Which crop and which drop,and the scope for improvement of water productivity

The information provided in publications on water-related agronomic trials and irrigation interventions is often too limited to compare values of water productivity (WP), i.e. the ratio between produced plant biomass and the amount of water used for that production, from different years, regions, etc. in a meaningful way. In this article, we show with the help of simulation models how WP-values are affected by different definitions of the numerator and denominator, environmental circumstances, such as climate, year and sowing date, and crop characteristics. In many cases, this resulted in 10–25% change in the WP-values, and sometimes even more. A minimum dataset is formulated that will make normalization and comparison of different WP-values easier. Most of these data are known by those who execute experiments, and we recommend strongly that these are reported in the future. Simulation models are excellent tools to explore the limitations and opportunities for increasing WP, provided they are well calibrated and validated for biomass, soil water availability, and ET. Such a balanced estimation of the “crop” and the “drop” requires an improved cooperation between hydrologists and agronomists. Comparison of actual WP_(E)T and simulated maximum WP_(E)T for the same environmental conditions does show the scope for increasing WP_(E)T and other WP-values. Since WP-values are ratios, the production level on a hectare basis should be given besides WP. When we try to find an optimum combination of production per hectare and production per m³ irrigation water, we will be able to produce “more food with less water”.     

Yield and water productivity of rice as affected by time of transplanting in Punjab, India

Early planting of rice crop during the period of peak evaporative demand results in substantial mining of ground water and threats the sustainability of rice production in Punjab, northwest India. In order to increase yield and water productivity, arrest the mining of ground water, and achieve sustainability of rice production, there is need to adopt water-saving management practices. The present investigation in the Indian Punjab was aimed at investigating the effect of date of transplanting in four rice cultivars varying in growth duration (short-duration RH-257 and PR-115, and medium-duration PR-113 and PAU-201) on yield and water productivity. Delaying in transplanting from 15 June to 25 June or 5 July resulted in reduction in mean grain yield of the four cultivars by 7.2% and 15.9%, respectively. PAU-201, a photoperiod-sensitive cultivar, had higher mean grain yield (7.8 t ha⁻¹) by 14.1%, 12.8% and 11.5% over the photoperiod-insensitive cultivars, PR-113, PR-115 and RH-257, respectively. Irrespective of transplanting dates, short-duration cultivars, RH-257 and PR-115, respectively, resulted in 18.9% and 16.6% saving of water, as compared to medium-duration cultivar PR-113. With delayed transplanting after 15 June, both yield and water productivity decreased for all photoperiod insensitive cultivars, but yields remained statistically similar and water productivity greater for a photoperiod sensitive cultivar. Mean irrigation water productivity (WP_I) was highest for 15 June transplanting (0.66 kg m⁻³) and lowest for 5 July transplanting (0.57 kg m⁻³), and was highest for RH-257 (0.68 kg m⁻³) and lowest for PR-113 (0.50 kg m⁻³). Total water productivity (WP_I+R; irrigation plus rainfall) decreased by 9.1% for 5 July transplanting compared with 15 June transplanting, and was highest for RH-257 (0.49 kg m⁻³) and lowest for PR-113 (0.38 kg m⁻³). Real crop water productivity (WP_ET) of the photoperiod insensitive cultivars decreased (1.10-1.40 kg m⁻³), but that of a photoperiod sensitive cultivar increased (1.63 kg m⁻³), with delayed transplanting. We conclude that substantial amount of water can be saved and yield increased by transplanting short-duration cultivars during the period of peak evaporative demand, or water saved and yield maintained by transplanting a photoperiod-sensitive cultivar late in the season when the evaporative demand is low.     

Evaluating the Crop Water Stress Index and its correlation with latent heat and CO2 fluxes over winter wheat and maize in the North China plain

Plant water status is a key factor impacting crop growth and agricultural water management. Crop water stress may alter canopy temperature, the energy balance, transpiration, photosynthesis, canopy water use efficiency, and crop yield. The objective of this study was to calculate the Crop Water Stress Index (CWSI) from canopy temperature and energy balance measurements and evaluate the utility of CWSI to quantify water stress by comparing CWSI to latent heat and carbon dioxide (CO₂) flux measurements over canopies of winter wheat (Triticum aestivum L.) and summer maize (Zea mays L.). The experiment was conducted at the Yucheng Integrated Agricultural Experimental Station of the Chinese Academy of Sciences from 2003 to 2005. Latent heat and CO₂ fluxes (by eddy covariance), canopy and air temperature, relative humidity, net radiation, wind speed, and soil heat flux were averaged at half-hour intervals. Leaf area index and crop height were measured every 7 days. CWSI was calculated from measured canopy-air temperature differences using the Jackson method. Under high net radiation conditions (greater than 500 W m⁻²), calculated values of minimum canopy-air temperature differences were similar to previously published empirically determined non-water-stressed baselines. Valid measures of CWSI were only obtained when canopy closure minimized the influence of viewed soil on infrared canopy temperature measurements (leaf area index was greater than 2.5 m² m⁻²). Wheat and maize latent heat flux and canopy CO₂ flux generally decreased linearly with increases in CWSI when net radiation levels were greater than 300 W m⁻². The responses of latent heat flux and CO₂ flux to CWSI did not demonstrate a consistent relationship in wheat that would recommend it as a reliable water stress quantification tool. The responses of latent heat flux and CO₂ flux to CWSI were more consistent in maize, suggesting that CWSI could be useful in identifying and quantifying water stress conditions when net radiation was greater than 300 W m⁻². The results suggest that CWSI calculated by the Jackson method under varying solar radiation and wind speed conditions may be used for irrigation scheduling and agricultural water management of maize in irrigated agricultural regions, such as the North China Plain.     

Effect of plant development on turbulent fluxes of a screenhouse banana plantation

This study focuses on CO₂ and water vapor flux measurements, water use efficiency estimates and evapotranspiration modeling during the course of growth of a young banana crop in a screenhouse in northern Israel. An eddy covariance system was deployed at the center of the screenhouse during two growth periods of the banana crop: small and large plants. Results show that daily whole canopy evapotranspiration increased during the measurement period from 2.2 mm day^?1 for the smaller plants to 3.4 mm day^?1 for the larger plants. The increase in net daily CO₂ consumption doubled during the same period, from about 11 to 21.5 g m^?2 day^?1 per unit ground area. Water vapor and CO₂ fluxes per unit leaf area were independent of plant size and averaged with 51 and 0.29 g m^?2 day^?1, respectively. Consequently, water use efficiency, defined as the ratio between net vertical fluxes of CO₂ and water vapor, was nearly constant during growth of the plants. Evapotranspiration models provided more accurate predictions for larger than for smaller plants. This was due to inadequate treatment of the partial cover of young plants, which could be overcome by the use of a crop coefficient. A modified Penman–Monteith evapotranspiration model adapted to the screenhouse environment, applied here for the first time to a banana screenhouse, was in better agreement with the measurements than an open canopy model.     

Application of a new method to evaluate crop water stress index

Optimum water management and irrigation require timely detection of crop water condition. Usually crop water condition can be indicated by crop water stress index (CWSI), which can be estimated based on the measurements of either soil water or plant status. Estimation of CWSI by canopy temperature is one of them and has the potential to be widely applied because of its quick response and remotely measurable features. To calculate CWSI, the conventional canopy-temperature-based model (Jackson’s model) requires the measurement or estimation of the canopy temperature, the maximum canopy temperature (T _cu), and the minimum canopy temperature (T _cl). Because extensive measurements are necessary to estimate T _cu and T _cl, its application is limited. In this study, by introducing the temperature of an imitation leaf (a leaf without transpiration, T _p) and based on the principles of energy balance, we studied the possibility to replace T _cu by T _p and reduce the included parameters for CWSI calculation. Field experiments were carried out in a winter wheat (Triticum aestivum L.) field in Luancheng area, Hebei Province, the main production area of winter wheat in China. Six irrigation treatments were established and soil water content, leaf water potential, soil evaporation rate, plant transpiration rate, biomass, yield, and regular meteorological variables of each treatment were measured. Results indicate that the values of T _cu agree with the values of T _p with a regression coefficient r=0.988. While the values of CWSI estimated by the use of T _p are in agreement with CWSI by Jackson’s method, with a regression coefficient r=0.999. Furthermore, CWSI estimated by the use of T _p has good relations with soil water content and leaf water potential, showing that the estimated CWSI by T _p is a good indicator of soil water and plant status. Therefore, it is concluded that T _cu can be replaced by T _p and the included parameters for CWSI calculation can be significantly reduced by this replacement.     

The effects of applied water at various fractions of measured evapotranspiration on reproductive growth and water productivity of Thompson Seedless grapevines

The reproductive growth and water productivity (WP_b) of Thompson Seedless grapevines were measured as a function of applied water amounts at various fractions of measured grapevine ET_c for a total of eight irrigation treatments. Shoots were harvested numerous times during the growing season to calculate water productivity. Berry weight was maximized at the 0.6–0.8 applied water treatments across years. As applied water amounts increased soluble solids decreased. Berry weight measured at veraison and harvest was a linear function of the mean midday leaf water potential measured between anthesis and veraison and anthesis and harvest, respectively. As applied water amounts increased up to the 0.6–0.8 irrigation treatments there was a significant linear increase in yield. Yields at greater applied water amounts either leveled off or decreased. The reduction in yield on either side of the yearly maximum was due to fewer numbers of clusters per vine. Maximum yield occurred at an ET_c ranging from 550 to 700 mm. Yield per unit applied water and WP_b increased as applied water decreased. The results from this study demonstrated that Thompson Seedless grapevines can be deficit irrigated, increasing water use efficiency while maximizing yields.     

Evapotranspiration and water use of full and deficit irrigated cotton in the Mediterranean environment in northern Syria

Cotton (Gossypium hirsutum L.) is the most important industrial and summer cash crop in Syria and many other countries in the arid areas but there are concerns about future production levels, given the high water requirements and the decline in water availability. Most farmers in Syria aim to maximize yield per unit of land regardless of the quantity of water applied. Water losses can be reduced and water productivity (yield per unit of water consumed) improved by applying deficit irrigation, but this requires a better understanding of crop response to various levels of water stress. This paper presents results from a 3-year study (2004-2006) conducted in northern Syria to quantify cotton yield response to different levels of water and fertilizer. The experiment included four irrigation levels and three levels of nitrogen (N) fertilizer under drip irrigation. The overall mean cotton (lint plus seed, or lintseed) yield was 2502 kg ha⁻¹, ranging from 1520 kg ha⁻¹ under 40% irrigation to 3460 kg ha⁻¹ under 100% irrigation. Mean water productivity (WP_ET) was 0.36 kg lintseed per m³ of crop actual evapotranspiration (ET_c), ranging from 0.32 kg m⁻³ under 40% irrigation to 0.39 kg m⁻³ under the 100% treatment. Results suggest that deficit irrigation does not improve biological water productivity of drip-irrigated cotton. Water and fertilizer levels (especially the former) have significant effects on yield, crop growth and WP_ET. Water, but not N level, has a highly significant effect on crop ET_c. The study provides production functions relating cotton yield to ET_c as well as soil water content at planting. These functions are useful for irrigation optimization and for forecasting the impact of water rationing and drought on regional water budgets and agricultural economies. The WP_ET values obtained in this study compare well with those reported from the southwestern USA, Argentina and other developed cotton producing regions. Most importantly, these WP_ET values are double the current values in Syria, suggesting that improved irrigation water and system management can improve WP_ET, and thus enhance conservation and sustainability in this water-scarce region.     

Water productivity analysis of irrigated crops in Sirsa district,India

Water productivity (WP) expresses the value or benefit derived from the use of water, and includes essential aspects of water management such as production for arid and semi-arid regions. A profound WP analysis was carried out at five selected farmer fields (two for wheat–rice and three for wheat–cotton) in Sirsa district, India during the agricultural year 2001–02. The ecohydrological soil–water–atmosphere–plant (SWAP) model, including detailed crop simulations in combination with field observations, was used to determine the required hydrological variables such as transpiration, evapotranspiration and percolation, and biophysical variables such as dry matter or grain yields. The use of observed soil moisture and salinity profiles was found successful to determine indirectly the soil hydraulic parameters through inverse modelling.Considerable spatial variation in WP values was observed not only for different crops but also for the same crop. For instance, the WP_ET, expressed in terms of crop grain (or seed) yield per unit amount of evapotranspiration, varied from 1.22 to 1.56 kg m⁻³ for wheat among different farmer fields. The corresponding value for cotton varied from 0.09 to 0.31 kg m⁻³. This indicates a considerable variation and scope for improvements in water productivity. The average WP_ET (kg m⁻³) was 1.39 for wheat, 0.94 for rice and 0.23 for cotton, and corresponds to average values for the climatic and growing conditions in Northwest India. Including percolation in the analysis, i.e. crop grain (or seed) yield per unit amount of evapotranspiration plus percolation, resulted in average WP_ETQ (kg m⁻³) values of 1.04 for wheat, 0.84 for rice and 0.21 for cotton. Factors responsible for low WP include the relative high amount of evaporation into evapotranspiration especially for rice, and percolation from field irrigations. Improving agronomic practices such as aerobic rice cultivation and soil mulching will reduce this non-beneficial loss of water through evaporation, and subsequently will improve the WP_ET at field scale. For wheat, the simulated water and salt limited yields were 20–60% higher than measured yields, and suggest substantial nutrition, pest, disease and/or weed stresses. Improved crop management in terms of timely sowing, optimum nutrient supply, and better pest, disease and weed control for wheat will multiply its WP_ET by a factor of 1.5! Moreover, severe water stress was observed on cotton (relative transpiration < 0.65) during the kharif (summer) season, which resulted in 1.4–3.3 times lower water and salt limited yields compared with simulated potential yields. Benefits in terms of increased cotton yields and improved water productivity will be gained by ensuring irrigation supply at cotton fields, especially during the dry years.     

Yield and growth responses of kenaf (Hibiscus cannabinus L.) in a semi-arid tropical environment to irrigation regimes based on leaf water potential

Summary The growth response of kenaf (Hibiscus cannabinus L.) to four irrigation schedules based on leaf water potential _l was evaluated in a semi-arid tropical environment. Total dry matter production was unaffected by regimes in which the mean value of leaf water potential _l (mean of solar noon and dawn value) did not fall below –1.26 MPa. Stem elongation was more sensitive than dry matter accumulation to plant water stress. — The economic yield for paper pulp production (i. e. total plant dry matter production minus that of the foliage and upper 60 cm of stem) increased with the frequency of irrigation. — Growth recovery by kenaf following a period of water stress was examined. Alleviation of water stress 10 weeks after irrigation, when _l was –1.60 MPa, produced stem elongation rates that were greater than those of plants previously receiving irrigation. This ability to withstand water stress and partially compensate in growth following alleviation of the stress indicates that the kenaf crop has stress response features suitable for rainfall only production under semi-arid tropical conditions. — Irrigation schedules based on _l resulted in water applications tailored to crop requirements in that water use increased, and the time interval between irrigation decreased, with increasing canopy development as well as with increasing evaporative demand. However, erratic fluctuations in _l between irrigations make scheduling by this method difficult and the use of daily mean, dawn or noon values of _l for scheduling irrigation of kenaf cannot be recommended in environments of high evaporative demand. The factors contributing to these fluctuations in (_l) are discussed.     

Water pillow irrigation compared to furrow irrigation for soybean production in a semi-arid area

Field studies were done in 2003 and 2006 to evaluate the performance of water pillow (WP) irrigation as an alternative to furrow irrigation (FI) for soybean growth in semi-arid climatic conditions. There were four irrigation treatments: two of which (FI and WP_1.0) were full irrigation, in that the water deficit in the soil profile (0.9 m) was brought to field capacity in 10-day intervals. The other two treatments (WP_0.75 and WP_0.50) were deficit irrigation treatments, and received 75% and 50% of WP_1.0 irrigation amount. The highest seed yield was achieved with the WP_1.0 treatment. Irrigation water use efficiency (IWUE) and water use efficiency (WUE) were influenced significantly by the irrigation methods and levels (P ≤ 0.05). The highest values of WUE and IWUE were obtained by the WP_0.75 and WP_0.50 treatment, respectively, in both study years. However, the smallest irrigation amount resulted in lower total yield for the WP_0.50 treatment, and is not recommended. In conclusion, the WP_0.75 treatment is recommended for soybean production in order to attain higher values of IWUE and WUE, and to conserve water and maximize yield with the same volume of water.     

Effects of EC-based irrigation scheduling and CO2 enrichment on water use efficiency of a greenhouse cucumber crop

An EC-based irrigation strategy was tested in two greenhouse soilless cucumber crops grown under the autumn-winter conditions of the Mediterranean area. One of the crops was subjected to CO₂ enrichment using a dynamic control strategy, while the other one was not enriched. Fresh yield of the CO₂-enriched crop was 19% higher than of the non-enriched one, while crop water uptake was not significantly different between the two treatments, implying that the corresponding increase in water use efficiency, calculated on the basis of crop water uptake, was through increased growth and yield, not through reduction in water uptake and transpiration. The overall water use efficiency, based on the amount of applied water, was found to be about 40% higher in the CO₂-enriched greenhouse due to the combined effect of (i) the greater biomass production for the same amount of transpired water and (ii) the lower leaching fraction in the enriched crop compared with the reference one. The latter effect could be ascribed to the higher mineral acquisition of the enriched crop. It is concluded that CO₂ enrichment combined to an EC-based irrigation scheduling lead to synergistic beneficial effects on the overall water use efficiency of soilless greenhouse cropping systems and to a drastic reduction of the leaching fraction.     

Evapotranspiration of horticultural crops in an unheated plastic greenhouse

Large unheated greenhouse areas are located in the coastal lands of the Mediterranean Basin, based on low-cost structures covered with plastic. Water is a scarce resource in these areas and therefore it is necessary to optimise irrigation practice by applying the crop water needs, thus avoiding waste. This work was undertaken to determine the water requirements of four major horticultural crops grown in an unheated plastic greenhouse located in Almería, Spain.Drainage lysimeters were used to determine the seasonal evapotranspiration (ET) of four crops (melon, green beans, watermelon and pepper), which ranged from 170 to 371 mm and it was associated with the reference ET (ET₀). Compared to irrigated crops outdoors, the seasonal ET of the greenhouse horticultural crops is relatively low due to the lower evaporative demand inside the greenhouse and to a further reduction in solar radiation transmission by whitening in late spring and summer. Additionally, off-season greenhouse crops are grown during low evaporative demand periods, thus the low water requirements.Crop coefficient (K_c) curves were obtained for the four crops under different conditions. The K_c values varied with the crop, stage of development, and with management practices. Measured peak K_c values for crops, which were not vertically supported (melon and watermelon) were between 1 and 1.1, similar to the measured values for the same crops under field conditions. By contrast, peak K_c values for vertically supported (VS) crops (melon, green bean and sweet pepper) varied between 1.3 and 1.4, which are higher than those reported for outdoors. The tall and open canopy structures of the VS greenhouse crops, their high leaf area indices, along with the high proportion of diffuse radiation inside the greenhouse, allowed for more uniform light penetration within the canopies and ET rates in those crops higher than those of the short, non-supported crops.Management and climatic conditions combined to define an unusual K_c curve for sweet pepper. The crop is transplanted in late summer and reaches the peak K_c in early winter. Because of the low temperatures, K_c decreased thereafter down to about 1.0, until climatic conditions inside the greenhouse improved. From late winter to the end of the season, K_c was either stable or increased steadily. A simple K_c model based on thermal time for greenhouse crops with and without pruning, was proposed and validated. The model gave accurate estimates of measured K_c values for melon and pepper.     

Canopy-air temperature of crops grown under different irrigation regimes in a temperate humid climate

Summary Canopy temperatures of wheat, barley, rape and perennial rye grass crops, grown under temperate humid climatic conditions at different irrigation regimes were measured during two growing seasons, 1986 and 1987, by determining the emission of radiation in the wavelength interval 8<<14 m. Global radiation, net radiation, air temperature, relative humidity and wind speed were measured simultaneously. The canopy temperature of the crops either fully irrigated or under water stress fluctuated up to 6 °C within a few minutes in response to rapid changes in global radiation. At high level of global radiation (800–1000 W m^–2) canopy-air temperature differences up to 8 °C were measured whereas at low level of global radiation (100–200 W m^–2) canopy-air temperature differences were found to approach zero or become negative even at severe crop water stress. Canopy temperature differences between water stressed and fully irrigated crops up to 6 °C were measured under conditions of high evaporative demand whereas under conditions of low evaporative demand canopy temperature differences between water stressed and fully irrigated crops approached zero even at severe crop water stress. For each crop the lower base line, i.e. the relationship between canopy-air temperature difference and vapor pressure deficit for a fully irrigated crop, was estimated by linear regression. In most cases a poor correlation was obtained which is attributed to considerable temporal variability in global radiation and wind speed and to the narrow range of prevailing values of vapor pressure deficit. However, from the base line for rape and barley it was possible to calculate apparent values of the aerodynamic resistance and the crop resistance which were of the same order of magnitude as those found for other crops by using this method under more arid climatic conditions.     

CORNMOD,a dynamic simulator of corn production

Aftern an extensive literature search, CORNMOD, a comprehensive mathematical model that simulates energy and gas exchange at the plant-air interface, was developed. Predictions of profiles (CO₂ concentration, water vapour, temperature, light, photosynthesis) in the canopy were biologically good enough for many applications, but they revealed the inadequacies in our understanding of the environment within the plant canopy.Also considered were spring and fall tillage and harvest operations. After calculating several spring freeze-thaw periods for the test year, 1969, enough work days were accumulated to complete tillage operations, allowing completion of planting by 12 May. Two 63 hp tractors and associated equipment were used to farm the 81 ha hypothetical farmstead used for test purposes. Without this large investment in equipment, planting date would have been delayed until late June or early July since the spring of 1969 was very wet.The simulated crop was grown under actual 1969 weather conditions. On 4 September the corn crop reached harvest maturity as gauged by a GDD (Growing Degree Day) ‘clock’. The simulator predicted a yield of 7368 kg/ha. This was a gross over-prediction of the 4088 kg/ha average reported for 1969 in central Missouri. This over-prediction was accounted for by the ideal conditions given the simulator when actual data were not available. This included leaf angles, CO₂ concentration, and stomatal resistance.Harvesting took 30 days to complete, using one four-row sheller, two trucks, a farm elevator, and 127 272 kg of storage capacity. It appered that the farm dryer was the limiting piece of equipment in the harvesting operation.This crop production simulator forms the basic framework that can eventually analyse more complex systems. However, at this point, the simulator is only in the initial stages of development, and it should be realised that much more extensive development is necessary before the ultimate simulator is achieved.     

Effects of elevated CO2 concentration,irrigation and nitrogenous fertilizer application on the growth and yield of spring wheat in semi-arid areas

In this paper, we discuss the effect of elevated CO₂ concentration, irrigation and nitrogenous fertilizer application on the growth and yield of spring wheat in semi-arid areas. A field experiment was conducted at the Dingxi Agricultural Experiment Station during 2000–2002. According to the experimental design, the CO₂ concentration increased to 14.5, 40 and 54.5 μmol mol⁻¹, respectively, by NH₄HCO₃ (involving CO₂) application, direct application of CO₂ gas and combination of fertilizer NH₄HCO₃ plus CO₂ application, which are equal to CO₂ concentration of the Earth's atmosphere in the next 5, 15 and 20 years. The fertilizer application was divided into three levels: application of NH₃NO₃ (250 kg h m⁻²), NH₄HCO₃ (500 kg h m⁻²) and no fertilizer. Irrigation was divided into two levels: with 90 mm irrigation in the growth period and without irrigation. They can be combined as eight treatments. Each treatment was replicated three times. The results showed that elevated CO₂ concentration owing to CO₂ application leads to remarkable increase in leaf area index (LAI) and shoot biomass, and also generates the higher value of leaf area duration (LAD) that can benefit the photosynthesis in the growth stage and yield increase in crop compared than the no CO₂ application treatment. When CO₂ concentration elevated by 14.5, 40 and 54.5 μmol mol⁻¹ with irrigation and fertilization, correspondingly, the grain yield increased by 6.3, 13.1 and 19.8%, respectively, whereas without irrigation and fertilization, the grain yield increased by only 4.2% when CO₂ concentration increased to 40 μmol mol⁻¹. Meanwhile, irrigation and fertilization can result in larger and deeper root system and have significantly positive influences on higher value of root/shoot (R/S) and water use efficiency. The grain yields in irrigation, irrigation plus NH₃NO₃ application and irrigation plus application of NH₄HCO₃ treatments are 73.4, 148.0 and 163.6% higher than that of no-irrigated and no-fertilized treatment, suggesting that both irrigation and fertilizer application contribute to remarkable increase of crop yield. In all treatments, the highest water use efficiency (WUE, 7.24 kg h m⁻² mm⁻¹) and grain yield (3286 kg h m⁻²) consistently occurred in the treatment with 90 mm irrigation plus fertilizer NH₄HCO₃ and elevated CO₂ concentration (54.5 μmol mol⁻¹), suggesting that this combination has an integrated beneficial effect on improving WUE and grain yield of spring wheat. These results may offer help to maintain and increase the crop yields in semi-arid areas.     

Effects of rising atmospheric CO2 on crop evapotranspiration in a Mediterranean area

In the assessment of plant response to the climate changes, the effects of CO₂ increase in the atmosphere and the subsequent rise of temperatures must be taken into account for their effects on crop physiology. In Mediterranean areas, a decrease of water availability and a more frequent occurrence of drought periods are expected. The objective of this study was to assess the impact of elevated CO₂ concentration and high temperature on reference evapotranspiration (ETo) and crop evapotranspiration (ETc) in the Mediterranean areas. The Penman-Monteith equation was used to simulate the future changes of reference evapotranspiration (ETo) by the recalibration of the canopy resistance parameter. Besides, crop coefficients (Kc) were adjusted according to the future climate trend. Then the modified empirical model (ETc = ETo × Kc) was applied providing an effective quantification of the climate change impact on water use of irrigated crops grown in Mediterranean areas. In the studied area, water use assessment was carried out for the period from 1961 to 2006 (measured data) and for a period from 2071 until 2100 (simulated data), showing a future climatic scenario. Water and irrigation use of crops will change as a function of climate changes, thermal needs of single crops and time of the year when they grow. Climate simulation model foresees the tendency for a significant increase of temperatures and a decrease of total year rainfall with a change of their distribution. The temperature increase and the concomitant expected rainfall decrease lead to a rise of year potential water deficit. About the autumn-spring crops, as wheat, a further increase of water deficit, is not expected. On the contrary, for spring-summer crops as tomato, a significant increase of water deficit and thus of irrigation need, is foreseen. Actually, for crops growing in that period of the year, the substantial rise of evapotranspiration demand cannot be compensated by crop cycle reduction and partial stomatal closure.     

Evapotranspiration and crop coefficients of irrigated biomass sorghum for energy production

New cultivars of sorghum for biomass energy production are currently available. This crop has a positive energy balance being irrigation water the largest energy consumer during the growing cycle. Thence, it is important to know the biomass sorghum water requirements, in order to minimize irrigation losses, thus saving water and energy. The objective of this study was to quantify the water use and crop coefficients of irrigated biomass sorghum without soil water limitations during two growing seasons. A weighing lysimeter located in Albacete (Central Spain) was used to measure the daily biomass sorghum evapotranspiration (ET_c) throughout the growing season under sprinkler irrigation. Seasonal lysimeter ET_c was 721 mm in 2007 and 691 mm in 2010. The 4 % higher ET_c value in 2007 was due to an 8 % higher evaporative demand in that year. Maximum average K _c values of 1.17 in 2007 and 1.21 in 2010 were reached during the mid-season stage. The average K _c values for the 2 years of study were K _c-ini: 0.64 and K _c-mid: 1.19. The seasonal evaporation component was estimated to be about 18 % of ET_c. The average basal K _c (K _cb) values for the two study years were K _cb-ini: 0.11 and K _cb-mid: 1.17. The good linear relationship found between K _cb values and the fraction of ground cover (f _c) and the excellent agreement found between Normalized Difference Vegetation Index and different biophysical parameters, such as K _cb and f _c, will allow monitoring and estimating the spatially distributed water requirements of biomass sorghum at field and regional scales.     

SEBAL for detecting spatial variation of water productivity and scope for improvement in eight irrigated wheat systems

A methodology has been developed to quantify spatial variation of crop yield, evapotranspiration (ET) and water productivity (WP_ET) using the SEBAL algorithm and high and low resolution satellite images. SEBAL-based ET estimates were validated over an irrigated, wheat dominated area in the Yaqui Valley, Mexico and proved to be accurate (8.8% difference for 110 days). Estimated average wheat yields in Yaqui Valley of 5.5 t ha⁻¹ were well within the range of measured yields reported in the literature. Measured wheat yields in 24 farmers’ fields in Sirsa district, India, were 0.4 t ha⁻¹ higher than SEBAL estimated wheat yields. Area average WP_ET in the Yaqui Valley was 1.37 kg m⁻³ and could be considered to be high as compared to other irrigated systems around the world where the same methodology was applied. A higher average WP_ET was found in Egypt's Nile Delta (1.52 kg m⁻³), Kings County (CA), USA (1.44 kg m⁻³) and in Oldambt, The Netherlands (1.39 kg m⁻³). The spatial variability of WP_ET within low productivity systems (CV = 0.33) is higher than in high productivity systems (CV = 0.05) because water supply in the former case is uncertain and farming conditions are sub-optimal. The high CV found in areas with low WP_ET indicates that there is considerable scope for improvement. The average scope for improvement in eight systems was 14%, indicating that 14% ET reduction can be achieved while maintaining the same yield. It is concluded that the proposed methodology is accurate and that better knowledge of the spatial variation of WP_ET provides valuable information for achieving local water conservation practices in irrigated wheat.     

Estimation of evapotranspiration,transpiration ratio and water-use efficiency from a sparse canopy using a compartment model

Using the Shuttleworth and Wallace (S–W) model, evapotranspiration (ET); transpiration ratio (T/ET), which is the ratio of transpiration (T) to ET; and water-use efficiency (WUE) were estimated for a sparsely planted sorghum canopy that was well irrigated. That model is designed to estimate separately the evaporation from soil and transpiration from crops.The evapotranspiration estimates for both short- and long-term measurement periods coincided closely with the Bowen ratio energy balance (BREB) measurements. The transpiration ratios were affected by the canopy resistances and the soil surface resistances during the day. The regression curve between leaf area index (LAI) and transpiration ratio suggests that LAI, less than 1.6, determined the transpiration ratio in the absence of water stresses by soil water drought and extreme weather condition. The WUEs for transpiration (WUEt) and evapotranspiration (WUEet), which are the total dry matter (TDM) production for 1 kg T and ET, reached the peaks of 9.0 and 4.5 g kg⁻¹ H₂O, respectively, in the end of July when the total dry matter increasing rate was greatest. These two WUEs degraded to less than zero in the end of August when the plant biomass decreased due to drying and death. The WUEs are largely affected by the TDM seasonal increment rate.Thus, in a sparse crop, the crop growth properties (i.e. LAI and TDM increment) mainly determine the crop water uses (i.e. the transpiration ratio and water-use efficiency) in the absence of water stresses.     

Interaction of applied water amounts and leaf removal in the fruiting zone on grapevine water relations and productivity of Merlot

A study was conducted in the San Joaquin Valley of California on Merlot to determine the interaction of applied water amounts [at 0.4, 0.8, and 1.2 of estimated vineyard evapotranspiration (ET_c)] and leaf removal (at berry set or veraison) in the fruiting zone on productivity. Shaded area was measured beneath the canopy of the 1.2 irrigation treatment at solar noon throughout the study to provide an estimate of seasonal crop coefficients (K _c). Vine water status was assessed across treatments and years by measuring midday leaf water potential (Ψ_l). The maximum K _c determined from the percent shaded area was 0.7 at the row spacing of 3.66?m and canopy type that developed a “California Sprawl.” Irrigation treatment had a significant effect on midday Ψ_l and no such effect for leaf removal. Clusters exposed to direct solar radiation had significantly higher temperatures and lower cluster Ψ than clusters in the shade. Irrigation treatment had a significant effect on berry weight, soluble solids, and titratable acidity. Yields of vines significantly increased as applied water amounts increased. In this wine grape production area, profitability is dependent upon yield. This study provided a reliable estimate of ET_c and applied water amounts to maximize yield.