Effect of treatment on composition and protein and energy utilization of rice and mung bean by rats

Yellow rice derived from stack-burned unthreshed grains had lower lysine content than white milled rice. Stack burning did not affect energy digestibility in growing rats but decreased true nitrogen digestibility and net protein utilization (NPU). Increasing parboiling time from 20 to 60 min had no adverse effect on energy and protein utilization of parboiled milled rice. Defatting of rice bran-polish with petroleum ether at 50°C had no effect on protein utilization but decreased energy content and utilization. Mechanical dehulling of mung bean (Vigna radiata [L.] Wilczek) reduced fiber content, increased energy and protein digestibility but decreased biological value (BV) and NPU. Toasting and winnowing the bean reduced lysine content, improved digestible energy but decreased BV and NPU. Cooking the bean preparations improved the biological value only in mechanically dehulled bean with resultant higher NPU than that of whole bean.     

Rice-based pasta: A comparison between conventional pasta-making and extrusion-cooking

Good quality gluten-free products continue to be in demand among the celiac community and the production of pasta from non-conventional raw materials is a major technological challenge. In this work, the effects of two different pasta-making processes (conventional and extrusion-cooking) were investigated on parboiled brown and milled rice flours. The two processes differentiated for extrusion temperature (conventional extrusion: 50 °C, max; extrusion-cooking: 115 °C), whereas the drying diagram was the same. Starch modifications induced by each pasta-making process were analyzed by using a Micro-ViscoAmylo-graph (MVAG), Differential Scanning Calorimetry (DSC), and X-ray Diffraction. The cooking quality was evaluated by weight increase, solid loss into the cooking water, and texture analysis. Pasta obtained from milled rice using the extrusion-cooking process was characterized by the best cooking behavior. In this sample, starch presented the highest peak and final viscosities, the highest gelatinization temperature and lower enthalpy value, and the lowest crystallinity. The cooking quality of pasta obtained from brown rice appeared less affected by the processing conditions. Therefore, the nature and intensity of starch modifications can be modulated by the processing conditions and might explain the different cooking behaviour of rice pasta.     

Estimating Glycemic Index of Rice-Based Mixed Meals by Using Predicted and Adjusted Formulae

The estimation of glycemic index(GI) of rice-based mixed meal either by using predicted GI(GI_(pred)) or adjusted GI(GI_(adj)) formula is unclear.This study aimed to determine the glycemic response of rice in rice alone or mixed meals and to identify the appropriate formula for estimating the GI of rice-based mixed meals.The glycemic responses produced by the rice alone(red rice,fragrant white rice or parboiled rice) and the rice-based mixed meals(fried red rice,fried fragrant white rice or fried parboiled rice) which provided 25 g available carbohydrate were assessed in 11 healthy individuals.To determine the measured GI(GImeasured) of rice alone and rice-based mixed meals,participants underwent three repeated tests of a reference food(Glucolin~?).Tests were performed in random order on nine separate visits after an overnight fasting for at least 8 h.Capillary glucose at baseline(0 min),15,30,45,60,90 and 120 min from starting the meals was assessed and used to determine the incremental area under the curve(iAUC_(120)).The agreement between GImeasured and the estimation formulae(GI_(pred) or GI_(adj)) were determined using Bland-Altman analysis.The iAUC_(120) after consuming rice alone was significantly higher than the rice-based mixed meals except for fried fragrant rice,which was comparable to the rice alone(P 0.05).The GI_(measured) values of rice were categorized as medium(61 for parboiled rice,67 for fragrant white rice,and 68 for red rice).GI_(pred)(r = 0.40,P 0.01) and GI_(adj)(r = 0.41,P 0.01) were significantly correlated with iAUC_(120).The agreement between GI_(measured) and GI_(adj) is apparent suggesting the usefulness of GI_(adj) in estimating meal GI of rice-based mixed meals.     

Water penetration into rice grains during soaking observed by gradient echo magnetic resonance imaging

The water penetration into a rice grain during soaking was monitored by three-dimensional gradient echo magnetic resonance imaging, which has the advantage of a short measurement time and a sufficient sensitivity for low-moisture samples. The water penetration route was compared between the milled and brown rice grains of two japonica cultivars. In normal milled rice grains of Koshihikari, water first penetrated the ventral side surface and the embryo attachment site of the endosperm, then migrated along the central line and transverse cracks, and finally diffused to all parts of the endosperm. In milled rice grains of Yamadanishiki with a white core, water quickly infiltrated into the cracks or chalky parts on the dorsiventral line and then diffused to the lateral side. In brown rice grains of both cultivars water penetrated extremely slowly and did not infiltrate directly into transverse cracks or the white core due to inhibition by the pericarp and seed coat. The central part of every grain allowed more water to penetrate. The route, pattern and speed of water penetration were determined by the morphological structure, crack formation and hardness distribution associated with the packing of the starch granules in the grain.     

Water penetration into rice grains during soaking observed by gradient echo magnetic resonance imaging

The water penetration into a rice grain during soaking was monitored by three-dimensional gradient echo magnetic resonance imaging, which has the advantage of a short measurement time and a sufficient sensitivity for low-moisture samples. The water penetration route was compared between the milled and brown rice grains of two japonica cultivars. In normal milled rice grains of Koshihikari, water first penetrated the ventral side surface and the embryo attachment site of the endosperm, then migrated along the central line and transverse cracks, and finally diffused to all parts of the endosperm. In milled rice grains of Yamadanishiki with a white core, water quickly infiltrated into the cracks or chalky parts on the dorsiventral line and then diffused to the lateral side. In brown rice grains of both cultivars water penetrated extremely slowly and did not infiltrate directly into transverse cracks or the white core due to inhibition by the pericarp and seed coat. The central part of every grain allowed more water to penetrate. The route, pattern and speed of water penetration were determined by the morphological structure, crack formation and hardness distribution associated with the packing of the starch granules in the grain.     

Fortification of rice with folic acid using parboiling technique: Effect of parboiling conditions on nutrient uptake and physical characteristics of milled rice

Parboiling was used as a technique for folic acid fortification in brown rice. A range of parboiling conditions (i.e. 70 °C soaking for 1, 2 and 3 h with 0.15, 0.3, 0.6 and 1.2 g folic acid/300 g brown rice and milled for 0, 60 and 120 s) were studied to investigate the uptake of folic acid in the fortified rice. Approximately 20–300 μg folic acid/g was found in the fortified rice and an average of 90% of folic acid was retained in the washed and cooked fortified rice. The quality of the fortified rice was evaluated based on head rice yield (HRY), kernel dimensions and color. No significant change in HRY and grain dimensions were observed between raw and fortified rice, suggesting the economic value of rice will not be compromised with the fortification process and rice uniformity may likely be achieved after mixing with the untreated rice. Despite the inherent yellow color of folic acid, in comparison with parboiled rice, a significant difference in yellowness was exhibited only in rice fortified at 1.2 g folic acid/300 g brown, but not among those fortified at lower fortificant concentrations. The difference in lightness (ΔL^∗) (between fortified rice and parboiled rice) was reduced as soaking duration increased.     

The influence of milling on the nutritive value of flour from cereal grains. 4. Rice

Brown and milled rices were prepared from rough rice, and the nutritive value of the rices was studied by chemical analyses and in balance experiments with growing rats. The concentration of essential nutrients decreased with the degree of milling, but the energy density of brown and milled rices was similar. In the highly refined white rice the protein content was reduced to 86% and the mineral content to 23% of corresponding levels in brown rice. The zinc concentration was halved. The amino acid composition was rather unaffected by the degree of milling, but the lysine concentration was slightly lower in white rice than in brown rice. Milling was accompanied by an increase in true protein digestibility and a corresponding decrease in biological value. Thus net protein utilization of the different rices was remarkably uniform. A total of 33% of the utilizable protein and 22% of the digestible energy in brown rice was removed during milling. Rats fed rough, brown and lightly milled rices were unable to maintain their femur zinc concentration; deposition of calcium and phosphorus also appeared to be affected. Factors present in the outer part of the rice kernel interfere strongly with zinc utilization. Phytate and/or fibre are not solely responsible for this effect. Unless rice was milled into highly refined white rice, zinc status of rats was adversely affected. The results suggest that zinc might be a limiting factor in rice-based diets.     

水稻不同插秧密度对产量及精米率的影响

以不同插秧密度对水稻产量及精米率的影响进行了研究,结果表明:水稻不同插秧密度对生育期没有影响,但对产量及精米率却有一定影响,其中以30 cm×13.2 cm的插秧密度产量最高,比对照增产4.85%,其次是30 cm×10 cm,比对照增产3.94%。随着穴距的加大,产量逐渐下降,穴距超过20 cm以上,减产幅度大。从精米率看,以30 cm×13.2 cm的插秧密度精米率最高,其精米产量也最高,比对照增产8.77%;30 cm×10 cm插秧密度的稻谷虽然比对照增产极显著,但精米率低,远远低于30 cm×13.2 cm的精米产量,且中感叶瘟病和轻微穗颈瘟及二化螟,其它处理只有轻微叶瘟的发生,却无穗颈瘟和二化螟的危害。     

留胚米加工专用品种筛选研究

针对留胚米产业化生产时出现的留胚率低、碎米率高、食味差等问题,以2011年收获的黑龙江省、吉林省、辽宁省的60个粳稻品种为试验材料,采用SATAKE-TM05试验级碾米机进行留胚米加工试验,筛选留胚率较高的品种,并对留胚率高的品种测定留胚米饭的感官评分和食味综合评分,选出留胚率高且感官评分高的品种;对样品的碾磨品质如糙米率、碾白率及外观品质如糙米白度、精米白度、碎米率、不完善粒率等进行分析检验。结果表明,60个样品中留胚率较高且感官评分较高的品种有6个,即龙稻10号、牡丹江27、牡丹江28、牡丹江30、吉粳95和松粳9;留胚率与碾白率和精米白度相关性较好,与碾白率呈极显著正相关,与精米白度呈极显著负相关,与糙米率呈显著负相关,与不完善粒率呈显著正相关。     

Challenges and opportunities for improving N use efficiency for rice production in sub-Saharan Africa

ABSTRACT

In sub-Saharan Africa (SSA), rice production from smallholder farms is challenged because of a lack of fertilizer inputs and nutrient-poor soils. Therefore, improving nutrient efficiency is particularly important for increasing both fertilizer use and rice yield. This review discusses how to improve the return from fertilizer input in terms of agronomic N use efficiency (AE_N), that is, the increase in grain yield per kg of applied N, for rice production in SSA. The AE_N values we summarized here revealed large spatial variations even within small areas and a certain gap between researcher-led trials and smallholder-managed farms. Experimental results suggest AE_N can be improved by addressing spatial variations in soil-related factors such as P, S, Zn, and Si deficiencies and Fe toxicity in both irrigated and rainfed production systems. In rainfed production systems, differences in small-scale topography are also important which affects AE_N through dynamic changes in hydrology and variations in the contents of soil organic carbon and clay. Although empirical evidence is further needed regarding the relationship between soil properties and responses to fertilizer inputs, recent agricultural advances have generated opportunities for integrating these micro-topographical and soil-related variables into field-specific fertilizer management. These opportunities include UAV (unmanned aerial vehicle) technology to capture microtopography at low cost, database on soil nutrient characteristics at high resolution and more numbers of fertilizer blending facilities across SSA, and interactive decision support tools by use of smartphones on site. Small-dose nursery fertilization can be also alternative approach for improving AE_N in adverse field conditions in SSA.

ABBREVIATIONS: AE_N: agronomic nitrogen use efficiency; FISP: farm input subsidy program; VCR: value cost ratio; SOC: soil organic carbon; SSA: sub-Saharan Africa; UAV: unmanned aerial vehicle     

Addressing current and future problems of parasitic weeds in rice

Significant areas of rain-fed rice in the Sahel, savannah and derived savannah zones of sub-Saharan Africa (SSA), Madagascar and other Indian Ocean Islands are infested by parasitic weeds. The affected area accommodates some of the poorest farmers of the world. Without appropriate management parasitic weeds in rice are expected to increase in importance in SSA due to their general invasive nature and their abilities to adapt to changing conditions such as imposed by predicted climate changes. The most important parasitic weeds in rice are: Striga hermonthica, Striga asiatica, Striga aspera and Rhamphicarpa fistulosa. The first two are primarily found in free-draining uplands while S. aspera is also found on hydromorphic soils and R. fistulosa is restricted to unimproved lowlands including inland valleys. As parasitic weeds are typical production constraints in subsistence rice production, targeting them would directly contribute to poverty alleviation and food security. This paper provides an overview of the problems caused by parasitic weeds in rice and discusses management options and opportunities for research for development.     

Relationship Between Degree of Starch Gelatinization and Quality Attributes of Parboiled Rice During Steaming

Paddy rice samples were parboiled by soaking at 65 °C for 180 min and steaming at 96 °C for 2–10 min, and then dried to achieve the final moisture content of 11% ± 1%. The degree of starch gelatinization(DSG) and several quality attributes(head rice yield(HRY), color value and hardness) of parboiled rice were measured. Results showed that DSG(46.8%–77.9%), color value(18.08–19.04) and hardness(118.6–219.2 N) all increased following steaming. In contrast, the HRY increased(64.8%–67.1%) for steaming times between 2–4 min but decreased(67.1%–65.0%) for steaming times between 4–10 min. Linear relations between DSG and color value(R~2 = 0.87), and DSG and hardness(R~2 = 0.88) were observed. The suitable DSG of parboiled rice leading to the highest HRY was found to be 62.5%, obtained following 4 min of steaming.     

Rice Drying,Storage and Processing: Effects of Post-Harvest Operations on Grain Quality

Various post-harvest processes of rice are commonly employed, especially during the off-season, to ensure its consumption feasibility, which often affect the grain quality. Different forms of drying, storage and processing of rice are evaluated to identify their effects on grain quality. Microwave drying has emerged as an alternative to the widely-used intermittent-drying and fixed-bed-dryer methods of drying paddy rice. Control of drying-air temperatures (between 40 °C and 60 °C) according to the rice variety can improve quality, especially for exotic varieties. Keeping stored grain in hygroscopic balance, with water content between 11% to 15%, at temperatures between 16 °C and 20 °C and with intergranular relative humidity near 60%, allows 12 months of storage in a controlled environment without significant deterioration. Other innovations, notably the application of artificial refrigeration to grain stored in bulk in vertical cylindrical silos and the use of impermeable packaging for storage, ensure the conservation of grain mass. The different stages and equipments used to obtain polished, brown and parboiled rice result in significant changes in the nutritional value of rice because of the removal of the outermost layers of the grains. Polishing reduces the nutritional value and physical homogeneity of rice. Brown rice retains more bioactive compounds and nutrients because it does not lose the outer layer of the grains in the polishing processes. Parboiled rice, although less nutritious than brown rice, has better grain integrity and milling yield and less loss of nutrients than white rice.     

Rice Bran Oil Extraction by Screw Press Method:Optimum Operating Settings,Oil Extraction Level and Press Cake Appearance

The appearance of rice bran ’cake’ or discharge from a screw press corresponds to the level of oil produced in the extraction process.The relationships between operating settings,oil extraction level and cake appearance were studied.Cake characteristics reliably indicate the expected oil recovery extraction level.These conclusions applyed to both Chainat 1 rice bran and parboiled rice bran.Variables were the speed of the screw press(set at five levels from 8.5 to 19.8 r/min) and corresponding clearance distances between the screw and barrel(set between 1.0 and 1.9 cm).Results showed that the maximum levels of extraction were 4.17% for the rice bran and 8.20% for the parboiled rice bran.At the maximum extraction level,the apparatus continuously discharged cake that were hard,crispy,flaky,shiny and polished on one side but dull and coarse on the other.     

Developing fertilizer recommendations for rice in Sub-Saharan Africa,achievements and opportunities

Improving agricultural productivity to keep pace with the fast-growing food demand is a huge challenge for sub-Saharan Africa (SSA). Fertilizer is a powerful productivity-enhancing input; nevertheless, farmers of SSA use only 5–9 kg ha^?1 of fertilizer, which is ten times lesser than Latin America and Asia (50 and 80 kg ha^?1, respectively). Rice (Oryza sativa) is one of the most important food crops of SSA, and its consumption is growing faster than any other commodity in Africa. Rice-based systems have high potential for improving food production through an efficient management of fertilizers. The biophysical environment, cropping systems and socio-economic status of farmers including market opportunities are the main factors for developing appropriate fertilizer recommendations. Many research efforts have been invested in different countries to develop fertilizer recommendation for rice. However, the diversity of rice ecologies, the type and the cost of fertilizers available on local market are the main constraints for development of blanket recommendations of fertilizer usually applied in many countries. Here, we make a reviews of the progress made on the development of fertilizer recommendations for rice-based systems in SSA. The utilization of the new concepts and decisions support tools for development of fertilizer recommendation and the main achievements and weakness are discussed. The opportunities offered by the new concepts, modeling and decision support tools are discussed in a regional strategic approach for better management of fertilizers in the diversified ecologies of rice-based systems.     

Starch gelatinization and amylose–lipid interactions during rice parboiling investigated by temperature resolved wide angle X-ray scattering and differential scanning calorimetry

Starch gelatinization and formation of crystalline amylose–lipid complexes during the heat/moisture treatment step in rice parboiling were studied with temperature resolved wide angle X-ray scattering (WAXS) and differential scanning calorimetry (DSC) using flour from Puntal (24% apparent amylose) and Jacinto (12% apparent amylose) rice samples [66, 40 or 25% moisture content (mc)]. Temperature resolved WAXS showed that the crystallinity index (CI, i.e. the relative amount of A-type crystals) of non-parboiled rice flours at 66% mc, monotonically decreased between 65 °C (Puntal) and 70 °C (Jacinto) and 90 °C (both Puntal and Jacinto). These temperatures were in agreement with the respective onset and conclusion temperatures of the M₁ endotherm measured by DSC. At 40% mc, the CI decreased monotonically from 65 °C (Puntal) and 70 °C (Jacinto) until 105 °C. In DSC both M₁ and M₂ endotherms were present. The conclusion temperature of the M₂ endotherm was higher than 105 °C. At 25% mc, the CI decreased very gradually and A-type crystals were no longer present at 145 °C. Under these conditions, no DSC endotherms were detected. No type II amylose–lipid complexes were formed during heating at 66% mc. In contrast, at 40 and 25% mc, V_h-type crystals were formed from 100 and 130 °C, respectively. Non-parboiled white rice flour had a strong A-type pattern. Mildly parboiled rice had a clear A-type, with a weak V_h-type and B-type pattern. Severe parboiling resulted in partially crystalline systems with superimposed A-type, V_h-type and B-type crystals. It was concluded that the rice variety, the combination of mc and the moisture distribution in the rice kernel and the temperature during parboiling all impact the level and the types of crystals in the parboiled rice.     

Physico-chemical Characteristics as Indicators of Starch Availability from Milled Rice

The hypothesis was tested that certain physico-chemical characteristics might be used as indicators of total starch availability and rate of starch availability of milled rice. Milled unparboiled (uPB) and parboiled (PB) rice samples (n=93) were characterized using standardized methods of physical tests and chemical analyses and anin vitromethod was used for measuring the rate of starch digestion on a subsample of rice (n=26). The rice varieties were dominated by medium long, bold rice grain with high amylose rice and intermediate gelatinization temperature (GT), but a wide range in all characteristics was measured. Small amounts of resistant starch (RS) were measured in the cooked rice, indicating virtually complete starch availability. The RS of PB rice (0·4 g/100 g rice as eaten) was significantly (P<0·004) higher than the RS of uPB rice (0·1 g/100 g) however. The rate of starch digestion was significantly affected by both variety and parboiling. The starch digestion index (SDI) values of the PB samples (mean value 73·7) were significantly (P<0·001) lower than those of the uPB samples (mean value 79·0). The apparent amylose content (AC) was the strongest determinant for SDI in both uPB and PB rice. The widths and shapes of the raw grains and the elongation after cooking were correlated significantly with SDI values for the uPB rice, while the relatively mild parboiling procedure followed in this study eliminated this correlation. The minimum cooking times were correlated significantly with the SDI values in the uPB samples.     

Effect of soaking temperature on commingled rice properties

Parboiling involves soaking, steaming, and drying, and soaking is important in achieving desired parboiled rice properties. This study investigated the effects of soaking temperature and commingling on rice properties prior to steaming. Rough rice of four cultivars (Taggart, CL151, XL753, and CL XL745) and their combinations at 1:1 wt ratio were soaked at 65, 70 or 75 °C for 3 h, and dried. Both soaking temperature and difference in onset gelatinization temperature (T_o) of individual cultivars in commingled rice affected milling and physicochemical properties. The head brown rice yield was greater when the soaking temperature was below but close to the T_o for individual rice cultivars, but became difficult to predict for commingled rice. Commingled rice consisting of high T_o rice cultivars required higher soaking temperatures to reduce chalkiness during soaking. The color attributes of commingled rice was predominately affected by the cultivar that exhibited the most change. The gelatinization properties were governed by the low-T_o cultivar, whereas the pasting properties were more influenced by the high-T_o cultivar for the commingled rice. Therefore, using commingled rice with a wide range of gelatinization temperature as a feedstock may lead to inconsistent quality of parboiled rice.     

稻米出饭特性QTL分析及遗传研究

 米粒长、饭粒长和饭粒延伸系数等性状与米饭品质密切相关。以籼稻台中本地1号（TN1）与粳稻春江06为亲本构建的加倍单倍体群体为材料,利用全基因饱和分子标记连锁遗传图谱对多个稻米出饭特性相关的性状进行QTL定位, 共检测到14个QTL。其中,米粒长和米粒浸长QTL各1个,均位于第2染色体上,分别可以解释性状变异的15.20% 和1850%;1个米粒浸泡膨胀率QTL,位于第6染色体上,可解释性状变异的1339%;1个煮饭粒长QTL,位于第9染色体上,可解释性状变异的1360%; 3个蒸饭粒长QTL,分别位于第1、3和12染色体上,共解释性状变异4500%;4个煮饭延伸率QTL, 分别位于第3、6、9和10染色体上,共解释性状变异6130%; 3个蒸饭延伸率QTL分别位于第1、3和6染色体上,共解释性状变异4910%。在已知的Wx和ALK基因所在区域都检测到了米饭延伸性相关的QTL。相比较而言,覆盖ALK基因的QTL对出饭特性的影响更大,LOD值达到了635。该研究结果可为稻米出饭特性相关调控基因的克隆奠定基础,同时对稻米品质的改良及高产优质稻品种的分子标记辅助选育提供理论参考。     

两个籼稻品种垩白对稻米蒸煮食味与营养品质的影响

以冈优527(杂交籼稻)和窄叶青8号(常规籼稻)为材料,研究垩白对稻米蒸煮食味品质及营养品质的影响。与非垩白米相比,冈优527垩白米的直链淀粉含量极显著升高,最终黏度、消减值、回复值显著升高,胶稠度、峰值黏度、崩解值显著降低,RVA谱的其余指标无显著变化。窄叶青8号垩白米与非垩白米的上述各指标间无显著差异。窄叶青8号垩白米的粗蛋白含量显著低于非垩白米,而冈优527垩白米的粗蛋白含量与非垩白米相比无显著变化。2个品种垩白米的清蛋白、球蛋白、醇溶蛋白、赖氨酸含量与非垩白米间无显著差异, 但谷蛋白含量显著低于非垩白米。