Effects of β‐Glucan Content and Pearling of Barley in Diet‐Induced Obese Mice

The effects of the β‐glucan content and pearling of barley on abdominal obesity and the proinflammatory state were investigated in diet‐induced obese mice. Male C57BL/6J mice were randomly divided into four groups and fed either a high‐fat diet containing high‐β‐glucan barley (Beau Fiber [BF]) or a high‐fat diet containing β‐glucan‐free barley (Shikoku‐hadaka 84(bgl ) [BGL]) as whole grain flour or 60% pearled flour for 12 weeks. The weights of mesenteric fat, serum total and low density lipoprotein cholesterol levels, serum insulin and fasting glucose levels, oral glucose tolerance test results, and messenger RNA (mRNA) expression of proinflammatory markers in epididymal fat in both BF groups were significantly lower than those of both BGL groups. The abundance of Bacteroides in both BF groups was significantly higher than that in both BGL groups, whereas the abundance of Clostridium clusters in both BF groups was significantly lower than that in both BGL groups. No significant differences between the whole grain and pearled flours were observed. These results suggest that high‐β‐glucan barley attenuates the progression of abdominal obesity and the proinflammatory state in diet‐induced obese mice compared with β‐glucan‐free barley, possibly by modifying insulin secretion and the microbiota.     

Extraction of β‐Glucan from Oats for Soluble Dietary Fiber Quality Analysis

Extraction protocols for β‐glucan from oat flour were tested to determine optimal conditions for β‐glucan quality testing, which included extractability and molecular weight. We found mass yields of β‐glucan were constant at all temperatures, pH values, and flour‐to‐water ratios, as long as sufficient time and enough repeat extractions were performed and no hydrolytic enzymes were present. Extracts contained about 30–60% β‐glucan, with lower proportions associated with higher extraction temperatures in which more starch and protein were extracted. All commercial starch hydrolytic enzymes tested, even those that are considered homogenous, degraded β‐glucan apparent molecular weight as evaluated by size‐exclusion chromatography. Higher concentration β‐glucan solutions could be prepared by controlling the flour‐to‐water ratio in extractions. Eight grams of flour per 50 mL of water generated the highest native β‐glucan concentrations. Routine extractions contained 2 g of enzyme‐inactivated flour in 50 mL of water with 5mM sodium azide (as an antimicrobial), which were stirred overnight, centrifuged, and the supernatant boiled for 10 min. The polymer extracted had a molecular weight of about 2 million and was stable at room temperature for at least a month.     

Effect of Extrusion Cooking on the Primary Structure and Water Solubility of β‐Glucans from Regular and Waxy Barley

Water‐soluble β‐glucan from native and extrusion‐cooked barley flours of two barley cultivars, Candle (a waxy starch barley) and Phoenix (a regular starch barley), was isolated and purified. The purity of β‐glucan samples was 85–93% (w/w, dry weight basis) for Candle and 77–86% (w/w, dry weight basis) for Phoenix. The water solubility of β‐glucan (at room temperature, 25°C) in the native and extruded flours (primary solubility) was different from that of the purified β‐glucan samples (secondary solubility). The solubility of β‐glucan in the native and extruded Candle flour was substantially higher than that of β‐glucan in Phoenix. For both cultivars, β‐glucan in the extruded flours had solubility (primary solubility) values higher than in their native counterparts. The solubility of β‐glucan in the purified β‐glucan samples differed depending on the barley cultivar and the extrusion conditions employed. The glycosidic linkage profiles of purified soluble β‐glucan from native and extruded barley flours were determined in order to understand the changes in the primary structure of β‐glucan and the effect of extrusion on the β‐glucan structure‐solubility relationship.     

Starch and By‐Products from a Laboratory‐Scale Barley Starch Isolation Procedure

Starch was isolated from three different barleys with normal, highamylose, or high‐amylopectin (waxy) starch. The laboratory‐scale starch isolation procedure included crushing of grains, steeping, wet milling, and sequential filtration and washing with water and alkali, respectively. Yield and content of starch, protein, and dietary fiber, including β‐glucan, were analyzed in isolated starch and in the by‐products obtained. Starch yield was 25–34%, and this fraction contained 96% starch, 0.2–0.3% protein, and 0.1% ash. Most of the remaining starch was found in the coarse material removed by filtration after wet milling, especially for the high‐amylose barley, and in the starch tailings. Microscopy studies showed that isolated starch contained mostly A‐granules and the starch tailings contained mostly B‐granules. Protein concentration was highest in the alkali‐soluble fraction (54%), whereas dietary fiber concentration was highest in the material removed by filtration after alkali treatment for the normal and waxy barleys (55%). The β‐glucan content was especially high for the waxy barley in this fraction (26%). The study thus showed that it was possible to enrich chemical constituents in the by‐products but that there were large differences between barleys. This result indicates a need for modifications in the isolation procedures for different barleys to obtain high yields of starch and different by‐products. Valuable by‐products enriched in β‐glucan or protein, for example, may render starch production more profitable.     

Development of an Orange‐Flavored Barley β‐Glucan Beverage

Barley β‐glucan concentrate shows great potential as a functional food ingredient, but few product applications exist. The objectives of this study were to formulate a functional beverage utilizing barley β‐glucan concentrate, and to make a sensory evaluation of beverage quality in comparison to pectin beverages and to assess shelf stability over 12 weeks. Three beverage treatments containing 0.3, 0.5, and 0.7% (w/w) barley β‐glucan were developed in triplicate. Trained panelists found peely‐ and fruity‐orange aroma and sweetness intensity to be similar (P > 0.05) for all beverages tested. Beverage sourness intensity differed among beverages (P ≤ 0.05). Panelists evaluated beverages containing 0.3% hydrocolloid as similar (P > 0.05), whereas beverages with 0.5 and 0.7% β‐glucan were more viscous (P ≤ 0.05) than those with pectin at these levels. Acceptability of beverages was similar according to the consumer panel. Shelf stability studies showed no microbial growth and stable pH for all beverages over 12 weeks. Colorimeter values for most beverages decreased (P ≤ 0.05) during the first week of storage, mostly stabilizing thereafter. With an increase in concentration, β‐glucan beverages became lighter in color (P ≤ 0.05) and cloudier, but these attributes for pectin beverages were not affected (P > 0.05). β‐Glucan beverages exhibited cloud loss during the first three weeks of storage. β‐Glucan can therefore be successfully utilized in the production of a functional beverage acceptable to consumers.     

Mixed Linkage (1→3),(1→4)‐β‐d‐Glucans of Grasses

The mixed‐linkage (1→3),(1→4)‐β‐d ‐glucans are unique to the Poales, the taxonomic order that includes the cereal grasses. (1→3), (1→4)‐β‐Glucans are the principal molecules associated with cellulose microfibrils during cell growth, and they are enzymatically hydrolyzed to a large extent once growth has ceased. They appear again during the developmental of the endosperm cell wall and maternal tissues surrounding them. The roles of (1→3),(1→4)‐β‐glucans in cell wall architecture and in cell growth are beginning to be understood. From biochemical experiments with active synthases in isolated Golgi membranes, the biochemical features and topology of synthesis are found to more closely parallel those of cellulose than those of all other noncellulosic β‐linked polysaccharides. The genes that encode part of the (1→3),(1→4)‐β‐glucan synthases are likely to be among those of the CESA/CSL gene superfamily, but a distinct glycosyl transferase also appears to be integral in the synthetic machinery. Several genes involved in the hydrolysis of (1→3),(1→4)‐β‐glucan have been cloned and sequenced, and the pattern of expression is starting to unveil their function in mobilization of β‐glucan reserve material and in cell growth.     

Distribution of β‐Glucan in the Grain of Hull‐less Barley

Nine hull‐less barley (HB) containing waxy (0–7% amylose), normal (≈25% amylose), or high amylose (≈42% amylose) starch with normal or fractured granule make‐up and 4–9% (1→3)(1→4)‐β‐d ‐glucans (β‐glucan) were pearled to remove 70% of the original grain weight in 10% intervals. The pearled fractions were analyzed for β‐glucan distribution within HB grain. Protein content of the pearled fractions indicated that the three outermost fractions contained pericarp and testa, aleurone, and subaleurone tissues, respectively. For all HB, β‐glucan and acid‐extract viscosity were very low in the outermost 20% of the kernel. For low β‐glucan HB, β‐glucan content was the greatest in the subaleurone region and declined slightly toward inner layers. For high β‐glucan HB, however, more than 80% of grain β‐glucan was distributed more evenly throughout the endosperm. Acid extract viscosity was significantly (P < 0.01) correlated with total (r = 0.75) and soluble (r = 0.87) β‐glucan content throughout the kernel of all HB. Growing conditions, location and year, had significant effects on the concentration of protein, starch and β‐glucan. However, protein, starch, and β‐glucan distribution patterns were not affected by growing conditions. The difference in β‐glucan distribution between low and high β‐glucan HB may explain the difference in milling performance of HB with low or high β‐glucan.     

Preparation and Characterization of Films Using Barley and Oat β‐Glucan Extracts

Films for potential food use were prepared from aqueous solutions of β‐glucan extracted from hulled barley, hull‐less barley, and oats. The extracts (75.2–79.3% β‐glucan) also contained proteins, fat, and ash. Glycerol was used as a plasticizer. The films were translucent, smooth, and homogeneous in structure on both sides. Water vapor permeability of films prepared from 4% solutions of β‐glucan extracts were higher than those from 2% solutions, despite similar values for water vapor transmission rate. Mechanical properties were influenced by both β‐glucan source and concentration. The oat β‐glucan films showed higher tensile strength and water solubility, and lower color, opacity, and deformation values than those of barley. Films prepared from hull‐less barley cv. HLB233 remained intact upon immersion in water for 24 hr.     

High‐Starch and High‐β‐Glucan Barley Fractions Milled with Experimental Mills

This study focused on the performance of two hulless barley cultivars (Doyce and Merlin) and one commercial husked (hulled) sample using experimental milling. The purpose was to use experimental milling as a preliminary indicator of the milled streams with potential use for fuel ethanol production and fractions that could be used in food products. Experimental mills designed for flour production evaluation from wheat were Chopin CD1 Auto, Quadrumat Sr, Buhler, and an experimental Ross roller mill walking flow. Results indicate that the shorts had the highest levels of β‐glucan from all the mills. However, the β‐glucan content in the break flours was highest with the roller mill walking flow and the Chopin CD1 for the hulless cultivars. The lowest β‐glucan content in the break flour was found with the Buhler for Doyce. Break flour and, to a slightly lesser extent, reduction flour from all cultivars tested on all mills contained the highest starch content (up to 83%) and are therefore most appropriate for use as feedstock for fuel ethanol production. Conversely, bran and shorts from all cultivars and mills were lowest in starch (as low as 25%), making them ideal as low‐starch food ingredients.     

Viscosity and Solubility of β‐Glucan Extracted Under In Vitro Conditions from Barley β‐Glucan‐Fortified Bread and Evaluation of Loaf Characteristics

Fortifying bread with β‐glucan has been shown to reduce bread quality and the associated health benefits of barley β‐glucan. Fortification of bread using β‐glucan concentrates that are less soluble during bread preparation steps has not been investigated. The effects of β‐glucan concentration and gluten addition on the physicochemical properties of bread and β‐glucan solubility and viscosity were investigated using a less soluble β‐glucan concentrate, as were the effects of baking temperature and prior β‐glucan solubilization. Fortification of bread with β‐glucan decreased loaf volume and height (P ≤ 0.05) and increased firmness (P ≤ 0.05). Gluten addition to bread at the highest β‐glucan level increased height and volume (P ≤ 0.05) to values exceeding those for the control and decreased firmness (P ≤ 0.05). β‐Glucan addition increased (P ≤ 0.05) extract viscosity, as did gluten addition to the bread with the highest β‐glucan level. Baking at low temperature decreased (P ≤ 0.05) β‐glucan viscosity and solubility, as did solubilizing it prior to dough formulation. Utilization of β‐glucan that is less soluble during bread preparation may hold the key to effectively fortifying bread with β‐glucan without compromising its health benefits, although more research is required.     

β-Glucanase Activity and Molecular Weight of β-Glucans in Barley After Various Treatments

β-Glucanase activity interferes with molecular characterization of mixed-linkage (1→3)(1→4)-β-d -glucans (β-glucans). Reductions in β-glucanase activity were determined after barley cvs. Azhul, Waxbar, and Baronesse were treated with autoclaving (120°C, 45 min), calcium chloride (0.05M, 1 hr), 70% ethanol (80°C, 4 hr), hydrochloric acid (0.1N, 1 hr), oven heating (120 and 140°C, 40 min), sodium hydroxide (0.0025M, 1 hr), and 5% trichloroacetic acid (TCA) (40°C, 1 hr). High-performance size-exclusion chromatography (HPSEC) of α-amylase-treated aqueous extracts was used to demonstrate the effects of treatments on the molecular weights of β-glucans. The HPSEC system included multiple-angle, laser light scattering, refractive index, and fluorescence detectors. β-Glucanase activities, ranging from 52 to 65 U/kg of barley, were reduced by autoclaving (50–75%), hot alcohol (67–76%), oven heating (40–96%), CaCl₂ (75–95%), NaOH (76–89%), and TCA (92–96%). Some malt β-glucanase activity remained after most treatments. HCl and TCA treatments reduced extraction and molecular weights of β-glucans. Weight-average molecular weights (M_w) for β-glucans extracted with water at 23°C were low (most <8 × 10⁵). Base treatment (pH 9) and extraction at 100°C for 2.5 hr resulted in the greatest extraction of β-glucans and highest M_w. As a result, the conditions seem appropriate for measurement of physical characteristics of β-glucans in cereal products.     

Effects of Pearling,Grinding Conditions,and Roller Mill Flow on the Yield and Composition of Milled Products from Hull‐less Barley

Two hull‐less barley cultivars, one with waxy starch and the other with high‐amylose starch, were roller‐milled unpearled and after 15% pearling. Flows of varying length, with diverse roll settings and roll surfaces were used to determine effects on the yield, composition, and properties of milled products. Similar trends were noted for the two cultivars. When using a short flow comprising four break passages and a sizing passage, power consumption during grinding was reduced by 10% when roll flute orientation was changed from dull‐to‐dull (D/D) to sharp‐to‐sharp (S/S). Flute orientation had minimal effects on the yield and brightness of flour, but SS grinding gave a higher yield of a fiber‐rich fraction (FRF). FRF yield and composition are of particular interest because FRF has potential as a functional food ingredient due to elevated levels of β‐glucans (BG) and arabinoxylans (AX). When using smooth frosted rolls (SM) for the sizing passage, power consumption increased by several times over using fluted sizing rolls with little advantage for either yield or BG content of FRF. FRF starch damage increased when smooth sizing rolls were used, and water swelling, a measure of water hydration capacity, also increased. Setting break and sizing rolls sharp‐to‐sharp significantly lowered the mean particle size of the FRF fraction, accompanied by moderate declines in FRF BG and AX contents. FRF yield decreased ≤50% when milling flow was lengthened to three sizing passages with intermediate impact passages, with only a moderate accompanying increase in FRF fiber content, regardless of roll conditions. Pearling 15% before milling reduced the yield of FRF by ≈30% while moderately reducing flour yield. Flour brightness was improved by pearling. When barley was pearled, FRF contained higher amounts of BG, but lower amounts of AX, phenolics, ash, and protein.     

Factors Influencing β‐Glucan Levels and Molecular Weight in Cereal‐Based Products

The beneficial role of soluble dietary fiber in human nutrition is well documented and has lead to a growing demand for the incorporation of β‐glucan, particularly from oats and barley, into foods. β‐Glucan with high solubility and high molecular weight distribution results in increased viscosity in the human intestine, which is desirable for increased physiological activity. Molecular weight, level, and solubility of β‐glucan are affected by genotype, environment, agronomic input, and the interactions of these factors and food processing methods. Available literature reveals that the level of β‐glucan in a finished product (e.g. bread, cake, muffins) depends upon several factors in the production chain, whereas food processing operations are major factors affecting molecular weight and solubility of β‐glucans. Therefore, to avail themselves of the natural bioactive compounds, food manufacturers must pay attention not only to ensure sufficient concentration of β‐glucan in the raw material but also to the processing methods and functional properties of β‐glucan, minimizing enzymatic or mechanical breakdown of the β‐glucans in end‐product and optimizing processing conditions. This review discusses the different sources of β‐glucan for use in human functional foods and factors affecting the levels and the molecular weight of β‐glucan at various pre‐ and postharvest operations.     

Release of β‐Glucan from Cell Walls of Starchy Endosperm of Barley

β‐Glucan can be solubilized from barley by warm water, with increasing solubilization as the temperature is increased. Substantially less glucan is extracted if the barley is dehusked using sulfuric acid, particularly if the dehusked barley is denatured. This indicates that enzymes capable of solubilizing glucan are present in barley. Various purified enzymes promote the solubilization of glucan from denatured and dehusked barley. Apart from endo‐β‐(1→3)(1→4)‐glucanase, these enzymes include endo‐xylanases, arabinofuranosidase, xyloacetylesterase, and feruloyl esterase. Ferulic acid and, probably, acetyl groups are esterlinked to arabinoxylan, not β‐glucan, in the cell walls of barley starchy endosperm, so the ability of the esterases, xylanases, and arabinofuranosidase to solubilize glucan indicates the pentosan component of the cell wall can restrict the extraction of glucan.     

Structure of (1→3)(1→4)‐β‐d‐Glucan in Waxy and Nonwaxy Barley

The endosperm cell walls of barley are composed largely of a (1→3)(1→4)‐β‐d ‐glucan commonly known simply as β‐d ‐glucan (Wood 2001). There has been much research into the characteristics of barley β‐glucan because of the influence of this polysaccharide on performance of barley in malting and subsequent brewing of beer, and in feed value, especially for young chicks (MacGregor and Fincher 1993). The potential for β‐glucan to develop high viscosity is a problem in these uses, but from the perspective of human nutrition, this characteristic may be an advantage. The glycemic response to oat β‐glucan is inversely related to (log)viscosity (Wood et al 1994a) and there is evidence to suggest that the lowering of serum cholesterol levels associated with oat and barley products (Lupton et al 1994; Wood and Beer 1998) is at least in part due to the β‐glucan (Braaten et al 1994) and probably also its capacity to develop viscosity in the gastrointestinal tract (Haskell et al 1992).     

Chemical Constituents,Dietary Fiber,and γ‐Oryzanol in Six Commercial Varieties of Brown Rice from Taiwan

In the interest of promoting the consumption of whole grains, the chemical constituents (moisture, protein, ash, and fat) and biofunctional components (dietary fiber and γ‐oryzanol) were determined in six varieties of brown rice (five japonica and one indica) that are preferred in the form of polished rice by consumers in Taiwan. The results showed significant differences (P < 0.05) in the chemical compositions of the samples for all the measured parameters. The Koshihikari variety had the highest contents of protein and crude ash. Crop year showed significant effects on the moisture content and partly on the protein, ash, and fat contents. The total dietary fiber content of the tested rice ranged between 5.1 and 10.0%, with Kaohsiung 145 having the highest content (P < 0.05). In all varieties, the content of insoluble dietary fiber was greater than that of soluble dietary fiber. The content (mg/100 g) of γ‐oryzanol ranged from 17.9 to 29.2 for the 2009 crop and from 24.5 to 41.3 for the 2010 crop. It showed that γ‐oryzanol was affected by crop year and variety. The japonica types had significantly higher γ‐oryzanol content (P < 0.05) than the indica type. Taikeng 9 and Tainan 11 had greater γ‐oryzanol content than the other rice varieties.     

Effects of Pearling on Falling Number and α‐Amylase Activity of Preharvest Sprouted Spring Wheat

Preharvest sprouted wheat is often characterized by the falling number (FN) test. FN decreases in preharvest sprouted wheat as enzymatic degradation of the starchy endosperm increases. Wheat with FN values <250–275 is often discounted at the time of sale. The intent of this investigation was to evaluate the effects of debranning or pearling on the flour quality traits of five samples of wheat rated as low, med‐low, medium, med‐high, and sound that exhibited a range in FN values of 62–425 sec. Replicates of each sample were pearled for 30, 60, and 120 sec to remove portions of the outer bran layers before milling. FN was highly correlated with α‐amylase activity (r > ‐0.97) in the med‐low, medium, and med‐high FN sample sets as pearling time increased. FN increased in the medlow, medium, and med‐high FN samples by 128, 123, and 80%, respectively, after 120 sec of pearling. Pearling had no effect on flour FN of the low FN sample but α‐amylase activity was significantly decreased. Pearling had little or no effect on FN and α‐amylase activity of the sound sample. FN was moderately to strongly correlated with Rapid Visco Analyser (RVA), alveograph, and farinograph properties, and poorly correlated with protein content, flour yield, and bread loaf volume. In subsequent breadmaking studies, bread loaf volume, and crumb characteristics of flour from pearled wheat were not significantly different from loaf volume and crumb characteristics of flour from the corresponding nonpearled wheat.     

Comparisons of β-Glucan Content of Barley and Oat

The cholesterol-lowering effect of cereal grains has been associated with the soluble fiber component of dietary fiber. β-Glucan is the major soluble fiber component of barley (Hordeum vulgare L.) and oat (Avena sativa L.). Much research has been conducted to determine the β-glucan content of barley and oat genotypes from many different countries. However, genotypes of both crops always were grown in separate experiments, making direct comparisons between the two crops difficult. This study compares in the same experiment the β-glucan content of nine barley and 10 oat genotypes grown at two locations in each of two years (i.e., four environments) in North Dakota. Averaged across genotypes, total β-glucan content of barley and oat groat was similar. Soluble β-glucan content of oat groat was greater than barley, and oat groat had a greater ratio of soluble-to-total β-glucan than barley. The soluble β-glucan content and ratio of soluble to total β-glucan content of the “best” barley genotypes were less than that of oat genotypes with the highest levels of these two traits.