Improved approach for analyzing bromophenols in seafood using stable isotope dilution analysis in combination with SPME

An analytical method for the measurement of five naturally occurring bromophenols of sensory relevance in seafood (barramundi and prawns) is presented. The method combines simultaneous distillation-extraction followed by alkaline back extraction of a hexane extract and subsequent acetylation of the bromophenols. Analysis of the bromophenol acetates was accomplished by headspace solid phase microextraction and gas chromatography-mass spectrometry using selected ion monitoring. The addition of (13)C 6 bromophenol stable isotope internal standards for each of the five congeners studied permitted the accurate quantitation of 2-bromophenol, 4-bromophenol, 2,6-dibromophenol, 2,4-dibromophenol, and 2,4,6-tribromophenol down to a limit of quantification of 0.05 ng/g of fish flesh. The method indicated acceptable precision and repeatability and excellent linearity over the typical concentration range of these compounds in seafood (0.5-50 ng/g). The analytical method was applied to determine the concentration of bromophenols in a range of farmed and wild barramundi and prawns and was also used to monitor bromophenol uptake in a pilot feeding trial.     

Synthesis and stable isotope dilution assay of ethanethiol and diethyl disulfide in wine using solid phase microextraction. Effect of aging on their levels in wine

Ethanethiol and diethyl disulfide (DEDS) most often occurred at levels above their olfactive threshold in wines with nauseous sulfur-linked smells. As ethanethiol is very oxidizable and chemically reactive, a stable isotopic dilution analysis of both ethanethiol and its disulfide in wines using solid phase microextraction and GC-MS was developed. The latter involved the determination of the proportion of DEDS formed by oxidation of the thiol during the analysis conditions, which was obtained by the use of two differently labeled disulfide standards. An original synthesis of labeled ethanethiol standards in conditions minimizing oxidation was developed, and the corresponding labeled diethyl disulfides were obtained from these thiols. This analytical method was used to follow the levels of these sulfur compounds during aging in a young red wine spiked with ethanethiol and added with enological tannins, with or without oxygen addition. The total levels of these two sulfur compounds were shown to decrease steadily after 60 days of aging, up to 83%. The effect of oxygen sped this decrease, but the effect of enological tannins was very slight. Residual ethanethiol was detected in its disulfide form from approximately 36% in the nonoxygenated wines to 69% in the oxygenated samples.     

Quantitation of odor-active compounds in rye flour and rye sourdough using stable isotope dilution assays

Application of the aroma extract dilution analysis on a flavor distillate prepared from freshly ground rye flour (type 1150) revealed 1-octen-3-one (mushroom-like), methional (cooked potato), and (E)-2-nonenal (fatty, green) with the highest flavor dilution (FD) factors among the 26 odor-active volatiles identified. Quantitative measurements performed by stable isotope dilution assays and a comparison to the odor thresholds of selected odorants in starch suggested methional, (E)-2-nonenal, and hexanal as contributors to the flour aroma, because their concentrations exceeded their odor thresholds by factors >100. Application of the same approach on a rye sourdough prepared from the same batch of flour revealed 3-methylbutanal, vanillin, 3-methylbutanoic acid, methional, (E,E)-2,4-decadienal, 2,3-butanedione, and acetic acid as important odorants; their concentrations exceeded their odor thresholds in water and starch by factors >100. A comparison of the concentrations of 20 odorants in rye flour and the sourdough made therefrom indicated that flour, besides the fermentation process, is an important source of aroma compounds in dough. However, 3-methylbutanol, acetic acid, and 2,3-butanedione were much increased during fermentation, whereas (E,E)-2,4-decadienal and 2-methylbutanal were decreased. Similar results were obtained for five different flours and sourdoughs, respectively, although the amounts of some odorants in the flour and the sourdough differed significantly within batches.     

Using in situ solid phase microextraction (SPME) for depth profiling in sediments treated with activated carbon

Purpose

Sediment contamination in US waterways is an expensive and complicated issue, and as acceptance of nontraditional sediment remediation strategies broadens, novel and efficient methods to assess and monitor the bioavailability of hydrophobic organic contaminants (HOCs) in contaminated sediments will play an important role.

Materials and methods

In this project, solid phase microextraction (SPME) fibers inside perforated steel tubes were used as in situ passive samplers to measure polycyclic aromatic hydrocarbon (PAH) concentrations in sediment before and after treatment with activated carbon (AC). Two modes of waterjet amendment injection were used to apply the AC. In the first treatment, a single 2-min injection was shot into the center of a test vessel, and in the second treatment, multiple 7-s injections in a grid were placed in sediment.

Results and discussion

In the single injection, no treatment was observed 5 cm away from the injection, while at 2.5 cm, >90 % decrease of PAH pore water concentration was observed, indicating a similar bioavailability decrease. In the multiple injection experiment, >90 % PAH pore water level reductions were observed throughout the test vessel. Highly contaminated and less contaminated sediments were mixed with 0–5 % AC by weight to develop AC treatment curves. Over 99 % reduction in PAH pore water concentrations and bioavailability was observed in the less contaminated sediment at 3 % AC, while 99 % reduction was never reached even at 5 % AC addition in the highly contaminated sediment. Different treatment curves were observed for the different contaminated sediments. In situ equilibration times were 120, 215, and 250 h for phenanthrene, pyrene, and benzo(a)anthracene, respectively.

Conclusions

The results show that in situ SPME is a viable method to observe AC treatment and evaluate reductions in pore water concentrations and bioavailability.     

Development of a stable isotope dilution assay for an accurate quantification of protein-bound N(epsilon)-(1-deoxy-D-fructos-1-yl)-L-lysine using a (13)C-labeled internal standard

Syntheses of the labeled Amadori compound [(13)C(6)]-N(epsilon)-(1-deoxy-D-fructos-1-yl)-L-lysine ([(13)C(6)]-DFLys) and the labeled glycated tetrapeptide Ala-[(13)C(6)]-DFLys-Leu-Gly are presented. The compounds were used in the development of stable isotope dilution assays for the quantification of the degree of glycosylation of bovine serum albumin treated for 20 min at 95 degrees C in the presence of glucose. The experiments revealed that the use of the labeled standards in combination with LC/MS allowed the exact quantification of protein-bound DFLys with the high recovery rate of 95% (at a spike level of 150 nmol/mg of protein) and a low detection limit of 5 nmol/mg of protein. The data revealed, however, that DFLys is significantly degraded during the enzymic hydrolysis of the protein backbone generally needed in the quantification procedure and, furthermore, incomplete digestion of the protein was observed. Both sources of errors were clearly overcome by using in particular the labeled peptide as the internal standard.     

Quantitation of the intense aroma compound 3-mercapto-2-methylpentan-1-ol in raw and processed onions (Allium cepa) of different origins and in other Allium varieties using a stable isotope dilution assay

A stable isotope dilution assay was developed for the quantitation of the potent onion odorant 3-mercapto-2-methylpentan-1-ol (1) using mass chromatography and synthesized [(2)H(2)]-3-mercapto-2-methylpentan-1-ol as the internal standard. Application of the newly developed method on onions from different origins revealed amounts between 8 and 32 microg/kg in raw onions, whereas 34-246 microg was found in sliced, stored (50 min), and then cooked onions. In extracts prepared by simultaneous steam distillation-extraction the highest concentrations of 1 were formed, amounting to >1200 microg/kg. The much higher content of 3-mercapto-2-methylpentan-1-ol in cooked onions suggested its formation from specific, yet unkown, precursors enzymatically formed during cutting of raw onions. 1 was for the first time identified and also quantified in other Allium species such as chives, scallions, and leek, whereas surprisingly garlic and bear's garlic did not contain the aroma compound.     

Investigation of volatiles evolution during the alcoholic fermentation of grape must using free and immobilized cells with the help of solid phase microextraction (SPME) headspace sampling

A biocatalyst was prepared by immobilization of Saccharomyces cerevisiae strain AXAZ-1 on delignified cellulosic material (DCM). Repeated batch fermentations were conducted using these biocatalysts and free cells, separately, at temperatures of 20, 15, and 10 degrees C. Solid phase microextraction (SPME) was used in monitoring the formation of volatile alcohols, acetate esters, and ethyl esters of fatty acids. The kinetics of volatile production were similar for free and immobilized cells. In all cases immobilized cells showed a better rate of volatile production, which was directly connected to sugar consumption. The main difference observed was in propanol production, which increased with temperature decrease for the immobilized cells, whereas it remained constant for the free ones. In the case of immobilized cells significant amounts of esters were also produced. It is well-known that esters contribute to the fruity aroma of wine. It was also established that SPME is a very sensitive, accurate, and reliable technique and can be used without any reservation in the characterization of volatile constituents of wine.     

Screening of tropical fruit volatile compounds using solid-phase microextraction (SPME) fibers and internally cooled SPME fiber

In this study, the optimization and comparison of an internally cooled fiber [cold fiber with polydimethylsiloxane (PDMS) loading] and several commercial solid-phase microextraction (SPME) fibers for the extraction of volatile compounds from tropical fruits were performed. Automated headspace solid-phase microextraction (HS-SPME) using commercial fibers and an internally cooled SPME fiber device coupled to gas chromatography-mass spectrometry (GC-MS) was used to identify the volatile compounds of five tropical fruits. Pulps of yellow passion fruit (Passiflora edulis), cashew (Anacardium occidentale), tamarind (Tamarindus indica L.), acerola (Malphigia glabra L.), and guava (Psidium guajava L.) were sampled. The extraction conditions were optimized using two experimental designs (full factorial design and Doehlert matrix) to analyze the main and secondary effects. The volatile compounds tentatively identified included alcohols, esters, carbonyl compounds, and terpernes. It was found that the cold fiber was the most appropriate fiber for the purpose of extracting volatile compounds from the five fruit pulps studied.     

Quantification of free and bound pantothenic acid in foods and blood plasma by a stable isotope dilution assay

A stable isotope dilution assay for quantification of pantothenic acid in food and blood plasma uses a 4-fold labeled isotopomer of the vitamin as an internal standard. Pantothenic acid and its labeled analogue were detected as trimethylsilyl derivatives by gas chromatography-mass spectrometry, showing a minimized spectral overlap. In starch a detection limit of 44 microg/kg, an intrasample relative standard deviation of 6.7%, and recovery values ranging between 97.5 and 99.4% were determined. Total pantothenic acid content was determined in rice, milk powder, apple juice, and blood plasma after enzymatic hydrolysis of the vitamin's conjugates; free pantothenic acid was quantified prior to enzyme treatment. Almost all results were found to be in good agreement with literature data.     

Quantitative analysis of N-phenylpropenoyl-L-amino acids in roasted coffee and cocoa powder by means of a stable isotope dilution assay

Since recent reports on the role of N-phenylpropenoyl-L-amino acids as powerful antioxidants and key contributors to the astringent taste of cocoa nibs, there is an increasing interest in the concentrations of these phytochemicals in plant-derived foods. A versatile analytical method for the accurate quantitative analysis of N-phenylpropenoyl-L-amino acids in plant-derived foods by means of HPLC-MS/MS and synthetic stable isotope labeled N-phenylpropenoyl-L-amino acids as internal standards was developed. By means of the developed stable isotope dilution assay (SIDA), showing recovery rates of 95-102%, 14 N-phenylpropenoyl-L-amino acids were quantified for the first time in cocoa and coffee samples. On the basis of the results of LC-MS/MS experiments as well as cochromatography with the synthetic reference compounds N-[3',4'-dihydroxy-(E)-cinnamoyl]-L-tryptophan, N-[4'-hydroxy-(E)-cinnamoyl]-L-tryptophan, and N-[4'-hydroxy-3'-methoxy-(E)-cinnamoyl]-L-tyrosine, respectively, were detected for the first time in cocoa powder, and (-)-N-[4'-hydroxy-(E)-cinnamoyl]-L-tyrosine, (-)-N-[3',4'-dihydroxy-(E)-cinnamoyl]-L-tyrosine, N-[4'-hydroxy-3'-methoxy-(E)-cinnamoyl]-L-tyrosine, (+)-N-[3',4'-dihydroxy-(E)-cinnamoyl]-L-aspartic acid, (+)-N-[4'-hydroxy-(E)-cinnamoyl]-L-aspartic acid, N-[3',4'-dihydroxy-(E)-cinnamoyl]-L-tryptophan, N-[4'-hydroxy-(E)-cinnamoyl]-L-tryptophan, and N-[4'-hydroxy-3'-methoxy-(E)-cinnamoyl]-L-tryptophan, respectively, were detected for the first time in coffee beverages.     

Development of a stable isotope dilution assay for the quantification of 5-methyl-(E)-2-hepten-4-one: application to hazelnut oils and hazelnuts.

A stable isotope dilution assay was developed for the quantitation of the hazelnut odorant 5-methyl-(E)-2-hepten-4-one by mass chromatography using synthesized [(2)H](2)-5-methyl-(E)-2-hepten-4-one as the internal standard. Application of the method on two batches of commercial hazelnut oils, processed from either roasted or unroasted nuts, revealed 6.4 microg 5-methyl-(E)-2-hepten-4-one per kg of unroasted oil whereas 315.8 microg per kg was determined in the roasted nut oil. The about 50-fold higher amount of 5-methyl-(E)-2-hepten-4-one in roasted hazelnut oil suggested the necessity of a thermal treatment to generate the flavor compound. Pan frying of raw hazelnuts (9 to 15 min) or boiling of the crushed nut material for 1 h in water led to an increase of 5-methyl-(E)-2-hepten-4-one by factors of 600 and 800, respectively, thereby corroborating that the major part of the nut flavorant is formed during heat treatment from a yet unknown precursor in hazelnuts.     

Quantitation of N2-[1-(1-carboxy)ethyl]folic acid, a nonenzymatic glycation product of folic acid, in fortified foods and model cookies by a Stable isotope dilution assay

A stable isotope dilution assay (SIDA) for the quantitation of N(2)-[1-(carboxy)ethyl]folic acid (CEF) has been developed by using [(2)H(4)]CEF as the internal standard. After sample cleanup by anion exchange chromatography, the three-dimensional specifity of liquid chromatography-tandem mass spectrometry enabled unequivocal determination of the nonenzymatic glycation product of folic acid (FA). When CEF was added to cornstarch, the detection limit for CEF was found to be 0.4 microg/100 g, and a recovery of 98.5% was determined. In analyses of cookies, the intra-assay coefficient of variation was 8.0% (n = 5). Application of the SIDA to commercial cookies produced from wheat flour fortified with FA revealed CEF contents of up to 7.1 microg/100 g, which accounted for approximately 10-20% of the cookies' FA content. In baby foods, multivitamin juices, and multivitamin sweets, however, CEF was not detectable. Further studies on CEF formation during baking of cookies made from fortified flour and different carbohydrates revealed that fructose was most effective in generating CEF followed by glucose, lactose, and sucrose with 12.5, 3.9, 2.5, and 2.5 microg/100 g of dry mass, respectively. During baking, approximately 50% of FA was retained for both monosaccharides fructose and glucose, and 77% as well as 85% of its initial content was retained for the disaccharides lactose and sucrose, respectively. Of the degraded amount of FA, CEF comprised 28% for fructose as well as 18, 12, and 8% for sucrose, lactose, and glucose, respectively. Therefore, CEF can be considered an important degradation product of FA in baked foods made from fructose. To retain a maximum amount of FA, products should rather be baked with sucrose than with reducing carbohydrates.     

Development of a stable isotope dilution assay for the quantitation of glycidamide and its application to foods and model systems

On the basis of a stable isotope dilution assay and derivatization with 2-mercaptobenzoic acid, the presence of the carcinogenic glycidamide ( 2) in processed foods was verified for the first time. Using (13)C-labeled 2 as the internal standard and the formation of the thioether derivatives, a new stable isotope dilution assay for the quantitation of 2 was developed. Application of the method on several potato samples revealed amounts between 0.3 and 1.5 mug/kg depending on the processing conditions. In a model experiment, the formation of 2 by an epoxidation of the double bond in acrylamide, that is, by a reaction with linoleic acid hydroperoxides, was established. This result was in good agreement with data showing that French fries processed in sunflower oil, which is high in linoleic acid, contained more 2 as compared to fries prepared in coconut oil. The derivatization procedure allows the simultaneous quantitation of acrylamide and glycidamide in foods.     

Headspace solid phase microextraction (SPME) analysis of flavor compounds in wines. Effect of the matrix volatile composition in the relative response factors in a wine model.

The application of headspace solid phase microextraction (SPME) for flavor analysis has been studied. Headspace SPME sampling was tested for nine common wine flavor compounds in 10% (v/v) aqueous ethanol: linalool, nerol, geraniol, 3-methyl-1-butanol, hexanol, 2-phenylethanol, ethyl hexanoate, ethyl octanoate, and ethyl decanoate. The chemical groups (monoterpenoids, aliphatic and aromatic alcohols, and esters) showed specific behavior in SPME analysis. SPME sampling parameters were optimized for these components. Relative response factors (RRFs), which establish the relationship between the concentration of the compound in the matrix liquid solution and the GC peak area, were estimated for all compounds. Log(10)(RRF) varied from 0 (3-methyl-1-butanol) to 3 (ethyl decanoate), according to their molecular weight. Quantification by SPME was shown to be highly dependent on the matrix composition; the compounds with higher RRF were the less affected. As a consequence, the data obtained with this methodology should be used taking into consideration these limitations, as shown in the analysis of four monovarietal Bairrada white wines (Arinto, Bical, Cerceal, and Maria Gomes).     

Headspace sorptive extraction (HSSE), stir bar sorptive extraction (SBSE), and solid phase microextraction (SPME) applied to the analysis of roasted Arabica coffee and coffee brew.

Headspace sorptive extraction (HSSE) and stir bar sorptive extraction (SBSE), two recently introduced solventless enrichment techniques, have been applied to the analysis of the headspace of Arabica roasted coffee and of the headspace of the brew and of the brew itself. In both HSSE and SBSE enrichment is performed on a thick film of poly(dimethylsiloxane) (PDMS) coated onto a magnet incorporated in a glass jacket. Sampling is done by placing the PDMS stir bar in the headspace (gas phase extraction or HSSE) or by immersing it in the liquid (liquid phase extraction or SBSE). The stir bar is then thermally desorbed on-line with capillary GC-MS. The performance of HSSE and SBSE have been compared through the determination of the recoveries and relative abundances of 16 components of the coffee volatile fraction to classical static headspace (S-HS) and to headspace and in-sample solid phase microextraction (HS-SPME and IS-SPME, respectively) applying the fibers PDMS 100 microm, Carbowax/divinylbenzene 65 microm (CW/DVB), Carboxen/PDMS 75 microm(CAR/PDMS), polyacrylate 85 microm(PA), PDMS/divinylbenzene 65 microm(PDMS/DVB), and Carboxen/divinylbenzene/PDMS 50-30 microm(CAR/PDMS/DVB). In all cases, HSSE and SBSE gave higher recoveries, and this is entirely due to the high amount of PDMS applied.     

Chemoenzymatic synthesis of homochiral (R)- and (S)-karahanaenol from (R)-limonene

Terpinolene oxide, a monoterpene belonging to the p-menthane group, is easily derived from naturally abundant (R)-limonene. It was isomerized with montmorillonite clay catalyst to karahanaenone (2,2, 5-trimethylcyclohept-4-en-1-one) by ring enlargement. The enantiomers of the corresponding alcohol, karahanaenol (2,2, 5-trimethylcyclohept-4-en-1- ol), known for their individual organoleptic properties, were resolved through Pseudomonas cepacia lipase mediated enantiospecific alcoholysis of its acetate derivative.     

Quantitative determination of sulfur-containing wine odorants at sub parts per billion levels. 2. Development and application of a stable isotope dilution assay

[(2)H(10)]-4-Mercapto-4-methylpentan-2-one (d(10)-1), [(2)H(2)]-3-mercaptohexan-1-ol (d(2)-2), and [(2)H(5)]-3-mercaptohex-1-yl acetate (d(5)-3), deuterated analogues of impact odorants of wines, were used to determine quantitatively the natural compounds in white wines (Muscadet, Sauvignon, and Bacchus) with a stable isotope dilution assay using gas chromatography coupled either with ion trap tandem mass spectrometry (GC-ITMS-MS) or with atomic emission detection monitored on sulfur-selective acquisition (GC-AED). The thiol compounds were recovered from wines by liquid-liquid extraction, then purified from the wine extracts by covalent chromatography, and analyzed. The quantitative determination of 4-mercapto-4-methylpentan-2-one 1 in the wines that were analyzed was performed better with GC-AED than with GC-ITMS-MS under the conditions that were used. However, the detection limit of the method was higher than the odor threshold of 4-mercapto-4-methylpentan-2-one 1 in wine (5 vs 0.8 ng/L). The levels of this compound in the Sauvignon and Bacchus wines were much higher than its odor threshold, but it was not detectable in the Muscadet wines. On the contrary, GC-ITMS-MS was much more sensitive than GC-AED for detection of 3-mercaptohexan-1-ol 2 and 3-mercaptohex-1-yl acetate 3, and the detection limits were much lower than their odor thresholds in wine. The former compound was detected in all of the Muscadet wines that were analyzed at levels always higher than its odor detection threshold, while the latter occurred at levels higher than its odor threshold in only one Muscadet wine.     

Analysis of aldehydes in beer using solid-phase microextraction with on-fiber derivatization and gas chromatography/mass spectrometry

A new, fast, sensitive, and solventless extraction technique was developed in order to analyze beer carbonyl compounds. The method was based on solid-phase microextraction with on-fiber derivatization. A derivatization agent, O-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine (PFBOA), was absorbed onto a divinyl benzene/poly(dimethylsiloxane) 65-microm fiber and exposed to the headspace of a vial with a beer sample. Carbonyl compounds selectively reacted with PFBOA, and the oximes formed were desorbed into a gas chromatograph injection port and quantified by mass spectrometry. This method provided very high reproducibility and linearity. When it was used for the analysis of aged beers, nine aldehydes were detected: 2-methylpropanal, 2-methylbutanal, 3-methylbutanal, pentanal, hexanal, furfural, methional, phenylacetaldehyde, and (E)-2-nonenal.     

A new LC/MS-method for the quantitation of acrylamide based on a stable isotope dilution assay and derivatization with 2-mercaptobenzoic acid. Comparison with two GC/MS methods

Acrylamide (AA) was found to form a stable thioether in reasonable yields (45-50%) when reacted with 2-mercaptobenzoic acid at 20 degrees C for 3 h. On the basis of this finding and using [(13)C(3)]-acrylamide as the internal standard, a sensitive and selective new stable isotope dilution analysis for AA quantitation in food samples was developed based on single stage LC/MS. Comparison of the quantitative results obtained by applying the new method to potato chips, crispbread or butter cookies with data obtained by two stable isotope dilution analysis, using direct measurement of AA by GC/MS, but differing in the workup procedure, revealed detection limits in the same order of magnitude (6.6 microg/kg). Quantitative data obtained by application of the three methods on the same samples of potato chips or cookies, respectively, were also in very good agreement. Quantitation of AA in crispbreads treated with an amylase/protease mixture did not show increased AA levels, thereby indicating that inclusion of AA in starch/protein gels is not very probable during breadmaking.     

Biotransformation of glucosinolates epiprogoitrin and progoitrin to (R)- and (S)-Goitrin in Radix isatidis

Radix isatidis is an important traditional Chinese medicine with antiviral efficacy. (R)- and (S)-Goitrin are its main bioactive constituents in the 2010 edition of the Chinese Pharmacopoeia. (R)- and (S)-Goitrin are the breakdown products of epiprogoitrin and progoitrin from R. isatidis. The biotransformation of glucosinolates epiprogoitrin and progoitrin to (R)- and (S)-goitrin, however, is still unclear. In the current paper, the biotransformation of glucosinolates was studied. First, the high-performance liquid chromatography methods to analyze glucosinolates and their breakdown products were developed. Then, the biotransformation of individual glucosinolates such as epiprogoitrin and progoitrin was investigated under different pH conditions. Lastly, their biotransformation under five extraction environments was studied. The results showed that (R)- and (S)-goitrin were the most noteworthy breakdown products. Their relative transformation rates were about 70-80%, and the influence of different extraction environments on the transformation rate was not significant. These results would serve as a theoretical basis for industrial production and quality control and would be helpful for further studies on the biotransformation of glucosinolates.