Resources and bioactive substances from Taiwania (<Emphasis Type="Italic">Taiwania cryptomerioides</Emphasis>)

 Taiwania (Taiwania cryptomerioides Hayata), native to Taiwan, is one of the most economically important tree species grown there. In this article we summarize the current results of phytochemistry and bioactivity of Taiwania extracts, including antifungal, antitermite, antibacterial, and antimite activities as well as cytotoxicity against three tumor cells. The resources of Taiwania are also addressed. Received: January 23, 2002 / Accepted: March 8, 2002 Acknowledgment The authors thank the National Science Council of R.O.C. for financial support (NSC-90-2313-B-002-344). Correspondence to:S.-T. Chang     

Effects of thinning and pruning on knots and lumber recovery of Taiwania (<Emphasis Type="Italic">Taiwania cryptomerioides</Emphasis>) planted in the Lu-Kuei area

This study investigated the effects of various thinning and pruning methods on the knots (number and size) and lumber recovery from Taiwania (Taiwania cryptomerioides Hay.) plantation trees. The results showed that heavy thinning caused more knots and larger-diameter knots than medium or no thinning; moreover, pruning caused fewer numbers of knots and smaller-diameter knots than no pruning. Better-quality Taiwania trees occurred with the no-thinning/no-pruning treatments, as shown by analyzing the knots, although the results also showed that the healing process seemed to have produced not completely clear wood during the 9 years after the pruning treatment. The thinning intensity slightly enhanced the lumber recovery of logs. Pruning did not affect lumber recovery from taiwania trees and logs. Thinning increased the lumber recovery per tree due to an increase in the diameter at breast height.     

Influence of steam heating on the properties of pine (<Emphasis Type="Italic">Pinus pinaster</Emphasis>) and eucalypt (<Emphasis Type="Italic">Eucalyptus globulus</Emphasis>) wood

Heat treatment of Pinus pinaster and Eucalyptus globulus woods, two important species in Portugal, was performed in the absence of air by steaming, inside an autoclave, for 2–12 h at 190–210°C. Mass losses increased with treatment time and temperature reaching 7.3% for pine and 14.5% for eucalypt wood. The wood behaviour with moisture was improved. The equilibrium moisture content decreased by 46% for pine and 61% for eucalypt, the dimensional stability increased (maximum anti-shrinking efficiency in the radial direction of 57 and 90% for pine and eucalypt, respectively) and the surface wettability was lowered. In relation to mechanical properties, the modulus of elasticity was little affected (maximum decrease of 5% for pine and 15% for eucalypt) but the bending strength was reduced (by 40% at 8% mass loss for pine and 50% at 9% mass loss for eucalypt wood). The variation of properties was related to treatment intensity and mass loss but significant improvements could already be obtained for a 3–4% mass loss without impairing the mechanical resistance. The response of eucalypt was higher than that of pinewood. Heat treatment of eucalypt wood shows an interesting potential to improve the wood quality for solid timber products.     

Compressive strength of young Taiwania (Taiwania cryptomerioides) trees grown with different thinning and pruning treatments

Taiwania (Taiwania cryptomerioides Hay) is an important timber species in Taiwan. Growth in generally improved trees under intense silvicultural practice is so rapid that rotations or the practice of thinning trees may be as short as 20–30 years. Thus, the wood properties of young plantation trees need to be characterized to effectively use this resource. The effects of different thinning and pruning methods on the compressive strength parallel to grain of young Taiwania trees were explored. Average compressive strengths with various thinning treatments revealed the trend of no thinning > medium thinning > heavy thinning and in the pruning treatments showed the trend of medium pruning > no pruning > heavy pruning. However, most results showed no statistically significant differences among thinning and pruning treatments.     

Application of the drilling resistance method for annual ring characteristics: evaluation of Taiwania (<Emphasis Type="Italic">Taiwania cryptomerioides</Emphasis>) trees grown with different thinning and pruning treatments

 The effects of various thinning and pruning methods on the density profile and annual ring characteristics of Taiwania (Taiwania cryptomerioides Hay.) using the drilling resistance technique were investigated. The results showed that thinning caused wider annual rings than medium thinning or no thinning, and pruning caused narrower annual rings than no pruning. Moreover, the thinning treatment affected annual rings more effectively than the pruning treatment. The average ring density after the thinning treatments showed a trend as follows: no thinning > medium > heavy. This indicates that thinning reduces the average ring density. The average ring density after the pruning treatments showed a trend as follows: medium > no pruning > heavy. However, the differences between thinning and no thinning were not statistically significant. The percentage of latewood in Taiwania after these three thinning and pruning treatments are shown. The results with silvicultural treatments have the order: medium > not treated > heavy, but there are no statistically significant differences among thinning, pruning, and thinning where pruning interactions were observed. Moreover, there were highly significant negative relations between the average ring width and the various ring densities for Taiwania, but the determination coefficients were small. In addition, there was a highly positively significant relation between the latewood percentage and latewood width. Received: November 22, 2001 / Accepted: May 21, 2002 Acknowledgments The authors thank the National Science Council of ROC for financial support through grant NSC-90-2313-B-002-338, and the Taiwan Forestry Research Institute for their contribution (210). Correspondence to:C.-J. Lin     

Dynamics of non-structural carbohydrate reserves in pruned <Emphasis Type="Italic">Erythrina poeppigiana</Emphasis> and <Emphasis Type="Italic">Gliricidia sepium</Emphasis> trees

In alley cropping systems, fast growing leguminous trees are pruned to reduce competition with crops for light and to provide organic inputs for crop nutrition. Tree regrowth depends on non-structural carbohydrate reserves in the remaining tree parts. In this study, the dynamics of starch and soluble carbohydrates in roots and stems of completely pruned (all shoots removed), partially pruned (one branch retained on the pruned stump) and unpruned Erythrina poeppigiana (Walp.) O.F. Cook and Gliricidia sepium (Jacq.) Kunth ex Walp. trees were studied under humid tropical conditions in Turrialba, Costa Rica. Measurements on starch and soluble carbohydrates in roots and stems were made at 0, 2, 6 and 12 weeks after pruning during both a “rainy” and a “dry” season. In general, the dynamics of non-structural carbohydrates in roots and stems of pruned E. poeppigiana and G. sepium trees were similar. Starch concentration was highest in unpruned trees and higher in roots than in stems of pruned trees. The effect of pruning intensity was first observed in stems, and starch reserves were more depleted in stems than in roots, an effect more evident during the “dry” season. The critical tree regrowth stage for starch mobilisation was that of vigorous sprout development at six or four weeks after pruning particularly in completely pruned trees. At this time, fine root biomass and length and nodule biomass in pruned trees decreased. Survival of fine roots and nodules was greater in partially pruned than in completely pruned trees. Starch accumulation in roots recommenced at 12 weeks after pruning in G. sepium, and later than 12 weeks after pruning in E. poeppigiana roots. This study showed that E. poeppigiana responded better to pruning regimes than G. sepium. Recovery of trees after pruning is better when trees are partially pruned than when completely pruned.     

Agrobacterium-mediated genetic transformation of Camptotheca acuminata

UGPase gene related with wood cellulose synthesis was transferred into C. acuminata using the method of Agrobacte- rium-mediated genetic transformation, and an efficient transformation system was developed for C. acuminata on the basis of evaluations of several factors affecting Agrobacterium-mediated DNA transfer rate. The highest transformation rate was achieved when pre-cultttred leaf explants were infected with an Agrobacterium culture corresponding to OD600 （0.5） for 10 min, and cultured on explant regeneration medium for three days. The results of Southern hybridization showed that genomic DNA of the kanamycin-resistant shoots to an UGPase gene probe substantiated the integration of the transgene. Transformation efficiency （6%） was achieved under the optimized transformation procedure, This system should facilitate the introduction of important useful genes into C, acuminata.     

The impact of shade on morphology,growth and biomass allocation in <Emphasis Type="Italic">Picea sitchensis</Emphasis>, <Emphasis Type="Italic">Larix</Emphasis> × <Emphasis Type="Italic">eurolepis</Emphasis> and <Emphasis Type="Italic">Thuja plicata</Emphasis>

To determine the effect of shade on morphology, growth and biomass allocation in Picea sitchensis, Larix × eurolepis and Thuja plicata, seedlings were grown in the open or under shadehouses providing 25%, 50% and 75% reductions of full-light for two growing seasons. For most of the characteristics assessed there was no significant interaction between species and shade indicating that the morphological responses to changing shade treatments were not species-dependent. After two growing seasons the mean height increment for the three species was significantly greater in 25% (76.1 cm) and 50% shade (74.9 cm) than in the open (69.5 cm). Root collar diameter increment, shoot, root and total biomass declined significantly with increasing shade while the opposite was true for the height:diameter ratio. In both western red cedar and hybrid larch the shoot:root ratio was significantly greater in the shade while in Sitka spruce this characteristic was not influenced by shade. While all species had significantly greater specific shoot areas in 75% shade than in 0% shade, this trend was particularly pronounced in hybrid larch. In hybrid larch and western red cedar, the normalised specific projected shoot area increased significantly with increasing shade. The opposite trend was observed for Sitka spruce. We conclude that in the main the species studied demonstrated similar shade acclimation responses despite their reported differences in shade tolerance.     

Crystalline structure of heat-treated Scots pine [<Emphasis Type="Italic">Pinus sylvestris</Emphasis> L.] and Uludağ fir [<Emphasis Type="Italic">Abies nordmanniana</Emphasis> (Stev.) subsp. <Emphasis Type="Italic">bornmuelleriana</Emphasis> (Mattf.)] wood

The aim of this study was to determine changes in crystallinity and crystalline unit cell type of heat-treated Scots pine (Pinus sylvestris L.) and Uludağ fir (Abies nordmanniana stev. subsp. bornmuelleriana Mattf.) wood samples by means of FT-IR spectroscopic method. Heat treatment was applied on the test samples in an oven at three different temperatures (120, 150, and 180°C) and for two different periods of time (6 and 10 h) under atmospheric pressure. It was designated that crystallinity of both Scots pine and Uludağ fir wood samples increased during heat treatment depending on the duration. However, monoclinic structure in crystalline unit cells of Scots pine and Uludağ fir wood samples converted to triclinic structure when heat treated. It was estimated that monoclinic structure was dominant in the crystalline unit cell. It was established that the crystalline structure of Scots pine wood samples was more affected by heat treatment than that of Uludağ fir wood samples.     

Problems of using pines in <Emphasis Type="Italic">Tuber melanosporum</Emphasis> culture: soils and truffle harvest associated with <Emphasis Type="Italic">Pinus nigra</Emphasis> and <Emphasis Type="Italic">P. sylvestris</Emphasis>

In Mediterranean pine forests, truffles and mushrooms generate greater profits than any other woodland products. However, there are no studies on Tuber melanosporum Vittad. associated with pines. For this reason, we have carried out a study of this truffle in mountain woods with Pinus sylvestris L. and P. nigra Arnold subsp. salzmannii (Dunal) Franco, in central Spain. Two hundred and eight Tuber melanosporum burns were monitored for 7 years in five different habitats within the same geographical area. An ANOVA test confirmed significant differences in carpophore production. In higher producing habitats, pines were less abundant. We also confirmed that in 433 burns, T. melanosporum was always unequivocally associated with the root base of Quercus or Corylus trees. Similarly, 14 truffle collectors confirmed that they had never found a single burn with carpophore production associated exclusively with pines. Nevertheless, soil analyses indicated that the soil of these pine woods was very favourable to Tuber melanosporum. We therefore conclude that at present Pinus nigra salzmannii and P. sylvestris are of little interest to Tuber melanosporum culture, as they hinder carpophore production. However, this study has also confirmed that Pinus nigra salzmannii and P. sylvestris mycorrhize easily with Tuber melanosporum, both in the laboratory and in natural environments. On this basis, we propose that pines may act as transmitters of T. melanosporum, although they do not induce fruiting. As a result, the commercial cultivation of Pinus nigra salzmannii and P. sylvestris seedlings mycorrhized with Tuber melanosporum is not recommended in truffle culture at the present time.     

Microwave vacuum drying characteristics of Pinus massoniana wood

Microwave-vacuum (MV) drying characteristics of plantation Masson pine (Pinus massoniana) were studied experimen-tally for various levels of microwave radiation time, initial moisture content (MC), vacuum level and wood thickness. The results show that the process of MV drying for wood can be significantly divided into a short accelerating rate drying period, a long constant rate drying period and falling rate drying period, and the second drying period can extend to levels of mean MC below the fiber satu-r...     

High-level expression of 4-coumarate:coenzyme A ligase gene Pt4CL1 of Populus tomentosa in E. coli

In order to investigate the enzymatic properties of the 4CL1 of Populus tomentosa, the recombinant expression vector pQE31-4CL1 was constructed. The recombinant was identified by three restriction endonucleases, then the vector pQE31-4CL1 was transformed into expression host M15 (pREP4) and induced by isopropyl-α-D-thiogalactoside (IPTG) to express 60 kD fused protein Pt4CL1. The biologically active Pt4CL1, expressed as soluble protein, was achieved with 0.6 mmol·L-1 IPTG induction as the ex-pression temperature declined from 37 to 28°C. The 6×His tag facilitates affinity binding to Ni2 -nitrolotriacetic acid (NTA) and enables one-step purification to acquire the molecular SDS-PAGE electrophoresis purity of the active 4CL1 protein by agarose cou-pled with Ni2 -NTA affinity chromatography. The optimal substrate for Pt4CL1 was 4-coumarate.     

忍冬和华南忍冬叶表皮扫描电镜观察及其生态适应性研究

利用扫描电镜观察了忍冬（Lonicera jàponica Thunb）和华南忍冬（Lonicera confus）叶表皮形态特征,观察指标包括：气孔器、表皮毛、表皮细胞等.结果表明：气孔仅分布在下表皮,气孔器呈无规则型散生;上表皮细胞的垂周壁呈沟槽状下陷;下表皮密被表皮毛（包括腺状毛和非腺毛）,同时还分布有瘤状的草酸钙簇晶.为进一步证明这种瘤状结构是否为草酸钙簇晶,作者发现利用Fluo-3/AM（钙离子荧光指示剂）处理的活体叶片在激光共聚焦显微镜下能够发出强烈的荧光.此外,通过电子探针对瘤状物进行分析,发现其元素组成为C、O、Ca.上述叶表皮构造特征,有利于减少植物体水分散失,还有助于植物适应富钙的石灰土,从而适应我国西南岩溶区特殊的干旱、富钙的环境.电镜观察结果表明,在忍冬叶上表皮中脉处有呈线状分布的腺状表皮毛,而华南忍冬叶上表皮则无表皮毛分布,这一微形态特征可以作为二者种间特异性差别,从而为二者的合理区分提供一定的依据.     

Nutrient element contents of cutting seedlings of hybrid species （ Liriodendron chinense x tulipifera）

The cutting seedlings ofLiriodendron chinense xtulipifera were treated with the different concentrations of auxin (treatment₁: IBA of 50 g·kg⁻¹+NAA of 300 g·kg⁻¹; treatment₂; IBA of 100 g·kg⁻¹+NAA of 300 g·kg⁻¹). The biomass nutrient element contents for different organs (root, stem, leaf) of cutting seedling ofLiriodendron chinense xtulipifera were measured by the dry method, Kjeldahl method and Atomic Absorption Spectroscopy method. The result showed that the biomass of root, stem, and leaf of the cutting seedling treated with auxin was all remarkably increased. The contents of element C in root, stem and leaf had no significant difference between the control and auxin treatments, while the contents of N, P, K and Ca in stem were much lower than that in leaf and root. Variance analysis showed that for the same organ with different concentration treatment of auxin, the four nutrient elements (N, P, K, and Ca) had no significant difference in contents, while there existed significant or very significant difference in contents of the four nutrient elements in different organs with the same concentration auxin treatment. The N, P, K and Ca contents were very low in cutting seedlings; as a result, additional fertilizer should be applied to the seedlings when they were planted in the field. Foundation item: This paper was supported by Jiangsu Province Science Foundation (BE96350). Biography: ZHANG Xiao-ping, (1972-), female, Ph. Doctor in Nanjing Forestry University. Nanjing 210037, P. R. China. Responsible editor: Zhu Hong     

Characterization of lignin-carbohydrate linkages in the residual lignins isolated from chemical pulps of spruce (<Emphasis Type="Italic">Picea abies</Emphasis>) and beech wood (<Emphasis Type="Italic">Fagus sylvatica</Emphasis>)

To investigate the linkage types between carbohydrates and lignin, residual lignins were isolated from three different unbleached pulps [kraft, alkaline sulfite anthraquinone methanol (ASAM), and soda with anthraquinone (AQ) and methanol] of spruce and beech wood and then characterized by oxidation with 2,3-Dichloro-5,6-dicyanobenzoquinone and followed by Prehm’s methylation. In residual lignins, sugar moieties were bound to lignins via benzyl ether bonds. In particular, galactose and mannose are predominantly linked to lignin fragments in residual lignins of spruce wood, while xylose and galactose are favored in the formation of LC bonds in the residual lignins of beech wood. In the case of hexoses, primary hydroxyl groups (C6 position) preferentially take part in benzyl ether linkages. Hydroxyl groups in the C2 and C3 positions of xylose participate in LC bonds and a small portion of arabinose was notably connected to lignin via the C5 position. Approximately seven or eight sugars were connected in soda/AQ/methanol residual lignin per 100 C9 lignin units, while the frequencies of LC bonds in kraft and ASAM residual lignins were distinctively less at one to three sugars per 100 C9 lignin units. The publication of this article was made possible by an Emachu Research Fund. The authors are grateful for the fund.     

Testing of selected South African <Emphasis Type="Italic">Pinus</Emphasis> hybrids and families for tolerance to the pitch canker pathogen, <Emphasis Type="Italic">Fusarium circinatum</Emphasis>

Plantations of Pinus spp. constitute approximately 50% of the South African forestry industry. The first aim of this study was to develop a reliable inoculation technique to screen Pinus spp., for tolerance to infection by F. circinatum, which threatens pine forestry in South Africa. Inoculation of branches was compared with stem inoculations and we considered the number of branches or trees required to obtain statistically significant results. Furthermore, variation in the susceptibility of some Pinus families, clones and hybrids was considered. Results showed that branch inoculations were closely correlated with those from stem inoculations, and that it is important to consider branch and stem diameters when assessing susceptibility of trees. Subsequent trials using branch inoculations showed significant differences in F. circinatum tolerance amongst a range of pine species and hybrids of potential interest to forestry in South Africa. Significant differences in susceptibility were also found among clones of two P. radiata families. The most tolerant trees were P. elliottii × caribaea and P. patula × oocarpa hybrids, while the most susceptible species were P. patula, P. greggii and hybrids of these two. This is the first trial considering the susceptibility of Pinus hybrids, Pinus clones and some P. patula provenances, and the results indicate excellent potential for breeding for tolerance to pitch canker in South Africa. Application The accurate selection of disease tolerant planting stock for the South African forestry industry is crucially important for the continued sustainability of this important industry. The work described here provides valuable information on an artificial inoculation technique that will assist the industry in screening trees for tolerance to the pitch canker fungus, F. circinatum. It also provides some indication of the relative susceptibility of a number of Pinus spp., hybrids and families currently being evaluated in the country.     

Temperature-dependent development of <Emphasis Type="Italic">Diglyphus isaea</Emphasis> (Hymenoptera: Eulophidae) on <Emphasis Type="Italic">Liriomyza sativae</Emphasis> (Diptera: Agromyzidae) on cucumber

The development of Diglyphus isaea (Walker), a parasitoid of leafminers, was studied under laboratory conditions at seven constant temperatures (10, 15, 20, 25, 30, 35, and 40°C) on Liriomyza sativae Blanchard reared on cucumber (Cucumis sativus L.). The total development period (oviposition to adult emergence) decreased with increasing temperature between 15 and 35°C. In 10 and 40°C no development rate was found in D. isaea, so that it may be claimed that these temperatures fall outside the temperature range for development. Linear regression was used to describe the relationship between development rate and temperature. For egg to adult development, males of D. isaea required 153.8 degree-days (DD) above the theoretical threshold of 9.2°C and females required 161.3 DD above 9.4°C. Data were fitted to four nonlinear temperature-dependent models. Evaluation of the models took place based on the following criteria: fit to data, number and biological value of the fitted coefficient, and accuracy on the estimation of the thresholds. It could be concluded that the Briere-1 and Briere-2 models are suitable for estimating the minimum, maximum and optimal temperature thresholds of D. isaea. Thermal requirements and temperature thresholds can be used to predict the occurrence, number of generations and population dynamics of D. isaea.     

Effects of deer browsing on the survival and growth of <Emphasis Type="Italic">Abies homolepis</Emphasis> and <Emphasis Type="Italic">Picea jezoensis</Emphasis> var. <Emphasis Type="Italic">hondoensis</Emphasis> seedlings after fencing on Mt. Ohdaigahara

We evaluated the survival and growth of Abies homolepis and Picea jezoensis var. hondoensis seedlings on Mt. Ohdaigahara, where the population of sika deer (Cervus nippon) is high and an experimental fence has been in place for 13 years. No significant differences were detected in the survival of small seedlings between fenced and unfenced plots. The growth of A. homolepis was significantly higher in the fenced plot, but growth of P. jezoensis var. hondoensis did not show significant differences between fenced and unfenced plots. Seedlings of height ≤5 cm in the forest floor vegetation of the unfenced plot were probably too small for deer to find and browse, so they survived.     

Evaluation of <Emphasis Type="Italic">Serangium parcesetosum</Emphasis> (Col.: Coccinellidae) for biological control of <Emphasis Type="Italic">Bemisia tabaci</Emphasis> under greenhouse conditions

The cotton whitefly, Bemisia tabaci (Genn.) (Hom., Aleyrodidae) is increasingly a very important pest on many vegetables, field crops and ornamental plants. Therefore, controlling of this pest is still needed especially under glasshouse conditions. The specialist whiteflies’ predator, Serangium parcesetosum Sicard (Col., Coccinellidae) appears to have a great potential for the cotton whitefly control. In this study, the dynamic changes in B. tabaci populations in glasshouse cabins in response to S. parcesetosum were monitored. B. tabaci were introduced to cotton plants in three cabins in average of 50 adults per plant. One and two weeks later, adult females and males of S. parcesetosum were introduced at a rate of one female and one male per plant in the first and second cabins, respectively. The third cabin was considered as a control. The results showed that the mean number of whiteflies in the control cabin was found significantly higher than that of either when S. parcesetosum was introduced 1 or 2 weeks after the infestation with the whitefly. Also, the mean number of B. tabaci was significantly higher when the predator was introduced 2 weeks rather than 1 week after B. tabaci infestation. The maximum mean weekly number of whiteflies/plant was 192.3 in the second week, whereas it was 294.6 in the third week and 1136.4 in the fifth week, in first, second and control cabins, respectively. In the last experimental week, the mean weekly numbers were 74.7, 122.9 and 684.7 whiteflies/plant in the three cabins, respectively. S. parcesetosum has been successfully fed, reproduced and established its population on B. tabaci on cotton plants. The mean weekly number of the predatory individuals increased gradually with the progress of the experimental time. The results demonstrated that the maximum reduction percentage in B. tabaci population was 90.7 and 86.5% in the fifth week after B. tabaci infestation, when the predator was introduced 1 and 2 weeks after the infestation with the whiteflies, respectively. Nevertheless, it is speculated that an earlier release of S. parcesetosum would be more effective in the biological control of B. tabaci.     

Lignin-degrading activity of edible mushroom <Emphasis Type="Italic">Strobilurus ohshimae</Emphasis> that forms fruiting bodies on buried sugi (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis>) twigs

Strobilurus ohshimae is an edible mushroom, and it specifically forms its fruiting bodies on buried sugi (Cryptomeria japonica) twigs. In this research, we studied lignindegrading activity of S. ohshimae. We isolated 18 strains of S. ohshimae from various regions of Japan, and determined their lignin degradation rates on sugi wood meal medium. All the strains of S. ohshimae degraded approximately 6%–12% of sugi lignin in 30 days, and these lignin degradation rates were 1.5–3 times higher than those of Trametes versicolor, which is a typical lignin-degrading fungus. Among the three main lignin-degrading enzymes, activity of lignin peroxidase and manganese peroxidase was not observed, while 4340U/g of laccase was produced in 30 days. To investigate the effect of wood species on lignin degradation by S. ohshimae, the lignin degradation rate and laccase productivity on sugi wood meal medium were compared with those on beech (Fagus crenata). In T. versicolor, both lignin degradation rate and laccase productivity were higher on beech than on sugi. Conversely, in S. ohshimae, lignin degradation rate and laccase productivity were higher on sugi than on beech. Therefore, it was suggested that coniferous lignin is not always difficult to degrade for the fungi that inhabit softwood. Part of this article presented at the 54th Annual Meeting of the Japan Wood Research Society, Sapporo, August 2004