Effects of Nitrogen Fertilizer on Protein Quantity and Gluten Strength Parameters in Durum Wheat (Triticum turgidum L. var. durum) Cultivars of Variable Gluten Strength

Field studies were conducted over three years at two locations in Saskatchewan, Canada, to determine the effect of nitrogen fertilizer on protein quantity and protein strength in 10 cultivars of durum wheat (Triticum turgidum L. var. durum) representing a range of gluten strength. Increasing nitrogen fertilizer resulted in increased protein content in all cultivars across environments. Cultivars were clearly differentiated on the basis of gluten strength using a gluten index (GI), SDS sedimentation (SDSS), alveograph indices of overpressure (P) and deformation energy (W), mixograph energy to peak (ETP), and mixograph bandwidth energy (BWE) at all fertilizer levels. Variable cultivar response to nitrogen fertilizer was observed only for protein content, GI, and alveograph W. The nature of the cultivar‐by‐fertilizer interaction for GI suggested that the conventional strength cultivars would benefit more from nitrogen fertilizer than the extra‐strong types, which showed no change or slight decreases in GI with nitrogen fertilizer despite an increase in total gluten. SDSS increased with nitrogen fertilizer, following similar trends as protein. Gluten strength rankings of the cultivars by SDSS were maintained with increased fertilizer. Fertilizer had little effect on alveograph P, mixograph ETP, and mixograph BWE. Overall, GI values were more stable across increasing levels of nitrogen fertilizer and resultant increased protein content compared with SDSS, mixograph development time, and alveograph W and L, suggesting it is a good test for estimating intrinsic gluten strength for cultivars with a wide range of protein content.     

Rheological Properties of White Salted Noodles with Different Amylose Content at Small and Large Deformation

The rheological properties of cooked white salted noodles made from eight wheat cultivars with varied amylose content were analyzed at small and large deformation. Their dynamic shear viscoelasticity was measured using a rheometer with parallel plate geometry. Compressive force and creep‐recovery curves were measured using various probes and sample shapes. Noodles with lower amylose content showed a lower storage shear modulus (G′) and a higher frequency dependence of G′. The G′ values of noodles were highly correlated with amylose content in wheat flour and with G′ values of 30 and 40% starch gels. Remarkable differences in the characteristics of creep‐recovery curves were observed between cultivars. The difference in amylose content in wheat flour reflected the creep‐recovery properties of noodles. A negative correlation was demonstrated between amylose content and both maximum creep and recovery compliance. The compressive force required for 20, 50, 80, and 95% strains was compared. At 20 and 50% strain, noodles made from lower amylose wheat flour showed lower compressive force. Noodles of waxy wheat had a higher compressive force than nonwaxy noodles when the strain was >80%, indicating the waxy wheat noodles are soft but difficult to completely cut through.     

Rheological Properties of Vital Wheat Gluten Suspensions

Flour and doughs represent rheologically complex materials whose properties are dependent on many factors including processing conditions. To avoid some of the problems associated with the rheological characterization of dough, we have initiated a study focused on the rheological properties of one of the major components of dough, vital wheat gluten. Suspensions of vital wheat gluten were prepared with concentrations of 225–325 mg/mL.The moduli of the gluten suspensions was 0.2 Pa at 225 mg/mL to 37 Pa at 325 mg/mL. At <250 mg/mL, the gluten suspensions exhibited fluidlike behavior. The crossover frequency, (G′[ω] = G″[ω]) shifted slightly from 0.5 rad/sec at 225 mg/mL to 0.9 rad/sec at 250 mg/mL. At >300 mg/mL, the gluten suspensions exhibited solidlike behavior. The crossover frequencies were independent of concentration and equal to 100 rad/sec. At <250 mg/mL, the high‐frequency behavior of moduli were proportional to ω^3/4, as expected for a semiflexible coil. At >300 mg/mL, the high‐frequency behavior of moduli were proportional to ω^1/2, indicating a flexible coil. These results suggest vital wheat gluten suspensions undergo a structural change between 250 and 300 mg/mL.     

Association of Glutenin Subunit Composition and Dough Rheological Characteristics with Cookie Baking Properties of Soft Wheat Cultivars

The effect of flour type and dough rheology on cookie development during baking was investigated using seven different soft winter wheat cultivars. Electrophoresis was used to determine the hydrolyzing effects of a commercial protease enzyme on gluten protein and to evaluate the relationships between protein composition and baking characteristics. The SDS‐PAGE technique differentiated flour cultivars based on the glutenin subunits pattern. Electrophoresis result showed that the protease degraded the glutenin subunits of flour gluten. Extensional viscosities of cookie dough at all three crosshead speeds were able to discriminate flour cultivar and correlated strongly and negatively to baking performance (P < 0.0001). The cookie doughs exhibited extensional strain hardening behavior and those values significantly correlated to baking characteristics. Of all rheological measurements calculated, dough consistency index exhibited the strongest correlation coefficient with baking parameters. The degradation effects of the protease enzyme resulted in more pronounced improvements on baking characteristics compared with dough rheological properties. Stepwise multiple regression showed that the dough consistency index, the presence or absence of the fourth (44 kDa) subunit in LMW‐GS and the fifth subunit (71 kDa) subunit in HMW‐GS were predominant parameters in predicting cookie baking properties.     

Effect of Oxidation on the Dynamic Rheological Properties of Wheat Flour-Water Doughs

Oxidation increased the strength of the dough. Addition of ascorbic acid or azodicabonamide (ADA) to dough increased both elastic modulus (G′) and viscous modulus (G″), while addition of cysteine decreased both values. Hydrogen peroxide, from either calcium peroxide or glucose oxidase, increased G′ and G″ and decreased tan δ (G″/G′) values. In addition to strengthening the dough, hydrogen peroxide dried the dough, but ADA did not. The absorption of doughs containing 20 GU of glucose oxidase (source of hydrogen peroxide) could be increased by ≈5% without altering the rheological properties. Presumably, the mobility of water in the gel formed by oxidative gelation decreased, thereby causing a drying of the dough.     

Effect of Mixing Time on Gluten Recovered by Ultracentrifugation Studied by Microscopy and Rheological Measurements

The effect of mixing time on gluten formation was studied for four commercial flour mixtures. The gluten phase was separated from dough using a nondestructive ultracentrifugation method. Small deformation dynamic rheological measurements and light and scanning electron microscopy were used. The recovered gluten was relatively pure with a small amount of starch granules embedded. The protein matrix observed by microscopy became smoother with prolonged mixing. No effect of overmixing was observed on the storage modulus (G′) of gluten for any of the flours. The amount of water in gluten increased from optimum to over‐mixing for most of the flours. Increased water content during prolonged mixing was not related to an effect on G′. The Standard flour resulted in the highest water content of gluten, which increased considerably with mixing time. The Strong flour had the lowest G′ of dough, a high G′ of gluten, and no increase in gluten water content from optimum to over‐mixing. The Durum flour did not show gluten development and breakdown similar to the other flours. The differences in gluten protein network formation during dough mixing are genetically determined and depend on the flour type.     

Rheological Properties of Wheat Flour Dough and the Relationship with Bread Volume. I. Creep‐Recovery Measurements

The rheological properties of 17 pure European wheat cultivars were analyzed and evaluated in relation to the bread volume. Rheological testing included two empirical rheological methods, farinograph and alveograph, and more fundamental creep‐recovery experiments at shear stresses of 100 and 250 Pa. Principal component analysis on the farinograph and alveograph results showed that a wide range of rheological properties was present among the wheat cultivars. Correlation analysis pointed out that creep‐recovery parameters showed significant correlations with protein content, Zeleny sedimentation value, farinograph water absorption, alveograph extensibility, and bread volume. Among the rheological parameters, maximum recovery strain at a shear stress of 250 Pa showed the highest significant correlation with the bread volume (r = 0.790**). Variables were combined to predict the bread volume by multiple linear regression. A combination of protein content, farinograph water absorption, and alveograph P/L showed the best prediction (r² = 0.80). When taking into account the creep‐recovery parameters, the best prediction of the bread volume (r² = 0.74) was obtained for a combination of the maximum recovery strain at a shear stress of 250 Pa with one other quality parameter (Zeleny sedimentation value, farinograph water absorption, or alveograph W).     

Breadmaking Quality of Selected Durum Wheat Genotypes and Its Relationship with High Molecular Weight Glutenin Subunits Allelic Variation and Gluten Protein Polymeric Composition

Twenty‐seven durum wheat genotypes originating from different geographical areas, all expressing LMW‐2 at Glu‐B3, and five bread wheats were evaluated for flour mixing properties, dough physical characteristics, and baking performance. Gluten polymeric composition was studied using size‐exclusion HPLC of unreduced flour protein extracts. As a group, durum wheats had poorer baking quality than bread wheats in spite of higher protein and total polymer concentrations. Durum wheats exhibited weaker gluten characteristics, which could generally be attributed to a reduced proportion of SDS‐unextractable polymer, and produced less extensible doughs than did bread wheats. However, substantial variation in breadmaking quality attributes was observed among durum genotypes. Better baking performance was generally associated with greater dough extensibility and protein content, but not with gluten strength related parameters. Extensibility did not correlate with gluten strength or SEHPLC parameters. Genotypes expressing high molecular weight glutenin subunits (HMW‐GS) 6+8 exhibited better overall breadmaking quality compared with those expressing HMW‐GS 7+8 or 20. Whereas differences between genotypes expressing HMW‐GS 6+8 and those carrying HMW‐GS 7+8 could only be attributed to variations in extensibility, the generally inferior baking performance of the HMW‐GS 20 group relative to the HMW‐GS 6+8 group could be attributed to both weaker and less extensible gluten characteristics.     

Effects of Prolonged Storage at Freezing Temperatures on Starch and Baking Quality of Frozen Doughs

The effects of prolonged frozen storage on the starch, rheological, and baking properties of doughs were investigated. Four hard red spring (HRS) wheat cultivars exhibiting consistently different gluten characteristics were used. Gelatinization properties of starches isolated from fresh and thawed frozen doughs over 16 weeks of frozen storage were examined using differential scanning calorimetry (DSC). Significance of results varied with cultivar, but all cultivars showed a significant increase in ΔH with increased frozen storage time, indicating water migration and ice crystallization. The amount of freezable water in frozen doughs increased for all cultivars with frozen storage, but the rate of increase varied. Glupro showed a consistent increase in freezable water during frozen storage (41.6%), which may be associated with its high protein content and strong gluten characteristics. Rheological strength of the frozen doughs which was determined by decreases in extensigraph resistance and storage modulus (G′), declined throughout frozen dough storage. Proofing time increased from 45 min for fresh doughs to an average of 342 min for frozen doughs stored 16 weeks. Concomitantly, loaf volumes decreased from an average of 912 cm³ for fresh doughs to an average of 738 cm³ for the frozen doughs. Longer proof times and greater loaf volume loss were obtained for the cultivars exhibiting greater gluten strength characteristics.     

Effects of Different Salts on Mixing and Extension Parameters on a Diverse Group of Wheat Cultivars Using 2‐g Mixograph and Extensigraph Methods

Cations of differing chaotropic capacities (LiCl, NaCl, and KCl) were used in small‐scale mixing and extensigraph studies to assess functional changes in dough behavior of wheat cultivars varying in total protein content and HMW glutenin composition. Salt addition, regardless of cationic type, caused an increase in dough strength and stability. The smaller (hydrated) and least chaotrophic cations (Li⁺<Na⁺<K⁺) effected the greatest increase in mixing time (MT) and resistance to extension (R_max) and produced the most stable resistance breakdown (RBD). The effects of different cations on mixing and extensions indicated strong intercultivar variation; differential responses to salt addition were further shown when the cultivars were grouped according to protein content and Glu‐1D or Glu‐1B genome composition. Increases in dough strength parameters due to the addition of salt were consistently more significant for cultivars showing an overexpression of Bx7 (>12% protein). In the absence of genotypic variation, a significant interactive effect of cultivar type, protein amount, and salt addition was found for all functional dough parameters except extensibility. During mixing, there was a decrease in the amount of apparent unextractable polymeric protein (%UPP) in the dough. This phenomenon was ameliorated by the presence of salt in doughs formed from weaker flours and was most pronounced early on in the mixing process (t = 100–200 sec). Results show the importance of refining 2‐g mixograph studies to include salt in the “flour and water” dough formula.     

Effect of Flour Extraction Rate on White and Red Winter Wheat Flour Compositions and Tortilla Texture

Wheat flours commercially produced at 74, 80, and 100% extraction rates made from hard white winter wheat (WWF) and hard red winter wheat (WRF) were used to produce tortillas at a commercial-scale level. Flour characteristics for moisture, dry gluten, protein, ash, sedimentation volume, falling number, starch damage, and particle-size distribution were obtained. Farinograms and alveograms were also obtained for flour-water dough. A typical northern Mexican formula was used in the laboratory to test the tortilla-making properties of the flours. Then commercial-scale tortilla-baking trials were run on each flour. The baked tortillas were stored at room and refrigeration temperatures for 0, 1, 2, and 3 days. Maximum stress and rollability were measured every day. Tortilla moisture, color, diameter, weight, and thickness were measured for each treatment. Finally, tortilla acceptability was tested by an untrained sensory panel. Analyses of variance (ANOVA) were performed on the data. WWF had higher protein content, dry gluten, sedimentation volume, and water absorption than the WRF. The WWF was the strongest flour based on farinograph development time and alveograph deformation work. It also produced the most extensible dough measured with the alveograph (P/L). Flour protein and ash contents, water absorption, and tenacity increased directly with the flour extraction rate. Both WWF and WRF performed well in commercial-scale baking trials of tortillas. Tortillas made with both types of flours at 74 and 80% extraction rates had the best firmness and rollability. However, tortillas made with WWF 80% had the best color (highest L value). Tortillas prepared with 100% extraction rate flour were also well accepted by the sensory panel, had good textural characteristics, and became only slightly firm and slightly less rollable after three days of storage at room temperature.     

Relationship Between Rheological Properties and Microstructural Characteristics of Nondeveloped,Partially Developed,and Developed Doughs

Farinography and mixography are two commonly used procedures for evaluating dough properties. These procedures, however, cannot separate hydration and energy input during dough development, both of which are critically important for understanding fundamental rheological properties of dough. A rheometer and laser scanning confocal microscopy (LSCM) were used to study the relationship between rheological properties and microstructural characteristics of developed (by farinograph with both shear and extensional deformations), of partially developed (by rheometer with either shear or extensional deformation), and of nondeveloped (no deformation) dough samples of wheat flours. Rheological data revealed that developed dough had the highest G* (most elastic or strong), followed by doughs partially developed with extensional deformation, and then shear deformation, and finally by nondeveloped dough. The LSCM z‐sectioning (scanning of different layers of the sample) and the analysis of amount of protein matrix showed that developed dough had the most protein matrix and nondeveloped dough had the least protein matrix. It also showed that the higher the G*, the greater the protein network. Moreover, the type of deformation appeared to contribute to the development of protein matrix and further increase the dough strength. In this study, a combination of shear and extensional deformations by farinograph produced the most protein matrix and the strongest dough, followed by extensional deformation, shear deformation, and then no deformation.     

Modified Dough Preparation for Alveograph Analysis with Limited Flour Sample Size

Dough rheological characteristics obtained by alveograph testing, such as extensibility and resistance to extension, are important traits for determination of wheat and flour quality. A challenging issue that faces wheat breeding programs and some wheat research projects is the relatively large flour sample size of 250 g required for the standard alveograph method (AACCI Approved Method 54‐30.02). A modified dough preparation procedure for a small flour sample size was developed for the alveograph test method. A dough was prepared by mixing 80 g of flour with 60% water absorption (2.5% salt solution) for 4 min in a 100 g pin mixer; it was then sheeted and cut into three patties of defined thickness. Data generated by the modified dough preparation method were significantly correlated with the results from the approved alveograph method. The correlation coefficients (r) for each of six alveograph dough characteristics of 40 different advanced breeding lines and wheat varieties were 0.92 for P (mm H₂O), 0.73 for L (mm), 0.83 for W (10^–4 J), 0.90 for P/L, 0.90 for le (%), and 0.76 for G. The modified dough preparation was easier and more convenient than the approved method, and test time for the modified dough preparation was shorter by 20–25 min. This modified dough preparation procedure for the alveograph may be useful for wheat breeding programs as well as an alternative to the approved alveograph method for milling and baking industries and wheat quality research.     

Pan Bread and Chinese White Salted Noodle Qualities of Chinese Winter Wheat Cultivars and Their Relationship with Gluten Protein Fractions

Improvement of food processing quality has become a major breeding objective in China. Nineteen Chinese leading winter wheat cultivars with improved quality and two Australian cultivars with high bread and noodle-making qualities were sown in four locations for two years to investigate dough properties, pan bread, and Chinese white salted noodle (CWSN) qualities, and their association with the quantity of protein fractions. The results indicated that genotype, environment, and genotype-by-environment interaction significantly affected most of quality traits and amount of protein fractions. Genotype mainly determined the quantity of gluten protein fractions and pan bread quality parameters, while environment was the most important source of variation for the noodle quality parameters. Chinese cultivars were characterized by acceptable protein content (11.1–13.4%), medium to strong dough strength (maximum resistance 176.9–746.5 BU), medium to poor dough extensibility (166.5–216.4 mm), fair to very good pan bread qualities, and good to very good CWSN qualities. Gliadin contributed more in quantity to protein content (r = 0.80, P < 0.001), however, glutenin and its subgroups were more important to dough strength. The quantity of glutenin, HMW-GS, and LMW-GS were highly and significantly correlated with dough strength-related traits such as farinograph development time, stability, extensigraph maximum resistance, and extension area (r = 0.70–0.91, 0.65–0.89, and 0.70–0.91, respectively; P < 0.001). The quantity of LMW-GS could explain 82.8% of the total variation of dough maximum resistance. The quantity of gliadin and the ratio of HMW-GS to LMW-GS determined dough extensibility (r = 0.75 and r = –0.59, respectively; P < 0.001 and P < 0.01, respectively). Higher quantity of glutenin and lower ratio of gliadin to glutenin resulted in higher bread score with r = 0.70 (P < 0.001) and r = –0.74 (P < 0.001), respectively. However, protein content and its fractions have a moderate undesirable effect on CWSN parameters such as color, firmness, and taste. Therefore, both allelic variation and quantity of storage protein fractions should be considered in breeding cultivars with improved pan bread making quality.     

Role of Gluten and Its Components in Determining Durum Semolina Dough Viscoelastic Properties

Gluten was isolated from three durum wheat cultivars with a range in strength. Gluten was further fractionated to yield gliadin, glutenin and high molecular weight (HMW) and low molecular weight (LMW) glutenin subunits (GS). The gluten and various fractions were used to enrich a base semolina. Enriched dough samples were prepared at a fixed protein content using a 2‐g micromixograph. Mixing strength increased with addition of gluten. Dynamic and creep compliance responses of doughs enriched with added gluten ranked in order according to the strength of the gluten source. Gliadin addition to dough resulted in weaker mixing curves. Gliadin was unable to form a network structure, having essentially no effect on dough compliance, but it did demonstrate its contribution to the viscous nature of dough (increased tan δ). Source of the gliadin made no difference in response of moduli or compliance. Addition of glutenin to the base semolina increased the overall dough strength properties. Glutenin source did influence both dynamic and compliance results, indicating there were qualitative differences in glutenin among the three cultivars. Enrichment with both HMW‐GS and LMW‐GS increased overall dough strength. Source of HMW‐GS did not affect compliance results; source of LMW‐GS, however, did have an effect. The LMW‐2 proteins strengthened dough to a greater extent than did LMW‐1. Mechanisms responsible for dough viscoelastic properties are described in terms of reversible physical cross‐links.     

Contribution of Hydrophobic Soluble Gluten Proteins,Fractionated by Hydrophobic Interaction Chromatography in Highly Acetylated Agarose,to Dough Rheological Properties

Hydrophobic interaction chromatography with highly acetylated agarose in 1‐mL columns was used to fractionate gliadins and acid‐soluble glutenins. Proteins were eluted in two fractions, the first with acetate buffer (pH 3.6) containing 35% propanol, and the second with Tris buffer in 8M urea. The proportion of eluted protein in the second fraction was called the surface hydrophobicity index. The study included 20 wheat samples of different baking qualities. Multiple regression analysis using the general linear model combined with the stepwise technique was used to relate the surface hydrophobicity index of soluble gluten proteins to specific dough rheological characteristics. Surface hydrophobicity index of gliadins and acetic acid soluble glutenins explained part of the variability of swelling index, extensibility, and work of deformation (dough strength) measured with the alveograph, and part of the farinograph water absorption variability, but showed no relationship to dough mixing characteristics. Hydrophobic soluble gluten proteins fractionated by hydrophobic interaction chromatography (HIC) explained a part of the variability of dough rheological properties.     

Effects of Transglutaminase on Rheology,Microstructure, and Baking Properties of Frozen Dough

The improving effects of transglutaminase (TGase) were investigated on the frozen dough system and its breadmaking quality. Rheological properties and microstructure of fresh and frozen doughs were measured using a Rapid Visco‐Analyser (RVA), dynamic rheometer, and scanning electron microscopy (SEM). The frozen doughs with three storage periods (1, 3, and 5 weeks at –18°C) were studied at three levels (0.5, 1.0, and 1.5%) of TGase. As the amount of TGase increased, hot pasting peak viscosity and final viscosity from the RVA decreased, but breakdown value increased. The TGase content showed a positive correlation with both storage modulus G′ (elastic modulus) and the loss modulus G″ (viscous modulus): G′ was higher than G″ at any given frequency. The SEM micrographs showed that TGase strengthened the gluten network of fresh, unfrozen dough. After five weeks of frozen storage at –18°C, the gluten structure in the control dough appeared less continuous, more disrupted, and separated from the starch granules, while the dough containing 0.5% TGase showed less fractured gluten network. Addition of TGase increased specific volume of bread significantly (P < 0.05) with softer bread texture. Even after the five weeks of frozen storage, bread volume from dough with 1.5% TGase was similar to that of the fresh control bread (P < 0.05). The improving effects of TGase on frozen dough were likely the result of the ability of TGase to polymerize proteins to stabilize the gluten structure embedded by starch granules in frozen doughs.     

Effects of Wheat Cultivar and Nitrogen Application on Storage Protein Composition and Breadmaking Quality

Influences of cultivar and nitrogen application on protein concentration and composition, and amount and size‐distribution of different protein components, were investigated in 10 spring wheat cultivars (Triticum aestivum L.) with widely varying gluten strength, grown under four nitrogen fertilizer conditions. The results showed that cultivar differences in gluten strength were determined by storage protein composition, differences in total amount of HMW glutenin subunits, the glutenin‐to‐gliadin ratio, and the relationship between SDS‐soluble and SDS‐insoluble protein polymers. Negative correlations were found between protein parameters related to gluten strength and bread volume. No cultivar stability for gluten strength in relation to differences in nitrogen application was found. Thus, the gluten strength was influenced by the nitrogen application in all the investigated cultivars. Increased nitrogen supply correlated significantly to an increase in all protein components containing gliadins and glutenins, but not to those containing albumins and globulins. The increase in protein components containing gliadins and glutenins correlated significantly with an increase in protein concentration and bread volume.     

Application of Response Surface Methodology in the Development of Gluten‐Free Bread

The formulation of gluten‐free (GF) bread of high quality presents a formidable challenge as it is the gluten fraction of flour that is responsible for an extensible dough with good gas‐holding properties and baked bread with good crumb structure. As the use of wheat starch in GF formulations remains a controversial issue, naturally GF ingredients were utilized in this study. Response surface methodology was used to optimize a GF bread formulation primarily based on rice flour, potato starch, and skim milk powder. Hydroxypropylmethylcellulose (HPMC) and water were the predictor variables. Analyses of the treatments from the design were made 24 hr after baking. Specific volume and loaf height increased as water addition increased (P < 0.01). Crumb firmness decreased as water levels increased (P < 0.01). Significant interactions (P < 0.01) between HPMC and water were found for the number of cells/cm². The number of large cells (>4 mm²) decreased with increasing levels of HPMC and water. Optimal ingredient levels were determined from the data obtained. The optimized formulation contained 2.2% HPMC and 79% water flour/starch base (fsb) and measured responses compared favorably to predicted values. Shelf‐life analysis of the optimized formulation over seven days revealed that, as crumb firmness increased, crust firmness and crumb moisture decreased.     

Comparison of Small and Large Deformation Rheological Properties of Wheat Dough and Gluten

The rheological properties of dough and gluten are important for end‐use quality of flour but there is a lack of knowledge of the relationships between fundamental and empirical tests and how they relate to flour composition and gluten quality. Dough and gluten from six breadmaking wheat qualities were subjected to a range of rheological tests. Fundamental (small‐deformation) rheological characterizations (dynamic oscillatory shear and creep recovery) were performed on gluten to avoid the nonlinear influence of the starch component, whereas large deformation tests were conducted on both dough and gluten. A number of variables from the various curves were considered and subjected to a principal component analysis (PCA) to get an overview of relationships between the various variables. The first component represented variability in protein quality, associated with elasticity and tenacity in large deformation (large positive loadings for resistance to extension and initial slope of dough and gluten extension curves recorded by the SMS/Kieffer dough and gluten extensibility rig, and the tenacity and strain hardening index of dough measured by the Dobraszczyk/Roberts dough inflation system), the elastic character of the hydrated gluten proteins (large positive loading for elastic modulus [G′], large negative loadings for tan δ and steady state compliance [J_e⁰]), the presence of high molecular weight glutenin subunits (HMW‐GS) 5+10 vs. 2+12, and a size distribution of glutenin polymers shifted toward the high‐end range. The second principal component was associated with flour protein content. Certain rheological data were influenced by protein content in addition to protein quality (area under dough extension curves and dough inflation curves [W]). The approach made it possible to bridge the gap between fundamental rheological properties, empirical measurements of physical properties, protein composition, and size distribution. The interpretation of this study gave indications of the molecular basis for differences in breadmaking performance.