Electrospun poly(tetrafluoroethylene) nanofiber membranes from PTFE-PVA-BA-H<Subscript>2</Subscript>O gel-spinning solutions

As a kind of high-performance fibers, PTFE fiber has been widely used in many fields because of its unique characteristics. In this study, the poly(tetrafloroethylene) (PTFE) nanofibers manufactured by electrospinning method was reported. The gel-spinning solution of poly(tetrafluoroethylene)/poly(vinyl alcohol)/boric acid (PTFE/PVA/BA), which was prepared by the gel process of the mixture of PTFE, PVA, BA and redistilled water, was electrospun to form PTFE/PVA/BA composite nanofibers. After calcinating, the PTFE nanofibers with diameters of 200 nm to 1000 nm were obtained. The fibers before and after calcinating were characterized by scanning electron microscopy (SEM), thermogravimetric analysis (TGA), X-ray diffraction (XRD), FT-IR spectrum analysis and X-ray photoelectron spectroscopy (XPS), respectively, and the mechanical and hydrophobic properties of the fibers were also investigated. The results showed that the PTFE nanofiber membranes could be electrospun effectively used the gel-spinning solution of PTFE/PVA/BA, and may realize the applications in the fields of high-temperature filtration, catalyst supports, battery separator and so on.     

Electrospun in-situ hybrid polyurethane/nano-TiO<Subscript>2</Subscript> as wound dressings

By combining the organic-inorganic hybridization, wet phase inversion, and electrospinning, novel electrospun polyurethane (PU) membranes with in-situ generated nano-TiO₂ were prepared, which satisfied the requirements of an ideal wound dressing. The morphology of the PU-TiO₂ mats and the cross sectional morphologies of the membranes were characterized by a scanning electron microscopy (SEM). The average diameter of the individual fibers obtained from the solutions was 341±12 nm. SEM micrographs with higher magnification further showed that the in-situ generated TiO₂ particles were well-separated and dispersed homogeneously in the membranes. The average sizes of TiO₂ particles were increased from 31 to 57 nm, with the increase of nano-TiO₂ concentration. The water vapor transmission rates (WVTRs) of the membranes were in the range of 373.55–3121.86 g/m²·d and decreased gradually with the increase of nano-TiO₂ concentration. The water absorption of various PU membranes was in the range of 210.90–397.98 % which was enough to prevent wound beds from exudate accumulation. Shake flask testing indicated that the PU membrane exhibited antibacterial efficiency against Pseudomonas aeruginosa (Ps. aeruginosa) and Staphylococcus aureus (S. aureus) due to in-situ generated of nano-TiO₂. These electrospun nanofibrous membranes also had no toxic effect and showed good and immediate adherence to L929 cells.     

Performance of PTT fabric treated with CNTs/SiO<Subscript>2</Subscript>/thiazole dye hybrid materials

A series of CNTs/SiO₂/thiazole dye hybrid materials prepared via the sol-gel process is synthesized from carbon nanotubes (CNTs) and tetraethoxysilane with heteroaryl 4-phenyl-2-amino-thiazole dyes. Heterocyclic 4-phenyl-2-aminothiazole dyes are processed with the hydrolysis-condensation reaction at a constant ratio of vinyltriethoxysilane and tetraethoxysilane condensed with modified CNTs in appropriate proportion under a catalyst. The structures of the CNTs/SiO₂/thiazole dye hybrid materials are characterized by Fourier transform infrared spectroscopy (FTIR). Polytrimethylene terephthalate (PTT) fabrics are used to evaluate the morphology structure by scanning electron microscopy (SEM). SEM images show that a uniform dyeing on the PTT fabrics to confirm the reaction of hybrid materials with PTT fabrics. The washing fastness, color evenness, water contact angle, air permeability, electric conductivity, and weatherability of PTT fabrics dyed with CNTs/SiO₂/thiazole dye hybrid materials are evaluated, with results indicating improved conductivity and water-repellent.     

Synthesis of Ag-Loaded TiO<Subscript>2</Subscript> Electrospun Nanofibers for Photocatalytic Decolorization of Methylene Blue

Titanium dioxide (TiO₂) is one of the excellent photocatalysts used for degradation of environmetal pollutants. In this work, 2.5, 5.0 and 7.5 wt.% of silver (Ag)-loaded TiO₂ nanofibers of mean size 52–134 nm were synthesized by electrospinning method. These electrospun nanofibers were calcined at 500 °C to enable the transformation of Rutile (R) phase to Anatase (A), elimination of reaction moieties from the TiO₂ matrix and subsequently formation of Ag clusters. The effect of Ag loading on the morphology, crystal structure, phase transformation, and band gap of these electrospun nanofibers have been characterized by scannining electron microscopy (SEM), X-ray diffraction (XRD), fourier transform infrared spectroscopy (FTIR), raman spectroscopy and UV-visible spectroscopy. These nanofibers exhibited a red-shift in the absorbance edge and a significant enhancement of light absorption in the wavelength range of 250–550 nm. These electrospun nanofibers were investigated for photodecomposition of methylene blue (MB), and photocatalytic decolorization rates were determined by pseudo-first-order equation. The rate constants for the pure and those of 2.5, 5.0, and 7.5 wt% Agloaded TiO₂ nanofibers were computed to be 0.1439 min^-1, 0.1608 min^-1, 0.1876 min^-1, and 0.2251 min^-1 respectively.     

The synergy effect of Graphene/SiO<Subscript>2</Subscript> hybrid materials on reinforcing and toughening epoxy resin

Based on the situ preparation of silica nanoparticles (SiO₂) on the surface of Graphene nanoplatelets (GNPs) in the previous work, these unique three dimensional (3D) materials were introduced into epoxy resin to study the reinforcing and toughening synergy effect on the composites. Firstly, the tensile tests showed that Graphene/SiO₂ hybrid materials attached with different size of SiO₂ particles exhibited different reinforcing and toughening effect on the composites. With the increasing of the diameter of SiO₂ particles, the toughness and strength properties of the composites firstly improved and then decreased, and when the average diameter was 0.14 μm, the elongation reached the max.. Meanwhile, the fractured surfaces presented on SEM images were consistent with the results of the tensile tests, which further explained the hybrid materials increased the interfacial adhesion between the fillers and matrix, leading to significant improvement in mechanical properties. Moreover, the DSC curves demonstrated that Graphene/SiO₂ hybrid materials accelerated the curing process of epoxy resin due to the cross-link structure between fillers and matrix. Lastly, the crack propagation modes were built to clarify the synergy effect mechanism of reinforcing and toughening on nanoparticles/epoxy resin composites.     

Ladder-Structured Polysilsesquioxane/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Nanocomposites for Transparent Wear-Resistant Windows

As a protective layer for deformable displays, we synthesized ladder-type polysilsesquioxanes (LPSQs) containing cyclic epoxy as a curable unit. The mechanical properties after photo- and thermal-curing of LPSQs with a small amount of added Al₂O₃ nanoparticles were compared with those of the pure LPSQs. The prepared LPSQ-Al₂O₃ nanocomposites and the pure LPSQs exhibited comparable optical transparencies and thermal stabilities. In addition, the degree of conversion of the applied epoxy units in LPSQs and the resulting mechanical properties, as monitored by Fourier transform infrared spectroscopy and nanoindentation tests, indicated that the addition of nanoparticles to LPSQs moderately enhanced the epoxy conversion rate and remarkably improved the wear resistance, including hardness, after photo-/thermal-curing processes. The LPSQ-Al₂O₃ nanocomposites achieved higher wear resistance than epoxy-silica nanocomposites containing similar curable functional groups and reinforcing fillers (silica). The excellent mechanical properties of the LPSQ-Al₂O₃ nanocomposites could be attributed to three-dimensionally interconnected networks of organic-inorganic hybrid-type chemical structures in the LPSQ as well as additional reinforcement from amine-functionalized Al₂O₃ nanoparticles covalently interconnected with the LPSQ. We believe that the devised LPSQ-Al₂O₃ nanocomposites could serve effectively as a wear-resistant platform for deformable display windows.     

Controlling the Properties of OPEFB/PLA Polymer Composite by Using Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> for Microwave Applications

Microwave-absorptive polymer composite materials provide protection against interference to communication systems caused by microwave-inducing devices. Microwave-absorptive polymer composites were prepared from polylactic acid (PLA) biocomposite blended with oil palm empty fruit bunch (OPEFB) fiber and commercial Iron oxide (Fe₂O₃) as filler using the melt-blending method. The composites characterization was carried out using the scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses. The coefficient of reflection S₁₁ and coefficient of transmission S₂₁ of the composites for various Fe₂O₃ filler percentages were determined using a rectangular waveguide in connection with microwave vector network analyser (HP/Agilent model PNA N5227). These coefficients were then used to calculate microwave-absorption properties (in decibels). XRD analysis showed that increasing amounts of reinforced material (Fe₂O₃) reduces the crystallinity of the composites. SEM data indicated that Fe₂O₃ filler ratio increased in the composites, and adhesion to the cellulose fiber grew gradually until the highest percentage of filler was added. The complex relative permittivity and relative permeability were obtained within the broad frequency range of 8–12 GHz at room temperature for various percentages of filler and were measured by the transmission/reflection method using a vector network analyser. Fe₂O₃ embedment in OPEFB/PLA was observed to have resulted in enhancing the dielectric and magnetic properties. The values of permittivity and permeability increased with increasing Fe₂O₃ filler content. Theoretical simulation studied the relation between ε′ and ε″ of the relative complex permittivity in terms of Cole-Cole dispersion law. The result indicated that the processes of Debye relaxation in Fe₂O₃/OPEFB/PLA, the unique dielectric characteristics of Fe₂O₃ cannot be accounted for by both the Debye dipolar relaxation and natural resonance. Results further showed that the material transmission, reflection, and absorption properties could be controlled by changing the percentage of Fe₂O₃ filler in the composites.     

Synthesis of electrospun carbon nanofiber/WO<Subscript>3</Subscript> supported Pt,Pt/Pd and Pt/Ru catalysts for fuel cells

In the present study, nano-sized Pt/WO₃-carbon nanofiber, Pt-Pd/WO₃-carbon nanofiber and Pt-Ru/WO₃-carbon nanofiber electrocatalysts were synthesized and the performance of prepared catalysts were compared with catalysts coated carbon black for the oxygen reduction reaction (ORR). The morphology and structure of prepared catalysts were characterized using scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. The SEM images showed that the catalyst nanoparticles were well dispersed on the both carbon nanofiber and carbon black supports. Electrochemical measurements including linear sweep voltammetry (LSV), electrochemical impedance spectroscopy (EIS) and chronoamperometry (CA) tests were applied to investigate the potential of the fabricated electrodes on the ORR. The results demonstrated that the catalysts based on carbon nanofibers showed a significant increase of activity toward the ORR. Also, the Pt/Pd coated carbon nanofibrous electrode showed the highest electrochemical activity.     

Polyaniline-doped TiO<Subscript>2</Subscript>/PLLA fibers with enhanced visible-light photocatalytic degradation performance

A simple and practical strategy has been developed for preparing polyaniline(PANi)-doped TiO₂/poly(l-lactide) (P@TiP-C) fibers by a combination of coaxial-electrospinning and in-situ polymerization. The TiO₂/PLLA composite fibers with TiO₂ located on the surface were fabricated by coaxial-electrospinning, with PLLA as the core phase and a dispersion of TiO₂ particles, a well-known photocatalyst, in the sheath phase. The aniline monomers were also located in the core phase and in-situ polymerized by ammonium persulfate (APS) after electrospinning. SEM images show that TiO₂ particles were located on the surface of PLLA fibers. Photocatalytic degradation tests show that the P@TiP-C fibers exhibit enhanced photocatalytic activity for degradation of methyl orange under visible light, likely due to the synergistic effect of PANi and TiO₂.     

Effect of phase transformation on physical and biological properties of PVA/CaFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanocomposite

The thermal treatment method was employed to achieve higher homogeneity of calcium ferrite (CaFe2O4) and Poly (vinyl alcohol) (PVA) nanocomposites. The influences of phase transformation on physical and biological properties of calcined specimens were investigated by various experimental techniques including X-ray diffraction (XRD), Transmission Electron Microscopy (TEM), high resolution Field emission scanning electron microscope (FESEM) and Fourier transform infrared spectroscopy (FT-IR). Heat treatment was conducted at temperatures between 723 and 923 K, so that a phase transformation occurred from cubic to orthorhombic spinel structure at 923 K. The chemical analysis of the PVA/CaFe₂O₄ nanocomposite was performed by energy dispersion X-ray analysis (EDXA), demonstrated the PVA/CaFe₂O₄ nanocomposites contained the elements of C, Ca, Fe, and O. The formed nanocomposites exhibited ferromagnetic behaviors which were confirmed by using a vibrating sample magnetometer (VSM). The calcined specimens were carried out to an antimicrobial or antifungal test.     

Immobilization of Cationic Titanium Dioxide (TiO<Subscript>2</Subscript><Superscript>+</Superscript>) on Electrospun Nanofibrous Mat: Synthesis,Characterization, and Potential Environmental Application

We report a facile approach to fabrication and characterization of cationic titanium dioxide (TiO₂⁺) on poly (vinyl alcohol)/poly (acrylic acid) (PVA/PAA) composite electro-spun nanofibrous mat. The aim of this study is to develop a “functional electrospun nanofibrous mat” as a sustainable approach to superior photocatalytic degradation of organic colorants. For that, the PVA/PAA nanofibrous mat was prepared by electrospinning of PVA and PAA solution according to an aspect ratio of 1:1 and later water stability was induced by the thermal cross linking at an elevated temperature of 145 °C for 30 minute. By means of electrostatic layer-by-layer (LbL) assembly, cationic titanium dioxide (TiO₂⁺, ~19 nm) was immobilized on the surface of the water stable nanofibrous mat. As functionalized composited nanofibrous mat was characterized by using scanning electron microscope (SEM), fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) analysis and thermogravimetric analysis (TGA). Superior competency of the functionalized nanofibrous mat towards photocatalytic degradation of organic dye (methyl blue) in aqueous solution was observed by using UV-visible spectrophotometer with quantitative measuring method. The result indicates a complete degradation of methyl blue within 40 mins and superior reusability upto 5 cycles application. The study signifies the prospect of using electrospun nanofibers to manipulate the catalytic activity, which could be a foundation for further rational design of various composite nanofibrous materials.     

Preparation and characterization of inner-pressure hollow fiber composite membrane via two-way coating technique for CO<Subscript>2</Subscript>/CH<Subscript>4</Subscript> separation

High-selectivity inner-pressure hollow fiber composite (HFC) membrane for CO₂/CH₄ separation was prepared through the Two-way coating (TWC) technique. The blends of poly(vinylamine) (PVAm)/polyvinyl alcohol (PVA) were coated onto porous hollow fiber polysulfone (PSF) ultrafiltration (UF) membrane with an effective membrane area of 0.4 m². The effects of fabrication parameters on the permselectivity of the resultant HFC membrane were investigated and the optimum preparation conditions were obtained as follows: coating time for 30 min and air blowing time for 30 min after the coating. The prepared HFC membrane showed the typical characteristic of fixed carrier membrane with a high selectivity of CO₂ and CH₄: the separation factor of CO₂/CH₄ (40 vol% CO₂ at 25 °C and 0.2 MPa) was 36.6 and the CO₂ permeability was 56.3 GPU. Field emission scanning electron microscopy (FESEM) images indicated that the HFC membrane prepared by TWC technique had a uniform coating layer along the whole hollow fiber. Membrane permselectivity showed almost no difference between different membrane sections. The HFC membrane showed a good stability during the continuous testing process of 540 h. And the HFC membrane preserved at 30 °C and 40 % humidity exhibited a good durability with a basically unchanged separation factor after 30 days.     

Degradation and kinetic modeling of polyvinyl alcohol in aqueous solutions by a H<Subscript>2</Subscript>O<Subscript>2</Subscript>/Mn(II) system

This paper is about the degradation of polyvinyl alcohol (PVA) in aqueous solutions using a H2O2/Mn(II) system. Fourier transform infrared spectroscopy (FTIR) and gel permeation chromatography (GPC) were applied to analyze the degradation products of PVA, and the results revealed that the backbone chain of PVA could be effectively broken and oxidized. Several unsaturated degradation products, including carboxylic acids, ketones, aldehydes, olefins, and alkynes were also detected and identified by gas chromatography-mass spectrometry (GC-MS), which indicated that higher treatment temperatures would considerably promote the generation of lower molecular weight degradation products. According to the work presented in this paper, the degradation efficiency of PVA increased from 55 % at 60 oC to 99 % at 90 oC after treatment when the initial PVA concentration was 5 %, at pH=3 with a H2O2 and Mn(II) dose of 100 ml/l and 0.6 mol/l, respectively. In addition, kinetic modeling indicated that the experimental results were best fitted by the Page-modified model with an activation energy of 48.78 kJ/mol.     

Multifunctional modification of wool fabric using graphene/TiO<Subscript>2</Subscript> nanocomposite

In this study, a new finishing technique is introduced through treatment of wool fabric with graphene/TiO₂ nanocomposite. Graphene oxide/titanium dioxide nanocomposite first applied on the wool fabric by hydrolysis of titanium isopropoxide in graphene oxide suspension and then this coating chemically converted by sodium hydrosulfite to graphene/TiO₂ nanocomposite. The homogenous distribution of the graphene/TiO₂ nanocomposite on the fiber surface was confirmed by field emission scanning electron microscopy (FE-SEM), Energy-dispersive X-ray spectroscopy (EDS) and X-ray mapping. X-ray diffraction patterns proved the presence of titanium dioxide nanoparticles with a crystal size of 127 Å on the treated wool fabric. Also, the defect analysis based on X-ray photoelectron spectroscopy (XPS) established the composition of the nanocomposite. Other characteristics of treated fabrics such as antibacterial activity, photo-catalytic self-cleaning, electrical resistivity, ultraviolet (UV) blocking activity and cytotoxicity were also assessed. The treated wool fabrics possess significant antibacterial activity and photo-catalytic self-cleaning property by degradation of methylene blue under sunlight irradiation. Moreover, this process has no negative effect on cytotoxicity of the treated fabric even reduces electrical resistivity and improves UV blocking activity.     

In situ loading TiO<Subscript>2</Subscript> and its photocatalysis and UV resistance on cotton fabric

Anatase TiO₂ nanoparticles was in-situ formed on the cotton fabric by using tetrabutyl titanate (TBT) as a precursor through the normal pressure hydrothermal method. X-ray diffraction (XRD), Scanning electron microscopy (SEM), UV visible spectra (UV-VIS), ATR-IR were used as the characterization techniques. Photocatalytic performance of TiO₂ on the fabric surface was evaluated by methylene blue (MB), 4 kinds of the common living stains and three dyes under ultraviolet and visible light radiation. XRD analysis found that the TiO₂ loaded on the fabric was mainly anatase crystalline phase with particle size of 6.4 nm. SEM observed that a large number of nano TiO₂ particles are distributed on the fabric surface. UV-VIS test indicated that theTiO₂-coated fabric possessed an obvious absorption for ultraviolet. ATR-IR analysis indicated that the nano-TiO₂ possesses a strong affinity with the hydroxyl group of the cotton fabric, and the soaping tests showed that the TiO₂ was firmly bonded with the fabrics. The treated fabrics have good degradation ability for MB aqueous solution, and could degrade azo, anthraquinone and phthalocyanine dyes. The order of degradation of the common life stains was: pepper oil> tea > coffee > soy sauce.     

Polyacrylonitrile/electroconductive TiO<Subscript>2</Subscript> nanoparticles composite fibers <Emphasis Type="Italic">via</Emphasis> wet-spinning

For the first time, novel polyacrylonitrile (PAN)/electroconductive TiO₂ (EC-TiO₂) nanoparticles composite fibers have been successfully spun via wet-spinning. The composite fibers had uniform diameter and homogeneous surface. Moreover, at low content of EC-TiO₂ nanoparticles, the composite fibers realized a transition from an insulator to a conductor. This work has provided a simple and effective avenue for the production of PAN/EC-TiO₂ nanoparticles composite fibers that have great potential applications in the antistatic textiles.     

Coagulation studies for hydroxyethyl cellulose (HEC) in NaOH/H<Subscript>2</Subscript>O solvent

Hydroxyethyl cellulose (HEC)/NaOH frozen rods were applied in the investigation of the coagulation kinetics. The influence of coagulation variables such as types of coagulants, coagulation temperature, concentration of coagulant, and content of HEC on coagulation rate was intensively studied based on boundary movement theory. It was confirmed that the coagulation of HEC was actually diffusion-controlled process and sometimes accompanied with chemical reactions. The coagulation rate of HEC rods in strong acid (sulfuric acid) exceeded that in weak acid (acetic acid), while the coagulation rate in ethanol was the slowest. It was hard to determine the coagulation rate of HEC frozen rods in deionized water without pre-solidifying because of the difficulty in keeping the cylindrical shape of sample due to the low strength of the coagulated surface layer. Besides, the increase of acid concentration, temperature, or content of HEC would contribute to the improvement of coagulation rate. This study is important for understanding and controlling the shaping process of HEC.     

Nano-TiO<Subscript>2</Subscript> based multilayer film deposition on cotton fabrics for UV-protection

Nano-TiO₂ based multilayer nanocomposite films were fabricated on cationically modified woven cotton fabrics by layer-by-layer molecular self-assembly technique. Cationization process was used to obtain cationic surface charge on cotton fabrics. Attenuated total reflectance Fourier transform infrared spectroscopy analyses were used to verify the presence of cationic surface charge and multilayer films deposited on the fabrics. Scanning electron microscope micrographs of poly(sodium 4-styrene sulfonate)/TiO₂, nano polyurethane/TiO₂, and TiO₂/poly(diallyldimethylammonium chloride) multilayer films deposited on cotton fabrics were taken. With nano-TiO₂ based multilayer film deposition, the protection of cotton fabrics against UV radiation is enhanced. The UV protection durability of the self-assembled multilayer films deposited on the cotton fabrics was analyzed after 10 and 20 washing cycles at 40 °C for 30 min. Air permeability and whiteness value analysis were performed on the untreated and multilayer film deposited cotton fabrics. The effect of layer-by-layer deposition process on tensile strength properties of the warp and weft yarns was determined.     

Modification and Characterization of Nano-TiO<Subscript>2</Subscript> for Efficient Fixation on Cotton Fibers

In this paper, a silane coupling agent, 3-aminopropyltriethoxysilane, was reacted with nano-TiO₂ to introduce amino group onto it which was then reacted with trichlorotriazine to obtain a dichlorotriazine functionalized nano-TiO₂ for the firm fixation of it on cotton fibers. The reaction process was monitored by the titration of primary and secondary amino groups, and the reaction conditions were optimized with orthogonal method accordingly. The dichlorotriazine functionalized nano-TiO₂ was reacted with cotton fabric by the nucleophile substitution reaction to afford nano-TiO₂ functionalized cotton fabric, the structure and surface morphology of the nano-TiO₂ finished cotton fibers were studied by FT-TR and SEM. In addition, the fixation duration of the nano-TiO₂ modified cotton was studied according to AATCC test method 61–2010. The results show that the washing fastness of the nano-TiO₂ is excellent.     

Spherical Bacterial Cellulose/TiO<Subscript>2</Subscript> Nanocomposite with Potential Application in Contaminants Removal from Wastewater by Photocatalysis

Contaminants are often found in aquatic environments, for instance, heavy metals, dyes, parasites, pesticides, hormones and pharmaceuticals. Therefore, large amounts of these contaminants reaches wastewater via industrial and domestic effluents, causing major concern to human health. Heterogeneous photocatalysis is a technique for removing these contaminants in order to achieve better efficiency in water treatment. Then, bacterial cellulose (BC) produced in an agitated culture can form spherical bodies composed of nanofibers with high specific surface area. Moreover, Titanium dioxide (TiO₂) is a semiconductor containing high photocatalytic activity capacity. Thus, the main objective in this work was to produce spherical BC/TiO₂ nanocomposites for contaminants removal from wastewater by photocatalysis process. The incorporation of TiO₂ nanoparticles in the spherical BC matrix was performed by ex situ and in situ methods. In addition, Scanning Electron Microscope (SEM), Energy Dispersive Spectroscopy (EDS), Fourier Transform Infrared Spectroscopy (FTIR) and Thermogravimetric Analysis (TGA) were used as tools of morphological, chemical and thermal characterizations of the nanocomposites. Besides, photocatalysis tests were performed in order to evaluate the removal efficiency of methylene blue from aqueous solutions. The results of these tests exhibited a percentage of methylene blue removal of 70.83 and 89.58 % after 35 minutes for spherical BC/TiO₂ nanocomposites both, in situ and ex situ, respectively. Therefore, these results demonstrated that BC/TiO₂ to be a low cost material with high capacity of contaminants removing and a great potential for industrial applications.