Flavor release from iota-carrageenan matrices: a kinetic approach

Release of aroma compounds in selected iota-carrageenan systems was studied by static headspace analysis. By varying the sodium chloride content, different rheological behaviors were obtained ranging from solution to gel. From the release curves, mass transfer (h(D)) and partition coefficients (K(ga)) of ethyl butanoate, ethyl hexanoate, and linalool were extracted using a mathematical model based on the penetration theory. This model, previously developed for flavor release from stirred solutions, was found to fit well the data obtained from structured systems (nonstirred conditions) at the beginning and at the end of the release curves: this allowed the determination of h(D) and K(ga). Matrix effects appeared to be dependent on the chemical class of the compounds. For the alcohol, the main effect on both equilibrium partitioning and mass transfer across the interface was ascribed to a salting effect. In the opposite, for esters, iota-carrageenan addition induced an increase of aroma retention and also a slower transfer across the interface. The respective effects of an increasing viscosity of the medium and of the formation of a tridimensionnal network are discussed.     

Flavor perception and aroma release from model dairy desserts

Six model dairy desserts, with three different textures and two sucrose levels, were equally flavored with a blend of four aroma compounds [ethyl pentanoate, amyl acetate, hexanal, and (E)-2-hexenal] and evaluated by a seven person panel in order to study whether the sensory perception of the flavor and the aroma release during eating varied with the textural characteristics or the sweetness intensity of the desserts. The sensory perception was recorded by the time intensity (TI) method, while the in vivo aroma release was simultaneously measured by the MS-nose. Considering the panel as a whole, averaged flavor intensity increased with sucrose level and varied with the texture of the desserts. Depending on the aroma compound, the averaged profile of in vivo aroma release varied, but for each aroma compound, averaged aroma release showed no difference with the sucrose level and little difference with the texture of the desserts. Perceptual sweetness-aroma interactions were the main factors influencing perception whatever the texture of the desserts.     

Flavor release in the presence of melanoidins prepared from L-(+)-ascorbic acid and amino acids

High-molecular-weight (HMW) water-soluble melanoidins were prepared from model systems of L-(+)-ascorbic acid-glycine, L-(+)-ascorbic acid-lysine, L-(+)-ascorbic acid-glutamic acid, and glucose-glycine using a very recently approved standard protocol. The amount of HMW water-soluble melanoidins prepared from L-(+)-ascorbic acid was over 5-15 times higher than the amount obtained from glucose. The study of the release of a model flavor compound, namely isoamyl acetate, from melanoidins by solid-phase microextraction (SPME) showed that SPME is a suitable technique for the analysis of flavor release from melanoidin-containing solutions. From the studies on the retention capacity of the melanoidins toward isoamyl acetate, an increased release of the flavor compound was observed from the melanoidins prepared from the L-(+)-ascorbic acid-glycine model system, whereas the opposite effect was observed from the melanoidins prepared from the L-(+)-ascorbic acid-lysine/glutamic acid model systems. The melanoidins prepared from the glucose-glycine model system had the same effect as the melanoidins prepared from the L-(+)-ascorbic acid-glycine model system.     

Flavor release and perception in hard candy: influence of flavor compound-compound interactions

The influence of flavor compound-compound interactions on flavor release properties and flavor perception in hard candy was investigated. Hard candies made with two different modes of binary flavor delivery, (1) L-menthol and 1,8-cineole added as a mixture and (2) L-menthol and 1,8-cineole added separate from one another, were analyzed via breath analysis and sensory time-intensity testing. Single-flavor candy containing only L-menthol or 1,8-cineole was also investigated via breath analysis for comparison. The release rates of both L-menthol and 1,8-cineole in the breath were more rapid and at a higher concentration when the compounds were added to hard candy separate from one another in comparison to their addition as a mixture (conventional protocol). Additionally, the time-intensity study indicated a significantly increased flavor intensity (measured as overall cooling) for hard candy made with separate addition of these flavor compounds. In conclusion, the flavor properties of hard candy can be controlled, at least in part, by flavor compound-compound interactions and may be altered by the method of flavor delivery.     

Model studies on volatile release from different semisolid fat blends correlated with changes in sensory perception

The effect of dispersed aqueous droplets in water-in-oil (W/O)-emulsion semisolid fats on aroma release and sensory perception was investigated on margarine models where model aroma substances were added. Aroma release from W/O-emulsion fat blends and bulk fat blends with added monoglycerides combining different fatty acids of various short-chain free fatty acids, methylketones, esters, and lactones were measured using headspace solid phase microextraction-gas chromatography/mass spectrometry (SPME-GC/MS), and their perception profiles were evaluated by sensory analysis. The presence of aqueous phase in a fat blend significantly reduced the headspace concentrations of butanoic acid and hexanoic acid, and also decreased the perceived intensity of total aroma and cheesy aroma. The aroma release of methylketones, esters, and lactones from the W/O-emulsion fat blends increased with increasing carbon chain length of the volatile molecules. The intensity of aroma perception in a W/O-emulsion fat blend depended on the melting point of the fatty acids (oleic, palmitic, stearic, and behenic) of the monoglyceride used as an emulsifier. Thus, aroma release from a W/O-emulsion semisolid fat blend was influenced by interactions between aroma volatiles and the dispersed aqueous droplets and by their viscoelastic properties.     

Flavor release and perception in hard candy: influence of flavor compound-flavor solvent interactions

The release kinetics of l-menthol dissolved in propylene glycol (PG), Miglyol, or 1,8-cineole (two common odorless flavor solvents differing in polarity and a hydrophobic flavor compound) were monitored from a model aqueous system via atmospheric pressure chemical ionization mass spectrometry (APCI-MS). Breath analysis was also conducted via APCI-MS to monitor release of l-menthol from hard candy that used PG and Miglyol for l-menthol incorporation. The quantities of l-menthol released when dissolved in PG or Miglyol from the model aqueous system were found to be similar and overall significantly greater in comparison to when dissolved in 1,8-cineole. Analogous results were reported by the breath analysis of hard candy. The release kinetics of l-menthol from PG or Miglyol versus from 1,8-cineole were notably more rapid and higher in quantity. Results from the sensory time-intensity study also indicated that there was no perceived difference in the overall cooling intensity between the two flavor solvent delivery systems (PG and Miglyol).     

Flavor release and perception of flavored whey protein gels: perception is determined by texture rather than by release

Five whey protein gels, with different gel hardnesses and waterholding capacities, were flavored with ethylbutyrate or diacetyl and evaluated by a 10-person panel to study the relation between the gel structure and the sensory perception, as well as the nosespace flavor concentration during eating. The sensory perception of the flavor compounds was measured by the time-intensity method, while simultaneously the nosespace flavor concentration was monitored by the MS-Nose. The nosespace flavor concentration was found to be independent of the gel hardness or waterholding capacity. However, significant changes in flavor intensity between the gels were perceived by the majority of the panelists, despite the fact that the panelists were instructed to focus only on flavor perception and to not take texture into account. From these observations it is concluded that the texture of gels determines perception of flavor intensity rather than the in-nose flavor concentration.     

Comparative study of protein stabilization in white wine using zirconia and bentonite: physicochemical and wine sensory analysis

A semi-industrial application of the continuous stabilization of white wine protein using a column packed with zirconia was studied and compared to the traditional bentonite treatment using a Macabeu white wine. Physicochemical and wine sensory properties were evaluated using a rating system and triangle tests. Continuous protein stabilization was analyzed in three residence times, and the equivalent of 300 BV of wine was used for both treatments. Wine protein content was reduced by 21%, 40%, and 42% using the continuous process with residence times of 7.5, 15, and 30 min, respectively, and by 61.4% using the bentonite treatment. The wines obtained from the packed column were protein stable up to 25, 75, and 175 BV for residence times of 7.5, 15, and 30 min, respectively. The amount of polyphenol removed was less than 10%, and similar amounts were removed from the wine regardless of residence time, while 20.6% of polyphenol was removed using bentonite. The physicochemical and sensory properties of wine treated with bentonite were similar to those of wine treated with zirconia.     

Flavor encapsulation in yeasts: limonene used as a model system for characterization of the release mechanism

Empty yeast cells are used as a new delivery system for flavor encapsulation. The flavor release mechanism from yeast cells is characterized using a series of analytical techniques, and limonene is used as a model representing a hydrophobic flavor. Furthermore, the thermal stability of the capsules was assessed. The characterization of the cell wall structure gives rise to the development of an empirical model explaining water adsorption as well as the desorption singularities observed on drying. The study of the rate of flavor release as a function of temperature and water uptake in the cell wall clearly demonstrated a particular behavior of the yeast cell wall permeability. Below a water activity around 0.7, no flavor release is permitted whereas release occurs above it. Surface analysis on dry or wet cells using atomic force microscopy is discussed.     

Cooking behavior of rice in relation to kernel physicochemical and structural properties

A set of 27 rice varieties were evaluated for their morphological grain characteristics (length, width, thickness, thousand kernel weight, TKW), chemical composition (amylose, protein, and ash content) and starch properties (gelatinization temperature and enthalpy, amylose-lipid complex). In addition, cell walls were characterized by the arabinoxylan and beta-glucan contents. A rapid method for determining optimum rice cooking time was developed based on the swelling ratio; a fixed value of 2.55 gave a gelatinization level of 95% assessed by differential scanning calorimetry and translucence testing. Optimum cooking time appears positively correlated with kernel thickness and TKW but also with ash content. Confocal laser and scanning electron microscope observation of uncooked rice grains revealed different structural features (cell size) and fracture behavior: for some cultivars, the fracture showed ruptured cells, whereas for others most cells were intact. These structural differences, which may be linked to pectin content, could partly explain rice kernel cooking behavior.     

真空包装冷却猪肉低剂量辐照后的理化和感官特性变化

研究真空包装冷却猪肉经保鲜液处理或未经保鲜液处理，再分别经0 kGy、0.5 kGy、1 kGy和2 kGy低剂量辐照后的理化和感官特性变化，进而确定最佳的辐照处理方式以延长冷却猪肉的货架期。结果表明：经2 kGy辐照的真空包装冷却猪肉在(3±1)℃下贮存21 d时，TVB-N值、TBARS值和汁液流失率分别为20.17 mg/(100 g)、0.347 mg/kg、9.69%；而同样条件下，冷却猪肉首先用保鲜液处理，再经2 kGy辐照，其TVB-N值、TBARS值和汁液流失率分别为17.43 mg/(100 g)、0.237 mg/kg和9.18%。试验说明保鲜液处理可以在一定程度上提高辐照效果。在本试验设定的辐照剂量范围内，随着辐照剂量的增加，冷却猪肉的色泽逐渐变红，当辐照剂量达到2 kGy时，冷却猪肉的色泽达到最佳的鲜红状态，而且在贮存过程中鲜红色泽始终保持稳定，但其TBA值比对照组高(α<0.05)，不过大大小于1.0 mg/kg的脂肪氧化酸败临界范围值。冷却猪肉经过保鲜液处理+真空包装+2 kGy剂量辐照+冷藏，可以最大程度地延长冷却猪肉的货架期。     

Effect of emulsion properties on release of esters under static headspace, in vivo, and artificial throat conditions in relation to sensory intensity

The effects of oil content and droplet size distributions of dilute oil-in-water emulsions on release of four esters with different hydrophobicities were studied under in vivo, static headspace, and artificial throat conditions. The effect of oil content on orthonasal and retronasal perceived intensity of ethyl hexanoate was studied using a seven-person panel. With increasing oil content and with a higher hydrophobicity of the aroma compound, a stronger decrease in aroma release was found. This effect was stronger under static headspace conditions than under in vivo and artificial throat conditions, and the sensory intensity of ethyl hexanoate was perceived stronger orthonasally than retronasally. The lowest effective oil content was determined for all systems. Of the compounds tested, droplet size distribution only influenced the in vivo release of geranyl acetate. The artificial throat results correlated well with in vivo release, giving support to the assumption that a thin layer of liquid remaining in the throat after swallowing determines aroma release.     

Flavored yogurt complex viscosity influences real-time aroma release in the mouth and sensory properties

The influence of flavored yogurt texture on aroma perception and in-nose aroma release measured by atmospheric pressure chemical ionization mass spectrometry analysis was investigated. The study was carried out on six yogurts varied by protein composition and mechanical treatment. For the same matrix composition, the complex viscosity of yogurts influenced in-nose release and perception. After swallowing, aroma release and intensity of olfactory perception were stronger in low-viscosity yogurts than in high-viscosity yogurts. Moreover, the protein composition influenced aroma release only when yogurts exhibited wide variations of complex viscosity and consequently texture. In mouth, aroma release and perception were influenced more by yogurt mechanical treatment than by protein composition. On the basis of mass transfer analysis, the main physical mechanism which could explain the difference in aroma release would be the surface exchange area developed in the mouth and in the throat.     

Impact of whey pH at drainage on the physicochemical, sensory, and functional properties of mozzarella cheese made from buffalo milk

In this study, the effects of whey pH at drainage on the physicochemical, sensory, and functional properties of mozzarella cheese made from buffalo milk during storage were investigated. Four cheese samples were manufactured using starter culture at different whey pH values [(A) 6.2, (B) 5.9, (C) 5.6, and (D) 5.3] and analyzed on the 1st, 28th, and 56th day. Ash, calcium, and phosphorus concentrations decreased as the whey pH at drainage was lowered. Cheese yield and calcium recovery were the highest in D cheeses. During storage, expressible serum levels decreased and nonexpressible serum levels increased, indicating an increase in the water holding capacity of the cheeses. Reducing the calcium content of cheeses increased meltability values, but an overly low calcium level (D cheeses) had an adverse effect on the meltability. The melting properties of cheese samples, except D cheeses, were improved with aging. A cheeses were the hardest and D cheeses the softest throughout storage. The 1st day sensory evaluations revealed that C and D cheeses were preferred and that A cheeses were not. All sensory properties of A cheeses were improved with storage. D cheeses were rated inferior to the others at the end of the storage time.     

Characterization of the key aroma compounds in soy sauce using approaches of molecular sensory science

Application of aroma extract dilution analysis (AEDA) to the volatiles isolated from a commercial Japanese soy sauce revealed 30 odor-active compounds in the flavor dilution (FD) factor range of 8-4096, among which 2-phenylethanol showed the highest FD factor of 4096, followed by 3-(methylsulfanyl)propanal (methional), the tautomers 4-hydroxy-5-ethyl-2-methyl- and 4-hydroxy-2-ethyl-5-methyl-3(2H)-furanone (4-HEMF), 4-hydroxy-2,5-dimethyl-3(2H)-furanone (4-HDF), and 3-hydroxy-4,5-dimethyl-2(5H)-furanone (sotolone), all showing FD factors of 1024. Thirteen odorants were quantified by stable isotope dilution assays, and their odor activity values (OAVs) were calculated as ratio of their concentrations and odor thresholds in water. Among them, 3-methylbutanal (malty), sotolone (seasoning-like), 4-HEMF (caramel-like), 2-methylbutanal (malty), methional (cooked potato), ethanol (alcoholic), and ethyl 2-methylpropanoate (fruity) showed the highest OAVs (>200). An aqueous model aroma mixture containing 13 odorants, which had been identified with the highest OAVs, in concentrations that occur in the soy sauce showed a good similarity with the overall aroma of the soy sauce itself. Heat treatment of the soy sauce resulted in a clear change of the overall aroma. Quantitation of selected odorants revealed a significant decrease in sotolone and, in particular, increases in 2-acetyl-1-pyrroline, 4-HDMF, and 4-HEMF induced by heating.     

2:1矿物结构与阳离子固定及释放的关系

The effects of different structures of 2:1 layer minerals,layer charge location,and changes of structure and charge during the weathering process on the fixation and release of interlayer cations are reviewed.It could be concluded that the fixation capacity is determined by the total amount of interlayer charge originating from both octahedral and tetrahedral sheets.The realtionship between interlayer cation fixation and octahedral structure of the secondary minerals may be different from that of the primary mineralls.The oxidation and reduction of cations with varable valence can greatly influence the cation-fixation capacity.     

New filtration systems for extra-virgin olive oil: effect on antioxidant compounds, oxidative stability, and physicochemical and sensory properties

The purpose of this work was to evaluate some new filtration systems in relation to the quality of extra-virgin olive oil (EVOO). Filtration processes were undertaken using a polypropylene filter bag and two different inert gas flows as filter aids (argon and nitrogen). Qualitative and quantitative variations of the glyceride composition, antioxidant and pro-oxidant compounds, and water content were correlated with the oxidative stability to establish the effect on EVOO shelf life. The influence on physicochemical and sensorial properties was also evaluated. After filtration, the oxidative stability was reduced. The behavior of the polyphenols and water content on the filtration process could explain the lowest oxidative stability of filtered EVOO. Moreover, the results of the sensorial analysis confirmed that filtration using inert gases did not decrease the intensity of the main positive sensory attributes. The results could help olive-oil producers to improve EVOO quality and establish optimal storage conditions.