Protein and Quality Characterization of Triticale Translocation Lines in Breadmaking

Introduction of high molecular weight glutenin subunits (HMW‐GS) from the Glu‐D1d locus of wheat into triticale restores the genetic constitution of high molecular weight glutenin loci to that of wheat and subsequently improves the breadmaking quality of triticale. One means of achieving such restoration of the genetic constitution is through the use of translocation lines. The aim of this study was to evaluate and compare the performance of translocations 1A.1D and 1R.1D with HMW‐GS 5+10 and 2+12 in terms of physical dough tests and baking quality using four different sets of triticale lines, GDS7, Trim, Rhino, and Rigel. In general, significantly lower milling quality (flour yield), very low mixing times with lower loaf volume were typical of all the triticales studied except 1A.1D 5+10 lines, when compared to hard wheat flour (Pegaso). Among the lines studied, significantly higher loaf volume, mixograph dough development time (MDDT), and maximum resistance to extension (R_max) were observed with 1A.1D 5+10 lines indicating that translocation of the Glu‐D1d allele with HMW‐GS 5+10 was beneficial in terms of improving the quality attributes. Although pure triticale flour from these lines did not possess the functional characteristics for good quality bread, the translocation 1A.1D that contains HMW glutenin subunits 5+10 showed significant improvement in quality characteristics, and could reasonably be expected to yield commercially satisfactory bread loaves when combined with bread wheat flour. Significantly higher UPP, R_max, and MDDT values along with a lower gliadin‐to‐glutenin ratio in 1A.1D 5+10 of GDS7 and Rigel sets indicate that the molecular weight distribution was shifted to higher molecular weights, resulting in greater dough strength associated with 5+10 subunits.     

Quantitative Determination of High Molecular Weight Glutenin Subunits of Hard Red Spring Wheat by SDS-PAGE. I. Quantitative Effects of Total Amounts on Breadmaking Quality Characteristics

Thirteen hard red spring wheat genotypes in which seven genotypes had the same high molecular weight (HMW) glutenin subunits (2*, 7+9, 5+10) were compared for their physical-chemical and breadmaking properties. These samples were categorized into three groups based on their dough mixing and baking performances as follows: the strong dough (SD) group (six genotypes), characterized by the strongest dough mixing (average stability, 35 min); the good loaf (GL) group (four genotypes), characterized by the largest loaf volume; and the poor loaf (PL) group (three genotypes), characterized by the smallest loaf volume. Total flour proteins were fractionated into 0.5M salt-soluble proteins, 2% SDS-soluble proteins, and residue proteins (insoluble in SDS buffer). SDS-soluble proteins, residue proteins, and total flour proteins were analyzed by SDS-PAGE and densitometry procedures to determine the proportions of HMW glutenin subunits, medium molecular weight proteins, and low molecular weight proteins in relation to the total amount of proteins. No differences in the amount of salt-soluble proteins were found among the different groups of samples. Solubilities of gluten proteins (total proteins minus salt-soluble proteins) in SDS buffer were related to the differences in dough strength and baking quality among the three groups. The SD group had the lowest solubility and the PL group had the highest. SDS-PAGE analysis showed that SDS-soluble proteins of the SD group contained a smaller amount of HMW glutenin subunits than those of the GL and PL groups. The highest proportions of HMW glutenin subunits in total flour proteins were found in the SD group, while the PL group had the lowest percentage of HMW glutenin subunits in their total flour proteins. These results showed that the total quantities of HMW glutenin subunits played an important role in determining the dough mixing strength and breadmaking performance of hard red spring wheats.     

Transgenic Enhancement of High‐Molecular‐Weight Glutenin Subunit 1Dy10 Concentration: Effects in Wheat Flour Blends and Sponge and Dough Baking

Dough strength is needed for efficient breadmaking quality. This property is strongly influenced in wheat (Triticum aestivum L.) by gluten seed storage proteins and, in particular, by high‐molecular‐weight (HMW) glutenin subunit composition. Experiments were designed to elevate expression of a key native HMW glutenin subunit (1Dy10) via genetic engineering and to determine whether resultant flours can be used in sponge and dough applications, the most common commercial bread‐baking procedure. Both unblended and blended samples from transgenic and nontransgenic sister lines were tested, with blended samples being formed by addition to a control sample. Dough properties, as determined by farinograph evaluation, were improved by the transgene‐encoded increases in 1Dy10 in both undiluted and blended flours. Mean farinograph stability of transgenic samples was twice that of the control, and blends with transgenic samples demonstrated increases in stabilities proportional to the amount of transgenic flour included. Mean farinograph quality numbers of transgenic samples, and of all blends containing transgenic flour, were significantly higher than both the control and all nontransgenic treatments. In the sponge and dough bake procedure, undiluted transgenic samples induced lower scores, relative to both control and undiluted nontransgenic samples, for water absorption, crumb body firmness, and loaf volume. In blends, however, the transgenic samples resulted in improvements in some sponge and dough loaf attributes, including loaf symmetry and crumb color score, without any concomitant loss of loaf volume in transgenic blends. These improved variables relate to finished product appearance and to consumer selection in markets. The use of transgenic flours with increased 1Dy10 glutenin content in commercial blends could provide advantages in sponge and dough bake applications.     

Comparison of Quality Characteristics and Breadmaking Functionality of Hard Red Winter and Hard Red Spring Wheat

Various whole‐kernel, milling, flour, dough, and breadmaking quality parameters were compared between hard red winter (HRW) and hard red spring (HRS) wheat. From the 50 quality parameters evaluated, values of only nine quality characteristics were found to be similar for both classes. These were test weight, grain moisture content, kernel size, polyphenol oxidase content, average gluten index, insoluble polymeric protein (%), free nonpolar lipids, loaf volume potential, and mixograph tolerance. Some of the quality characteristics that had significantly higher levels in HRS than in HRW wheat samples included grain protein content, grain hardness, most milling and flour quality measurements, most dough physicochemical properties, and most baking characteristics. When HRW and HRS wheat samples were grouped to be within the same wheat protein content range (11.4–15.8%), the average value of many grain and breadmaking quality characteristics were similar for both wheat classes but significant differences still existed. Values that were higher for HRW wheat flour were color b*, free polar lipids content, falling number, and farinograph tolerance. Values that were higher for HRS wheat flour were geometric mean diameter, quantity of insoluble polymeric proteins and gliadins, mixograph mix time, alveograph configuration ratio, dough weight, crumb grain score, and SDS sedimentation volume. This research showed that the grain and flour quality of HRS wheat generally exceeds that of HRW wheat whether or not samples are grouped to include a similar protein content range.     

Predicting Wheat Quality Characteristics and Functionality Using Near‐Infrared Spectroscopy

The accuracy of using near‐infrared spectroscopy (NIRS) for predicting 186 grain, milling, flour, dough, and breadmaking quality parameters of 100 hard red winter (HRW) and 98 hard red spring (HRS) wheat and flour samples was evaluated. NIRS shows the potential for predicting protein content, moisture content, and flour color b* values with accuracies suitable for process control (R² > 0.97). Many other parameters were predicted with accuracies suitable for rough screening including test weight, average single kernel diameter and moisture content, SDS sedimentation volume, color a* values, total gluten content, mixograph, farinograph, and alveograph parameters, loaf volume, specific loaf volume, baking water absorption and mix time, gliadin and glutenin content, flour particle size, and the percentage of dark hard and vitreous kernels. Similar results were seen when analyzing data from either HRW or HRS wheat, and when predicting quality using spectra from either grain or flour. However, many attributes were correlated to protein content and this relationship influenced classification accuracies. When the influence of protein content was removed from the analyses, the only factors that could be predicted by NIRS with R² > 0.70 were moisture content, test weight, flour color, free lipids, flour particle size, and the percentage of dark hard and vitreous kernels. Thus, NIRS can be used to predict many grain quality and functionality traits, but mainly because of the high correlations of these traits to protein content.     

Protein Allelic Composition,Dough Rheology,and Baking Characteristics of Flour Mill Streams from Wheat Cultivars with Known and Varied Baking Qualities

Flour mill streams obtained by milling grain of 10 bread wheat cultivars grown in the Skopje region of Macedonia were analyzed for rheological and breadmaking quality characteristics and for composition of gliadins and HMW‐GS. The objective of this study was to examine the relationships between the composition of gluten proteins and breadmaking quality, as well as to determine the importance of gluten proteins for technological quality of flour mill streams. The grain was milled in an experimental mill according to a standardized milling procedure, with three break and three reduction passages. The addition of two vibratory finishers in the milling scheme enabled better separation of bran. A small‐scale baking method for evaluation of the breadmaking properties was developed, and electrophoretic methods including acid‐PAGE and SDS‐PAGE were used to determine the composition of the gluten proteins. There were significant differences in the degree of dough softening of individual and total flour fractions of the flour mill streams for cultivars with different alleles from six loci, for farinograph water absorption from seven loci, and for bread loaf volume and crumb quality score from six loci. The Glu‐1 quality scores for the wheat cultivars investigated were 3–9 and proved to be a useful indicator of breadmaking quality. The novel feature of the investigation related to the breadmaking potential of the flour mill streams compared with straight‐run flours.     

Breadmaking Quality of Selected Durum Wheat Genotypes and Its Relationship with High Molecular Weight Glutenin Subunits Allelic Variation and Gluten Protein Polymeric Composition

Twenty‐seven durum wheat genotypes originating from different geographical areas, all expressing LMW‐2 at Glu‐B3, and five bread wheats were evaluated for flour mixing properties, dough physical characteristics, and baking performance. Gluten polymeric composition was studied using size‐exclusion HPLC of unreduced flour protein extracts. As a group, durum wheats had poorer baking quality than bread wheats in spite of higher protein and total polymer concentrations. Durum wheats exhibited weaker gluten characteristics, which could generally be attributed to a reduced proportion of SDS‐unextractable polymer, and produced less extensible doughs than did bread wheats. However, substantial variation in breadmaking quality attributes was observed among durum genotypes. Better baking performance was generally associated with greater dough extensibility and protein content, but not with gluten strength related parameters. Extensibility did not correlate with gluten strength or SEHPLC parameters. Genotypes expressing high molecular weight glutenin subunits (HMW‐GS) 6+8 exhibited better overall breadmaking quality compared with those expressing HMW‐GS 7+8 or 20. Whereas differences between genotypes expressing HMW‐GS 6+8 and those carrying HMW‐GS 7+8 could only be attributed to variations in extensibility, the generally inferior baking performance of the HMW‐GS 20 group relative to the HMW‐GS 6+8 group could be attributed to both weaker and less extensible gluten characteristics.     

Intercultivar Variation in the Quantity of Monomeric Proteins,Soluble and Insoluble Glutenin,and Residue Protein in Wheat Flour and Relationships to Breadmaking Quality

A new fractionation procedure based on differential solubility was applied to wheat flour proteins to evaluate the relationship between protein fractions and functionality for breadmaking. Flour was initially extracted with 50% 1-propanol. Monomeric proteins (mainly gliadins) and soluble glutenin contained in the 50% propanol soluble extract were fractionated by selective precipitation of the glutenin by increasing the concentration of 1-propanol to 70%; monomeric proteins remain in the supernatant. Insoluble glutenin in the 50% propanol insoluble residue was extracted using 50% 1-propanol containing 1% dithiothreitol (DTT) at 60°C. Protein in the final residue was extracted using SDS with or without DTT. It comprised mainly Glu-1D high molecular weight glutenin subunits and nongluten polypeptides. For seven Canadian cultivars of diverse breadmaking quality, there was relatively little variation in the percentage of flour protein corresponding to monomeric proteins (48–52%) and residue protein (14–18%). In contrast, intercultivar variation in soluble and insoluble glutenin was substantial, with contents of 10–20% and 12–28% of flour protein, respectively. Soluble and insoluble glutenin were also highly correlated with physical dough properties, accounting for 83–95% of the variation of individual dough rheological parameters (except dough extensibility), and ≈ 74% of the variation in loaf volume. In contrast, monomeric and residue protein fractions were poorly associated with breadmaking quality. However, among the four protein fractions, only residue protein was significantly correlated (r = -0.79) with dough extensibility. The flour sample with the highest and lowest concentrations of insoluble and soluble glutenin, respectively, as well as marginally the lowest concentrations of monomeric and residue proteins was Glenlea, a cultivar of the Canada Western Extra Strong Red Spring wheat class which characteristically possesses distinctly strong dough mixing properties.     

Effect of the Molecular Weight Distribution of Glutenin Protein from an Extra‐Strong Wheat Flour on Rheological and Breadmaking Properties Through Reconstitution Studies

Ten glutenin fractions were separated by sequential extraction of wheat gluten protein with dilute hydrochloric acid from defatted glutenin‐rich wheat gluten of the Canadian hard red spring wheat (HRSW) cultivar Glenlea. The molecular weight distribution (MWD) of 10 different soluble glutenin fractions was examined by multistacking SDS‐PAGE under nonreduced conditions. Also, the subunit composition of the different glutenin fractions was determined by SDS‐PAGE under reduced conditions. The MWD of the fractions (especially HMW glutenins) varied from fraction to fraction. From early to later fractions, the MWD shifted from low to high. The early extracted fractions contained more LMW glutenin subunits (LMW‐GS) and less HMW glutenin subunits (HMW‐GS). The later extracted fractions and the residue fraction contained much more HMW‐GS (2*, 5, and 7 subunits) than the early extracted fractions. The trend in the amounts of 2*, 5, and 7 subunits in each fraction from low to high matched the extraction solvent sequence containing from lower to higher levels of HCl. The influence of glutenin protein fractions from the extra‐strong mixing cultivar, Glenlea, on the breadmaking quality of the weak HRSW, McVey, was assessed by enriching (by 1%) the McVey base flour with isolated glutenin protein fractions from Glenlea. The mixograph peak development times and loaf volumes of enriched flour were measured in an optimized baking test. The results indicated that the higher content in Glenlea glutenin of HMW‐GS with higher molecular weight, such as 2*, 5, and 7, seem to be the critical factor responsible for the strong mixing properties of Glenlea. Our results confirmed that subunit 7 occurred in the highest quantity of all the HMW‐GS. Therefore, it seems that the greater the content of larger molecular weight glutenin subunits, the larger the glutenin polymers and the stronger the flour.     

Effect of Multiple Substitution of Glutenin and Gliadin Proteins on Flour Quality of Canada Prairie Spring Wheat

The effect of genetic substitution of two to four glutenin and gliadin subunits from a Canada Prairie Spring (CPS) cv. Biggar BSR into Alpha 16, another CPS wheat line, was studied for rheological and baking quality. Results from double substitution showed that the presence of a gliadin component from Biggar BSR (BGGL) and low molecular weight glutenin subunit 45 (LMW 45) contributed to improved dough strength characteristics. Presence of BGGL in combination with high molecular weight glutenin subunit 1 (HMW 1) or 17+18 (HMW 17+18) also showed improved dough strength over control Alpha lines. When three or four protein subunits were substituted, even though improved quality performance was observed, it was associated with the negative effect of lowered flour water absorptions in spite of similar protein contents. The study confirms that LMW glutenins, as well as gliadins, play an important role along with HMW glutenins in wheat flour quality. CPS wheat lines with improved dough strength properties can be selected from the double substitution lines with the combination of BGGL/LMW 45 and BGGL/HMW 1.     

Relationship Between the Qualitative and Quantitative Compositions of Gluten Protein Types and Technological Properties of Synthetic Hexaploid Wheat Derived from Triticum durum and Aegilops tauschii

The contribution of the diploid wheat species Aegilops tauschii (Coss.) Schmall to the technological properties of bread wheat (Triticum aestivum L.) was previously studied by the investigation of synthetic hexaploids derived from tetraploid durum wheat (T. turgidum L.) and three diploid Ae. tauschii lines. The results indicated that bread volume, gluten index, SDS‐sedimentation volume, and maximum resistance of gluten were significantly influenced by the Ae. tauschii lines. To determine the relationship between technological properties and qualitative and quantitative compositions of gluten proteins, the flours of parental and synthetic lines were extracted using a modified Osborne fractionation. Gliadin and glutenin fractions were then characterized by reversed‐phase (RP) HPLC on C₈ silica gel. The HPLC patterns revealed typical differences between synthetic and parental lines. The gliadin patterns of three synthetic lines and the glutenin patterns of two synthetic lines were more similar to that of the diploid Ae. tauschii parents involved in the hybrids. In the glutenin pattern of one synthetic line, characteristics from both Ae. tauschii and the durum wheat parents were observed. The amount of total gliadin and gliadin types of the synthetic lines was mostly intermediate between those of the durum and Ae. tauschii parents. The amounts of total glutenin and glutenin types (HMW and LMW subunits) of the synthetic lines were generally higher than those of the parental lines, and the ratio of gliadins to glutenins was significantly decreased. High positive correlations were found between the amount of total glutenins, HMW, and LMW subunits and bread volume, maximum resistance and extension area of gluten, and SDS‐sedimentation volume. The ratio of gliadins to glutenin subunits had a strong negative influence on these properties. The protein content of the flours and the amount of total gluten proteins were not correlated with any of the technological properties. Results on the relationship between biochemical characteristics and the breadmaking properties indicated that wheat prebreeding would benefit from studies on protein types and quantification in the choice of parents. In addition, the potential of the diploid Ae. tauschii for improvement of breadmaking quality should be further exploited.     

Creep‐Recovery of Wheat Flour Doughs and Relationship to Other Physical Dough Tests and Breadmaking Performance

Measurements of creep‐recovery of flour‐water doughs were made using a dynamic mechanical analyzer (DMA) in a compression mode with an applied probe force of 50 mN. A series of wheat flour and blend samples with various breadmaking potentials were tested at a fixed water absorption of 54% and farinograph optimum water absorption, respectively. The flour‐water doughs exhibited a typical creep‐recovery behavior of a noncross‐linked viscoelastic material varying in some parameters with flour properties. The maximum recovery strain of doughs with a fixed water absorption of 54% was highly correlated (r = 0.939) to bread loaf volume. Wheat flours with a large bread volume exhibited greater dough recovery strain. However, there was no correlation (r = 0.122) between maximum creep strain and baking volume. The maximum recovery strain of flour‐water doughs also was correlated to some of the parameters provided by mixograph, farinograph, and TA‐XT2 extension.     

Quantitative Variation of HMW Glutenin Subunits from Hard Red Spring Wheats Grown in Different Environments

The objective of this study was to investigate the quantitative variation of HMW glutenin subunits in relation to glutenin polymers and hence breadmaking quality across different environments. Six genotypes of hard red spring (HRS) wheat were grown at seven locations in North Dakota in 1998 in a randomized complete‐block experimental design with three replicates at each location. Unreduced SDS‐soluble glutenins of flour were fractionated by multistacking SDS‐PAGE into different sized glutenin polymers, followed by SDS‐PAGE and imaging densitometry to determine the quantitative variation of HMW glutenin subunits. SDS‐insoluble glutenin polymers also were examined for their quantitative composition of HMW glutenin subunits. The results showed that the percentage of HMW glutenin subunits was significantly affected by growing locations. The quantity of HMW glutenin subunits in SDS‐insoluble glutenins was significantly and positively correlated with loaf volume. SDS‐insoluble glutenin polymers had a higher percentage of HMW glutenin subunits than did SDS‐soluble glutenins. SDS‐insoluble glutenin polymers in flour were positively and significantly correlated in proportions of both total and individual HMW glutenin subunits in total SDS glutenins. SDS‐insoluble glutenin polymers also were positively and significantly correlated with the combined proportion of HMW glutenin subunits 2* + 5. The results of this study indicated that either subunit 2* or 5 might be more important in forming a greater quantity of larger SDS‐insoluble glutenin polymers than other subunits. SDS‐insoluble glutenin polymers from different cultivars or locations could have different quantities of HMW glutenin subunits in their composition. SDS‐insoluble glutenin polymers with more HMW glutenin subunits might be larger sized than those with less HMW glutenin subunits. Environment significantly influenced the quantitative variation of HMW glutenin subunits, which in turn affected the size distribution of glutenin polymers, and hence breadmaking quality.     

Effects of Kernel Vitreousness and Protein Level on Protein Molecular Weight Distribution,Milling Quality,and Breadmaking Quality in Hard Red Spring Wheat

Dark, hard, and vitreous kernel content is an important grading characteristic for hard red spring (HRS) wheat in the United States. This research investigated the associations of kernel vitreousness (KV) and protein content (PC) levels with protein molecular weight distribution (MWD), milling quality, and breadmaking quality characteristics of HRS wheat. The U.S. regional crop quality survey samples from three consecutive growing years were combined into three composite samples with different levels of wheat PC and then further segregated into separate samples with three different levels of KV. Analysis of variance showed that KV level had significant (P < 0.001) effect on variation in test weight, break flour yield, and damaged starch content. Among protein MWD parameters analyzed by size‐exclusion HPLC, the high‐molecular‐weight polymeric proteins in the SDS‐unextractable fraction had significant (P < 0.01) association with KV. Regression analysis indicated that addition of KV to the PC level improved the model for both farinograph and baking water absorption values in all three growing years. This information could help the flour milling and baking industries to further segregate HRS wheat based on KV levels in addition to PC levels for their intended end‐use applications.     

Comparative Effects of 1BL/1RS Translocation in Relation to Protein Composition and Milling and Baking Quality of Soft Red Winter Wheat

Forty grain samples, derived from six soft red winter wheat lines with 1BL/1RS and four genotypes without the translocation, grown in four diverse environments, were used to assess test weight, flour yield, protein content of grain and flour, rheological properties, and end-use characteristics in cakes and cookies. Wheat lines with 1BL/1RS had similar or higher mean test weights than lines without the translocation. Mean flour yields were similar for the two groups. Test weight was not predictive of flour yield. Mean values for grain moisture, grain protein, and rheological properties, as measured by farinograph for mixing time stability and mixing tolerance index, were similar for wheat lines with and without 1BL/1RS. In several cases, flour from lines with 1BL/1RS produced dough with greater mixing tolerance and cakes with higher volume and softer texture than did check lines without the translocation. However, the translocation in these soft red winter wheat lines resulted in higher farinograph water absorption by the flour and decreased cookie spread. The results of this study were novel in that end-use, specifically baking quality of soft wheat lines with 1BL/1RS, varied dramatically depending on whether cookies or cakes were evaluated. Therefore, use of single-product baking tests may lead to false conclusions regarding end-use quality of 1BL/1RS soft wheat. Direct comparison between a pair of sister lines with and without 1BL/1RS indicated that the translocation had adverse effects on quality as exemplified by lower flour yield, greater farinograph water absorption, and reduced cookie diameter. However, the 1BL/1RS line had greater mixing tolerance and similar cake volume and texture scores in comparison to its sister line. In summary, 1BL/1RS lines were identified in which quality characteristics exceeded those of control cultivars and commercial flours. Genetic background and environmental factors probably affected milling and baking quality to a greater extent than the translocation. Many of the negative quality attributes previously associated with 1BL/1RS are probably due to genetic background effects and, therefore, could be greatly diminished with improvement of the genetic background in which the translocation resides.     

Rheological Properties of Full-Formula Doughs Derived from Near-Isogenic 1BL/1RS Translocation Lines

Four pairs of near-isogenic wheat lines, with and without the 1BL/1RS translocation, and differing at the Glu-1 loci (coding for high molecular weight [HMW] glutenin subunits) were evaluated for their dough mixing properties, dough stickiness, and baking performance. In all 1BL/1RS translocation lines, weakening of the dough consistency occurred within 2 min past peak time. The full-formula dough from every 1BL/1RS translocation line exhibited poor dough mixing characteristics and increased stickiness compared to the corresponding wheat control. The HMW glutenin subunits coded by the Glu-A1 locus had no apparent effect on mixing properties, but did have a slight effect on the dough stickiness at two of the four stages of dough mixing. Glu-B1 and Glu-D1 loci encoded glutenin subunits produced significant changes in dough mixing properties and dough stickiness, respectively. With respect to baking performance, there was no significant difference between loaf volumes of 1BL/1RS versus control wheats for three of four near-isogenic pairs. Within the 1RS-group, the translocation lines containing HMW glutenin subunits 5+10 produced bread with greater loaf volumes than the pairs containing its allelic counterpart 2+12. Loaf volume was not influenced by the subunits associated with the Glu-B1 loci. In general, the breads baked from 1BL/1RS translocation lines had a relatively poor crumb and crust quality and contained larger gas cells than the wheat controls. In comparing isogenic pairs, the magnitude of the difference in loaf volume between the control wheat and the corresponding 1BL/1RS translocation line was greater in the pair unique for HMW subunits 5+10; the difference was primarily due to the stronger mixing properties of the wheat control.     

Late nitrogen application increased protein concentration but not baking quality of wheat

Late application of nitrogen (N) fertilizers at heading or anthesis is usually performed to produce wheat (Triticum aestivum L.) with high bread‐making quality. However, increasing energy costs and ecological problems due to N losses call for efficient and simplified N fertilization strategies. This study aimed to investigate the effect of late N fertilization on grain protein quality and thus baking quality and to evaluate if similar wheat quality can be maintained without late N application. Field experiments with two winter wheat cultivars differing in quality groups were conducted. The fertilization treatments comprised a rate of 220 kg N ha^?1 applied in two or three doses (referred to as split N application), and 260 kg N ha^?1 applied in four doses (additional late N fertilization) with different N fertilizer types. The results show that although split N application had no effect on grain protein concentration (GPC), it affected N partitioning in the grain, increasing mainly the concentration and proportion of the glutenin fraction. As a result, baking quality was improved by split N application. Late N fertilization enhanced GPC and the relative abundance of certain high molecular weight glutenin subunits (HMW‐GS). However, it had no effect on N partitioning in the grain and did not further improve baking quality. No obvious differences were found between N fertilizer types on grain yield and quality. The N fertilization effect was more pronounced on the wheat cultivar whose baking quality was more dependent on protein concentration. In evaluating baking quality of wheat flour, gliadin and glutenin proportions were better correlated with loaf volume than the overall protein concentration.     

Relationship Between Solvent Retention Capacity and Protein Molecular Weight Distribution,Quality Characteristics,and Breadmaking Functionality of Hard Red Spring Wheat Flour

This research aims to investigate the relationship between the solvent retention capacity (SRC) test and quality assessment of hard red spring (HRS) wheat flour samples obtained from 10 HRS cultivars grown at six locations in North Dakota. The SRC values were significantly (P < 0.05) correlated with flour chemical components (protein, gluten, starch, and damaged starch contents, except arabinoxylan); with farinograph parameters (stability [FST], water absorption, peak time [FPT], and quality number); and with breadmaking parameters (baking water absorption [BWA], bread loaf volume [BLV], and symmetry). Differences in locations and cultivars contributed significantly to variation in quality parameters and SRC values. Suitability of SRC parameters for discriminatory analysis of HRS wheat flour is greatly influenced by molecular weight distribution (MWD) of SDS‐unextractable proteins. SRC parameters, except for sucrose SRC, showed significant (P < 0.01) and positive correlations with high‐molecular‐weight (HMW) polymeric proteins in SDS‐unextractable fractions, whereas only lactic acid SRC exhibited significant (P < 0.01) correlations with low‐molecular‐weight polymeric proteins. HMW polymeric proteins also exhibited positive associations with FPT, FST, BWA, and BLV. The discrepant variation in association of SRC parameters with respect to MWD of SDS‐unextractable proteins could improve segregation of HRS wheat flour samples for quality.     

Tyrosine cross-links: molecular basis of gluten structure and function

The formation of the large protein structure known as "gluten" during dough-mixing and bread-making processes is extremely complex. It has been established that a specific subset of the proteins comprising gluten, the glutenin subunits, directly affects dough formation and breadmaking quality. Glutenin subunits have no definitive structural differences that can be directly correlated to their ability to form gluten and affect dough formation or breadmaking quality. Many protein structural studies, as well as mixing and baking studies, have postulated that disulfide bonds are present in the gluten structure and contribute to the process of dough formation through the process of disulfide-sulfhydryl exchange. Evidence presented here indicates that tyrosine bonds form in wheat doughs during the processes of mixing and baking, contributing to the structure of the gluten network. The relative contributions of tyrosine bonds and disulfide--sulfhydryl interchange are discussed.     

Interactions of Genotype and Glutenin Subunit Composition on Breadmaking Quality of Durum 1AS•1AL‐1DL Translocation Lines

Dual‐purpose durum (Triticum turgidum L. subsp. durum) wheat, having both good pasta and breadmaking quality, would be an advantage in the market. In this study, we evaluated the effects of genotype and varying HMW and LMW glutenin subunit composition on durum breadmaking quality. Genotypes included five near‐isogenic backgrounds that also differed by variability at the Glu‐D1d (HMW subunits 1Dx5+1Dy10), Glu‐B1 (presence or absence of subunit 1By8), and Glu‐B3 (LMWI or LMWII pattern) loci. Quality tests were conducted on genotypes grown at five North Dakota locations. Genotype had a stronger influence on free asparagine content than glutenin subunit composition. Genotypes carrying Glu‐D1d had higher glutenin content than lines that did not carry Glu‐D1d. Among Rugby translocation genotypes, lines carrying LMWI had higher gliadin content and better loaf volume than genotypes carrying LMWII. Absence of 1By8 produced major reductions in loaf volume in nontranslocation lines regardless of whether LMWI or LMWII was present. In contrast, the presence of Glu‐D1d compensated well for the absence of 1By8 regardless of which LMW pattern was present. The durum genotypes did not have loaf volumes equal to bread wheat cultivars, and results suggest that improved extensibility is needed to improve durum breadmaking quality.