共查询到20条相似文献,搜索用时 0 毫秒
1.
Jae‐Bom Ohm Gary Hareland Senay Simsek Bradford Seabourn Elizabeth Maghirang Floyd Dowell 《Cereal Chemistry》2010,87(6):553-560
Molecular weight distribution (MWD) of proteins extracted from hard red spring wheat was analyzed by size‐exclusion HPLC to investigate associations with wheat and breadmaking quality characteristics. Certain protein fractions were related to associations between wheat and breadmaking parameters, specifically when effect of quantitative variation of protein on those parameters was statistically eliminated by partial correlation analysis. SDS‐unextractable high molecular weight polymeric proteins had positive partial correlations with percent vitreous kernel content and breadmaking parameters, including mix time and bread loaf volume. SDS‐extractable protein fractions that were eluted before the primary gliadin peak had positive partial correlations with kernel hardness and water absorption parameters. The proportion of main gliadin fractions in total protein had a negative partial correlation with bread loaf volume and positive correlations with kernel hardness and water absorption parameters. Intrasample uniformity in protein MWD and kernel characteristics was estimated from three kernel subsamples that were separated according to single kernel protein content within individual wheat samples by a single‐kernel near‐infrared sorter. Wheat subsamples were significantly different in protein MWD. Intrasample uniformity in protein MWD did not differ greatly among wheat samples. 相似文献
2.
3.
Colors of noodle doughs made from hard white winter wheat flours from Oregon were measured at optimum noodle water absorptions (NWA). Partial correlations, removing effect of protein concentration, indicated that NWA had negative relationships with 0 hr L* and 24 hr b*, and positive relationships with 0 and 24 hr a*. Kernel hardness index had positive simple and partial correlations with NWA without any significant (P < 0.05) correlation with color parameters. High molecular weight glutentin subunits (HMW‐GS) significantly (P < 0.05) affected all measured noodle parameters except for 0 hr L*. Covariance analysis, using protein concentration as a covariate, indicated that HMW‐GS significantly affected NWA and a* (P < 0.01). Wheat cultivars with HMW‐GS 17+18 showed significantly higher mean NWA and a* values than those with alternative Glu‐B1 subunits. Protein molecular weight distributions affected noodles, as shown by significant correlations with absorbance areas and % areas of protein size exclusion (SE) HPLC chromatograms. Protein fractions that had positive correlations with redness had negative correlations with yellowness. Applying multivariate analyses to SE‐HPLC data to derive calibration models to predict fresh noodle dough a* and b* values had R2 > 0.91 and cross validations values of R2 > 0.75. 相似文献
4.
斯卑尔脱小麦高分子量谷蛋白亚基组成分析 总被引:19,自引:0,他引:19
采用十二烷基硫酸钠-聚丙烯酰胺凝胶电泳(SDS-PAGE)方法,鉴定分析了80份斯卑尔脱小麦(Triticum spelta L.)高分子量谷蛋白亚基(HMW-GS)组成特点,3个位点上一共检测到13种不同的亚基类型,其中在Glu-Al和Glu-Bl位点上,以1和6+8亚基出现频率最高,分别高达93.75%和78.75%,与普通小麦(T.aestivum L.)相比,斯卑尔脱小麦高分子量谷蛋白亚基具有其明显的组成特点。在Glu-Dl位点上,斯卑尔脱小麦以2+12亚基出现频率最高(87.5%),5+10亚基次之(11.25%)。表明2+12亚基和5+10亚基为其主要变异类型,这与普通小麦的研究结果相似,但远低于粗山羊草(Aegilops squarrosa L.)1D染色体上的高分子量谷蛋白亚基变异形式。另外,研究还筛选出9份具有5+10优质亚基的材料,为提高斯卑尔脱小麦与普通小麦是杂交种的品质杂种优势提供了基础材料。 相似文献
5.
High-molecular weight glutenin subunits (HMW-GS) of wheat were extracted by various combinations of reducing agents, salt solutions, and solvents. Preferential extraction of 1D-encoded HMW-GS occurred when flours were extracted with Tris-HCl SDS buffer at pH 6.8 containing 6% mercaptoethanesulfonic acid sodium salt (MESNA) and analyzed by SDS-PAGE. Similar effects were also found when dithiothreitol or β-mercaptoethanol were used in conjunction with nonchaotropic salts. If flours were first extracted with 50% 1-propanol, the extraction procedure yielded all HMW-GS, even in the presence of MESNA or high levels of salts. Addition of alcohols or chaotropes to the Tris buffer solutions containing MESNA or of solutions containing salt also extracted all HMW-GS. The HMW-GS reported most important in baking quality were found preferentially extracted by nonchaotropic salts and reducing agents. This is related to gluten aggregation and the gliadin-glutenin interaction and structure. 相似文献
6.
N. Radovanovic S. Cloutier D. Brown D. G. Humphreys O. M. Lukow 《Cereal Chemistry》2002,79(6):843-849
A total of 162 doubled haploid (DH) lines were produced from a cross between Triticum aestivum L. ‘AC Karma’ and line 87E03‐S2B1 to study the genetic contribution of high molecular weight (HMW) glutenin subunits to gluten strength. HMW glutenin subunit composition of each DH line was determined by SDS‐PAGE. The population was grown in the field at one location in 1999 and at three locations in 2000. Gluten strength and dough mixing properties were measured by mixograph test and SDS‐sedimentation test. Variance components were estimated for each measurement to determine the variability contributed by HMW glutenin subunits. Results indicated significant environmental impact on tested mixograph parameters, SDS‐sedimentation volumes and grain and flour protein concentration. Significant main effects of Glu‐1D loci encoded subunits were obtained for mixograph development time, energy to peak, slope after peak, and first minute slope. Lines containing 5+10 combination of subunits had higher values for mixograph development time and energy to peak, while slope after peak and first minute slope were lower as compared with 2+12 containing lines. Low intergenomic interactions were observed for bandwidth energy (BWE), total energy (TEG), and SDS‐sedimentation test, involving B and D genomes only. A portion of the genetic variability for gluten strength was accounted for overexpression of Bx7 subunit originating from the cultivar Glenlea derived line 87E03‐S2B1. There was no significant effect of Glu‐A1 encoded subunits on any of the tested parameters. Estimated genetic variability for gluten strength contributed by Glu‐B1 and Glu‐D1 encoded HMW glutenins was 55% for mixing development time and 51% for energy to peak. 相似文献
7.
This research aims to investigate the relationship between the solvent retention capacity (SRC) test and quality assessment of hard red spring (HRS) wheat flour samples obtained from 10 HRS cultivars grown at six locations in North Dakota. The SRC values were significantly (P < 0.05) correlated with flour chemical components (protein, gluten, starch, and damaged starch contents, except arabinoxylan); with farinograph parameters (stability [FST], water absorption, peak time [FPT], and quality number); and with breadmaking parameters (baking water absorption [BWA], bread loaf volume [BLV], and symmetry). Differences in locations and cultivars contributed significantly to variation in quality parameters and SRC values. Suitability of SRC parameters for discriminatory analysis of HRS wheat flour is greatly influenced by molecular weight distribution (MWD) of SDS‐unextractable proteins. SRC parameters, except for sucrose SRC, showed significant (P < 0.01) and positive correlations with high‐molecular‐weight (HMW) polymeric proteins in SDS‐unextractable fractions, whereas only lactic acid SRC exhibited significant (P < 0.01) correlations with low‐molecular‐weight polymeric proteins. HMW polymeric proteins also exhibited positive associations with FPT, FST, BWA, and BLV. The discrepant variation in association of SRC parameters with respect to MWD of SDS‐unextractable proteins could improve segregation of HRS wheat flour samples for quality. 相似文献
8.
卫星搭载小麦SP3代高分子麦谷蛋白亚基的SDS-PAGE分析 总被引:3,自引:2,他引:1
利用十二烷基磺酸钠-聚丙烯胺凝胶电泳(SDS-PAGE)技术对返回式卫星搭载小麦两个品种SP3代籽粒的高分子麦谷蛋白亚基(HMW-GS)进行了分析,并按照相关评分方法计算了高分子量麦谷蛋白Glu-1位点的品质得分。结果表明,经卫星搭载可产生较高频率的HMW-GS基因变异,陕253和西农1043 两个品种SP3代HMW-GS组成的变异频率分别为27.08%和27.45%。陕253和西农1043 SP3代的小麦品质得分分别为7分和6分,陕253 SP3代变异株为优质小麦。 相似文献
9.
Dark, hard, and vitreous kernel content is an important grading characteristic for hard red spring (HRS) wheat in the United States. This research investigated the associations of kernel vitreousness (KV) and protein content (PC) levels with protein molecular weight distribution (MWD), milling quality, and breadmaking quality characteristics of HRS wheat. The U.S. regional crop quality survey samples from three consecutive growing years were combined into three composite samples with different levels of wheat PC and then further segregated into separate samples with three different levels of KV. Analysis of variance showed that KV level had significant (P < 0.001) effect on variation in test weight, break flour yield, and damaged starch content. Among protein MWD parameters analyzed by size‐exclusion HPLC, the high‐molecular‐weight polymeric proteins in the SDS‐unextractable fraction had significant (P < 0.01) association with KV. Regression analysis indicated that addition of KV to the PC level improved the model for both farinograph and baking water absorption values in all three growing years. This information could help the flour milling and baking industries to further segregate HRS wheat based on KV levels in addition to PC levels for their intended end‐use applications. 相似文献
10.
High and low molecular weight glutenin subunits (HMW‐GS and LMW‐GS, respectively) are the main factors determining the viscoelastic properties of wheat dough. The mechanical and viscoelastic properties of 29 samples of wheat kernels differing in HMW‐GS were evaluated with load‐compression tests. Samples were grouped by genotypes differing in HMW‐GS composition (allelic variants: Glu‐A1: null, 1, 2*; Glu‐B1: 7, 7+8, 7+9, 13+16, and 17+18; Glu‐D1: 5+10, 2+12). Groups representing Glu‐A1 1 and 2*; Glu‐B1 7, 7+9 and 17+18; and Glu‐D1 5+10 generally possessed hard grain and showed the largest kernel elasticity values, while those representing subunits Glu‐A1 null; Glu‐B1 7+8; and Glu‐D1 2+12 had soft kernels and showed lower elastic work values. Genotypes possessing HMW‐GS 1, 17+18 and 5+10 gave large SDS‐sedimentation values and better dough viscoelastic properties than those with allelels: null, 7+8, and 2+12. Kernel hardness showed significant correlation with the dough‐strength‐related parameters: SDS‐sedimentation; dough mixing time; and the alveographic parameters, W and P. There was a negative correlation between kernel plastic work and dough mixing time and the dough tenacity/extensibility parameters, P/L. The significant relationship between sedimentation tests and kernel elastic work seems to indicate that elastic work is related to genotype (protein composition). The general tendency was that higher values in kernel elastic work and size corresponded to better dough rheological quality. Mechanical properties of the kernel were significantly related to the elastic behavior measured in a single wheat kernel. The use of the compression test on individual kernels is easy, rapid and nondestructive and therefore seems to show potential use as a rapid tool in breeding to improve wheat quality. 相似文献
11.
Ten glutenin fractions were separated by sequential extraction of wheat gluten protein with dilute hydrochloric acid from defatted glutenin‐rich wheat gluten of the Canadian hard red spring wheat (HRSW) cultivar Glenlea. The molecular weight distribution (MWD) of 10 different soluble glutenin fractions was examined by multistacking SDS‐PAGE under nonreduced conditions. Also, the subunit composition of the different glutenin fractions was determined by SDS‐PAGE under reduced conditions. The MWD of the fractions (especially HMW glutenins) varied from fraction to fraction. From early to later fractions, the MWD shifted from low to high. The early extracted fractions contained more LMW glutenin subunits (LMW‐GS) and less HMW glutenin subunits (HMW‐GS). The later extracted fractions and the residue fraction contained much more HMW‐GS (2*, 5, and 7 subunits) than the early extracted fractions. The trend in the amounts of 2*, 5, and 7 subunits in each fraction from low to high matched the extraction solvent sequence containing from lower to higher levels of HCl. The influence of glutenin protein fractions from the extra‐strong mixing cultivar, Glenlea, on the breadmaking quality of the weak HRSW, McVey, was assessed by enriching (by 1%) the McVey base flour with isolated glutenin protein fractions from Glenlea. The mixograph peak development times and loaf volumes of enriched flour were measured in an optimized baking test. The results indicated that the higher content in Glenlea glutenin of HMW‐GS with higher molecular weight, such as 2*, 5, and 7, seem to be the critical factor responsible for the strong mixing properties of Glenlea. Our results confirmed that subunit 7 occurred in the highest quantity of all the HMW‐GS. Therefore, it seems that the greater the content of larger molecular weight glutenin subunits, the larger the glutenin polymers and the stronger the flour. 相似文献
12.
Abrar Hussain Hans Larsson Ramune Kuktaite Maria Luisa Prieto‐Linde Eva Johansson 《Cereal Chemistry》2013,90(1):80-86
In the present study, we evaluated 444 organically grown wheat genotypes for the amount and size distribution of polymeric proteins by size‐exclusion HPLC. The investigated genotypes were divided into six genotype groups—selection, spelt, old cultivar, primitive, landrace, and cultivar—and these were grown in four different locations, namely, Alnarp, Bohuslän, Gotland, and Uppsala in Sweden. The results showed that the percentage of unextractable polymeric proteins in total polymeric proteins (%UPP) and percentage of large unextractable polymeric proteins in total polymeric proteins were higher in the cultivar group as compared with the rest of the investigated genotype groups. The amounts of total extractable polymeric proteins (TOTE) and total unextractable polymeric proteins were low in cultivars and selections, respectively. Spring wheat grain was found to have a significantly higher amount of all protein fractions as compared with winter wheat. The genotype Kenya was found to belong to both groups of the 20 genotypes with the highest TOTE and %UPP. Thus, the genotype Kenya might be of relevance for consumption and future breeding to improve the breadmaking quality of organically produced wheat. 相似文献
13.
Glucose, maltose, maltotriose, maltotetraose, α- and γ-cyclodextrins, and maltodextrins from potato starch (average degree of polymerization [DP] of 17) and maize starch (average DP of 20) were added to wheat flour-water doughs at levels of 1.0 and 3.0% (based on dry flour weight). Additions of 3.0% (w/w) α- and γ-cyclodextrins increased the 500 farinograph unit (FU) consistency by 174 and 193 FU, respectively, while the same levels of potato and maize starch dextrins increased the consistency by 32 and 21 FU, respectively. Expressed in an alternative way, the water absorption corresponding to 500 FU consistency was increased by 4.2 and 4.6% after addition of 3.0% (w/w) α- and γ-cyclodextrins, respectively. Differential scanning calorimetry was used to evaluate the direct effects of addition of low molecular weight carbohydrates on amylopectin recrystallization in baked flour-water doughs. A significant reduction in amylopectin recrystallization was found after the addition of 3.0% (w/w) γ-cyclodextrin after seven days of storage of the baked wheat flour-water dough. 相似文献
14.
The mechanical and viscoelastic properties of intact wheat kernels of 36 wheat cultivars differing in low molecular weight glutenin subunit (LMW‐GS) composition (loci Glu‐A3, Glu‐B3, and Glu‐D3) were evaluated using load‐compression tests. Comparison among genotypic groups representing Glu‐3 allelic variants showed that groups representing the alleles Glu‐A3 b, c, and d; Glu‐B3 d, g, and h; and Glu‐D3 a, b, and d, had harder kernel texture, higher kernel elastic work and larger gluten strength‐related parameters than those possessing alleles Glu‐A3 e; Glu‐B3 f, i and j (translocation 1B/1R); and Glu‐D3 d. Modulus of elasticity (stress to strain ratio) showed low values (111.9–168.8 MPa) for allelic groups possessing poor elastic properties (Glu‐A3 e; Glu‐B3 f, i, and j; and Glu‐D3 d), and high values (179.8–222.6 MPa) for allelic groups possessing high kernel elastic properties (Glu‐A3 b c, and d; Glu‐B3 d, g, and h; and Glu‐D3 a, b and c). The highest values for gluten strength‐related parameters (SDS‐sedimentation, dough mixing time, and dough strength [W]) corresponded to allelic groups Glu‐A3 d; Glu‐B3 d and g; and Glu‐D3 d, while the lowest corresponded to Glu‐A3 e and Glu‐B3 j. No significant differences were observed among groups with regard to gluten extensibility parameters; however, the highest P/L value (least extensibility) corresponded to Glu‐B3 j, which indicates presence of 1B/1R translocation. Except for the Glu‐B3 j (translocation 1B/1R) allele, which presented more variation within samples, a general relationship between kernel viscoelastic properties and dough viscoelastic properties was observed; samples showing higher elastic work to plastic work ratio (E/P) tended to possess better gluten strength than cultivars with low E/P ratio. 相似文献
15.
High molecular weight (HMW) or low molecular weight (LMW) subunits of different chemical state (reduced, reoxidized with KBrO3, or KIO3) or gliadins were added in 1% amounts to a base flour of the wheat cultivar Rektor and mixed with water. The corresponding doughs were then characterized by microscale extension tests and by microbaking tests and were compared to doughs from the base flour without additives. The maximum resistance of dough was strongly increased by HMW subunits in a reduced state and by HMW subunits reoxidized with KBrO3. A moderate increase of resistance was caused by HMW subunits reoxidized with KIO3 and by LMW subunits reoxidized with KBrO3 or KIO3. This resistance was strongly lowered by LMW subunits in a reduced state and by gliadins. The extensibility of dough was significantly increased only by gliadins and reduced HMW subunits; HMW subunits reoxidized with KBrO3 had no effect, and all other fractions had a decreasing effect. In particular, glutenin subunits reoxidized with KIO3 induced marked decrease of extensibility, resulting in bell‐shaped curve extensigrams, which are typical for plastic properties. The effect of reoxidized mixtures (2:1) of HMW and LMW subunits on maximum resistance depended on the oxidizing agent and on the conditions (reoxidation separated or together); extensibility was generally decreased. Bread volume was increased by addition of HMW subunits (reduced or reoxidized with KBrO3) and decreased by LMW subunits (reoxidized with KBrO3 or KIO3) and by a HMW‐LMW subunit mixture (reoxidized with KBrO3). The volume was strongly decreased by addition of reduced LMW subunits. A high bread volume was related to higher values for both resistance and extensibility. 相似文献
16.
A quick method for the separation of the main size classes of wheat endosperm proteins using size‐exclusion HPLC is presented. Separations achieved in a 10‐min run showed high correlation with the reference method of our laboratory (35‐min) using the same type of column. The clear separation obtained allows a quick analytical determination of important parameters such as the proportion of the main classes of wheat endosperm protein, the glutenin‐to‐gliadin ratio, and the percentage of unextractable (SDS‐soluble with sonication) polymeric protein, all of which have been closely correlated with breadmaking quality parameters. The improved method offers the advantages of better utilization of valuable resources such as HPLC equipment, quicker analysis of large sample sets, and collection of eluted fractions. 相似文献
17.
The progenies of four intervarietal durum wheat crosses were used to determine the effects of glutenin variants coded at Glu‐1 and Glu‐3 loci on durum wheat quality properties. The F2 lines were analyzed for high molecular weight (HMW) and low molecular weight (LMW) glutenin composition by electrophoresis. Whole grain derived F3 and F4 samples were analyzed for vitreousness, protein, and dry gluten contents, gluten index, SDS sedimentation volume, mixograph, and alveograph properties. Allelic variation at the Glu‐B1 and Glu‐B3 loci affected gluten quality significantly. Comparisons among the Glu‐B3 and Glu‐B1 loci indicated that the LMW glutenin subunits controlled by Glu‐B3 c and j made the largest positive contribution, followed by the alleles a, k, and b. HMW glutenin subunits 14+15 gave larger SDS values and higher mixing development times than subunits 7+8 and 20. The positive effects of the glutenin subunits LMW c and HMW 14+15 were additive. Flour protein content, vitreousness, and mixograph peak height values were positively correlated with each other as well as with Dglut values, whereas the SDS sedimentation highly correlated with mixing development time, alveograph strength, and extensibility but was not correlated with the other parameters. The results of quality analysis, together with the results of the genetic analysis, led to the conclusion that SDS sedimentation, mixograph mixing development time, and peak breakdown are the tests more influenced by allelic variation of prolamin. The uses of the results in durum wheat quality breeding programs are discussed. 相似文献
18.
新疆小麦地方品种资源HMW-GS的遗传多样性组成分析 总被引:2,自引:0,他引:2
为了明确新疆小麦地方品种高分子量麦谷蛋白亚基的遗传多样性,并为小麦品质改良提供基础材料,利用十二烷基硫酸钠聚丙烯酰胺凝胶电泳(SDS-PAGE) 技术,分析了源自新疆地区的282份小麦地方品种的高分子量麦谷蛋白亚基组成。结果表明,在Glu-A1、Glu-B1和Glu-D1位点上的等位变异分别为3、6和 5种,三个位点上的优势亚基依次为null、7+8和2+12,其频率分别是75.5%、90.8%和72.0%。在Glu-1位点共检测到20种亚基组合,其中(null, 7+8, 2+12)组合的频率最高,为52.8%, 其次是(null, 7+8, 2.6+12)和(2*, 7+8, 2+12)组合,其频率分别为14.1%和11.0%,其它亚基组合的频率均低于10%。另外,在Glu-D1位点上还检测到一个新的亚基2.6+12。在供试的282份新疆地方品种中发现了两份具有优质亚基组合的材料,它们的亚基组成为(2*, 7+9, 5+10)和(1, 7+9, 5+10),这些地方品种可作为改良小麦品质性状的重要遗传资源。 相似文献
19.
S. Uthayakumaran H. L. Beasley F. L. Stoddard M. Keentok N. Phan‐Thien R. I. Tanner F. Bks 《Cereal Chemistry》2002,79(2):294-300
The high molecular weight glutenin subunits (HMW‐GS) play an important role in governing the functional properties of wheat dough. To understand the role of HMW‐GS in defining the basic and applied rheological parameters and end‐use quality of wheat dough, it is essential to conduct a systematic study where the effect of different HMW‐GS are determined. This study focuses on the effect of HMW‐GS on basic rheological properties. Eight wheat lines derived from cvs. Olympic and Gabo were used in this study. One line contained HMW‐GS coded by all three loci, three lines were each null at one of the loci, three lines were null at two of the loci and one line null at all three loci. The flour protein level of all samples was adjusted to a constant 9% by adding starch. In another set of experiments, in addition to the flour protein content being held at 9%, the glutenin‐to‐gliadin ratio was maintained at 0.62 by adding gliadin. Rheological properties such as elongational, dynamic, and shear viscometric properties were determined. The presence of Glu‐D1 subunits (5+10) made a significantly larger contribution to dough properties than those encoded by Glu‐B1 (17+18), while subunit 1, encoded by Glu‐A1, made the least contribution to functionality. Results also confirmed that HMW‐GS contributed to strength and stability of dough. 相似文献
20.
Kernel vitreousness is an important grading characteristic for segregation of subclasses of hard red spring (HRS) wheat in the United States. This research investigated the protein molecular weight distribution (MWD) and the flour and baking quality characteristics of different HRS wheat market subclasses. The U.S. regional crop quality survey samples obtained from six regions for three consecutive growing years were used for subclass segregation based on the dark, hard, and vitreous (DHV) kernel percentage. Flour milled from HRS wheat with greater percentages of DHV kernel showed higher water absorption capacity for breadmaking. Protein MWD parameters could be related to the association between DHV kernel level and water absorption. Specifically, flour protein fractions rich in gliadins and high‐molecular‐weight polymeric proteins in the SDS‐unextractable fraction were identified to have significant and positive correlations with both DHV kernels and flour water absorption levels. An example further showed the importance of flour water absorption on potential economic incentives that can be gained with having a greater percentage of vitreous kernels. This information could help the flour milling and baking industry to segregate the different subclasses of HRS wheat with varying DHV content for their intended end‐use applications. 相似文献