Trace element partition coefficient in ionic crystals

Partition coefficient monovalent trace ions between liquids and either solid NaNO(2) or KCl were determined. The isotropic elastic model of ionic crystals was used for calculating the energy change caused by the ionic substitutions. The observed values of partition coefficients in KCl good agreement with calculate values.     

Vertical aluminophosphate molecular sieve crystals grown at inorganic-organic interfaces

Tubular aluminophosphate molecular sieve crystals were grown at an organic interface with their channels (7 angstroms in cross section) vertical to the substrate. To induce surface nucleation and oriented growth of AIPO(4)-5 crystals, organophosphonate layers cross-linked with Zr(IV) were assembled on a gold substrate and the modified substrate was immersed in a hydrothermal bath containing reagents for the synthesis of the molecular sieve. Reflection-absorption infrared studies demonstrated the stability of the phosphonate layers under these conditions. Drastic changes in the morphology of the surface-grown crystals from spherical agglomerates to vertical needles to thin tilted needles could be achieved by adjusting the water content of the synthesis bath. Nitrogen sorption in these structures on a piezoelectric device confirmed the presence of zeolitic microporosity.     

Neutron scattering of solution-grown polymer crystals: molecular dimensions are insensitive to molecular weight

Neutron scattering gives information on molecular conformations in solid solutions of polymers of one isotope in another. Results on crystals of polyethylene grown from solution show a molecular dimension (in the form of a radius of gyration) that is almost invariant with the length of the chain. It is proposed that certain lengths of folded chains fold back onto themselves to form stacks of chain-folded ribbons ("superfolding").     

Atomic force microscopy of the electrochemical nucleation and growth of molecular crystals

In situ atomic force microscopy reveals the morphology, surface topography, and growth and dissolution characteristics of microscopic single crystals of the low-dimensional organic conductor (tetrathiafulvalene)Br(0.76)' which are grown by electrocrystallization on a highly oriented pyrolytic graphite electrode in an atomic force microscope liquid cell. The growth modes and the distribution and orientation of topographic features on specific crystal faces, whose identity was determined by "atomic force microscope goniometry," can be correlated with the strength and direction of anisotropic solid-state intermolecular bonding. Growth on the (011) face of (tetrathiafulvalene)Br(0.76) crystals involves the formation of oriented self-similar triangular islands ranging in size from 200 to 5000 angstroms along a side. These nuclei eventually transform into rectangular rafts at larger length scales, where bulk intermolecular bonding interactions and surface energies dominate over nuclei-substrate interactions.     

Explosive backpacks in old termite workers

By nature, defensive behavior is risky. In social insects, such behavior is more likely to occur in individuals whose potential for other tasks is diminished. We show that workers of the termite Neocapritermes taracua develop an exceptional two-component suicidal apparatus consisting of copper-containing protein crystals, stored in external pouches, and internal salivary glands. During aggressive encounters, their bodies rupture, and the crystals react with the salivary gland secretion to produce a toxic droplet. Both the amount of defensive substances and the readiness to explode increase with workers' age, as their food-collecting ability declines.     

Maskelynite: Formation by Explosive Shock

When high pressure (250 to 300 kilobars) was applied suddenly (shock-loading) to gabbro, the plagioclase was transformed to a noncrystalline phase (maskelynite) by a solid-state reaction at a low temperature, while the proxene remained crystalline. The shock-loaded gabbro resembles meteorites of the shergottite class; this suggests that the latter formed as a result of shock. The shock-loading of gabbro at 600 to 800 kilobars raised the temperature above the melting range of the plagioclase.     

Graphite polyhedral crystals

Polyhedral nano- and microstructures with shapes of faceted needles, rods, rings, barrels, and double-tipped pyramids, which we call graphite polyhedral crystals (GPCs), have been discovered. They were found in pores of glassy carbon. They have nanotube cores and graphite faces, and they can exhibit unusual sevenfold, ninefold, or more complex axial symmetry. Although some are giant radially extended nanotubes, Raman spectroscopy and transmission electron microscopy suggest GPCs have a degree of perfection higher than in multiwall nanotubes of similar size. The crystals are up to 1 micrometer in cross section and 5 micrometers in length, and they can probably be grown in much larger sizes. Preliminary results suggest a high electrical conductivity, strength, and chemical stability of GPC.     

Virus-induced cholesterol crystals

One of the crystal types induced in cell cultures by a new feline herpesvirus was identified as cholesterol by crystal structure, polarized light microscopy, and mass spectroscopy.     

Fast ionic transport in solids

The discovery of inorganic solids with ionic conductivities comparable to those of aqueous electrolytes has revolutionized solid-state electrochemistry. Sodium beta alumina, a Na(+) conductor, and LixTiS(2), an intercalation compound with simultaneous Li(+) and electronic conductivity, are two of the best and most versatile fast ionic conductors. A wide variety of cations can replace Na(+) in beta alumina and Li(+) in LixTiS(2) and change the properties of the materials. Sodium beta alumina and LixTiS(2) are currently used in the development of high-energy density batteries for electric vehicles and electrical utility load leveling. Current research in solid ionic conductors is exploring new intercalation compounds, solid polymer electrolytes, and alkali ion and proton transport in crystalline solids.     

Electrodeposited ceramic single crystals

Single-crystal films are essential for devices because the intrinsic properties of the material, rather than its grain boundaries, can be exploited. Cubic bismuth oxide has the highest known oxide ion mobility, which makes it useful for fuel cells and sensors, but it is normally only stable from 729 degrees to 825 degrees C. The material has not been previously observed at room temperature. Single-crystal films of the high-temperature cubic polymorph of bismuth oxide were epitaxially electrodeposited from an aqueous solution onto single-crystal gold substrates. The 35.4 percent lattice mismatch was accommodated by forming coincidence lattices in which the bismuth oxide film was rotated in relation to the gold substrate. These results provide a method for producing other nonequilibrium phases that cannot be accessed by traditional thermal processing.     

Burst Conditions of Explosive Volcanic Eruptions Recorded on Microbarographs

Explosive volcanic eruptions generate pressure disturbances in the atmosphere that propagate away either as acoustic or as shock waves, depending on the explosivity of the eruption. Both types of waves are recorded on microbarographs as 1- to 0.1-hertz N-shaped signals followed by a longer period coda. These waveforms can be used to estimate burst pressures and gas concentrations in explosive volcanic eruptions and provide estimates of eruption magnitudes.