Enhancement of the biological resistance of wood by phenylboronic acid treatment

Phenylboronic acid (PBA) was tested in terms of boron leachability from treated wood. In addition, the fungal and termiticidal efficacy of PBA-impregnated sugi (Cryptomeria japonica D. Don) wood was tested against the decay fungi Coriolus versicolor (L. ex Fr.) Quel. and Tyromyces palustris (Berk. et Curt) Murr., representing white-rot and brown-rot fungi, respectively, and the Formosan subterranean termite Coptotermes formosanus Shiraki. Ion chromatography analysis of hot water extracts of treated wood before and after leaching indicated that PBA is considerably resistant to water leaching, and saturation of the treatment solution increased the fixation ratio of boron in wood, whereas boric acid could not remain in wood impregnated even with the saturated solution. Decay test results revealed the excellent bioactive performance of PBA. Wood treated with 0.34% PBA solution was found resistant to both decay fungi, even after running-water leaching for 10 days and treatment with 1.00% PBA completely inactivated the Formosan subterranean termite for the leached specimens. Weight gain levels were 0.18% w/w (0.46kg/m³) and 0.99% w/w (2.49kg/m³) for these concentration levels, respectively, after being leached by running water. Contrary to the general belief that boron is a slow-acting toxicant against termites and unable to prevent mass loss of treated wood, PBA acted rapidly, and the mass loss caused by termites was low.This study was presented in part at the 47th annual meeting of the Japan Wood Research Society, Kochi, April, 1997     

Behavioral responses of the arboreal termite Nasutitermes corniger (Isoptera: Termitidae) to wood extracts

The termite Nasutitermes corniger is attracted to weathered wood, but it is not known whether this attraction is of chemical or physical nature. This work examines whether wood extracts can change the attraction of N. corniger to a food substrate. In a first experiment, filter paper impregnated with a eucalyptus extract, Eucalyptus grandis, and another one with a solvent were placed in the foraging arena of N. corniger nests under laboratory conditions. The extracts used were from weathered or unweathered wood. During the second experiment, two tests were performed using eucalyptus wood. First, a piece of unweathered wood was impregnated with an extract of weathered wood (treatment) or solvent (control). In the second test, a piece of weathered wood was impregnated with an extract of unweathered wood (treatment) and another one with solvent (control). At the end of the tests, the number of termite recruitment on each substrate was quantified. Filter paper recruited more termites when treated with unweathered wood extracts or with extracts of weathered wood than when impregnated with the solvent. Unweathered wood treated with extracts of weathered wood recruited more termites than the control. However, weathered wood impregnated with extracts of unweathered wood recruited similar numbers of termites as the same wood impregnated with the solvent. It was verified that chemicals from weathered or unweathered wood increased the foraging activity of N. corniger in neutral substrates, but only chemicals from weathered wood altered the attraction of N. corniger to eucalyptus wood.     

Laboratory evaluation of the termiticidal efficacy of copper HDO

A laboratory no-choice termite bioassay was conducted to evaluate the ability of copper HDO (CX-A or copper xyligen) to protect radiata pine (Pinus radiata D. Don) wood samples from attack by two subterranean termite species, Reticulitermes speratus and Coptotermes formosanus. A series of sapwood samples were pressure treated with either 0.25%, 0.50%, 0.75%, or 1.00% copper HDO solution. Samples treated with equivalent concentrations of a benchmark preservative, CCA-C, were used as treated controls. All samples (including controls) were subjected to an artificial weathering schedule before the bioassay. The samples were exposed to 30-day R. speratus tests and 3-week C. formosanus tests. Copper HDO was shown to deter termites from significant feeding on the treated wood. At a retention of 5.8 kg/m3 (treated with 0.75% solution) or higher, the mass loss from termite feeding did not exceed 3% for both the 30-day R. speratus tests and the 3-week C. formosanus tests. At each of the retentions tested, copper HDO performed comparably with equivalent retentions of CCA-C; however, field data are needed to validate these laboratory results. The preliminary findings are that copper HDO pressure treatment has potential as a viable method of protecting wood from attack by both termite species tested.     

Leachability,decay, and termite resistance of wood treated with metaborates

The formation of insoluble metaborates in wood was investigated by impregnating the wood with borax and metallic salts, after which their properties (e.g., leachability in running water and biological resistance) were evaluated. The solubility of three metaborates in acidic solutions was also evaluated. Double-diffusion treatment was carried out to form the precipitates of metaborates in sapwood specimens of Japanese cedar (Cryptomeria japonica) at room temperature. Water-saturated wood specimens were first impregnated by a saturated borax solution and then diffuse-penetrated with Zn²⁺, Ca²⁺, or Pb²⁺ solution. The precipitates of the three metaborates in the wood proved to be insoluble or hardly soluble in water by the leaching test. With the decay test using a brown-rot fungus (Fomitopsis palustris) and a white-rot fungus (Trametes versicolor) and with the termite test using a virulent subterranean termite (Coptotermes formosanus), the metaborate-treated woods showed generally good decay and termite resistance with negligible mass loss of the specimens. Particularly, the lead metaborate formed in the wood provided superb biological resistance against decay and termite attacks. In addition, the precipitates of these metaborates were found to be soluble in acidic solution, suggesting a way to remove these chemicals from wood when disposing of waste materials.     

Variation in the natural termite resistance of teak (Tectona grandis Linn. fil.) wood as a function of tree age

? Tree age is one of the most important factors to affect the natural durability of wood.

? The purpose of this study was to determine the natural termite resistance of heartwood and sapwood of teak (Tectona grandis Linn. fil.) for trees aged 8, 30 and 51 years. Reticulitermes speratus Kolbe was employed as a test termite using a no-choice feeding method.

? The heartwood and sapwood of all of the trees tested exhibited antitermitic activity. Based on the mean mass loss due to termite activity, the sapwood and heartwood regions of 8-year-old trees are the most susceptible to termites while the heartwood regions of the 30-year-old trees showed termite resistance similar to the termite resistance of 51-year-old trees.

? The mass loss is moderately correlated with n-hexane extractive content, total extractive content, brightness and redness of the wood.

     

Termite resistance and color of heartwood of hinoki (Chamaecyparis obtusa) trees in 5 half-sib families in a progeny test stand in Kyushu, Japan

Hinoki (Chamaecyparis obtusa) wood has been used as a structural material in Japan because of its superior mechanical properties, its excellent durability and the beautiful color of its heartwood. Variations of termite resistance and compositions of extractives among hinoki trees have been reported. However, genetic variation of termite resistance and the effect of heartwood color on termite resistance remain unknown. In this study, we report the characteristics of termite resistance and color indexes (L*, a* and b*) of heartwood of hinoki half-sib families in a progeny test stand. The survival days of termites and the mass loss of samples of hinoki heartwood differed significantly among hinoki families. Families with red-color heartwood had larger termite resistance than families with yellow-color heartwood. The termite resistances of individual samples from two families with yellow-color heartwood were as small as that of Pinus densiflora. Larger a* and smaller b* induced larger termite resistance of heartwood. The effect of DBH (diameter at breast height) of hinoki trees on termite resistance of hinoki families was small.     

Studies on the control of subterranean termites by inorganic pesticides

Studies on the wood preserving techniques against subterranean termites have been undertaken with a view to promote the use of inorganic indigenous pesticides in our country. The thin films of gelatine solution (glue of animal hides) containing 10% calcium carbonate or 5% copper sulphate as well as sodium silicate solution containing 12% calcium carbonate +10% zinc oxide coated separately on wooden stakes prevented termite attack in soil up to 2, 4 and 5 years, respectively. Whereas control wooden stakes were found to be severely damaged by termites within 6 months. Stakes coated with Solignum^®-white used as standard wood preservative for comparison remained free from termite infestation for a period of 5 years.     

Evaluation of the concentrations of hydrogen and methane emitted by termite using a semiconductor gas sensor

A gas detection apparatus equipped with a semiconductor gas sensor was employed for qualitative and quantitative measurement of hydrogen and methane emitted by termites. A gas sample of 2.5 ml was injected into the semiconductor gas sensor through the gas detection apparatus, and the maximum voltage of the sensor was converted into gas concentration. The gas samples were collected from three distinct experiments: (1) five combinations of workers and soldiers of Coptotermes formosanus with and without a wood specimen; (2) C. formosanus under six temperature conditions; and (3) four different termite species, C. formosanus, Reticulitermes speratus, Incisitermes minor, and Zootermopsis nevadensis. The hydrogen and methane concentrations increased with an increase in the number of termites. Concentrations were higher in samples with a wood specimen than without it. Both hydrogen and methane concentrations were the highest for the samples at 35 °C and were lowest at 15 and 5 °C. The concentrations were very low at 45 °C because all the termites had died in a few hours. The concentrations of hydrogen and methane were highest for Z. nevadensis, the dampwood termite, among the four species, and no methane was detected for I. minor, the drywood termite, at 28 °C and 75 % RH.     

Termite resistance of beech wood treated with zinc oxide and zinc borate nanocompounds*

The field of wood protection is currently changing due to the restrictions imposed by the Biocidal Products Regulation. The need for development of new wood protection technologies is therefore growing. In this work, the resistance of European beech (Fagus sylvatica L.) wood impregnated with nano-dispersions of zinc oxide (nano-ZnO) and zinc borate (nano-ZnB) against the termite Reticulitermes grassei Clement was investigated. Three different concentrations (0.5%, 1%, 2%) of the nanocompounds were tested. The effects of water leaching were also investigated. A severe effect in terms of termite workers mortality was induced by both dispersions, even at the lowest concentration. In terms of termite feeding, nano-ZnO dispersions appeared to be more efficient than nano-ZnB as they induced significant improvement at concentrations as low as 0.5%. Nano-ZnB was applied at 1% or higher concentrations in order to impart similar changes. Nano-ZnB dispersions were efficient in terms of termite resistance for a concentration at least 1%. Further increasing concentration to 2% resulted in a respective increase of wood efficacy against termites. For both tested nanocompounds, water leaching did not result in any significant increase of termite feeding.     

Effect of an oil heat treatment on the teachability and biological resistance of boric acid impregnated wood

Vegetable oils provide boron retention of about 30% of initial amount depending on oil drying properties. Linseed oil is the most efficient, followed by soybean oil and rapeseed oil. Durability of C. japonica and F. crenata wood specimens has been enhanced by application of linseed oil alone but not enough to reduce termite’s attack of Coptotermes formosanus. Treating wood with a 1.0% w/w boric acid solution prior to oil treatment protects C. japonica from termite and fungi degradations. Efficiency against termites is mainly due to boron retention by oil but hydrophobic oil also forms a barrier decreasing fungi penetration. Boron efficacy threshold around 0.7 kg/m³BAE, lower than classical boron treatments thresholds indicates that oil water-repellence reinforces boron biostatic effect.     

Silicic acid: boric acid complexes as wood preservatives

Wood was treated with a low molecular-weight silicic acid: boric acid agent and examined for increased resistance to termites and combustion. Wood treated with silicic acid only exhibited increased termite resistance, but not to the marked extent observed after treatment with a mixture of silicic and boric acids. Increasing the quantity of boric acid also increased the termite mortality rate and shortened the time to death. Oral-toxicity tests using dyed silicic acid: boric acid suggested that the boric acid in the agent acted as a stomach poison. Field tests on stakes over three years showed that even if stakes were placed near the termite exit, those treated with silicic acid and high levels of boric acid had no attack by termites and maintained their original form. Though these specimens were installed in the field during three rainy seasons (about six months in total) in three years, the termite resistance ability of these chemicals was maintained. It became clear that this silicic acid: boric acid agent has a high water resistance ability worthy of application in the outdoors. Combustion tests showed that flame and glowing combustion times were shortened at high levels of boric acid. When a boric acid: methanol solution was added at of rate of not less than 25 ml for 100 g of colloidal silicic acid solution (CSAS), flaming and glowing combustion were not observed. Although the charring length of the wood specimen which was treated with a low molecular weight silicic acid: boric acid agent decreased to 2/3 of that of the control wood, the charring lengths were not influenced by the level of boric acid. However, the volume of smoke decreased relative to the amount of boric acid that had been added.     

Details of the digestive system in the midgut of Coptotermes formosanus Shiraki

Wood-feeding termites have evolved an efficient cellulose-decomposing system. The termite has two independent cellulose-digesting systems: one in the midgut and the other in the hindgut. Because the digestion system in the midgut should be the sole source of soluble sugars for the host termite, the details of the decomposition of wood particles in the midgut were clarified in one of the most common pest species, Coptotermes formosanus. The spatial distribution of cellulase in the midgut was found by immunohistochemistry, and the amount of endogenous cellulases and the volume of the endoperitrophic space were determined. The size of wood particles in the foregut and the midgut were compared. The results showed that one of the characteristics of wood degradation by termites is the mechanical grinding of food by the mandibles and the cuticular apparatus of the foregut. This process greatly increases the surface area of the substrates. Extremely high concentrations of cellulase attack the ground-up wood in the midgut, and the glucose produced is removed quickly through the peritrophic membrane.     

Changes of decay and termite durabilities of Japanese larch (Larix leptolepis) wood due to high-temperature kiln drying processes

We investigated the effects of high-temperature drying schedules (120°–130°C) on decay and termite feeding of Japanese larch timbers. Thermogravimetric analysis was conducted to investigate changes of the wood components. Decay and termite feeding tests showed that specimens dried under high-temperature schedules were susceptible against a decaying fungus Fomitopsis palustris and attacks from termites Coptotermes formosanus and Reticulitermes speratus. These drying schedules changed chemical components, which were suggested by the thermal analytical result compared to the control sample. The results of this study indicated that the acceleration of termite feeding takes place even under temperatures that are comparatively lower than that used in our previous research in which 170°C steaming treatment was applied to Japanese larch wood. Decay durability against a brown rot fungus also decreased, possibly from production of low molecular weight fragments when hemicellulose decreased during the high-temperature drying processes.     

Termite resistance of DMDHEU-treated wood

Four field trials were conducted with wood modified with dimethyloldihydroxy-ethyleneurea (DMDHEU) in contact with subterranean termites. Trials 1 to 3 were conducted with Coptotermes acinaciformis (Froggatt); 1 and 2 in south-east Queensland, and 3 in northern Queensland, Australia. Trial 4 was conducted in northern Queensland with Mastotermes darwiniensis (Froggatt). Four timber species (Scots pine, beech, Slash pine and Spotted gum) and two levels (1.3 M and 2.3 M) of DMDHEU were used. The tests were validated. DMDHEU successfully prevented damage by C. acinaciformis in south-east Queensland, but not in northern Queensland. It also did not protect the wood against M. darwiniensis. Except for beech in trial 4, DMDHEU led to reduced mass losses caused by termite attack compared to the unmodified feeder stakes. Slash pine (in trials 1 and 3) and Spotted gum (in trial 1) presented low mass losses. Modification of Scots pine was more effective against termite damage than the modification of beech.     

MALDI-TOF, HPLC-ESI-TOF and 13C-NMR characterization of chestnut (Castanea sativa) shell tannins for wood adhesives

MALDI-TOF, HPLC-ESI-TOF and 13C-NMR techniques were used to analyse the structure of non-purified aqueous chestnut shell tannin extracts. In addition, the influence of the extraction agent (water or aqueous solutions of Na₂SO₃ and/or NaOH) on tannin structure was analysed by MALDI-TOF in order to select the extract with the best properties for wood adhesives. Using HPLC-ESI-TOF, catechin/epicatechin, gallocatechin/epigallocatechin, dicatechin structures, dicatechin structures without a hydroxyl group, galloyl-glucoses and ellagic acid were identified as the main monomeric components in the aqueous extract. 13C-NMR and MALDI-TOF spectra revealed that extracts are mostly composed of procyanidin and prodelphinidin structures although prorobinetidins might be also present. MALDI-TOF spectrometry was used to identify the extract oligomeric components. Extractions with Na₂SO₃ and/or NaOH produced changes in the predominant structures in the extracts and on the amount of sugar units linked to the flavonoid structures, which decreased in the presence of Na₂SO₃. Extract obtained using low Na₂SO₃ and NaOH concentrations (1.5 and 0.75 %, respectively) was selected as more suitable for wood adhesive preparation.     

樟子松热处理材耐久性能的评价

对樟子松热处理材进行室内防霉、防蚁蛀及野外埋地检测,综合评价其耐久性能。结果表明:樟子松热处理材对霉菌、变色菌均无防治效力,不抗白蚁蛀蚀;樟子松热处理材的耐久年限约为3年。     

Distribution of boron in wood treated with aqueous and methanolic boric acid solutions

The distributions of boron in Japanese cedar (Cryptomeria japonica D. Don) sapwood blocks treated with aqueous or methanolic boric acid [B(OH)₃] solutions were explored through Raman spectroscopy and prompt gamma-ray analysis (PGA). B(OH)₃ was the sole boron species observed in Raman spectra of the wood blocks treated with either solution. Plots of weight gain of the treated wood blocks versus boron concentration in treatment solutions were found to be linear. The results indicated that the methanolic solution makes it possible to impregnate wood with much larger amounts of boron than the aqueous solution. PGA confirmed that B(OH)₃ was highly enriched near the end grains of the treated wood blocks. Raman measurements suggested that boron content in the bulk of the wood block is not as large as expected from the weight gain of the treated wood blocks when an ordinary air-drying method is used. It was concluded that the aqueous solution impregnates the cell walls of wood with boron more easily than the methanolic solution. Part of this report was presented at the 55th (Kyoto, March 2005) and 56th (Akita, August 2006) Annual Meetings of the Japan Wood Research Society. This article follows the previous rapid communication “Analysis of boron in wood treated with boric acid solutions using Doppler broadening method of prompt gamma-rays.” J Wood Sci (2006) 52:279–281     

Assessment of technologies and dogs for detecting insect pests in timber and forest products

Abstract

Lack of accurate tools for detecting insect infestation in timber remains a big challenge for pest management authorities. Seven non-destructive insect detection technologies were used to assess their effectiveness in detecting insect borers and termites in timber samples. These technologies were: Termatrac®; Tramex Moisture tester; Acoustic Emission Device (AED-200L®); X-ray, thermal imaging camera; a termite detector dog; and trained quarantine inspectors using standard visual inspection (VI). The timber samples of Acacia parramattensis and Acacia decurrens used for the trial were naturally infested timber branches; timber blocks inoculated with lyctine beetles; timber blocks naturally infested with termites; and un-infested controls. All timber samples used were destructively sampled at the end of the trial to confirm the presence or absence of insects. The detector dog was 100% effective in detecting natural infested termite colonies but was totally ineffective in detecting termites on artificially inoculated timber blocks. The moisture metre and the thermal image camera were 100% effective in detecting large termite colonies but ineffective in detecting other insects in dry timber samples. The effectiveness of other methods of detecting insects or termites varied considerably. The AED was 79% effective, Termatrac 70%, X-ray 40% and VI 35%. Implications of these findings for quarantine and inspection purposes are discussed.     

Toxicity and antitermite activity of the essential oils from Cinnamomum camphora, Cymbopogon nardus, Melaleuca cajuputi and Dipterocarpus sp. against Coptotermes curvignathus

Efficacy of four different essential oils against the subterranean termite, Coptotermes curvignathus Holmgren, was assessed in various bioassays. Laboratory results indicate that the highest termite mortality was found in Dipterocarpus sp. essential oil after 24 h (LC₅₀ = 1.62 %) and the lowest in Melaleuca cajuputi (LC₅₀ = 4.60 %). The wood consumption in the filter paper treated with Dipterocarpus sp. oil is also smaller than for the other three essential oils tested. However, the other three essential oils also inhibited termite susceptibility of the specimens. Dipterocarpus sp. (keruing oil) was the most effective insect antifeedant and repellent against C. curvignathus. The results suggest that essential oils might have some beneficial activity of economic value and are considered good candidates for the development of new chemicals (repellents or antifeedants) for termite control.     

Assemblages and species diversity of wood destroying termites in different land use systems in Western Ghat, India

Spatial distribution, abundance and assemblage of termites depend mainly on the local conditions and habitats in which they thrive. Striking differences are observed in the species richness, number of clades and functional diversity of termite assemblage between different habitats. This study aim was to examine effect of human interference in the diversity of wood destroying termite in forest areas as well as managed and unmanaged plantations in South India. Termites attacking trees and wooden logs were collected from forest areas, managed plantations and unmanaged plantations. The termites collected were identified and compared for species abundance, richness and species diversity. Results show that the species composition and species diversity of the wood destroying termites vary according to the conditions. The species diversity measures revealed that there is a significance variation among the forest fauna and plantations. The forest areas have the highest species composition compared to plantations. Species richness is high forest areas. Even though the abundance of termites are more in unmanaged plantations, there is no significant difference related to species diversity among the managed and unmanaged plantations.