Interaction of granular maize starch with lysophosphatidylcholine evaluated by calorimetry, mechanical and microscopy analysis

In this study we evaluated the thermo-mechanical properties of maize starch pastes (80% wt/wt) under the effect of exogenous lysophosphatidylcholine (LPC) using differential scanning calorimetry (DSC), dynamic mechanical spectrometry (DMS), and scanning electron microscopy (SEM). Particular attention was paid to the development of the amylose-LPC inclusion complex. Results from SEM and DSC showed that with no exogenous LPC, granular maize starch developed the amylose network structure for starch gelling at 80–95 °C. In comparison, at 1.86 and 3.35% of LPC, heating up to 130 °C was needed to develop the three-dimensional network required for starch gelling. Results showed that at these LPC concentrations LPC interacted mainly with amylose within the starch granule. At concentrations ≥8.26% the LPC interacted with amylose both inside the granule and on the granule's surface. At such LPC concentrations heating to 130 °C did not fully develop the starch network structure for gelling. These results suggested that a higher thermal stability was achieved by starch granules because of LPC inclusion complex formation. DSC or DMS did not detect the development of this complex, probably because its formation took place below the onset of gelatinization under conditions of limited molecular mobility. Subsequently, a lower level of organization (i.e. complex in form I) was achieved than in the complex developed at high temperature and water excess (i.e. complex in form II). On the other hand, the changes in the starch granule structure observed by SEM as a function of the time–temperature variable were well described by the phase shift angle (δ) rheograms for starch pastes with and without addition of LPC.     

In vitro starch digestibility and pasting properties of germinated brown rice after hydrothermal treatments

Germinated brown rice (GBR) recently has received renewed attention due to its enhanced nutritional value. Pasting properties and in vitro starch digestibility of GBR were examined before and after hydrothermal treatments. Steeping in water (30 °C, 24 h) raised the moisture content and germination percentage of brown rice. Pasting viscosity was substantially decreased but gelatinization temperatures and enthalpy were decreased only marginally by germination (30 °C, 48 h). However, annealing (50 °C, 24 h) and heat-moisture treatment (100 °C, 1 h at 30% moisture) after germination resulted in increased pasting viscosity and gelatinization temperatures. The hydrothermal treatments, however, induced browning reactions to darken the flour of GBR. The digestibility of starch in brown rice was increased by germination. The contents of rapidly digestible starch (RDS), slowly digestible starch (SDS) and resistant starch (RS) in the cooked brown rice were 47.3%, 40.8%, and 11.9%, respectively, but changed to 57.7%, 39.1%, and 3.2%, respectively upon germination. The hydrothermal treatments, however, decreased the digestibility of starch in GBR. The heat-moisture treatment decreased the RDS content in GBR near to that of native brown rice. The digestibility and physical properties of brown rice can be controlled by germination and hydrothermal treatments.     

Physicochemical properties and amylopectin fine structures of A- and B-type granules of waxy and normal soft wheat starch

This work fractionated waxy and normal wheat starches into highly purified A- and B-type granule fractions, which were representative of native granule populations within parent native wheat starches, to accurately assess starch characteristics and properties of the two granule types. Wheat starch A- and B-type granules possessed different morphologies, granule specific surface area measurements, compositions, relative crystallinities, amylopectin branch chain distributions, and physical properties (swelling, gelatinization, and pasting behaviors). Within a genotype, total and apparent amylose contents were greater for A-type granules, while lipid-complexed amylose and phospholipid contents were greater for B-type granules. B-type (relative to A-type) granules within a given genotype possessed a greater abundance of short amylopectin branch chains (DP_n < 13) and a lesser proportion of intermediate (DP_n 13–33) and long (DP_n > 33) branch chains, contributing to their lower relative crystallinities. Variation in amylose and phospholipid characteristics appeared to account for observed differences in swelling, gelatinization, and pasting properties between waxy and normal wheat starch fractions of a common granule type. However, starch granule swelling and gelatinization property differences between A- and B-type granules within a given genotype were most consistently explained by their differential amylopectin chain-length distributions.     

Modelling starch phase transitions and water uptake of rice kernels during cooking

To model the cooking processes of rice, starch gelatinization, the level of fusion of the amylose-lipid complex, and equilibrium water uptake have to be known for any given condition. Starch phase transitions were measured by DSC in two milled Korean round rice kernels whose water contents ranged from 0.18 to 4.7 g g⁻¹ db. Two to three partially overlapping transitions were assessed. Starch thermal transitions were modelled using a double step approach. First, a mechanistic double sigmoid model was fitted with DSC data for any water content value. Each parameter of the mechanistic model was then modelled with conservative empirical water content functions. In this way we obtained an explicit form of phase transition levels as a function of both temperature and water content. In parallel, the water uptake kinetics of rice kernels was determined in the temperature range of 50 °C–100 °C. Equilibrium water uptake was found to be linked to starch phase transitions and a model was built to calculate equilibrium water uptake as a function of modelled starch gelatinization and amylose-lipid complex fusion levels.     

Changes in the thermal and structural properties of maize starch during nixtamalization and tortilla-making processes as affected by grain hardness

The objective of this work was to evaluate the changes in the thermal and structural properties of maize starch during nixtamalization and the tortilla-making process and their relationship with grain hardness. Three maize types with varying hardness (hard, intermediate, soft) were processed by three nixtamalization processes (classic, traditional and ecological). Starch from the three maize types showed an A-type pattern and two endotherms corresponding to gelatinization and melting of the Type I amylose-lipid complexes. After cooking and steeping, in intermediate and soft grains the partial gelatinization and the annealing affected the starch properties and promoted the formation of amylose-lipid complexes. These effects were not observe in hard grains. The increase in melting enthalpy and the intensity of the peak 2θ∼20° from nixtamal to tortillas demonstrated the formation of amylose-lipid complexes. A third endotherm above 114 °C in some treatments of nixtamal and tortilla starch demonstrated the transformation of some amylose-lipid complexes in a most ordered structures (Type II complexes). The V-type polymorph structure found in native starch, nixtamal, and tortilla corresponds to a coexistence of Type I and Type II complexes. Formation of amylose-lipid complexes in tortillas had a partial effect on decreasing starch retrogradation (r = −0.47, P < 0.05).     

Starch gelatinization distribution and peripheral cell disruption in cooking rice grains monitored by microscopy

Starch gelatinization kinetics governs rice cooking behaviour (cooking time and texture). Starch gelatinization however occurs unevenly in the cooking grain. The aim of this study was to investigate the dynamics of starch gelatinization topography in rice kernels cooked in excess water at two temperatures: 75 °C and 95 °C, for times ranging from 5 to 30 min. Gelatinization front position was assessed over time on 40 μm cross sections using four different tracking methods: directly or after iodine staining using a microscope or a stereomicroscope under normal or polarized light. The four methods gave similar results and the obtained kinetics can be used to model starch gelatinization during grain cooking.     

Effect of heating temperature on the particle size distribution in waxy wheat flour

The particle size of waxy (amylose-reduced) wheat (Triticum aestivum L.) starch was determined at isothermal temperatures by laser diffraction analysis. Flour samples were suspended in deionized water at temperatures ranging from 30 to 90 °C for 20–60 min. At 30 °C, all of the flour particles exhibited trimodal size distributions, i.e., the particles in the first, second, and third modes were <10 μm, 10–50 μm, and 51–300 μm, respectively. Control experiments with isolated starch indicated that the first and second modes were associated mainly with starch granules, whereas the third mode may have been related to gluten and gluten adhesion. The particle size distributions of waxy segregant wheat flours were temperature dependent. At 60 °C, there were significant changes in the particle size and distribution of waxy flours, which indicated the swelling of starch granules in response to elevated temperature. As the temperature increased, the peak particle size of waxy segregant wheat flours increased in different ways. The results suggest that variations in the swelling properties of selected waxy genotype flours may be due to the strength of starch–protein interaction and the capacity for starch granule gelatinization.     

Improving effect of lyophilization on functional properties of resistant starch preparations formed by acid hydrolysis and heat treatment

In this study, effects of lyophilization on the functional properties of acid modified and autoclaved corn starch preparations were investigated. RS contents and pasting properties of these starch preparations were also determined. Significant increases in solubility were observed as the hydrolysis level of the lyophilized samples increased. All of the acid-modified gelatinized–autoclaved–lyophilized samples had higher water binding values than those of native starch and heat treated oven-dried native starch. Acid-modified gelatinized–autoclaved–lyophilized samples (with storage at 95°C: GASL or without storage: GAL, before lyophilization) improved emulsion properties of soy protein solution significantly. Acid modification seems to be a prerequisite to achieve improving effect of lyophilization. While native starch did not contain any RS, the level increased to 8.1% due to gelatinization, autoclaving and oven-drying (Control 2). The RS content of Control 2 was higher than that of gelatinized–autoclaved–lyophilized native starch (N-GAL, 2.9%). The samples stored prior to lyophilization had higher RS contents as compared to the corresponding unstored samples. The highest RS content (12.4%) was observed in 2h-GASL sample. Cold viscosity was observed in the RVA curves of N-GASL, 2h-GASL, N-GAL and 2h-GAL samples. A possible mechanism/model is suggested to explain the lack or existence of a cold viscosity.     

Effect of annealing from traditional nixtamalisation process on the microstructural,thermal, and rheological properties of starch and quality of pozole

Eleven maize landraces were evaluated for pozole quality. The microstructural, thermal and rheological properties of annealed starch granules determine most of the quality of pozole. Annealed starch in traditional nixtamalisation has an important role in increasing gelatinisation onset (To), peak (Tp) and final (Tf) temperatures; peak, setback and final viscosity as well as the stability of the starch granule, all of which significantly affect pozole quality. Annealed starch in Cacahuacintle nixtamal (pozole end-use) increased temperatures To, Tp and Tf by >5.2, >3.8 and >4.1 °C respectively, and narrowed the range Tf − To from 13.78 to 12.62 °C. The enthalpy was reduced from 6.76 to 5.85 J/g, while the nixtamal starch in tortilla maize landraces presented fewer annealing effects. The annealing effect in nixtamal starch seems to stabilize the starch granules and avoid their collapse, compared to native starch, as shown by the X-ray diffraction peak intensity and pattern that is similar to unprocessed maize. Starch in nixtamal changes from Type A to Type V pattern in pozole. Kernel physical parameters, although important, affected the quality to a lesser extent, with the exception of the flotation index. Cacahuacintle maize landrace showed the best quality and yield as well as a short pozole cooking time.     

Slow digestion property of microencapsulated normal corn starch

Starch is the main glycemic dietary carbohydrate, and its nutritional quality is associated with the amount of slowly digestible starch (SDS) that is beneficial to glycemic control. In the current study, a microencapsulation of normal corn starch by zein protein and its slow digestion property were investigated. A significant increase of SDS and RS was shown for starch capsules (weight ratio of zein to starch: 1:6) containing plasticizers of glycerol and oleic acid after high temperature (≥70 °C) treatment. Further studies showed a substantially decreased viscosity and the formation of an amylose–lipid complex after starch gelatinization. Thus, the hydrophobic physical barrier of the zein matrix and the amylose–lipid complex might together limit the water accessibility and starch swelling leading to a dense packing of starch materials with a high amount of SDS. The acceptable sensory property makes it an ideal ingredient for specialty food preparation and glycemic control.     

Modelling starch phase transitions and water uptake of rice kernels during cooking

To model the cooking processes of rice, starch gelatinization, the level of fusion of the amylose-lipid complex, and equilibrium water uptake have to be known for any given condition. Starch phase transitions were measured by DSC in two milled Korean round rice kernels whose water contents ranged from 0.18 to 4.7 g g⁻¹ db. Two to three partially overlapping transitions were assessed. Starch thermal transitions were modelled using a double step approach. First, a mechanistic double sigmoid model was fitted with DSC data for any water content value. Each parameter of the mechanistic model was then modelled with conservative empirical water content functions. In this way we obtained an explicit form of phase transition levels as a function of both temperature and water content. In parallel, the water uptake kinetics of rice kernels was determined in the temperature range of 50 °C–100 °C. Equilibrium water uptake was found to be linked to starch phase transitions and a model was built to calculate equilibrium water uptake as a function of modelled starch gelatinization and amylose-lipid complex fusion levels.     

Influence of environmental temperature during grain filling period on granule size distribution of rice starch and its relation to gelatinization properties

High temperature (HT) is the major environmental factor affecting grain starch properties of cooking rice cultivars. However, little information has been available on the effect of environmental temperature on the starch granule size distribution of rice grains. In this paper, five indica rice genotypes, including the wild type (9311) and its four mutants differing in amylose content (AC), were used to investigate the effect of environmental temperature on the starch granule size distribution, as well as its relation to AC and gelatinization properties of rice starch. Two temperature treatments (HT and NT) at filling stage were imposed to rice plants under the controlled temperature chambers. The result showed that HT increased the average diameter of starch granules and enhanced the proportion of large starch granules (LSG, D > 2.6 μm) by number, volume and surface area, respectively. However, influence of HT on GT and starch granule size distribution was relatively independent of their alteration in AC level for different rice genotypes. Therefore, HT-induced increase in the average diameter of starch granules and LSG percentage was strongly responsible for the higher starch gelatinization temperature and inferior cooked palatability of HT-ripening rice grains, which be not inherently associated with their varying AC level.     

Starch gelatinization distribution and peripheral cell disruption in cooking rice grains monitored by microscopy

Starch gelatinization kinetics governs rice cooking behaviour (cooking time and texture). Starch gelatinization however occurs unevenly in the cooking grain. The aim of this study was to investigate the dynamics of starch gelatinization topography in rice kernels cooked in excess water at two temperatures: 75 °C and 95 °C, for times ranging from 5 to 30 min. Gelatinization front position was assessed over time on 40 μm cross sections using four different tracking methods: directly or after iodine staining using a microscope or a stereomicroscope under normal or polarized light. The four methods gave similar results and the obtained kinetics can be used to model starch gelatinization during grain cooking.In parallel, changes in the structure of the peripheral area of cooked grains were investigated on 3 μm cross sections under the same cooking conditions. Microscopic observations by auto fluorescence and after iodine staining revealed dynamic peripheral cell disruption at the same time as starch gelatinization, which may have a major impact on starch leaching and hence on the textural properties of the cooked grain.     

Hydrolysis of granular corn starch with controlled pore size

Native corn (Zea mays L.) starch granules were hydrolyzed using glucoamylase at 50 °C for 1–8 h. The degree of hydrolysis over time was analyzed by the concentration of glucose released into solution. The pore sizes of hydrolyzed starch granules increased gradually with the degree of hydrolysis, as evidenced by scanning electron micrographs. It was deduced that every pore on the surface of granules was formed by hydrolysis of one enzyme molecule, so the size of pores distributed on the surface of starch granules was almost homogeneous for the same hydrolysis time. The specific surface area (S_BET), porosity, adsorptive capacity and mean pore radius of porous starch granules were determined to analyze the effect of digestion time on granule properties.     

Modification of physicochemical properties and in vitro digestibility of wheat flour through superheated steam processing

Native and moistened wheat flours (moisture contents were 13.5 and 27.0%, respectively) were treated with superheated steam (SS) at different temperatures (140 and 170 °C) and times (1, 2 and 4 min). Their physicochemical and digestive properties were analyzed. For native flour, SS treatment altered the starch molecular structure and behavior slightly. While for moistened flour, crystalline degree, gelatinization enthalpy, amylose leaching (AML) and falling number significantly decreased, but thermal transition temperatures increased with the rise of treating severity. Clumping of starch granules, aggregation of proteins and formation of amylose-lipid complexes occurred in both native and moistened flours. Broader pasting temperature ranges and higher viscosities were found on SS-modified flours. Additionally, SS treatment on moistened flours increased resistant and slowly digestible starch contents. In general, SS treatment induced changes in starch molecular structure and reactions among flour components leading to more stable structures, thus affecting their pasting behavior, thermal properties and in vitro digestion.     

Effect of extrusion cooking on chemical structure,morphology, crystallinity and thermal properties of sorghum flour extrudates

The effect of feed moisture content (10, 14 and 18%) and die temperature (110 and 160 °C) on functional properties, specific mechanical energy (SME), morphology, thermal properties, X-ray diffraction pattern (XRD), Fourier transform infrared spectroscopy (FTIR) and amylose-lipid complex formation of extruded sorghum flour was investigated. Results showed that the extrusion cooking significantly changed the functional properties of extruded sorghum flour. Increasing feed moisture increased the peak gelatinization temperature (T_p), the degree of gelatinization (%) and starch crystallinity (%) while it decreased the gelatinization temperature ranges (T_c - T₀), starch gelatinization enthalpy (ΔH_G) and amylose-lipid complex (%) formation. With increasing die temperature, the degree of gelatinization and amylose-lipid complex formation increased and the starch T_p, T_c-T₀, ΔH_G and crystallinity decreased. The FTIR spectra also showed that the extrusion cooking did not create new functional groups or eliminate them in sorghum protein, whereas the sorghum extrudate protein had random coil conformation.     

Effects of heat,drought and their combined effects on morphological structure and physicochemical properties of rice (Oryza sativa L.) starch

High temperature (HT) and drought stress (WS) severely affect rice quality by altering the starch structure in rice. The morphological and physicochemical properties of starches isolated from two rice varieties grown under three stress treatment (HT, WS and WS + HT) during the grain filling stage were investigated. The results showed that WS increased amylose content (AC%) and the proportion of large starch granules (LSG) and made the surface of the starch granule smooth and flat. As a result, a lower relative crystallinity, surface order, swelling power, setback viscosity and gelatinization enthalpy were caused. HT decreased AC% and milled rice rate, but increased chalky rice rate, the number of LSG and the large air space and pits on the surface of the starch granules. As a result, a higher relative crystallinity, surface order, swelling power, setback viscosity and gelatinization enthalpy were caused. Similar results were observed under the treatment of WS + HT, indicating that there is a mild antagonistic effect on rice starch when the HT and WS occur simultaneously.     

Changes in gelatinization and rheological characteristics of japonica rice starch induced by pressure/heat combinations

Rice starch suspensions of 10% dry matter (DM) were treated by heat (0.1 MPa at 20–85 °C) or pressure/heat combinations (100–600 MPa at 20, 40 and 50 °C) for 15 min to investigate their gelatinization and rheological characteristics. The maximum swelling index of about 12 g water per gram of DM was obtained by thermal treatment at 85 °C, meanwhile, that of 7.0 g was observed by 600-MPa pressurization at 50 °C. The higher temperatures or pressures resulted in the higher degrees of gelatinization. Furthermore, treatments of 0.1 MPa at 85 °C, 500 MPa at 50 °C and 600 MPa at various temperatures caused complete gelatinization of rice starch. The consistency index (K) and storage modulus (G′) dramatically increased from 70 °C or 400 MPa. The G′ values were higher in pressure-treated samples than those in thermal-treated samples. Therefore, an application of pressure/heat combinations as a processing method to improve the quality of rice starch products would be possible.     

Effect of partial gelatinization and retrogradation on the enzymatic digestion of waxy rice starch

The effect of partial gelatinization and retrogradation on in vitro enzymatic digestibility of waxy rice starch was investigated, and the relationship between the residual crystallinity and digestibility measured. An aqueous dispersion of starch (5%, dry weight basis) was partially gelatinized by heating at different temperatures (60, 65, or 70 °C for 5 min). The relative melting enthalpy values of the starch samples, based on the melting enthalpy of native starch, were 69.0, 36.7, and 8.5%, respectively. Retrograded starch samples were also prepared by storing a fully gelatinized starch paste (5% starch) at 4 °C for 2, 4, or 7 d, and the relative melting enthalpy values for the starch samples were 36.7, 67.2, and 79.9%, respectively. The partial gelatinization and retrogradation changed the enzymatic digestion behavior of the waxy rice starch samples, and the changes were significant in the initial stage of digestion. The digestion rate was reduced as the melting enthalpy increased. The amounts of slowly digestible starch (SDS) and resistant starch (RS) correlated positively with the relative melting enthalpy of the partially gelatinized or retrograded starch samples. The glycemic index (GI) estimated using an in vitro digestion test correlated negatively with the relative melting enthalpy. At similar melting enthalpy levels, the partially gelatinized starch samples were more resistant to enzymatic digestion than the retrograded starch samples, indicating that the thermal history and the crystalline morphology affected the enzymatic digestion behavior of starch.     

Dough/crumb transition during French bread baking

The modifications occurring during dough to crumb (D/C) transition of French bread (350 g) were studied in an instrumented pilot-scale oven for doughs with different contents of minor components, soluble, lipids and puroindolines. Internal temperature measurements showed that, for most compositions, complete D/C transition occurred between 55 and 70 °C, after 5 min of baking, and coincided with maximum loaf expansion. Differential scanning calorimetry (DSC) in excess of water performed on samples taken during baking (3 and 5 min) showed that starch gelatinization and melting developed continuously during D/C transition for various contents of the soluble fraction in dough. Dynamic thermomechanical analysis (DMA) on dough showed that dough stiffened between 60 and 70 °C, as seen by the increase of elastic modulus E′ by more than one decade, for all dough compositions. Relating these changes to the results of baking experiments, D/C transition was assigned first to gluten reticulation and, to a lesser extent, to continuous starch granule swelling.