Changes in Tomato Fruit Quality and Antioxidant Enzyme Activities under Deficit Irrigation and Fertilizer Application in a Solar Greenhouse in Northwest China

The interaction between water availability in the soil and fertilizer application rates often strongly affects crop growth. In the current study, the quality of fresh fruit and antioxidant enzymes of tomato crops (Lycopersicon esculentum Mill) were investigated under different irrigation (low water content [W_l]: 50 ~ 60% field moisture capacity (FMC); moderate [W_m]: 70 ~ 80% FMC; and high [W_h]: 90 ~ 100% FMC) and fertilizer conditions (deficit fertilizer [F_l]: 195 kg ha^?1 nitrogen (N) + 47 kg ha^?1 phosphorus pentoxide (P₂O₅) and moderate [F_m]: 278 kg ha^?1 N + 67 kg ha^?1 P₂O₅) in a solar greenhouse. The results showed that the quality of fresh fruits and the antioxidant enzyme activities in the leaves and fruits were related to the water content in the soil. Deficit irrigation improved the fruit quality and 50 ~ 60% FMC combined with fertilizer application rates of 195 kg ha^?1 N + 47 kg ha^?1 P₂O₅ is recommended for tomato crop cultivation under greenhouse conditions.     

Potassium fertilization and soil diagnostic criteria for forage corn (Zea mays L.) production contributing to lower potassium input in regional fertilizer recommendation

Abstract

Effective soil diagnostic criteria for exchangeable potassium (Ex-K) combined with inorganic potassium (K) application rates were developed to lower K input in forage corn (Zea mays L.) production using experimental fields with different application rates and histories of cattle manure compost. Two corn varieties, ‘Cecilia’ as a low K uptake variety and ‘Yumechikara’ as a high K uptake variety, were selected from among 20 varieties and tested to make diagnostic criteria for K fertilization applicable to varieties with different K uptakes. The K uptakes increased from 96 to 303 kg K ha^?1 for ‘Cecilia’ and from 123 to 411 kg K ha^?1 for ‘Yumechikara’ with increasing Ex-K content on a dry soil basis from 0.11 to 0.92 g kg^?1 with no inorganic K fertilizer application. The K uptake by corn for achieving the target dry matter yield of 18 Mg ha^?1 was estimated to be approximately 200 kg K ha^?1 in common between the two varieties. Yields of both varieties achieved the target yield at an Ex-K content of approximately 0.30 g kg^?1 with no K fertilization, although ‘Yumechikara’ reached the target yield at a lower Ex-K content. At the low Ex-K content of 0.1 g kg^?1, inorganic K fertilizer application at 83 kg K ha^?1 was needed to gain the target yield, and apparent K recovery rate for K fertilizer was calculated to be 70% for both varieties. The K uptakes for gaining the target yield by the K fertilization were lower than that by soil K supply. Based on these results, diagnostic criteria of Ex-K and inorganic K application rates were set up as follows: at an Ex-K content of < 0.15 g kg^?1, inorganic K fertilizer is applied at 83 kg K ha^?1 (100 kg ha^?1 as potassium oxide (K₂O) equivalent); at an Ex-K content of 0.15–0.30 g kg^?1, the application rate is reduced to 33 kg K ha^?1 (40 kg K₂O ha^?1); at an Ex-K content of ≥ 0.30 g kg^?1, inorganic K fertilizer is not applied because of sufficient K in the soil. Additionally, we propose that cattle manure compost be used to supplement soil K fertility.     

Response of Fertigation Under Buried Straw Layer on Growth,Yield, and Water-fertilizer Productivity of Chinese Cabbage Under Greenhouse Conditions

In the present study, the effect of buried straw (two levels; M_S; buried straw layer and M_N; no straw layer), nitrogen fertilizer (two levels: F_H, 120 kg ha^?1 and F_L, 80 kg ha^?1), and deficit drip irrigation with irrigation frequency of 2 days (two irrigation regimes: I₅₀; 50% and I₃₀; 30% of evapotranspiration) was investigated on a greenhouse-grown leafy cabbage for two consecutive seasons. The results indicated that in both the seasons, T₅ (M_NF_HI₅₀) gave higher yield when compared to all other treatments but it also utilized more water and fertilizer. On the other hand, with a 5–10% decrease in yield comparing to T₅ (M_NF_HI₅₀), T₂ (M_BSF_LI₅₀) and T₄ (M_SF_LI₃₀) saved 33% of fertilizer. T₄ (M_BSF_LI₃₀) also gave the highest water and fertilizer use efficiencies when compared to all other treatments. However, it was clearly noted that T₄ (M_SF_LI₃₀) treatment could save water and nitrogen without a significant decrease in fresh yield of Chinese cabbage. Hence, T₄ (M_sF_LI₃₀) is the recommended strategy to manage water and nitrogen fertilizer for getting optimal leafy cabbage plant growth and yield.     

Effects of Nitrogen Application Rates on Rice Grain Yield,Nitrogen-Use Efficiency,and Water Quality in Paddy Field

Excessive nitrogen (N) fertilizer application is common in the central Zhejiang Province area, China. A three-year (2009–11) experiment was conducted to determine the optimum N application rate for this area by studying the effects of various N rates on rice (Oryza sativa L.) yield, N-use efficiency (NUE), and quality of paddy field water. Results showed that no significant yield differences were observed under N rates from 180 to 315 kg ha^?1. The NUE could be improved by reducing N application rates without significantly decreasing yield. Due to high ammonia (NH₄⁺-N) and nitrate (NO₃^—N) concentrations, 5–7 days after N application was a critical stage for reducing N pollution. The N rate for the greatest yield was 176 kg ha^?1, accounting for 65 percent of the conventional N rate (270 kg ha^?1). The N-rate reduction in this area may be necessary for maintaining high yield, improving NUE, and reducing environmental pollution.     

Optimizing water,nitrogen and crop density in canola cultivation using response surface methodology and central composite design

Abstract

Optimisation of water and nitrogen use is an effective management tool to conserve resources and reduce environmental pollutions. Response surface methodology (RSM) is defined as a collection of mathematical and statistical methods that are used to develop, to improve or to optimize a product or process. In order to determine optimum levels of water, nitrogen and planting density of canola (Brassica napus L.), a 2-year experiment (2010–2011) was carried out by central composite design as RSM at the research station of Ferdowsi University of Mashhad. The treatments were designed based on low and high levels of irrigation (1500 and 4000 m³ ha^?1), nitrogen (0 and 400 kg N ha^?1) and density (50 and 150 plant m^?2) as independent variables. Furthermore, seed yield, nitrogen losses, nitrogen use efficiency (NUE) and water use efficiency (WUE) were measured as response variables in a full quadratic polynomial model. Optimum levels of irrigation, nitrogen and planting density were suggested to achieve the target range of dependent variables based on three scenarios: economic, environmental and eco-environmental. The results showed that increasing irrigation and fertilizer led to an increase in seed yield and nitrogen losses, whereas increasing canola density resulted in an increase in seed yield but a decrease in nitrogen losses. The optimum levels of water, fertilizer and density based on environmental scenario were 1802 m³ ha^?1, 11 kg N ha^?1 and 122 plant m^?2, respectively. To achieve optimum conditions under the economic scenario, it is necessary to use 3411 m³ water ha^?1, 178 kg N ha^?1 and 119 plant m^?2. Amounts of 2347 m³ water ha^?1, 92 kg N ha^?1 and 114 plant m^?2 were found to be the optimum conditions for the eco-environmental scenario. In general, it seems that resource use based on the eco-environmental scenario may be the most favorable cropping strategy for canola production.     

Effect of soil water management and different sowing dates on maize yield and water use efficiency under drip irrigation system

A 2-year field experiment (2012–2013) was conducted to evaluate the yield and water use efficiency (WUE) response of maize (Zea mays L.) to different soil water managements at different sowing dates. The experiment included three sowing dates (22 June, 6 July and 21 July) and four irrigation regimes based on maximum allowable depletion (MAD) of the total available soil water (TAW). The irrigation treatments were marked by I₁ to I₃ as 40%, 60% and 80% MAD of TAW, respectively, and with no irrigation. The results showed that grain yield reduced when planting was delayed in both years, ranging from 6105 to 4577 kg ha^?1 in 2012 and from 7079 to 5380 kg ha^?1 in 2013. However, WUE increased when planting was delayed from 22 June until 21 July. Also the highest grain yield was observed in the first irrigation treatment (MAD = 40%) in both years, and the highest WUE was obtained in the second irrigation treatment (MAD = 60%) with 1.64 and 1.61 (kg m^?3) in 2012 and 2013, respectively. These findings suggest that delay in planting date and the use of MAD = 60% treatment in Mediterranean-type region such as Golestan, Iran, can be useful in saving water that is highly important in such regions.     

Influence of Potassium Rates and Sources on Seed Cotton Yield and Yield Components of Some Elite Cotton Cultivars

Abstract

A field experiment was conducted at Central Cotton Research Institute, Multan, Pakistan on Miani soil series, silt loam soil (Calcaric, Cambisols and fine silty, mixed Hyperthermic Fluventic Haplocambids) to assess the response of four cotton (Gossypium hirsutum L.) cultivars to potassium (K) fertilization. The treatments consisted of four cotton cultivars (CIM-448, CIM-1100, NIAB-Karishma, S-12), four potassium rates (0, 62.5, 125, 250 kg K ha^?1), and two sources of potassium fertilizer [muriate of potash (KCl) and sulphate of potash (K₂SO₄)]. The cotton cultivars differed significantly in response to various potassium fertilizer levels and its sources with respect to seed cotton yield and its components. The highest yield was obtained with the application of 250-kg K ha^?1, however, it was economical to add 125 kg K ha^?1. Seed cotton yield of cv. CIM-448 was considerably greater than that of the other cultivars in K-unfertilized treatments, which was related to cultivar differences in K uptake efficiency in utilizing native potassium nutrient. Potassium added as muriate of potash caused a significant depression in seed cotton yield than that of sulphate of potash. The increase in yield seemed to have resulted largely from the higher K concentration of leaf tissues at bloom stage and available soil-K because of potassium application. A significant relationship between the yield and number of bolls per plant (r = 0.92**) and boll weight (r = 0.85**) indicated that these two growth attributes were responsible for enhancing the quantum of final harvest of seed cotton.     

Combined use of millet glume-derived compost and mineral fertilizer enhances soil microbial biomass and pearl millet yields in a low-input millet cropping system in Niger

A two-year field experiment was conducted in Niger to explore the effects of integrated use of millet glume-derived compost (MGD-Compost) and NP fertilizer on soil microbial biomass carbon (C_mic), nitrogen (N_mic) and millet yields. Three compost rates (3000 kg ha^?1, 1500 kg ha^?1 and 0 kg ha^?1) and three NP fertilizer rates (100%, 50% and 0% of recommended NP fertilizer) were arranged in a factorial experiment organized in a randomized complete block design with three replications. Combined application of compost and NP fertilizer induced a synergistic effect on C_mic and N_mic. Compost application increased millet grain yield from 59% to 91% compared to control. Combined application of compost and NP fertilizer increased millet grain yields from 57% to 70% in 2013 and from 36% to 82% in 2014 compared to sole application of mineral fertilizer. Agronomic efficiency (AE) of nitrogen values increased by 3.7 and 2.3 times than those of sole NP fertilizer application in 2013 and 2014, respectively. Phosphorus AE was 1.6 times higher than that of the sole application of NP fertilizer. These findings indicate that integrated application of MGD-Compost and NP fertilizer enhances soil microbial biomass content and increases millet grain yield in a low-input cropping system.     

Inoculation of rapeseed under different rates of inorganic nitrogen and sulfur fertilizer: impact on water relations,cell membrane stability,chlorophyll content and yield

It is important to develop integrated fertilization strategies for various crops that enhance the competitive ability of the crop, maximize crop production and reduce the risk of nonpoint source pollution from fertilizers. In order to study the effects of mineral nitrogen fertilization and biofertilizer inoculation on yield and some physiological traits of rapeseed (Brassica napus L.) under different levels of sulfur fertilizer, field experiments in factorial scheme based on randomized complete block design were conducted with three replications in 2012 and 2013. Experimental factors were: (1) four levels of chemical nitrogen fertilizer (0, 100, 150 and 200 kg N ha^?1), (2) two levels of biofertilizer (with and without inoculation) consisting Azotobacter sp. and Azospirillum sp. and (3) two levels of sulfur application (0 and 50 kg S ha^?1). Rapeseed yield, oil content of grains and studied physiological traits had a strong association with the N fertilization, biofertilizer inoculation and sulfur (S) application. Higher rates of N fertilization, biofertilizer inoculation and S application increased the grain yield of rapeseed. In the case of physiological traits, the highest value of relative water content (RWC) was recorded in 100 kg N ha^?1 that was statistically in par with 150 kg N ha^?1 application, while usage of 150 kg N ha^?1 showed the maximum cell membrane stability (CMS). Inoculation with biofertilizer and S fertilization resulted in higher RWC and CMS in rapeseed plants. The chlorophyll content showed its maximum values in the highest level of N fertilization, biofertilizer inoculation and S application. The usage of 200 kg N ha^?1 significantly decreased the oil content of rapeseed grains, but the highest grain oil content was obtained from the application of 150 kg N ha^?1, Azotobacter sp. and Azospirillum sp. inoculation and S fertilization. It seems that moderate N rate (about 150 kg N ha^?1) and S application (about 50 kg S ha^?1) can prove to be beneficial in improving growth, development and total yield of inoculated rapeseed plants.     

Modeling of Soil-Plant-Fertilizer Relationships for Optimizing Fertilizer Doses for Different Levels of Finger Millet Yield under Semi-Arid Alfisols

Experiments were conducted to test the superiority of treatment combinations of nitrogen (N; 0, 50, 100, 150, 200 kg ha^?1), phosphorus (0, 30, 60, 90 kg ha^?1) and potassium (0, 30, 60 kg ha^?1) for finger millet during 2005–2007. Application of 200-90-60 kg ha^?1 gave maximum yield of 1666, 1426 and 1640 kg ha^?1 in 3 years, respectively. The yield regression model through soil and fertilizer nutrients gave predictability of 0.98, 0.97 and 0.98, with sustainability yield index (SYI) of 50.4, 49.4 and 52.5 in 2005, 2006 and 2007, respectively. Optimum nitrogen, phosphorus and potassium (NPK) doses for attaining yields of 800 and 1200 kg ha^?1 were derived at soil nitrogen, phosphorus and potassium of 75–400, 10–70 and 150–750 kg ha^?1. Fertilizer nitrogen, phosphorus and potassium ranged from 30–128, 3–19, 13–25 kg ha^?1 and 105–203, 4–32, 27–39 kg ha^?1 for attaining 800 and 1200 kg ha^?1 yield, respectively. The doses could be adopted for attaining sustainable yields under semiarid Alfisols.     

Soil-Test-Based Optimum Fertilizer Doses for Attaining Yield Targets of Rice under Midland Alfisols of Eastern India

Soil-test crop-response experiments on rice were conducted in the Bastar Plateau Agroclimatic Zone of Chhattisgarh during 2009–2011 to assess yield, soil, plant, and fertilizer nitrogen (N), phosphorus (P), and potassium (K) nutrient relationships and calibrate optimum fertilizer doses for attaining yield targets. Soil fertility status was poor to medium for N (194–283 kg ha^?1) and P (7.53–19.66 kg ha^?1), and medium to good for K (226–320 kg ha^?1). Based on nutrient requirements (NR, kg q^?1) and contributions from soil (CS, %), fertilizer (CF, %), and farmyard manure (CFYM, %), optimum fertilizer doses were derived. The fertilizer doses were validated for attaining yield targets of 5000 and 6000 kg ha^?1 in farmer’s fields. Rice yield within 10% deviation was attained, which indicated that soil-test-based fertilizer dose was superior. This approach could be adopted for regions with similar soil and agroclimatic conditions in other parts of the world to increase rice yields.     

Drought Tolerance and Ion Accumulation of Rice Following Application of Additional Potassium Fertilizer

Five levels of water stress cycle (control flooded, control saturated, 5, 10, and 15 days of irrigation interval) and three potassium fertilization levels [80 kg, 120 kg, and kg 160 dipotassium oxide (K₂O) ha^?1] were exposed to investigate the influence of potassium fertilizer for minimizing water stress effect and maximizing productivity of rice. Different phyto-physiological parameters as well as uptake of major nutrient elements [nitrogen (N), phosphorus (P), potassium (K), calcium (Ca), magnesium (Mg), iron (Fe)] were examined. It was observed that rice yield, harvest index, and other physiological parameters reduces with increasing duration of water stress while application of additional potassium fertilizer has progressive impact on those parameters. From our observation, 10 days of watering cycle with potassium fertilization at 120 kg K₂O ha^?1 produces highest grain yield and harvest index. Uptake of major nutrient elements was also enhanced by potassium fertilizer. Therefore, it can be stated that additional potassium fertilizer application could be useful to mitigate water stress effect in rice.     

Drip fertigation and irrigation interval effects on growth,productivity, nutrient,and water economy in summer peanut

ABSTRACT

The present investigation was carried out to study the effect of irrigation intervals and fertigation on growth, yield, and quality of peanut as well as an account of fertilizer and water savings under drip irrigation combined with fertigation. Pod and haulm yields and economics of peanut with application of irrigation water at I_1, i.e. 4 day interval through drip (10 day in surface irrigation) did not differ significantly compared with I_2, i.e. 6 day interval through drip (15 day in surface irrigation). However, significantly higher kernel and oil yields were obtained at I₁ and also recorded higher partial factor productivity (PFP). Our study showed that drip irrigation saved 37.2% irrigation water over surface method. Fertigation at 75% Nitrogen & potassium (NK) through drip with 75% P in soil (F₃) significantly improved pod, haulm, kernel, and oil yields by 14.3%, 11.5%, 13.9%, and 12.3%, respectively, while net returns increased by INR 13,499 ha^?1 over 50% NK through drip with 50% P in soil (F₂) and at par with others. Fertigation at 50–100% NK with 50?100% P in soil (F₂ to F₄) could save 36.4–37.3% irrigation water over F₁. Maximum PFP was recorded under F₂.

Abbreviations: N: Nitrogen; P: phosphorus; K: potassium; M: million     

Nutrient uptake and use efficiency of onion seed yield as influenced by nitrogen and phosphorus fertilization

Abstract

The experiment was conducted at Kulumsa, South East Ethiopia, using four levels of nitrogen (N) (0, 50,100 and 150?kg N ha^?1) and four levels of phosphorus (P) (0, 35, 70 and 105?kg P₂O₅ ha^?1) fertilizers arranged in 4?×?4 factorial arrangements in randomized complete block design with three replications. The available P was increased after harvest due to the application of N and P fertilizer at the rates of 100 or 150?kg N ha^?1 and 70 or 105?kg P₂O₅ ha^?1. More specifically, nutrients concentration and nutrient uptake were significantly (p?<?.01) varied among treatment combinations and nutrient use efficiency was declined by increasing N and P after optimum rates. The higher physiological efficiency of N (53.47?kg kg^?1) and P (580.41?kg kg^?1) and the highest apparent recovery of N (19.62%) and P (2.47%) was recorded from application of 50?kg N ha^?1 and P at 70?kg P₂O₅ ha^?1 and the highest agronomic efficiency of N (10.78?kg kg^?1) and P (15.25?kg kg^?1) was recorded from N at the rate of 50?kg N ha^?1 and P at 35?kg P₂O₅ ha^?1, respectively. The combination of N at 100?kg N ha^?1 and P at 70?kg P₂O₅ ha^?1 was promising combination that generated highest net benefit 488,878.5 ETB (Ethiopian birr) ha^?1 with the highest marginal rate of return (36638%) and gave the highest seed yield (1858.82?kg ha^?1) with yield increment of about 57.72% over the control.     

Macro-Nutrient Concentration and Content of Irrigated Soybean Grown in the Early Production System of the Midsouth

Macro-nutrients in soybean (Glycine max L. Merr.) have not been extensively researched recently. Concentrations and contents of nitrogen, phosphorus, potassium, calcium, magnesium, and sulfur (N, P, K, Ca, Mg, and S) were determined for three irrigated cultivars grown using the early soybean production system (ESPS) on two soils (a sandy loam and a clay) in the Mississippi Delta during 2011 and 2012. Data were collected at growth stages V3, R2, R4, R6, and R8. No change in macro-nutrients due to soil type or years occurred and modern cultivars were similar to data collected >50 years ago. Mean seed yield of 3328 kg ha^?1 removed 194.7 kg N ha^?1, 16.5 kg P ha^?1, 86.0 kg K ha^?1, 17.5 kg Ca ha^?1, 9.0 kg Mg ha^?1, and 10.4 kg S ha^?1. Increased yields over the decades are likely due to changed plant architecture and/or pests resistance, improved cultural practices, chemical weed control, and increased levels of atmospheric carbon dioxide (CO₂). Yield improvements by genetically manipulating nutrient uptake appear to be unlikely.     

Response of Chickpea Cultivars to Application of Boron in Boron‐Deficient Calcareous Soils

Abstract

This study was conducted to investigate the effects of four boron (B) doses (control, 0 kg B ha^?1; B₁, 1 kg B ha^?1; B₂, 3 kg B ha^?1; and B₃, 6 kg B ha^?1) in soils deficient in available B (0.19 mg B kg^?1) and lime (CaCO₃) content (20.7%) on yield and some yield components of five chickpea (Cicer arietinum L.) genotypes, namely Akçin‐91, Population, Gökçe, ?zmir‐92, and Menemen‐92 in central Anatolian Turkey in the 2002 and 2003 growing seasons. Plant height, pods per plant, grain yield, protein content, protein yield, thousand seed weight, and leaf B concentration were measured. Grain yields in all genotypes (except for Gökçe) were significantly increased by 1 kg ha^?1 B application. Application of 1 kg ha^?1 B increased the yield by an average of 5%. Genotypes studied showed significant variations with respect to their responses to additional B. Akçin‐91 gave the highest grain yield (1704.8 kg ha^?1) at 3 kg B ha^?1, whereas Population, ?zmir‐92, and Menemen‐92 yielded best (1468.2 kg ha^?1, 1483.0 kg ha^?1, and 1484.7 kg ha^?1, respectively) at 1 kg B ha^?1. Interestingly, Gökçe reached to the highest level of grain yield (1827.1 kg ha^?1) at the control. Gökçe was a B deficiency B tolerance genotype. The other genotypes appeared to have high sensitivity to B deficiency. This study showed that B deficiency could result in significant yield losses in chickpea under the experimental conditions tested. Thus, B contents of soils for the cultivation of chickpea should be analyzed in advance to avoid yield losses.     

Efficacy of starter N fertilizer and rhizobia inoculant in dry pea (Pisum sativum Linn.) production in a semi-arid temperate environment

ABSTRACT

Uncertainties exist about the importance of rhizobia inoculant and starter nitrogen (N) application in dry pea (Pisum sativum L.) production. Three field experiments were conducted to evaluate how rhizobia inoculant and starter N fertilizer affect pea seed yield and protein concentration in a semi-arid environment in central Montana. Commercial rhizobia inoculant was mixed with seed prior to planting at the manufacturer’s recommended rate. Starter N fertilizers were applied into the same furrow as seed at 0, 22, 44 and 88 kg ha^?1 as urea, slow-release polymer-coated N fertilizer (ESN), and a combination of both. The application of rhizobia inoculant had no or a very small beneficial effect on pea yield in lands with a previous history of peas. In a land without pea history, application of rhizobia increased pea seed yield by 16%. The positive effect of starter N was only pronounced when initial soil N was low (≤ 10 kg ha^?1 nitrate-nitrogen), which increased net return by up to US$ 42 ha^?1. In this condition, application of slow-release N outperformed urea. However, application of starter N (especially with urea) had a negative effect on pea establishment, vigor and seed yield when soil initial N was high (≥ 44 kg ha^?1 NO₃-N). The results indicate that the rate, placement and form of the starter N must be optimized to benefit pea yield and protein without detrimental effects on germination and nodulation. Moreover, application of starter N must be guided by the soil nitrate content.     

Biochar and inorganic nitrogen fertilizer effects on maize (Zea mays L.) nitrogen use and yield in moist semi-deciduous forest zone of Ghana

Abstract

Maize (Zea mays L.) is a major nitrogen consuming crop, as nitrogen is considered as an important determinant of its grain yield. Though inorganic fertilizer is widely recommended, the problem of high cost and inaccessibility limit its usage by resource poor farmers. Biochar application provides a new technology for both soil fertility and crop productivity improvement. With limited research on the suitability of biochar for soil improvement practices in Ghana, our objective was to determine the synergistic effect of biochar and inorganic fertilizer on the nitrogen uptake, nitrogen use efficiency, and yield of maize. Field experiment was conducted in Ghana, KNUST, in the major and minor raining seasons. Biochar was applied at 0, 5, 10, 15, and 20 t ha^?1 and fertilizer N applied at 0, 45, and 90?kg ha^?1. The results showed significantly (p??1 supplemented with 45?kg N ha^?1 increased N uptake by 200%, and grain yield by 213% and 160% relative to the control in the minor and major rainy seasons, respectively. The greater yield of maize recorded on biochar-amended soils was attributed to the improved N uptake and nitrogen use efficiency. In conclusion, our finding suggests that the application of combined biochar and inorganic N fertilizer is not only ecologically prudent, but economically viable and a practicable alternative to current farmers’ practice of cultivating maize in Ghana.     

Mitigation options for N2O emission from a corn field in Kalimantan,Indonesia

Abstract

Field experiments were designed to quantify N₂O emissions from corn fields after the application of different types of nitrogen fertilizers. Plots were established in South Kalimantan, Indonesia, and given either urea (200 kg ha^?1), urea (170 kg ha^?1) + dicyandiamide ([DCD] 20 kg ha^?1) or controlled-release fertilizer LP-30 (214 kg ha^?1) prior to the plantation of corn seeds (variety BISI 2). Each fertilizer treatment was equivalent to 90 kg N ha^?1. Plots without chemical N fertilizer were also prepared as a control. The field was designed to have three replicates for each treatment with a randomized block design. Nitrous oxide fluxes were measured at 4, 8, 12, 21, 31, 41, 51, 72 and 92 days after fertilizer application (DAFA). Total N₂O emission was the highest from the urea plots, followed by the LP-30 plots. The emissions from the urea + DCD plots did not differ from those from the control plots. The N₂O emission from the urea + DCD plots was approximately one thirtieth of that from the urea treatment. However, fertilizer type had no effect on grain yield. Thus, the use of urea + DCD is considered to be the best mitigation option among the tested fertilizer applications for N₂O emission from corn fields in Kalimantan, Indonesia.     

Maize Yield Response to Zinc Sources and Effectiveness of Diagnostic Indicators

Maize yield is often limited by zinc (Zn) deficiency. The objectives of this study were to (i) evaluate maize yield response to Zn applied at four different rates, (ii) evaluate the yield response and agronomic efficiency of maize to the application of a complex fertilizer, MicroEssentials SZ (12N–40P–0K–10S–1Zn), compared to different rates of monoammonium phosphate (MAP) + ammonium sulfate (AS) + zinc sulfate (ZnSO4), and (iii) evaluate the association between tissue Zn concentration and soil-test Zn with the maize response to Zn fertilizer. Eleven experiments were carried out during the 2010, 2011, and 2012 growing seasons throughout eight states in the USA. Treatments consisted of four Zn rates of a physical blend of MAP + AS + ZnSO₄ (0, 2.24, 4.48, 6.72, and 11.2 kg/ha Zn) and MicroEssentials SZ at a Zn rate of 2.24 kg/ha Zn. Nitrogen, phosphorus (P), and sulfur (S) rates were balanced across treatments (40 kg/ha P, 22 kg/ha S) and fertilizers were broadcast and incorporated immediately prior to planting. Treatment and location main effects were significant (P < 0.001) on corn yields, whereas the interaction treatment × location was not (P = 0.33). Maize responded positively to Zn fertilization; average yields across locations increased from 10,540 kg ha^?1 without Zn to 11,530 kg ha^?1 with 11.21 kg Zn ha^?1 applied as a physical blend. The yield response and Zn agronomic efficiency of maize with the application of the complex fertilizer at a rate of 2.24 kg Zn ha^?1 averaged 1004 kg ha^?1 and 448 kg maize kg Zn^?1, respectively, significantly higher (P < 0.1) than the yield response and Zn agronomic efficiency with the application of a physical blend with the same Zn rate, which averaged 293 kg ha^?1 and 131 kg maize kg Zn^?1, respectively. The Zn concentration in plant tissue of unfertilized plots varied greatly and was not related to the maize response to Zn fertilizer (r = 0.01; P = 0.98). With respect to soil Zn, a negative but nonsignificant relationship was found between maize response to Zn fertilizer and soil-test Zn (r = ?0.51; P = 0.16).