Polymerization-induced epitaxy: scanning tunneling microscopy of a hydrogen-bonded sheet of polyamide on graphite

A molecularly thin film of a two-dimensional polymer network formed by hydrogen bonding was synthesized and investigated with scanning tunneling microscopy. Poly(in-caprolactam) (nylon 6) was epitaxially grown on the basal plane of graphite and an ultrathin film of the polymer was obtained after the bulk materials had been washed away with solvents. The polymer chain has a planar, all-trans conformation and adjacent chains run in the antiparallel direction. This produces complete pairing of hydrogen bonding groups, with each amide group lying on a straight line perpendicular to the polymer backbone. This hydrogen-bonded sheet is oriented so that each polymer backbone lies in the (1010) direction on the graphite hexagonal lattice, as opposed to the (1120) direction taken by other paraffinic molecules studied so far. This experiment shows that hydrogen bonding can be used to control the orientation of macromolecules in two dimensions.     

Creation of liquid crystal waveguides with scanning force microscopy

The rubbing of a polymer layer, a commonly applied process, leads to an anisotropic surface morphology, aligning liquid crystal molecules. Scanning force microscopy can be used to intentionally create areas with a similar anisotropy by operating the instrument at loads in the range of 10(-7) to 10(-5) newtons. These areas have an orientation effect on liquid crystals indistinguishable from the rubbing process, which allows a systematic investigation of the orientation properties of an alignment layer as a function of its nanometer-scale morphology. Refractive index patterns can be tailored with this method by scratching a suitable area, as demonstrated by fabrication of an optical waveguide 6 micrometers wide and 5 millimeters long.     

Molecular structure of DNA by scanning tunneling microscopy

Uncoated DNA molecules marked with an activated tris(l-aziridinyl) phosphine oxide (TAPO) solution were deposited on gold substrates and imaged in air with the use of a high-resolution scanning tunneling microscope (STM). Constant-current and gap-modulated STM images show clear evidence of the helicity of the DNA structure: pitch periodicity ranges from 25 to 35 angstroms, whereas the average diameter is 20 angstroms. Molecular structure within a single helix turn was also observed.     

Single molecules observed by near-field scanning optical microscopy

Individual carbocyanine dye molecules in a sub-monolayer spread have been imaged with near-field scanning optical microscopy. Molecules can be repeatedly detected and spatially localized (to approximately lambda/50 where lambda is the wavelength of light) with a sensitivity of at least 0.005 molecules/(Hz)(1/2) and the orientation of each molecular dipole can be determined. This information is exploited to map the electric field distribution in the near-field aperture with molecular spatial resolution.     

Picosecond resolution in scanning tunneling microscopy

A method has been developed for performing fast time-resolved experiments with a scanning tunneling microscope. The method uses the intrinsic nonlinearity in the microscope's current versus voltage characteristics to resolve optically generated transient signals on picosecond time scales. The ability to combine the spatial resolution of tunneling microscopy with the time resolution of ultrafast optics yields a powerful tool for the investigation of dynamic phenomena on the atomic scale.     

Long-range electronic perturbations caused by defects using scanning tunneling microscopy

Real-space observations of long-range electronic perturbations caused by defects have been made with scanning tunneling microscopy. The defects are isolated adsorbed molecules on the surface of graphite. These defects perturb the charge density, giving periodic oscillations similar to Friedel oscillations. The oscillations have a wavelength radical3 times that of the graphite lattice, and the symmetry of the oscillations reflects the nature of the defect.     

Probing high-barrier pathways of surface reactions by scanning tunneling microscopy

The ability of scanning tunneling microscopy to probe the pathways of thermally activated high-barrier surface processes is frequently limited by competing low-barrier processes that can confuse measurement of the true initial and final configuration. We introduce an approach to circumvent this difficulty by driving the surface process with nanosecond laser heating. The method is applied to determine the pathway of recombinative desorption in the H/Si(001) system. The observed configuration of dangling bonds after laser heating reveals that the desorbed hydrogen molecules are not formed on single dimers, but rather from neighboring silicon dimers via an interdimer reaction pathway.     

High-resolution electron microscopy and scanning tunneling microscopy of native oxides on silicon

High-resolution transmission electron microscopy and scanning tunneling microscopy have been combined to examine the structure of the thin "native" oxide that forms on silicon surfaces at room temperature. Differences in the cleaning procedures for silicon wafers may affect the morphology of this oxide and critically influence further processing on the silicon substrates. An etch that ended with a dip in hydrofluoric acid provided a thinner oxide and a lower interface step density than did a sulfuric peroxide treatment. The availability of complementary information from high-resolution transmission electron microscopy and scanning tunneling microscopy is discussed.     

In situ scanning tunneling microscopy of corrosion of silver-gold alloys

An in situ scanning tunneling microscope (STM) was used to observe the morphological changes accompanying the selective dissolution of Ag from low-Ag content Ag-Au alloys in dilute perchloric acid. This study was undertaken to explore the role of surface diffusion in alloy corrosion processes. These results are interpreted within the framework of the kink-ledge-terrace model of a crystal surface and a recent model of alloy corrosion based on a variant of percolation theory. The corrosion process leads to roughening of the surface by dissolution of Ag atoms from terrace sites. Annealing or smoothening of the surface occurs by vacancy migration through clusters and the subsequent annihilation of clusters at terrace ledges.     

Growth of high aspect ratio nanometer-scale magnets with chemical vapor deposition and scanning tunneling microscopy

A combination of chemical vapor deposition and scanning tunneling microscopy techniques have been used to produce nanometer-scale, iron-containing deposits with high aspect ratios from an iron pentacarbonyl precursor both on a substrate and on the tunneling tip itself. The structure and composition of the resulting nanodeposits were determined by transmission electron microscopy and high spatial resolution Auger electron spectroscopy. Either polycrystalline, relatively pure, body-centered-cubic iron or disordered carbon-rich material can be deposited, depending on the bias conditions of the tip sample junction and the precursor pressure. Two mechanisms of decomposition are inferred from the growth phenomenology.     

Endothelial projections as revealed by scanning electron microscopy

Scanning electron micrographs of the endothelium of the pulmonary artery reveal that the entire surface is covered by a meshwork of irregular projections which vastly increase the surface area. The size and density of the projections suggest that they may function to direct an eddying flow of plasma along the endothelial surface.     

Microaggregations of oceanic plankton observed by towed video microscopy

Oceanic plankton have been hypothesized to occur in micropatches (<10 meters) that can have a large impact on marine ecosystem dynamics. Towed video microscopy was used to unobtrusively determine distributions of oceanic plankton over a continuum of scales from microns to hundreds of meters. Distinct, taxa-specific aggregations measuring less than 20 centimeters were found for copepods but not for nonmotile (cyanobacterial colonies) or asexual (doliolid phorozooids) forms, which suggests that these small patches are related to mating. Significant patchiness was also found on larger scales and was correlated among taxa, indicating physical control. These video observations provide new insights into basic plankton ecology by allowing quantitative assessment of individual plankton in their natural, undisturbed state.     

Photon emission at molecular resolution induced by a scanning tunneling microscope

The tip-surface region of a scanning tunneling microscope (STM) emits light when the energy of the tunneling electrons is sufficient to excite luminescent processes. These processes provide access to dynamic aspects of the local electronic structure that are not directly amenable to conventional STM experiments. From monolayer films of carbon-60 fullerenes on gold(110) surfaces, intense emission is observed when the STM tip is placed above an individual molecule. The diameter of this emission spot associated with carbon-60 is approximately 4 angstroms. These results demonstrate the highest spatial resolution of light emission to date with a scanning probe technique.     

Seeing phenomena in flatland: studies of monolayers by fluorescence microscopy

Monolayers formed at the interface between air and water can be seen with fluorescence microscopy. This allows the phase behavior of these monolayers to be determined by direct observation and opens up the possibility of following the kinetics of phase transformations in two-dimensional systems. Some unexpected morphologies have been discovered that provide information about the nature of monolayer phases and have connections to pattern formation in other systems.     

Kinetics of single-layer graphite oxidation: evaluation by electron microscopy

Etch-decoration reveals that the rate of removal of carbon atoms exposed at monolayer steps on graphite surfaces is very different from the rate of removal, under identical conditions, at multilayer steps. At 1113 degrees K and a pressure of 1.33 newtons per square meter of oxygen, the rate of oxidation (along the layer planes) is less by a factor of nearly 100 than that at multilayer steps.     

Mechanism of single-layer graphite oxidation: evaluation by electron microscopy

Etch-decoration reveals that the rate of removal of carbon atoms exposed at monolayer steps on graphite surfaces depends on the population density of these edge atoms (the rate is higher at a low-density surface) and that carbon removal continues for a prolonged period after the oxygen supply in the gas phase has been shut off. The edge carbons are removed by both oxygen from the gas phase and oxygen in the adsorbed oxides which migrate from the neighboring basal carbon atoms.     

福寿螺齿舌、性腺和卵粒结构扫描电镜观察

利用扫描电镜对福寿螺的齿舌、精巢、卵巢和卵粒结构进行观察分析,结果表明:福寿螺的齿舌为纽舌型,齿式为(2·1·1·1·2)×35,各个齿的尖端锋利。雄螺精巢结构较简单无生精小管,生精细胞通过基膜着生在分枝的结缔组织上,精巢腔呈网状,彼此相通;结缔组织小梁间腔内分布着球状、大小不等、数量繁多的各级精细胞。雌螺卵巢较大,呈粉红色树枝状,紧贴在消化腺上;卵巢的主体结构是滤泡,卵母细胞在滤泡内发育成熟;卵母细胞分布均匀,大小之间无明显区别。发育7d的卵粒表面散乱地分布着不规则的膏状物;发育14d的卵粒表面膏状物稀少,卵粒表面有高低起伏的褶皱,表层物有裂痕。     

白斑新灰蝶触角感器的扫描电镜观察

【目的】了解白斑新灰蝶触角感器的种类、数量及分布情况.【方法】利用扫描电镜对白斑新灰蝶雌、雄成虫的触角及触角感器进行观察研究.【结果】白斑新灰蝶星形感受器数量最多,有14 409个、毛形感受器次之,约为5 741个、刺形感受器、锥形感受器、耳形感受器数量居中,分别为256、125和560个.腔锥形感受器、腔形感受器、和鳞形感受器数量较少,分别为54、20和84个.【结论】白斑新灰蝶雌雄成虫触角上共8种感器,多集中于触角腹面.雌性感器数量多于雄性,感器类型和分布在雌雄间无明显差异.     

Internal cellular details of Euglena gracilis visualized by scanning electron microscopy

Simple washing of live Euglena gracilis cleans the pellicle of external coating material. When these cleaned cells are viewed with a scanning electron microscope, organelle outlines can be seen through the thinned pellicle. To view organelles directly, fixed Euglena cells are gently broken first or first frozen and then broken as part of their preparation for scanning electron microscopy. Subsequent viewing at magnifications of x 5,000 to x 21,000 reveals organelles, storage granules, endoplasmic reticulum, and nuclear pores, while retaining great depth of focus.