共查询到20条相似文献,搜索用时 46 毫秒
1.
Starch and protein are the main polymeric ingredients of pasta and they determine the structural and textural properties of cooked pasta. The present investigation sought better understanding of the impact of high‐temperature (HT) drying on the starch and the protein fraction, and their role in structure and texture of pasta. Durum wheat spaghetti was prepared in a pilot‐plant installation. The drying conditions were selected for the HT phase at 80 or 100°C applied at high, intermediate, or low product moisture content. Spaghetti dried at 55°C served as a reference sample. The color of dry pasta was measured and the changes in the starch and protein fractions were determined by protein solubility, light microscopy, confocal scanning laser microscopy (CSLM), cooking tests, and texture measurements. HT drying at 100°C and low product moisture promoted browning of pasta. At the molecular level, HT drying promoted protein denaturation. At the microscopic level, HT drying contributed to a better preservation of the protein network and reduced swelling of starch and disintegration of granules. At the macroscopic level, HT drying enhanced the firmness of cooked pasta and reduced surface stickiness. In general, the changes were more pronounced by increasing the drying temperature from 80 to 100°C and by shifting the HT phase from an early to a late stage of the drying process. The drying conditions are determinant for the phase morphology of protein and starch in cooked pasta which, in turn, govern the textural properties of pasta. 相似文献
2.
Semolina from four durum wheat genotypes (cvs. Ben, Munich, Rugby, and Vic) were processed into spaghetti that was dried by low (LT), high (HT), and ultrahigh (UHT) temperature drying cycles. Starch was isolated from dried pasta and unprocessed wheat and semolina references. Pasta-drying cycles had no significant effect on the amylose content of starches. Significant increases in enzyme-resistant starch were observed in HT- and UHT-dried pasta (2.27 and 2.51%, respectively) compared with LT-dried pasta (1.68%). Differential scanning calorimetry (DSC) gelatinization characteristics of pasta starches showed a significantly narrow range (Tr), but no changes in onset and peak temperatures (To and Tp, respectively) and gelatinization enthalpy (ΔH1) were observed. When compared with unprocessed reference samples (wheat and semolina), all pasta starches shifted to higher gelatinization To and Tp, with narrow Tr and no changes in δH1. The second endothermic DSC peak indicated no increase in amylose-lipid complexation (δH2) due to drying cycle. Starches isolated from LT and HT pasta exhibited lower peak viscosities than those from UHT-dried pasta. Genotypes Ben and Rugby demonstrated higher pasting temperature and lower peak and breakdown viscosities than Vic and Munich. 相似文献
3.
Milled long‐grain rice samples were evaluated by differential scanning calorimetry (DSC) to determine the kinetics of starch gelatinization. The experiments were conducted with milled rice flour with a 10.6% degree of milling. DSC thermograms were obtained from 35 to 110°C using heating rates between 1°C/min and 15°C/min. The rate constants were evaluated, and two activation energies were found for different temperature ranges. At <70.1°C gelatinization was not completed. It was assumed that at <70.1°C gelatinization would only affect the amorphous regions. During the subsequent phase the crystalline regions destabilized by the amorphous component begin to gelatinize. For moisture content of 70%, wet basis, and a heating rate of 12°C/min, the enthalpy of gelatinization reaches a constant value of 7.3 J/g. 相似文献
4.
莲子热风干燥过程对其淀粉热特性及凝胶化的影响 总被引:1,自引:1,他引:0
为解决莲子干燥过程中淀粉形态结构变化造成莲子结壳、硬化,不利于干燥以及复水难、易返生问题,该文利用差示扫描量热技术(differential scanning calorimetry,DSC)对新鲜莲子以及不同热风干燥(70、80、90℃)莲子的淀粉热特性与凝胶化过程进行了研究.研究发现,莲子淀粉在低水分环境(42.2%,以质量比计)时存在2个明显的吸热峰,高水分环境(71.1%,以质量比计)时存在1个明显的吸热峰;莲子在干燥过程中不断失水,并伴随着淀粉凝胶化.方差分析(analysis of variance,ANOVA)表明,高温干燥显著影响莲子淀粉的热特性,其淀粉凝胶化温度(峰起温度To、峰顶温度Tp以及峰止温度Te)部分显著升高.相同干燥条件下,莲子淀粉糊化焓ΔH受水分显著影响,但干燥温度、升温速率对其影响不显著(P>0.01).采用Kissinger、Crane方程获得了淀粉凝胶化动力学参数(活化能Ea、指前因子Z以及反应级数n).莲子淀粉的非等温凝胶化反应可近似为一级反应,高温干燥后其Ea值出现增加,并随着水分增加呈现降低趋势.研究结果可为确定莲子高品质干燥工艺以及干莲子、莲子淀粉后续加工过程提供技术支持. 相似文献
5.
The gelatinization properties of starch extracted from corn and waxy corn dried at different temperatures were determined at various water contents and heating rates by differential scanning calorimetry. All gelatinization transition temperatures increased with drying temperature and heating rate. Onset and peak temperatures remained relatively constant, whereas end temperature decreased in the presence of excess water. The gelatinization enthalpy (deltaH(g)) of corn starch decreased with drying temperature at 50% water; however, it remained constant for waxy corn starch. The effects of water content and heating rate on deltaH(g) were dependent on each other. The minimum water levels required for gelatinization of starch extracted from corn dried at 20 and 100 degrees C are 21 and 29%, respectively. The activation energy (E(a)) was calculated using an Arrhenius-type equation and two first-order models; the degree of conversion (alpha) was predicted using a newly proposed model that produced good results for both E(a) and alpha. 相似文献
6.
Preservation of starch structure/properties, including structures formed during partial or complete cooking, are important when the impact of processing conditions is being studied. Two preservation techniques used to study changes in starch during thermal‐mechanical processing are commonly cited in the literature: 1) rapid freezing followed by lyophilization, and 2) a dehydration procedure using alcohols. A comparative determination on how these methods affect various starch structures has not been widely reported. Corn starch samples were collected from the Rapid Visco‐Analyser (RVA) at 3 min (swollen granules, 30°C), at the top of the pasting peak (gelatinized granules, 95°C), at the bottom of the trough (dispersed polymers, 95°C), and a completed RVA sample stored for 120 hr at 4°C (retrograded starch). Samples of masa were obtained by nixtamalizing corn. Differential scanning calorimetry (DSC) endotherms of starch and masa, and X‐ray diffraction (XRD) patterns of masa were evaluated after being preserved by alcohol‐ or freeze‐drying. No significant differences (P > 0.05) between methods were found for onset, end, and peak temperatures (°C), enthalpy (J/g) and % relative crystallinity in any of the samples analyzed. Liquid nitrogen freeze‐drying and ethanol dehydration are both effective methods of preserving various starch systems for structural changes detectible by DSC and XRD; freeze‐drying is generally less expensive and time‐consuming. 相似文献
7.
Retrogradation of du wx and su2 wx starches after different gelatinization heat treatments was studied by differential scanning calorimetry. Suspensions of 30% (w/w) starch were initially heated to final temperatures of 55–180°C. Gelatinized starch was cooled and stored at 4°C. Starch retrogradation in the storage period was influenced by initial heat treatments. Retrogradation of du wx starch was rapid: when initially heated to 80–105°C, retrogradation enthalpy was ≈10 J/g after one day at 4°C. The retrogradation enthalpy was ≈15 J/g after 22 days of storage, and reached a maximum of 16.2 J/g after 40 days of storage. For du wx starch, application of the Avrami equation to increases in retrogradation enthalpy suggests retrogradation kinetics vary with initial heating temperature. Furthermore, starch retrogradation may not fit simple Avrami theory for initial heating ≤140°C. Retrogradation of su2 wx starch was slow. After 30 days of storage at 4°C, the maximum retrogradation enthalpy for all initial heating temperatures tested was 7.0 J/g, for the initial heating to 80°C. This work indicates that gelatinization heat treatment in these starches is an important factor in amylopectin retrogradation, and that the effect of initial heat treatment varies according to the genotype. 相似文献
8.
Amylose contents of prime starches from nonwaxy and high-amylose barley, determined by colorimetric method, were 24.6 and 48.7%, respectively, whereas waxy starch contained only a trace (0.04%) of amylose. There was little difference in isoamylase-debranched amylopectin between nonwaxy and high-amylose barley, whereas amylopectin from waxy barley had a significantly higher percentage of fraction with degree of polymerization < 15 (45%). The X-ray diffraction pattern of waxy starch differed from nonwaxy and high-amylose starches. Waxy starch had sharper peaks at 0.58, 0.51, 0.49, and 0.38 nm than nonwaxy and high-amylose starches. The d-spacing at 0.44 nm, characterizing the amylose-lipids complex, was most evident for high-amylose starch and was not observed in waxy starch. Differential scanning calorimetry (DSC) thermograms of prime starch from nonwaxy and high-amylose barley exhibited two prominent transition peaks: the first was >60°C and corresponded to starch gelatinization; the second was >100°C and corresponded to the amylose-lipid complex. Starch from waxy barley had only one endothermic gelatinization peak of amylopectin with an enthalpy value of 16.0 J/g. The retrogradation of gelatinized starch of three types of barley stored at 4°C showed that amylopectin recrystallization rates of nonwaxy and high-amylose barley were comparable when recrystallization enthalpy was calculated based on the percentage of amylopectin. No amylopectin recrystallization peak was observed in waxy barley. Storage time had a strong influence on recrystallization of amylopectin. The enthalpy value for nonwaxy barley increased from 1.93 J/g after 24 hr of storage to 3.74 J/g after 120 hr. When gel was rescanned every 24 hr, a significant decrease in enthalpy was recorded. A highly statistically significant correlation (r = 0.991) between DSC values of retrograded starch of nonwaxy barley and gel hardness was obtained. The correlation between starch enthalpy value and gel hardness of starch concentrate indicates that gel texture is due mainly to its starch structure and functionality. The relationship between the properties of starch and starch concentrate may favor the application of barley starch concentrate without the necessity of using the wet fractionation process. 相似文献
9.
Drying process plays a fundamental role in pasta making. The greatest number of studies have been focused on the optimization of drying conditions for semolina pasta, and the obtained results have been applied in a similar way on pasta made up of nonconventional raw materials without considering a processing optimization. The aim of this research was to evaluate the influence of different drying treatments (low, medium, and high temperature) on the quality of uncooked and cooked soft wheat pasta enriched with oat flour. Results of total organic matter and dried residue showed no significant difference between samples dried by medium and high temperature treatments. Moreover, these last samples showed a slight improvement in cooking quality over samples dried at low temperature (total organic matter results were 1.31 versus 1.66 g/100 g of dried pasta). This study revealed that the improvement of cooking quality of pasta enriched with oat flour did not require the application of high drying temperature (>80°C) that involves a considerable consumption of energy and could favor the development of a Maillard reaction, decreasing quality characteristics of this kind of product. 相似文献
10.
Three spelt genotypes (Rouquin, Redoute, and HGQ Rouquin= Rouquin improved for gluten quality), each characterized by either high or low protein content, were processed to manufacture spaghetti, which was dried at both low (60°C) and high temperature (90°C) to assess the effects of flour properties and drying conditions on spelt pasta quality. Protein content in the spelt flour was considered low at ≈11.4% db and high at ≈13.5% db. Gluten properties, assessed by SDS sedimentation and gluten index values and by alveograph and farinograph parameters varied widely, ranging from poor for Redoute to very good for HGQ Rouquin. Pasta quality was assessed by determining color (L*, a*, and b* values), furosine, and cooking quality (stickiness, bulkiness, firmness, and total organic matter [TOM]). Furosine and color (a* and b* values) were significantly influenced by the intensity of the drying process. TOM and organoleptic judgement (OJ) showed that spelt pastas dried at low temperature, independent of their protein levels, were very poor (TOM ≥ 2.7 g/100 g of dry pasta, OJ ≤ 40), except for HGQ Rouquin which was characterized by good gluten strength. On the other hand, the cooking quality of spelt pastas dried at high temperature showed good values (TOM ≤ 1.8 g/100 g of dry pasta, OJ ≥ 53). The combination of high protein content (≥13.5% db) and high‐temperature drying resulted in the production of satisfactory cooking quality pastas from spelt wheats (TOM ≤ 1.2 g/100 g of dry pasta, OJ ≥ 67). 相似文献
11.
Kristof Brijs Jeroen A. Ingelbrecht Christophe M. Courtin Linda Schlichting Brian A. Marchylo Jan A. Delcour 《Cereal Chemistry》2004,81(3):361-368
The combined effects on pasta properties of 1) varying dosages of endoxylanases (EC 3.2.1.8) from Aspergillus aculeatus and Bacillus subtilis and 2) lower levels of water during pasta dough processing were studied. The A. aculeatus endoxylanase has high selectivity toward water‐extractable arabinoxylan (WE‐AX), whereas B. subtilis endoxylanase preferentially hydrolyzes water‐unextractable arabinoxylan (WU‐AX). Pasta was produced on a microscale (50.0 g) from the semolinas of both a strong (AC Navigator) and a moderately strong (AC Avonlea) durum wheat cultivar. The levels of added water in endoxylanase‐treated pastas were adjusted to obtain the same maximal farinograph consistencies as for the control pastas. The extruded pastas were dried with drying cycles at 40, 70, or 90°C. Apart from increasing levels of solubilized arabinoxylans, these treatments had little effect on the color, optimal cooking time, and firmness of the resulting pasta. High enzyme concentrations and low (40°C) drying temperature resulted in clearly or much less checked final products for the B. subtilis and A. aculeatus enzyme, respectively. Upon cooking, the enzymically formed low molecular weight arabinoxylans were retained better in the pasta strands than their equally low molecular weight arabinogalactan counterparts. 相似文献
12.
Nonwaxy rice starch was cross‐linked with sodium trimetaphosphate and sodium tripolyphosphate to obtain different degrees of cross‐linking (9.2, 26.2, and 29.2%). The objective was to investigate the influence of cross‐linking on thermal transitions of rice starch. Starch suspensions (67% moisture) were heated at 2°C/min using differential scanning calorimetry (DSC) to follow melting transition of amylopectin. Biphasic transitions were observed at ≈60–95°C in all samples. Melting endotherms of amylopectin shifted to a higher temperature (≤5°C) with an increasing degree of cross‐linking, while there was no dramatic change in enthalpy. Recrystallization during aging for 0–15 days was significantly suppressed by cross‐linking. The delayed gelatinization and retrogradation in crosslinked starch were evident due to restricted swelling and reduced hydration in starch granules. Glass transition temperature (Tg) measured from the derivative curve of heat flow was ‐3 to ‐4°C. No significant change in Tg was observed over the storage time studied. 相似文献
13.
Flours and starches from rough rice dried using different treatment combinations of air temperature (T) and relative humidity (RH) were studied to better understand the effect of drying regime on rice functionality. Rough rice from cultivars Bengal and Cypress were dried to a moisture content of ≈12% by three drying regimes: low temperature (T 20°C, RH 50%), medium temperature (T 40°C, RH 12%), and high temperature (T 60, RH 17%). Head rice grains were processed into flour and starch and evaluated for pasting characteristics with a Brabender Viscoamylograph, thermal properties with differential scanning calorimetry, starch molecular‐size distribution with high‐performance size‐exclusion chromatography (HPSEC), and amylopectin chain‐length distribution with high‐performance anion‐exchange chromatography with pulsed amperometric detection (HPAEC‐PAD). Lower head rice and starch yields were obtained from the batch dried at 60°C which were accompanied by an increase in total soluble solids and total carbohydrates in the pooled alkaline supernatant and wash water used in extracting the starch. Drying regime caused no apparent changes on starch molecular‐size distribution and amylopectin chain‐length distribution. Starch fine structure differences were due to cultivar. The pasting properties of flour were affected by the drying treatments while those of starch were not, suggesting that the grain components removed in the isolation of starch by alkaline‐steeping were important to the observed drying‐related changes in rice functionality. 相似文献
14.
Chao Ding Ragab Khir Zhongli Pan Jianyou Zhang Kang Tu Hamed El‐Mashad 《Cereal Chemistry》2015,92(5):441-448
The objective of this study was to investigate the effect of infrared (IR) drying followed by tempering and natural cooling on the change of physicochemical characteristics of white rice during up to 10 months of storage. The physicochemical characteristics of IR‐dried rice were also compared with those of conventionally dried rice. It took only 58 s to heat the rough rice from room temperature to 60°C with IR, and 2.17 percentage points of moisture was removed. After four months of storage, the increases in yellowness index, water uptake ratio, and volume expansion ratio of the rice dried with IR were 73.8, 63.9, and 55.3% those of rice dried with an ambient air drying method, respectively. IR drying slightly decreased the gelatinization temperature, enthalpy, and viscosities, reduced the changes in microstructure, and maintained cooking characteristics during storage. Therefore, the IR drying process is recommended to maintain the quality of white rice during storage. 相似文献
15.
Rice parboiled at various combinations of soaking temperature and steaming time were analyzed by differential scanning calorimetry (DSC) and X‐ray diffraction (XRD). Generally, gelatinization enthalpy decreased as the soaking temperature increased from 30°C to 50°C and 70°C to 90°C, and gelatinization enthalpy decreased as steaming times increased from 4 and 8 min to 12 min. As expected, a distinctive A‐pattern was observed in the XRD of raw rice. The most severely parboiled laboratory sample (90°C for 12 min), showed no discernable change toward the V‐pattern. Crystallinity decreased from the raw rice (24.6%) with increased cooking temperature. 相似文献
16.
The effects of extruding temperatures and subsequent drying conditions on X‐ray diffraction patterns (XRD) and differential scanning calorimetry (DSC) of long grain (LG) and short grain (SG) rice flours were investigated. The rice flours were extruded in a twin‐screw extruder at 70–120°C and 22% moisture, and either dried at room temperature, transferred to 4°C for 60 hr, or frozen and then dried at room temperature until the moisture was 10–11%. The dried materials were milled without the temperature increasing above 32°C. XRD studies were conducted on pellets made from extruded and milled flours with particle sizes of 149–248 μm; DSC studies were conducted from the same material. DSC studies showed that frozen materials retrograded more than the flours dried at room temperature. The LG and SG samples had two distinct XRD patterns. The LG gradually lost its A pattern at >100°C, while acquiring V patterns at higher temperatures. SG gradually lost its A pattern at 100°C but stayed amorphous at the higher extruding temperatures. DSC analysis showed that retrograded flours did not produce any new XRD 2θ peaks, although a difference in 2θ peak intensities between the LG and SG rice flours was observed. DSC analysis may be very sensitive in detecting changes due to drying conditions, but XRD data showed gradual changes due to processing conditions. The gradual changes in XRD pattern and DSC data suggest that physicochemical properties of the extruded rice flours can be related to functional properties. 相似文献
17.
The purpose of the present work was to examine whether partial acid hydrolysis (PAH) of a high‐amylose maize starch (ae‐VII) would enhance the effects of hydrothermal treatments to produce granular resistant starch (RS) that is stable to further heat treatment at atmospheric pressure. PAH ae‐VII starches were prepared by heating 35% (w/v) suspensions with 1% (w/w) HCl at 25°C for 6, 30, and 78 hr. Native and PAH starches were then treated by annealing (ANN) or heat‐moisture treatment (HMT). ANN was done at 70% moisture at 50, 60, or 70°C for 24 hr, and HMT was done at 30% moisture at 100, 120, or 140°C for 80 min. RS that survives boiling during analysis was determined by a modification of the AOAC method for determining total dietary fiber. RS was also determined by the Englyst method. Little change in the gelatinization enthalpy was found for ae‐VII starch after PAH, ANN, or HMT as individual treatments. After PAH, either ANN or HMT led to decreased gelatinization enthalpy. HMT and ANN alone increased boiling‐stable RS but decreased total RS. After PAH of ae‐VII, either ANN or HMT tended to increase the yield of boiling‐stable granular RS, with the greatest yield (≤63.2%) observed for HMT. 相似文献
18.
Studies of starch retrogradation have not considered the initial thermal treatment. In this article, we explore the effect of heating to temperatures within and above the gelatinization range on maize starch retrogradation. In the first experiment, 30% suspensions of waxy (wx) starch were initially heated to final temperatures ranging from 54 to 72°C and held for 20 min. On reheating in the differential scanning calorimeter immediately after cooling, the residual gelatinization endotherm peak temperature increased, the endotherm narrowed, and enthalpy decreased. Samples stored for seven days at 4°C showed additional amylopectin retrogradation endotherms. Retrogradation increased dramatically as initial holding temperature increased from 60 to 72°C. In a second experiment, wx starch was initially heated to final temperatures from 54 to 180°C and rapidly cooled, followed by immediate reheating or storage at 4°C. Maximum amylopectin retrogradation enthalpy after storage was observed for initial heating to 82°C. Above 82°C, retrogradation enthalpy decreased as initial heating temperature increased. A similar effect for ae wx starch was observed, except that retrogradation occurred more rapidly than for wx starch. These experiments show that heating to various temperatures above the range of gelatinization may profoundly affect amylopectin retrogradation, perhaps due to varying extents of residual molecular order in starch materials that are commonly presumed to be fully gelatinized. This article shows that studies of starch retrogradation should take into account the thermal history of the samples even for temperatures above the gelatinization temperature range. 相似文献
19.
Differential scanning calorimetry (DSC) was used to study the effect of sucrose on wheat starch glass transition, gelatinization, and retrogradation. As the ratio of sucrose to starch increased from 0.25:1 to 1:1, the glass transition temperature (Tg, Tg′) and ice melting enthalpy (ΔHice) of wheat starch‐sucrose mixtures (with total moistures of 40–60%) were decreased to a range of −7 to −20°C and increased to a range of 29.4 to 413.4 J/g of starch, respectively, in comparison with wheat starch with no sucrose. The Tg′ of the wheat starch‐sucrose mixtures was sensitive to the amount of added sucrose, and detection was possible only under conditions of excess total moisture of >40%. The peak temperature (Tm) and enthalpy value (ΔHG) for gelatinization of starch‐sucrose systems within the total moisture range of 40–60% were increased with increasing sucrose and were greater at lower total moisture levels. The Tg′ of the starch‐sucrose system increased during storage. In particular, the significant shift in Tg′ ranged between 15 and 18°C for a 1:1 starch‐sucrose system (total moisture 50%) after one week of storage at various temperatures (4, 32, and 40°C). At 40% total moisture, samples with sucrose stored at 4, 32, and 40°C for four weeks had higher retrogradation enthalpy (ΔH) values than a sample with no sucrose. At 50 and 60% total moisture, there were small increases in ΔH values at storage temperature of 4°C, whereas recrystallization of samples with sucrose stored at 32 and 40°C decreased. The peak temperature (Tp), peak width (δT), and enthalpy (ΔH) for the retrogradation endotherm of wheat starch‐sucrose systems (1:0.25, 1:0.5, and 1:1) at the same total moisture and storage temperature showed notable differences with the ratio of added sucrose. In addition, Tp increased at the higher storage temperature, while δT increased at the lower storage temperature. This suggests that the recrystallization of the wheat starch‐sucrose system at various storage temperatures can be interpreted in terms of δT and Tp. 相似文献
20.
Processing conditions similar to traditional nixtamalization are now used by the industry in the production of dry maize flours (DMF). The objective of this investigation was to evaluate the effect of industrial nixtamalization on maize starch. Thus, dent maize grains were sampled from storage silos and the starch isolated (S). From the same batch of maize, DMF was obtained and the starch isolated (S‐DMF). The amylose content in the starches was quite similar (21.5–23.4%) and characteristic of a dent maize. However, nixtamalization increased the calcium content in S‐DMF. The starches investigated exhibited the typical A‐type diffraction pattern after 40 days of storage at 11–84.1% rh. However, the differential scanning calorimetry (DSC) results showed that annealing of maize starch occurred during storage at 30°C. On the other hand, industrial nixtamalization has both a melting and annealing effect on maize starch. Thus, the operative glass transition temperature (Tg), and the DSC parameters that define starch gelatinization (Tp and ΔH) showed that the proportion between crystalline and amorphous regions within the starch granule and the extent of physical damage to starch were modified by nixtamalization. As an example, Tg for S was between 60 and 62.5°C, while the S‐DMF had a Tg of 45–55°C for damaged starch and 65–70°C for annealed starch. Additionally, the extraction of the nonconstitutive starch lipids provided starches with more consistent thermal properties, particularly in the behavior of gelatinization at different water content. This last observation might have important implications in the consistency of starch physicochemical properties and, consequently, in the quality of maize products such as tortillas. 相似文献