共查询到20条相似文献,搜索用时 31 毫秒
1.
Canadian Western Red Spring (CWRS) market class is the predominant type of wheat (Triticum aestivum L.) grown in Canada since the turn of the 20th century. Wheat cultivars ranging from cv. Red Fife to cv. Superb were field tested in a series of 24 replicated trials spanning 19 years in central Saskatchewan, Canada. The objective of this study was to measure the rate of cultivar improvement in light of relatively narrow end‐use quality definitions for the CWRS market class. Regression of cultivar trait means on year of cultivar registration was used to assess the rate of change in yield, productivity traits, and end‐use quality parameters. Yield levels were estimated to be increasing at a rate of approximately 15 kg/ha per year in 1970 and 23 kg/ha per year in 1995. Days to spike emergence and plant height decreased over time. Kernel weight, grain protein concentration, SDS sedimentation volume, farinograph absorption, and dough development time increased over time, whereas farinograph mixing tolerance index and yellow pigment concentration decreased. The results show that improvement in key agronomic and end‐use traits has been achieved in CWRS wheat. 相似文献
2.
Kernel vitreousness is an important grading characteristic for segregation of subclasses of hard red spring (HRS) wheat in the United States. This research investigated the protein molecular weight distribution (MWD) and the flour and baking quality characteristics of different HRS wheat market subclasses. The U.S. regional crop quality survey samples obtained from six regions for three consecutive growing years were used for subclass segregation based on the dark, hard, and vitreous (DHV) kernel percentage. Flour milled from HRS wheat with greater percentages of DHV kernel showed higher water absorption capacity for breadmaking. Protein MWD parameters could be related to the association between DHV kernel level and water absorption. Specifically, flour protein fractions rich in gliadins and high‐molecular‐weight polymeric proteins in the SDS‐unextractable fraction were identified to have significant and positive correlations with both DHV kernels and flour water absorption levels. An example further showed the importance of flour water absorption on potential economic incentives that can be gained with having a greater percentage of vitreous kernels. This information could help the flour milling and baking industry to segregate the different subclasses of HRS wheat with varying DHV content for their intended end‐use applications. 相似文献
3.
Flour mill streams obtained by milling grain of 10 bread wheat cultivars grown in the Skopje region of Macedonia were analyzed for rheological and breadmaking quality characteristics and for composition of gliadins and HMW‐GS. The objective of this study was to examine the relationships between the composition of gluten proteins and breadmaking quality, as well as to determine the importance of gluten proteins for technological quality of flour mill streams. The grain was milled in an experimental mill according to a standardized milling procedure, with three break and three reduction passages. The addition of two vibratory finishers in the milling scheme enabled better separation of bran. A small‐scale baking method for evaluation of the breadmaking properties was developed, and electrophoretic methods including acid‐PAGE and SDS‐PAGE were used to determine the composition of the gluten proteins. There were significant differences in the degree of dough softening of individual and total flour fractions of the flour mill streams for cultivars with different alleles from six loci, for farinograph water absorption from seven loci, and for bread loaf volume and crumb quality score from six loci. The Glu‐1 quality scores for the wheat cultivars investigated were 3–9 and proved to be a useful indicator of breadmaking quality. The novel feature of the investigation related to the breadmaking potential of the flour mill streams compared with straight‐run flours. 相似文献
4.
Dark, hard, and vitreous kernel content is an important grading characteristic for hard red spring (HRS) wheat in the United States. This research investigated the associations of kernel vitreousness (KV) and protein content (PC) levels with protein molecular weight distribution (MWD), milling quality, and breadmaking quality characteristics of HRS wheat. The U.S. regional crop quality survey samples from three consecutive growing years were combined into three composite samples with different levels of wheat PC and then further segregated into separate samples with three different levels of KV. Analysis of variance showed that KV level had significant (P < 0.001) effect on variation in test weight, break flour yield, and damaged starch content. Among protein MWD parameters analyzed by size‐exclusion HPLC, the high‐molecular‐weight polymeric proteins in the SDS‐unextractable fraction had significant (P < 0.01) association with KV. Regression analysis indicated that addition of KV to the PC level improved the model for both farinograph and baking water absorption values in all three growing years. This information could help the flour milling and baking industries to further segregate HRS wheat based on KV levels in addition to PC levels for their intended end‐use applications. 相似文献
5.
Small kernels of soft wheat are sometimes considered to be harder than larger kernels and to have inferior milling and baking characteristics. This study distinguished between kernel size and kernel shriveling. Nine cultivars were separated into large, medium, and small kernels that had no shriveling. Eleven cultivars were separated into sound, moderate, and severely shriveled kernels. Shriveling greatly decreased the amount of flour produced during milling. It adversely affected all other milling quality characteristics (ash content, endosperm separation index, and friability). Shriveled kernels produced flour that had inferior soft wheat baking qualities (smaller cookie diameter and higher alkaline water retention capacity). In contrast, test weight and milling qualities were independent of kernel size. Small, nonshriveled kernels had slightly better baking quality (larger cookie diameter) than larger nonshriveled kernels. Small kernels were softer than large kernels (measured by break flour yield, particle size index, and flour particle size). Small nonshriveled kernels did not have diminished total flour yield potential or other reduced flour milling characteristics. Those observations suggest a possibility of separating small sound kernels from small shriveled kernels to improve flour yield and the need to improve dockage testing estimation techniques to distinguish between small shriveled and small nonshriveled kernels. 相似文献
6.
Elieser S. Posner Ana A. Chew‐Guevara Marcelo Mitre‐Dieste Esther Perez‐Carrillo Erick Heredia‐Olea Jeff D. Wilson Sergio O. Serna‐Saldivar 《Cereal Chemistry》2014,91(2):139-145
Refined wheat flours commercially produced by five different U.S. and Mexican wheat blends intended for tortilla production were tested for quality and then processed into tortillas through the hot‐press forming procedure. Tortilla‐making qualities of the flour samples were evaluated during dough handling, hot pressing, baking, and the first five days on the shelf at room temperature. The predominant variables that affected the flour tortilla performance were wet gluten content, alveograph W (220–303) and P/L (0.70–0.94) parameters, farinograph water absorption (57%) and stability (10.8–18.7 min), starch damage (5.43–6.71%), and size distribution curves (uniform particle distribution). Flours produced from a blend of Dark Northern Spring (80%) and Mexican Rayon (20%) wheat had the highest water absorption, and tortillas obtained from this blend showed the highest diameter and lowest thickness. The whitest and best textured tortillas were obtained from the flour milled from three hard types of Mexican wheat blend. A Mixolab profile was generated from the best tortilla flours, those produced by mills 3 and 4. The Mixolab profile showed that a good flour for hot‐press tortillas had a relatively lower absorption and short dough mix time compared with a bread flour and should have a significantly higher gluten compared with an all‐purpose flour. Compared with bread flour, the tortilla flour had higher retrogradation and viscosity values. The Mixolab profile proved to be a good preliminary test to evaluate flours for hot‐press tortillas. 相似文献
7.
This research aims to investigate the relationship between the solvent retention capacity (SRC) test and quality assessment of hard red spring (HRS) wheat flour samples obtained from 10 HRS cultivars grown at six locations in North Dakota. The SRC values were significantly (P < 0.05) correlated with flour chemical components (protein, gluten, starch, and damaged starch contents, except arabinoxylan); with farinograph parameters (stability [FST], water absorption, peak time [FPT], and quality number); and with breadmaking parameters (baking water absorption [BWA], bread loaf volume [BLV], and symmetry). Differences in locations and cultivars contributed significantly to variation in quality parameters and SRC values. Suitability of SRC parameters for discriminatory analysis of HRS wheat flour is greatly influenced by molecular weight distribution (MWD) of SDS‐unextractable proteins. SRC parameters, except for sucrose SRC, showed significant (P < 0.01) and positive correlations with high‐molecular‐weight (HMW) polymeric proteins in SDS‐unextractable fractions, whereas only lactic acid SRC exhibited significant (P < 0.01) correlations with low‐molecular‐weight polymeric proteins. HMW polymeric proteins also exhibited positive associations with FPT, FST, BWA, and BLV. The discrepant variation in association of SRC parameters with respect to MWD of SDS‐unextractable proteins could improve segregation of HRS wheat flour samples for quality. 相似文献
8.
《Cereal Chemistry》2017,94(3):513-518
In this research, the relationship between dough rheology and water behavior was investigated in response to two osmotic regulators, salt (NaCl) and polyethylene glycol (PEG), using two Canadian Western Red Spring (CWRS) wheat varieties (Harvest and Pembina). The effects of NaCl (0.5, 1.0, and 1.5 g/100 g of flour) and PEG 400 (2.5, 5.0, and 7.5 g/100 g of flour) on dough rheology (oscillatory and creep) were estimated by using a central composite design. Variation of NaCl showed a significant effect on the phase angle δ, indicating that increasing the NaCl resulted in a more elastic dough. The opposite trend was observed with the addition of PEG. PEG 400 exerted a softening effect owing to plasticization, so that a more compliant liquid‐like dough was produced. The effects of water content (±10% of farinograph absorption) and PEG molar mass on dough rheology and freezable water content were estimated by using a full factorial design. PEGs with different molar mass (400, ≈1,600, and 3,350 g/mol) were added at a concentration of 1 g/100 g of flour. The water content significantly affected all dough rheological attributes, whereas PEG molar mass had no effect. The complex shear modulus (G* ) decreased with increasing water content, and dough creep compliance (J max) increased. The elastic response of dough, determined as the relative elastic part (J el) decreased with increasing water content. A high correlation was found between the freezable water content and dough rheological attributes. 相似文献
9.
Two wheat cultivars, soft white winter wheat Yang‐mai 11 and hard white winter wheat Zheng‐mai 9023, were fractionated by kernel thickness into five sections; the fractionated wheat grains in the 2.7–3.0 mm section were separated sequentially into three fractions according to kernel specific density. Physical properties of unfractionated, fractionated, and separated wheat grains and the physicochemical properties of processed wheat flour were determined. Test weight, relative density, and whiteness of flour in the middle kernel thicknesses were maximal and those properties decreased with increasing or decreasing kernel thickness; they also decreased with decreasing kernel specific density. Extensigraph properties showed the same results. Water absorption of flour and kernel hardness increased with increasing kernel thickness and decreasing kernel specific density. The farinograph properties also were related to kernel thickness and specific density. Pasting viscosity increased with increasing kernel thickness for sections from <2.5 mm to 3.0–3.2 mm, except that the >3.2 mm section was lowest; the kernels with the lightest specific density also were lowest. Thus, the quality of wheat grains with the greatest kernel thickness was not the best, and in fact may be the worst. The quality of wheat grains with small kernel thickness and light kernel specific density generally were worst. Most physicochemical properties of unfractionated and unseparated wheat grains were accurately predicted by the weighted‐average of the different kernel thickness sections and different kernel specific density fractions, except relative density, falling number, dough development time, and pasting temperature. 相似文献
10.
Measurements of creep‐recovery of flour‐water doughs were made using a dynamic mechanical analyzer (DMA) in a compression mode with an applied probe force of 50 mN. A series of wheat flour and blend samples with various breadmaking potentials were tested at a fixed water absorption of 54% and farinograph optimum water absorption, respectively. The flour‐water doughs exhibited a typical creep‐recovery behavior of a noncross‐linked viscoelastic material varying in some parameters with flour properties. The maximum recovery strain of doughs with a fixed water absorption of 54% was highly correlated (r = 0.939) to bread loaf volume. Wheat flours with a large bread volume exhibited greater dough recovery strain. However, there was no correlation (r = 0.122) between maximum creep strain and baking volume. The maximum recovery strain of flour‐water doughs also was correlated to some of the parameters provided by mixograph, farinograph, and TA‐XT2 extension. 相似文献
11.
We evaluated the effect and magnitude of flour particle size on sponge cake (SC) baking quality. Two different sets of wheat flours, including flours of reduced particle size obtained by regrinding and flour fractions of different particle size separated by sieving, were tested for batter properties and SC baking quality. The proportion of small particles (<55 μm) of flour was increased by 11.6–26.9% by regrinding. Despite the increased sodium carbonate solvent retention capacity, which was probably a result of the increased starch damage and particle size reduction, reground flour exhibited little change in density and viscosity of flour‐water batter and produced SC of improved volume by 0.8–15.0%. The volume of SC baked from flour fractions of small (<55 μm), intermediate (55–88 μm), and large (>88 μm) particles of soft and club wheat was in the range of 1,353–1,450, 1,040–1,195, and 955–1,130 mL, respectively. Even with comparable or higher protein content, flour fractions of intermediate particle size produced larger volume of SC than flour fractions of large particle size. The flour fractions of small particle size in soft white and club wheat exhibited lower flour‐water batter density (102.6–105.9 g/100 mL) than did those of large and intermediate particle fractions (105.2–108.2 g/100 mL). The viscosity of flour‐water batter was lowest in flour fractions of small particle size, higher in intermediate particles, and highest in large particles. Flour particle size exerted a considerable influence on batter density and viscosity and subsequently on SC volume and crumb structure. Fine particle size of flour overpowered the negative effects of elevated starch damage, water absorption, and protein content in SC baking. 相似文献
12.
Forty grain samples, derived from six soft red winter wheat lines with 1BL/1RS and four genotypes without the translocation, grown in four diverse environments, were used to assess test weight, flour yield, protein content of grain and flour, rheological properties, and end-use characteristics in cakes and cookies. Wheat lines with 1BL/1RS had similar or higher mean test weights than lines without the translocation. Mean flour yields were similar for the two groups. Test weight was not predictive of flour yield. Mean values for grain moisture, grain protein, and rheological properties, as measured by farinograph for mixing time stability and mixing tolerance index, were similar for wheat lines with and without 1BL/1RS. In several cases, flour from lines with 1BL/1RS produced dough with greater mixing tolerance and cakes with higher volume and softer texture than did check lines without the translocation. However, the translocation in these soft red winter wheat lines resulted in higher farinograph water absorption by the flour and decreased cookie spread. The results of this study were novel in that end-use, specifically baking quality of soft wheat lines with 1BL/1RS, varied dramatically depending on whether cookies or cakes were evaluated. Therefore, use of single-product baking tests may lead to false conclusions regarding end-use quality of 1BL/1RS soft wheat. Direct comparison between a pair of sister lines with and without 1BL/1RS indicated that the translocation had adverse effects on quality as exemplified by lower flour yield, greater farinograph water absorption, and reduced cookie diameter. However, the 1BL/1RS line had greater mixing tolerance and similar cake volume and texture scores in comparison to its sister line. In summary, 1BL/1RS lines were identified in which quality characteristics exceeded those of control cultivars and commercial flours. Genetic background and environmental factors probably affected milling and baking quality to a greater extent than the translocation. Many of the negative quality attributes previously associated with 1BL/1RS are probably due to genetic background effects and, therefore, could be greatly diminished with improvement of the genetic background in which the translocation resides. 相似文献
13.
T. Ueno S. G. Stevenson K. R. Preston M. J. Nightingale B. M. Marchylo 《Cereal Chemistry》2002,79(1):155-161
A simple, highly efficient and reproducible two‐step extraction procedure using dilute acetic acid without (AN) and then with sonication (AS) has been developed for the fractionation of wheat flour protein. Approximately 97% of total protein was extracted from a Canadian hard red spring wheat flour; an additional 1.2% protein could be recovered by further extraction with 1% DDT and 50% 1‐propanol (AR). Size‐exclusion HPLC (SE‐HPLC) and flow field‐flow fractionation (flow FFF) showed that the AN extract, which accounted for most of the total extractable protein (AN + AS + AR), consisted primarily of monomeric protein. The AS extract was composed primarily of polymeric proteins. Flow FFF showed that AN polymeric protein, including that eluting at the SE‐HPLC void volume, showed smaller Stokes diameters than AS polymeric protein. Flow FFF profiles of AS SE‐HPLC subfractions showed that the void volume subfraction contained monomeric and small polymeric protein in addition to large polymeric protein, indicating formation of larger complexes through interaction between some or all of the components. AN and AS extracts, as well as SE‐HPLC and flow FFF fractions thereof, showed a fairly wide range of values among 12 Canadian hard red and white spring wheat cultivars. The proportion of total protein in the AS extract and in the larger sized polymeric protein fractions from SE‐HPLC and flow FFF were highly positively correlated to farinograph mixing time. 相似文献
14.
This study investigated relationships between molecular weight distributions of unreduced grain proteins and grain, flour, and end‐use quality characteristics of soft white winter wheats grown in Oregon. Absorbance area and area percentage values of protein fractions separated by size‐exclusion HPLC (SE‐HPLC) showed significant correlations with quality characteristics, indicating associations of molecular weight distributions of proteins with quality characteristics. Specifically, high molecular weight polymeric protein fractions appeared to have a detrimental effect on soft wheat quality. This was shown by significant positive correlations with single kernel hardness index, and mixograph water absorption and tolerance, and negative correlations with break flour yield, cookie diameter, and cake volume. Higher proportions of soluble monomeric protein fraction eluted after the main gliadin peak, were associated with soft wheat quality due to negative associations with single kernel hardness index and mixograph water absorption and tolerance, and positive associations with break flour yield, cookie diameter, and cake volume. Calibration models were developed by the application of multivariate analyses to the SE‐HPLC data. These models explained >90% of the variation in mixograph water absorption and cookie diameter and thickness. 相似文献
15.
Wheat flour tortillas were made from flour streams of three wheat cultivars: Jagger hard red winter wheat, 4AT-9900 hard white winter wheat, and Ernie soft red winter wheat. Wheat samples were milled on a Miag experimental mill. Twelve flour streams and one straight-grade flour were obtained. Tortillas were made from each flour stream and the straightgrade flour by the hot-press method. Tortilla stretchability and foldability were evaluated by a texture analyzer and six panelists, respectively. Flour protein and water absorption affected tortilla texture. The foldability evaluated by panelists was positively correlated with flour protein content, farinograph water absorption, and damaged starch (P < 0.05). The 2BK and 3BK streams of hard wheat produced tortillas with strong stretchability and good foldability. Middling streams of hard wheat yielded tortillas with lighter color and less stretchability. Under the conditions tested in this study, soft wheat flours were not good for producing flour tortillas. 相似文献
16.
D. W. Hatcher J. E. Dexter G. G. Bellido J. M. Clarke M. J. Anderson 《Cereal Chemistry》2009,86(4):452-462
Canada Western Amber Durum wheat cultivars (4), Canada Western Red Spring (1), and Canada Western Hard White Spring (1) wheat were grown at three sites in 2007 to evaluate the effect of genotype (G) and environment (E) on the quality of yellow alkaline noodles (YAN). YAN were evaluated for color, appearance, and cooked texture. Brightness (L*) and yellowness (b*) of YAN made from durum cultivars were significantly higher than common wheat. Durum flour yellow pigment content was approximately fourfold greater than common wheat while noodle speckiness was approximately half of CWRS at 2 hr with environment accounting for >75% of the variance for each parameter. Resistance to compression (RTC) and recovery (REC) of cooked durum alkaline noodles were equivalent or superior to common wheat noodles even when lower grade durum wheat flour was used. In conclusion, cooked durum noodle texture parameters were all significantly influenced by genotype and environment, with environment accounting for 66–71% of their variance. 相似文献
17.
Starch granule composition and amylopectin structure affect starch digestibility, an important factor influencing wheat grain utilization for human food consumption. Six bread wheat cultivars with four belonging to the Canada Western Red Spring (CWRS) and two Canada Prairie Spring Red (CPSR) market classes were analyzed for the relationship between their grain constituents and in vitro enzymatic hydrolysis of starch. CPSR cultivars had higher starch and amylose concentrations compared with CWRS cultivars, which had a higher protein concentration. Starch granule size distribution did not differ among the genotypes, except AC Foremost, which had significantly (P < 0.05) higher volume percent of B‐type starch granules (≈15%) and lower volume percent of A‐type starch granules (≈9%) compared with other cultivars. Fluorophore‐assisted capillary electrophoresis revealed a lower content of R‐IV (DP 15–18, ≈6%) and a higher content of R‐VII (DP 37–45, ≈7%) chains in the CPSR cultivars compared with the CWRS cultivars. Starch in vitro enzymatic hydrolysis showed that compared with CWRS cultivars, the two CPSR cultivars had reduced amounts of readily digestible starch and higher amounts of slowly digestible starch and resistant starch. Consequently, the two CPSR cultivars also showed lower hydrolysis indexes in grain meal as well as extracted starch. CPSR cultivars, with higher starch and amylose concentrations, as well as a higher content of long chains of amylopectin, showed a reduced starch in vitro enzymatic hydrolysis rate. 相似文献
18.
Vamshidhar Puppala Timothy J. Herrman William W. Bockus Thomas M. Loughin 《Cereal Chemistry》1998,75(1):94-99
Twelve hard red winter wheat cultivars were grown at four locations in central Kansas to evaluate the role of foliar fungal diseases on wheat end-use quality in 1995. Disease was allowed to develop naturally on control plots and was controlled partially on plots treated with a systemic fungicide. After harvest, wheat samples were evaluated for the impact of the disease complex (leaf rust, tan spot, speckled leaf blotch) on physical grain quality, grain protein, milling properties, flour absorption, and peak mixing time. Data were analyzed using a mixed model to account for random (location and block) and fixed (cultivar and fungicide) effects. Location significantly influenced quality characteristics except kernel size and peak mixing time. The magnitudes of variation among random effects on all quality characteristics were larger for location than for the interactions between location × cultivar and location × fungicide. The fixed effects portion of the analysis revealed that the cultivar × fungicide treatment interaction significantly affected test weight, kernel protein, and flour absorption. Fungicide treatment resulted in significant increases in yield and kernel weight. Cultivar significantly affected all quality characteristics except kernel size and peak mixing time. Disease resistance exerted a significant influence on yield and test weight. The economic benefit associated with improved wheat quality from fungicide treatment was variety specific. Three cultivars (TAM 107, Karl 92, and Ike), which account for 50% of the 1997 planted wheat acres in Kansas, demonstrated positive improvements in test weight and protein in response to fungicide treatment. 相似文献
19.
《Cereal Chemistry》2017,94(4):723-732
Blending wheat or flour to meet end‐use requirements is a critical part of the production process to deliver consistent quality products. The functionality of commercial Canadian hard red wheat flour (HWF) and soft red wheat flour (SWF) blends with ratios of 100:0, 75:25, 50:50, 25:75, and 0:100 (HWF/SWF, w/w) was investigated with new and standard methods to discern which functional properties may be indicators of bread quality and processing performance. Rheological characteristics including farinograph water absorption behavior, dough development time (DT), stability, extensigraph extensibility, and gluten aggregation of wheat flours were significantly influenced by the proportion of HWF in blends of SWF and HWF (P < 0.05). The SWF content in the blends had negative linear relationships with the protein content, lactic acid solvent retention capacity, water absorption, and GlutoPeak peak torque. Polynomial relationships were observed for sodium dodecyl sulfate sedimentation volume, DT, stability, extensibility, resistance, GlutoPeak peak time, and bread loaf volume with the amount of SWF in blends. The results indicate that linear responses may be more closely tied to protein content, whereas polynomial responses may be more indicative of protein quality and baking performance. The GlutoPeak peak time was sensitive to the addition of HWF in the blends, showing a significant change in gluten aggregation kinetics between the 0 and 25% HWF samples. Principal component analysis (PCA) confirmed that GlutoPeak peak time was a significant factor in differentiating the 0% HWF. Protein secondary structures identified in the final baked bread were also PCA factors differentiating the 0% HWF sample. Although the 0% bread sample did not deviate from the observed polynomial trend for bread loaf volume, the differences in bread protein secondary structures may translate into differences in processing tolerance in commercial settings. 相似文献
20.
Gliadins are among the most important protein fractions affecting wheat baking quality, but they are also plant allergens and a cause of celiac disease or food intolerance. Therefore, we investigated how gliadin immunoreactivity and dough rheological properties are influenced by thioredoxin, a regulatory disulfide protein that can reduce disulfide bonds, a typical motive in many allergenic proteins. Ten winter wheat genotypes of different qualities were analyzed. Reduction by thioredoxin strongly (>50%) decreased gliadin immunoreactivity as estimated by enzyme‐linked immunosorbent assay with immunoglobulin E (IgE) sera from allergic patients and standard antigliadin antibodies but did not significantly affect dough rheological properties. Most parameters from the Brabender extensigraph were only slightly lower. Simultaneously, the farinograph curve exhibited a drawdown dislocation, possibly due to increased water absorption by modified flour, and dough consistency visibly improved. Results suggest that thioredoxin may be a universal natural beneficial modifier, able to significantly decrease gliadin immunoreactivity (hence its potential allergenicity) without decreasing the unique technological properties of wheat flour. 相似文献