration of moso bamboo (<Emphasis Type="Italic">Phyllostachys pubescens</Emphasis>) induced by exposure to artificial sunlight

The effect of ultraviolet-visible light irradiation on changes in surface chemistry and morphology of moso bamboo (Phyllostachys pubescens Mazel) was investigated. Fourier transform infrared (FT-IR) and FT-Raman spectroscopy were used in combination to study chemical changes induced by exposure to artificial sunlight (xenon lamp) for up to 160 h, and the resulting physical changes of cell walls of bamboo surfaces were examined by scanning electron microscopy (SEM). FT-IR results showed that significant changes occurred in the lignin component as indicated by considerable decreases in the intensities of the characteristic aromatic lignin peak at 1512 cm⁻¹ and other associated bands. This was accompanied by formation of new carbonyl groups at 1735 cm⁻¹, resulting in photooxidation of bamboo surfaces. The photosensitive nature of bamboo lignin was also demonstrated by FT-Raman analysis, in which obvious decreases in intensities of Raman bands at 1604 and 1630 cm⁻¹ mainly derived from lignin and free and esterified p-coumaric and ferulic acids were observed. SEM micrographs of the irradiated cross sections of bamboo revealed that significant damage occurred to the fiber walls, whereas the parenchyma cells exhibited slight distortion and some cracks occurred in the cell walls. The structures of cell corners and middle lamellae were nearly intact after irradiation.     

Derivation of two-way volume equation for bamboo, <Emphasis Type="Italic">Phyllostachys pubescens</Emphasis>

We derive a two-way volume equation for estimating the apparent culm volume of one of the largest bamboo species, Phyllostachys pubescens Mazel ex Houz. The volume equation was derived from the assumptions that (1) the relative culm form can be expressed by Kunze’s equation and (2) normal form-factors at two different relative heights are steady at constants independent of culm sizes. A total number of 200 sample culms were collected from a stand of P. pubescens in Mt. Toshima, Kumamoto Prefecture, western Japan, and were randomly bisected into two sets of data, i.e. modeling and test data. For the modeling data, normal form-factors at 0.6 and 0.9 in relative height were steady at 0.908 and 0.448, respectively. The coefficients of the volume equation were determined based on these steady values of the normal form-factors. For the test data, the apparent culm volume was estimated from diameter at breast height and culm height with the determined volume equation. The mean error and root mean square error of the estimated culm volume were, respectively, 8.120 × 10⁻⁵ and 3.291 × 10⁻³ m³, and there was no significant difference between estimated and actual volume. In conclusion, the two-way volume equation presented here appears to be convenient for predicting the apparent culm volume for P. pubescens.     

冷湿层积法对印度冷杉(Abies pindrow)和长叶云杉(Picea smithiana）种子萌发的影响

研究赤霉素(GA3),冷湿和温度 对五个种源的印度冷杉(Abies pindrow)和长叶云杉(Picea smithiana)种子萌发的影响.种子被浸泡在GA3 (10 mg(L-1)中24小时,然后在3(5(C温度的条件下冷藏15天.设计4个温度(10(C, 15(C, 20(C 和 25(C)条件来促进种子的萌发.结果表明,浸泡和冷湿处理明显增加种子的萌发率.在10 (C时种子的萌发率最高.总体结果表明,种子被浸泡在GA3 (10 mg(L-1)中24小时,冷湿藏15天,可以有效地促进印度冷杉和长叶云杉的种子萌发.统计数据表明,浸泡处理、温度和种源以及与温度的相互作用都对种子的萌发有明显的影响.     

At5g54160 gene encodes <Emphasis Type="Italic">Arabidopsis thaliana</Emphasis> 5-hydroxyconiferaldehyde <Emphasis Type="Italic">O</Emphasis>-methyltransferase

The function of an Arabidopsis thaliana gene, At5g54160 annotated as a caffeic acid O-methyltransferase CAOMT gene was characterized. The recombinant enzyme of this gene (AtOMT1) catalyzed the O-methylation of phenylpropanoid and flavonoid substrates. The specificity constants (k _cat/K _m) for 5-hydroxyconiferaldehyde (5-HCAld) and quercetin were both 0.11 μM⁻¹·min⁻¹. On the other hand, lignins of At5g54160-knockout Arabidopsis mutants lacked syringyl units. In addition, we showed that the gene silencing also resulted in significant accumulation of caffeyl alcohol (CaAlc). These results strongly suggested that At5g54160 gene is involved in syringyl lignin synthesis for the methylation of both 5-hydroxyconiferaldehyde and 3,4-dihydroxyphenyl compound(s). Part of this work was presented at the Annual Meeting of Japan Society for Bioscience, Biotechnology, and Agrochemistry, March 24–27, 2007     

Micropropagation and callus culture of <Emphasis Type="Italic">Saussurea laniceps</Emphasis>, an alpine medicinal plant

Cottonhead windhairdaisy (Saussurea laniceps Hand.-Mazz.) is one of the most famous and important medicinal herbs in China. Illegal collection from wild populations is increasingly threatening the present environment of S. laniceps. Establishment of an efficient method for micropropagation is the best way to change its endangered situation. When mature seeds of S. laniceps were cultured on hormone-free MS medium, plantlets were formed from germinated seeds in 7–10 d. Then 0.5 cm × 0.5 cm leaf explants were transplanted to MS medium supplemented with 1-naphthalene-acetic acid (NAA)/2,4-D and benzyladenine (BA)/KT and callus was achieved 10 d after transfer. Shoot bud regeneration occurred from callus cultured on MS medium supplemented with different growth regulators 20 d after culturing. The regeneration percentages varied with the different components of plant growth regulators. The percent regeneration from callus pretreated at low temperature of 5°C increased significantly compared with those incubated at 23/20°C directly. Optimal regeneration was observed with explants on media supplemented with 1.5 mg&#8226;L^–1 BA plus 0.2 mg&#8226;L^-1 NAA. In the presence of 0.2 mg&#8226;L^–1 NAA in half-strength MS, 78% of the shoots formed roots. Plantlets from explants showed 63% survival after acclimatization.     

Lignification in developing culms of bamboo <Emphasis Type="Italic">Sinobambusa tootsik</Emphasis>

Bamboos are among the largest woody grasses and grow very rapidly. Although lignin is a crucial factor for the utilization of bamboo biomass, the lignification mechanism of bamboo shoots is poorly understood. We studied lignification in the bamboo Sinobambusa tootsik during culm development. Elongation growth began in May and ended in late-June, when the lignin content was approximately half that in mature culms. Thioacidolysis analysis indicated that p-hydroxyphenyl units in lignin formed even at late stages of lignification. The syringyl/guaiacyl ratio varied during culm development. Various lignin precursors were detected in developing culms by liquid chromatography–mass spectrometry. The ferulic acid content decreased from May to June, indicating that ferulic acid was utilized in early stages of cell wall formation. Monolignol glucosides were detected at early stages of lignification, whereas the contents of monolignols, coniferaldehyde, sinapaldehyde, p-coumaric acid, and ferulic acid peaked at later stages of lignification. Therefore, lignin precursors may be supplied differentially during the lignification process. In August, the rate of lignification decreased, although the contents of various lignin precursors peaked, implying that the rate-limiting step in the cessation of lignification in bamboo is transport or polymerization of lignin precursors, rather than their biosynthesis.     

<Emphasis Type="Italic">Bursaphelenchus mucronatus</Emphasis> (Nematoda: Aphelenchoididae) vectored by <Emphasis Type="Italic">Monochamus </Emphasis><Emphasis Type="Italic">urussovi</Emphasis> (Coleoptera: Cerambycidae) in Hokkaido,Japan

Bursaphelenchus mucronatus Mamiya et Enda has been recovered for the first time from adults of the cerambycid beetle, Monochamus urussovi (Fischer), in Hokkaido, Japan. The nematode was also recovered from the inner bark of Picea jezoensis (Siebold et Zuccarini) Carrière and Abies sachalinensis (Fr Schmidt) Masters infested with M. urussovi larvae. PCR–RFLP analysis indicated that B. mucronatus in Hokkaido is the European type.     

Aphidicidal activity of some indigenous plant extracts against bean aphid <Emphasis Type="Italic">Aphis </Emphasis><Emphasis Type="Italic">craccivora</Emphasis> Koch (Homoptera: Aphididae)

Aphidicidal activity of hot and cold water extracts of some indigenous plants, Azadirachta indica A. Juss (neem), Calotropis procera (Aiton) W.T. Aiton (akanda), Polygonum hydropiper L. (biskatali) and Ipomoea sepiaria J. Koenig ex Roxb. (bankalmi), were tested against the bean aphid, Aphis craccivora Koch. Hot water extract of P. hydropiper and A. indica was found to be the most effective (87.6–94.5 and 80.47–89.6% mortality respectively, P < 0.01) among all the extracts. Other hot and cold water extracts also appeared to be useful (59.5–87.5% mortality) as pesticides for A. craccivora. The highest yield (3.25 kg per plant) was obtained using hot water extract of P. hydropiper followed by hot water extract of A. indica (3.15 kg per plant). The lowest yield (0.32 kg per plant) was recorded from the control block. All the phytoproduct treatments had significantly (P < 0.01) better yield than the control block.     

Green-color conservation of ma bamboo (Dendrocalamus latiflorus) treated with chromium-based reagents

The objectives of this study were to search for appropriate chemical reagents without arsenic to use as green-color protectors for ma bamboo (Dendrocalamus latiflorus Munro) culms and to compare the effectiveness of these reagents for green-color conservation. Bamboo culms treated with chromated copper phosphate (CCP) or chromated phosphate (CP), which were developed by us, exhibit a greener color than those treated with Boliden K-33 (type B chromated copper arsenate).The experimental results revealed that among the chemicals employed, CrO₃ and H₃PO₄ were key components in conserving the green color of bamboo epidermis, and their ratio definitely affected the effectiveness of green-color conservation. When the CrO₃/H₃PO₄ ratio was 11, the treated bamboo culms displayed the greenest color. Among all the bamboo culms treated with different formulations of inorganic salts, the one treated with CP (1% CrO₃, 1% H₃PO₄) had the best green-color conservation, enhanced by increasing the duration of treatment.     

Effect of seed coverings and seed pretreatments on the germination response of <Emphasis Type="Italic">Alnus glutinosa</Emphasis> and <Emphasis Type="Italic">Betula pubescens</Emphasis> seeds

The germination of common alder (Alnus glutinosa (L.) Gaertn.) and downey birch (Betula pubescens Ehrh.) seeds is often poor in bare-root nurseries. The effect of a variety of seed coverings and a few seed pretreatments on seedling emergence was examined in this study in an attempt to address this problem. Seeds of each species were sown in trays containing nursery soil, covered with grit, gravel, sand, combinations of these coverings, a hydromulch or a sealed plastic cloche and then incubated for 6 weeks at 17–20°C. The grit combined with sand or gravel, the hydromulch and the cloche increased seedling emergence when compared with the standard grit. In another experiment, seeds of each species were fully imbibed (FI) (>50% moisture content, MC), as per standard practice, or adjusted to target MC (TMC) (30–35% MC) levels, and then chilled to release dormancy. Some seeds of each MC treatment were primed at 20°C for 2 days following chilling, after which all seeds were evaluated in laboratory tests and a nursery trial. Germination potential of the FI seeds declined in the lab tests by the second test date, which was reflected in low seedling emergence in the nursery in birch. The primed FI seeds of alder germinated most rapidly in the nursery, but other effects were not significant. Seedling emergence was better in the nursery in response to the TMC than the FI pretreatment in birch.

Laboratory and field evaluation of <Emphasis Type="Italic">Beauveria bassiana</Emphasis> for controlling Mulberry whitefly <Emphasis Type="Italic">Pealius mori</Emphasis> Takahashi (Homoptera: Aleyrodidae) in mulberry (<Emphasis Type="Italic">Morus alba</Emphasis> Linn)

In a laboratory screening of 12 isolates of entomopathogenic fungi against nymphs of the mulberry whitefly (Pealius mori Takahashi), Beauveria bassiana (Balsamo-Crivelli) Vuillemin CKB-048 was the most virulent, causing 87 ± 3% mortality at 1 × 10⁶ conidia/ml. Infection was confirmed by growth of the fungus from cadavers and by scanning electron microscopy of treated nymphs. Beauveria bassiana CKB-048 was formulated as a wettable powder (1 × 10⁹ conidia/g) and tested in two mulberry (Morus alba Linn) plantations in central and northeastern Thailand. In both locations, two spray applications of B. bassiana CKB-048 at 3.75 × 10¹² to 6.25 × 10¹² conidia/ha and at 14 day intervals provided good control of whitefly nymphs; control with B. bassiana CKB-048 was comparable to that with the pesticide buprofezin at 250 g of active ingredient/ha. In addition, no mortality of silkworm larvae occurred when the larvae were fed with mulberry leaves sprayed with B. bassiana CKB-048 7, 14, or 21 days earlier.