Mapping of a gene for leaf scald resistance in barley line 'B87/14' and validation of microsatellite and RFLP markers for marker-assisted selection

Seedlings of the barley line ‘B87/14’ were resistant to 22 out of 23 Australian isolates of Rhynchosporium secalis, the causal agent of leaf scald.‘B87/14’‐based populations were developed to determine the location of the resistance locus. Scald resistance segregated as a single dominant trait in BC₁F₂ and BC₁F₃ populations. Bulked segregant analysis identified amplified fragment length polymorphisms (AFLPs) with close linkage to the resistance locus. Fully mapped populations not segregating for scald resistance located these AFLP markers on chromosome 3H, possibly within the complex Rrs1 scald locus. Microsatellite and restriction fragment length polymorphism markers adjacent to the AFLP markers were identified and validated for their linkage to scald resistance in a second segregating population, with the closest marker 2.2 cM from the resistance locus. These markers can be used for selection of the Rrs.B87 scald‐resistance locus, and other genes at the chromosome 3H Rrs1 locus.     

Quantitative trait loci for leafhopper (Empoasca fabae and Empoasca kraemeri) resistance and seed weight in the common bean

A population of 108 common bean recombinant inbred lines (RILs) (F_5:6‐9), derived from a leafhopper (Empoasca fabae and E. kraemeri)‐susceptible cultivar (‘Berna’) and a leafhopper‐resistant line (EMP 419) was used to identify molecular markers genetically linked to leafhopper resistance and seed weight. Bulked segregant analysis and quantitative trait analysis identified eight markers that were associated with resistance to E. fabae, and four markers that were associated with E. kraemeri resistance. Three markers were associated with resistance to both species. A partial linkage map of the bean genome was constructed. Composite interval mapping identified quantitative trait loci (QTL) for resistance to both leaf hopper species on core‐map linkage groups B1, B3 and B7. QTL for seed weight were found close to the locus controlling testa colour and an α‐phaseolin gene.     

Mapping of Re,a gene conferring the red leaf trait in ornamental kale (Brassica oleracea L. var. acephala)

Variegated leaf colour is an important agronomic trait that affects the market value of ornamental kale (Brassica oleracea L. var. acephala). The red leaf phenotype in kale is due to anthocyanin accumulation. To investigate the pattern of inheritance of this trait, we constructed an F₂ population by crossing ‘Y005‐15’, a double haploid with red leaves, with a white‐leaved double haploid, ‘Y011‐13‐38’, followed by self‐pollination. An F₂ population consisting of 4284 individuals was used to study the inheritance of this trait, which showed that the character was controlled by a dominate gene. All of the 1050 white leaf trait plants in the F₂ were used for mapping and developing markers linked to Re gene. Results showed that Re was mapped to a locus on linkage group C09 of Brassica oleracea, and the locus was mapped between six SSR markers (C9Z1, C9Z16‐1, C9Z90, C9Z94, C9Z96 and C9Z99), with a genetic distance of 6.7, 1.0, 0.3, 2.0, 2.1 and 0.4 cM from Re gene, respectively. These results may facilitate marker‐assisted selection of the red leaf trait in kale breeding as well as map‐based cloning of the red leaf trait gene.     

A novel aphid resistance locus in cowpea identified by combining SSR and SNP markers

The utility of combining simple sequence repeat (SSR) and single nucleotide polymorphism (SNP) marker genotyping was determined for genetically mapping a novel aphid (Aphis craccivora) resistance locus in cowpea breeding line SARC 1‐57‐2 and for introgressing the resistance into elite cultivars by marker‐assisted backcrossing (MABC). The locus was tagged with codominant SSR marker CP 171F/172R with a recombination fraction of 5.91% in an F₂ population from ‘Apagbaala’ x SARC 1‐57‐2. A SNP‐genotyped biparental recombinant inbred line population was genotyped for CP 171F/172R, which was mapped to position 11.5 cM on linkage group (LG) 10 (physical position 30.514 Mb on chromosome Vu10). Using CP 171F/172R for foreground selection and a KASP‐SNP‐based marker panel for background selection in MABC, the resistance from SARC 1‐57‐2 was introduced into elite susceptible cultivar ‘Zaayura’. Five BC₄F₃ lines of improved ‘Zaayura’ that were isogenic except for the resistance locus region had phenotypes similar to SARC 1‐57‐2. This study identified a novel aphid resistance locus and demonstrated the effectiveness of integrating SSR and SNP markers for trait mapping and marker‐assisted breeding.     

Isolation and linkage mapping of disease-resistance-like sequences from various rice cultivars, containing different recognition specificities

Degenerated oligonucleotide primers identified from the nucleotide‐binding sites of known disease resistance (R) genes were used from rice cultivars harbouring different recognition specificities to amplify and clone homologous sequences of R genes. A total of 68 non‐redundant clones, which showed various degrees of sequence homology to R genes, were obtained from 18 rice cultivars. These clones had a high degree of sequence diversity both in the nucleotides and in the predicted amino acids, and were classified into five groups using clustal analysis. Fifteen of the 68 clones were mapped to 17 loci on chromosomes 3, 5, 11 and 12 in the rice molecular linkage map. The loci of the mapped clones correlated with the locations of known rice R genes for blast resistance and bacterial blight resistance on chromosomes 11 and 12. Other mapped loci occurred in cluster on chromosome 3, and correlated with the position of a quantitative trait locus for bacterial blight resistance. The mapping of the R gene homologues may aid the identification and isolation of R gene candidates.     

QTL analysis of resistance to Fusarium head blight in wheat using a 'Wangshuibai'-derived population

Fusarium head blight (FHB) is a devastating disease that reduces the yield, quality and economic value of wheat. For quantitative trait loci (QTL) analysis of resistance to FHB, F₃ plants and F_3:5 lines, derived from a ‘Wangshuibai’ (resistant)/‘Seri82’(susceptible) cross, were spray inoculated during 2001 and 2002, respectively. Artificial inoculation was carried out under field conditions. Of 420 markers, 258 amplified fragment length polymorphism and 39 simple sequence repeat (SSR) markers were mapped and yielded 44 linkage groups covering a total genetic distance of 2554 cM. QTL analysis was based on the constructed linkage map and area under the disease progress curve. The analyses revealed a QTL in the map interval Xgwm533‐Xs18/m12 on chromosome 3BS accounting for up to 17% of the phenotypic variation. In addition, a QTL was detected in the map interval Xgwm539‐Xs15/m24 on chromosome 2DL explaining up to 11% of the phenotypic variation. The QTL alleles originated from ‘Wangshuibai’ and were tagged with SSR markers. Using these SSR markers would facilitate marker‐assisted selection to improve FHB resistance in wheat.     

Mapping of rhizoctonia root rot resistance genes in sugar beet using pathogen response‐related sequences as molecular markers

Rhizoctonia root and crown rot caused by the fungus Rhizoctonia solani is a serious disease of sugar beet. An F_2:3 population from a cross between a resistant and a susceptible parent has been tested for R. solani resistance and a genetic map has been constructed from the corresponding F₂ parents. The map encompasses 38 expressed sequence tags (ESTs) with high similarity to genes which are involved in resistance reactions of plants (R‐ESTs) and 25 bacterial artificial chromosomes (BACs) containing nucleotide binding site (NBS)‐motifs typical for disease resistance genes. Three quantitative trait loci (QTL) for R. solani resistance were found on chromosomes 4, 5 and 7 collectively explaining 71% of the total phenotypic variation. A number of R‐ESTs were mapped in close distance to the R. solani resistance QTL. In contrast, the NBS‐BACs mapped to chromosomes 1, 3, 7 and 9 with two major clusters of NBS‐BACs on chromosome 3. No linkage between NBS‐BACs and R. solani resistance QTL was found. The data are discussed with regard to using R‐ESTs and NBS markers for mapping quantitative disease resistances.     

Mapping of quantitative trait loci conferring resistance to bacterial wilt in tobacco (Nicotiana tabacum L.)

Tobacco bacterial wilt (TBW) is one of the most serious tobacco diseases in the world. Studies have shown that tobacco resistance to TBW is quantitatively inherited. This study aimed to map quantitative trait loci (QTL) conferring TBW resistance. An F_2 : 3 population containing 237 lines was developed from a cross between two flue‐cured tobacco cultivars, ‘Yanyan 97’ (YY97; moderately resistant to TBW) and ‘Honghua Dajinyuan’ (HD; highly susceptible to TBW), and a linkage map consisting of 201 simple sequence repeats (SSR) markers and spanning a total length of 2326.7 cM was constructed based on the population. Field experiments were conducted 2011 and 2012, and disease symptoms were investigated three times in each year. The phenotypic data were analysed either separately or jointly for QTL mapping using the software QTLNetwork 2.1. Eight QTL with significant main effects were mapped on chromosomes 2, 6, 12, 17 and 24. A major QTL (qBWR17a) was detected on chromosome 17, which explained up to 30% of the phenotypic variation. The results can facilitate marker‐assisted selection (MAS) in TBW resistance breeding programme.     

Identification of a SCAR marker associated with Bm, the beet mosaic virus resistance gene, on chromosome 1 of sugar beet

Beet mosaic virus (BtMV) is an aphid transmitted, viral disease of beet found worldwide. The Bm gene, a resistance gene effective against BtMV, was identified in the sugar beet line 8500 and backcrossed into a C37 background to produce line C719. Three populations were developed from the cross of line C719 with the susceptible line C37 with the intent of developing markers for use in marker‐assisted selection. The F₂ progeny of three crosses were scored for resistance. Two of the three populations conformed to a 3 : 1 ratio, indicating a single gene trait. Sequence characterized amplified region (SCAR) markers were developed by using bulked segregant analysis combined with random amplified polymorphic DNA type markers. The markers showed close association to the Bm resistance gene and were effective in all three populations. The A₁ allele for genetic male sterility also was found to be associated with Bm and the SCAR marker. Development of a single‐nucleotide polymorphism marker from the SCAR sequence was used to validate linkage to chromosome 1 using separate mapping populations. This marker will be useful for the introgression of the Bm gene into germplasm.     

Identification of resistance gene analogs as markers of disease resistance loci in oats, using near-isogenic lines

Genomic sequences with features of the major class of disease resistance genes and which bear nucleotide‐binding leucine‐rich repeat sequences (resistance gene analogs; RGA) were tested as potential markers of crown rust resistance loci in hexaploid oats. Two collections of paired near‐isogenic lines carrying resistance to different isolates of crown rust, Puccinia coronata were screened. Two out of the four RGAs assayed showed restriction fragment length polymorphism (RFLP) between one line of each collection and its recurrent parent. The paired lines X466 and D494 were polymorphic for RGA III2.2 and the pair of lines X470 and D504 were polymorphic for RGA III2.18. The III2.18 polymorphism was located in the hexaploid map Avena byzantina cv. ‘Kanota’ × A. sativa cv. ‘Ogle’ in linkage group KO17 in a region previously associated with crown rust resistance. In addition, 220 random primers were used for random amplified polymorphic DNA (RAPD) analysis to screen the two sets of NILs. Only one polymorphic band was obtained that differentiated the paired lines X470 and D504 from their parents. The RAPD band was used as a probe and the relevant RFLP that differentiated the NILs X470 and D504 was found at 1.7 cM from the III2.18 marker in KO17. RFLP analysis using probes previously mapped in KO17 confirmed differences for X470 and D504 in the region around the III2.18 marker. These results suggest that the resistance locus shared by this pair of NILs is probably linked to the markers revealed by RGA III2.18. The use of RGAs as RFLP probes in the screening of NILs with differences in crown rust resistance has proved to be more effective than RAPDs for finding polymorphic markers possibly linked to resistance loci.     

A major QTL effect controlling resistance to powdery mildew in winter wheat at the adult plant stage

Powdery mildew is one of the major diseases of wheat in regions with a maritime or semi‐continental climate which can strongly affect grain yield. The objective of the study was to identify and compare quantitative resistance to powdery mildew of line RE9001 at the adult plant and vernalized seedling stages. RE9001 has no known Pm gene and shows a high level of adult plant resistance in the field. Using 104 recombinant inbred lines (RILs) of an RE9001 × ‘Courtot’ F8 population, a genetic map was developed with 363 markers distributed over 26 linkage groups and covering 3825 cM. The global map density was 1 locus/10.3 cM. RILs were assessed under field and tunnel greenhouse conditions for 2 years in two locations. Eleven quantitative trait loci (QTL) were detected at the adult stage and they explained 63% of the variation, depending on the environment. Three QTLs were found, at least, in the two environments. One QTL from RE9001, mapped on chromosome 2B, was stable in each environment. This QTL, QPm.inra.2B, explained 10.3–36.6% of the variation and could be mapped in the vicinity of the Pm6 gene. At the vernalized seedling stage, one QTL detected by the isolate 93‐27 could be an allele of the Pm3g gene present in ‘Courtot’. No residual effect of the Pm3g gene was detected at either stage. Markers flanking the QTL 2B could be useful tools to combine resistance to powdery mildew in wheat cultivars.     

Mapping a new source of resistance to powdery mildew in mungbean

Both restriction fragment length polymorphism (RFLP) and amplified fragment length polymorphism (AFLP) analyses were employed to map a new source of resistance to powdery mildew in mungbean. Disease scores of an F₂ population derived from the cross between a moderately resistant breeding line VC1210A and a susceptible wild relative (Vigna radiata var. sublobata, accession TC1966) showed a continuous distribution and was treated as a quantitative trait. Although no significant quantitative trait loci (QTL) that can explain the variation was detected by QTL analysis based on the reconstructed RFLP linkage map, new marker loci associated with resistance were discovered by AFLP analysis. The RFLP loci detected by two of the cloned AFLP bands are associated with resistance and constitute a new linkage group. A major resistance quantitative trait locus was found on this linkage group that accounted for 64.9% of the variation in resistance to powdery mildew. One of the probes developed in this study has the potential to assist in breeding for powdery mildew resistance in mungbean.     

Development of cleaved amplified polymorphic sequence (CAPS) markers linked to a green rice leafhopper resistance gene, Grh3(t)

The chromosomal location of the resistance gene for green rice leafhopper (GRLH), an injurious insect for rice, has been determined and RFLP markers closely linked to this gene have been identified. The susceptible japonica rice variety ‘Nipponbare’ was crossed with a resistant japonica rice line ‘Aichi42’, in which green rice leaf hopper resistance had been introduced from an indica variety ‘Rantaj‐emas2’, and the 100 F₂ plants obtained were used for linkage analysis. The green rice leafhopper resistance gene, Grh3(t), was mapped between RFLP markers C288B and C133A on chromosome 6 and co‐segregated with C81. Of the RFLP markers tightly linked to Grh3(t), C81 was converted to a SCAR marker and C133A to a cleaved amplified polymorphic sequence marker that could distinguish the heterozygous genotype to establish an effective marker‐aided selection system for the GRLH resistance gene.     

Identification of a molecular marker linked to the closed capsule mutant trait in sesame using AFLP

The identification of an amplified fragment length polymorphism (AFLP) marker linked to an agronomically useful trait in sesame is reported. A bulked segregant analysis (BSA) approach was adopted on segregating progenies of a cross between the closed capsule mutant line ‘cc3’, and the Turkish variety ‘Muganli‐57′. A total of 72 primer combinations were screened for linkage to the trait, but only one closely linked amplified fragment length polymorphism (AFLP) marker was identified. The linkage was confirmed by analysing the AFLP profile from single plants. The marker has the potential to accelerate breeding programmes aimed at modifying unwanted side‐effects of the closed capsule mutation by marker‐assisted selection.     

RAPD and SCAR markers for powdery mildew resistance gene er in pea

In pea, a single recessive gene (er) on linkage group 6 confers resistance to powdery mildew caused by Erysiphe pisi. The present study aims to identify molecular markers linked to the er gene. Screening of the powdery mildew‐resistant cultivar ‘DMR11’ and its susceptible nearisogenic line for polymorphism revealed linkage of two RAPD primers (OPO‐02 and OPU‐17) to the er gene and a sequence characterized polymorphic region (SCAR) primer, ScOPD‐10₆₅₀ with er in a population of 83 F₂ plants in the order: OPU‐17 ‐ er ‐ ScOPD‐10₆₅₀ ‐ OPO‐02. The markers ScOPD‐10₆₅₀ and OPU‐17 being coupled with the allele causing resistance would substantially increase the efficiency of marker‐assisted selection in peabreeding for powdery mildew.     

Mapping of QTLs detected in a <Emphasis Type="Italic">Brassica napus</Emphasis> DH population for resistance to <Emphasis Type="Italic">Sclerotinia sclerotiorum</Emphasis> in multiple environments

Sclerotinia stem rot, caused by the fungus Sclerotinia sclerotiorum, is one of the most devastating diseases of rapeseed (Brassica napus L.) in China. The two major factors limiting the development of disease resistance are (1) the absence of accessions with complete resistance and (2) the lack of a single method that can be widely applied to assess tolerance—even though accessions with differential tolerance to S. sclerotiorum have been identified in China. In the study reported here, we have used one doubled haploid (DH) population consisting of 72 lines, which was derived from the F₁ generation of a cross between a partially resistant line (DH821) and a susceptible line (DHBao604), to identify quantitative trait loci (QTLs) involved in the resistance to S. sclerotiorum. Three inoculation methods, namely, mycelial toothpick inoculation (MTI), mycelial plug inoculation (MPI), and infected petal inoculation (IPI), were used to assess resistance at the adult plant stage. A genetic linkage map with 20 linkage groups covering 1746.5 cM, with an average space of 6.93 cM, was constructed using a total of 252 molecular markers, including 91 simple sequence repeats, 72 randomly amplified polymorphic DNA, 86 sequence-related amplified polymorphisms, two restriction fragment length polymorphisms, and one expressed sequence tag. Composite interval mapping identified ten, one and ten QTLs using MTI, MPI and IPI methods, respectively, at a LOD > 2.5. One QTL was detected in linkage group N12 by MTI in 2004 and 2005 and by IPI in 2005. Another QTL was detected in linkage group N3 and N4 by MPI in 2006 and 2007. There was one common QTL detected by MTI in 2005 and by MPI in 2006. These results provide information on the genetic control of resistance to S. sclerotiorum in oilseed rape.     

DAF marker tightly linked to a major locus for Ascochyta blight resistance in chickpea (Cicer arietinum L.)

Resistance of chickpea against the disease caused by the ascomycete Ascochyta rabiei is encoded by two or three quantitative trait loci, QTL1, QTL2 and QTL3. A total of 94 recombinant inbred lines developed from a wide cross between a resistant chickpea line and a susceptible accession of Cicer reticulatum, a close relative of cultivated chickpea, was used to identify markers closely linked to QTL1 by DNA amplification fingerprinting in combination with bulked segregant analysis. Of 312 random 10mer oligonucleotides, 3 produced five polymorphic bands between the parents and bulks. Two of them were transferred to the population on which the recent genetic map of chickpea is based, and mapped to linkage group 4. These markers, OPS06-1 and OPS03-1, were linked at LOD-scores above 5 to markers UBC733B and UBC181A flanking the major ascochyta resistance locus. OPS06-1 mapped at the peak of the QTL between markers UBC733B (distance 4.1 cM) and UBC181A (distance 9.6 cM), while OPS03-1 mapped 25.1 cM away from marker UBC733B on the other flank of the resistance locus. STMS markers localised on this linkage group were transferred to the population segregating for ascochyta resistance. Three of these markers were closely linked to QTL1. Twelve of 14 STMS markers could be used in both populations. The order of STMS markers was essentially similar in both populations, with differences in map distances between them. The availability of flanking STMS markers for the major resistance locus QTL1 will help to elucidate the complex resistance against different Ascochyta pathotypes in future. This revised version was published online in August 2006 with corrections to the Cover Date.     

QTL analysis of resistance to Fusarium head blight in wheat using a 'Frontana'-derived population

Fusarium head blight (FHB or head scab) has become a major limiting factor for sustainable wheat (Triticum aestivum L.) production around the world. For quantitative trait loci (QTL) analysis of resistance to FHB, F₃ plants and F_{3 : 5} lines, derived from a ‘Frontana’ (moderately resistant)/‘Seri82’ (susceptible) cross, were spray‐inoculated in 2001 and 2002, respectively. Artificial inoculations were carried out under field conditions. Of 273 SSR and AFLP markers, 250 could be mapped and they yielded 42 linkage groups, covering a genetic distance of 1931 cM. QTL analysis was based on the constructed linkage map and area under the disease progress curve (AUDPC). The analyses revealed three consistent QTLs associated with FHB resistance on chromosomes 1BL, 3AL and 7AS explaining 7.9%, 7.7% and 7.6% of the phenotypic variation, respectively, above 2 years. The results confirmed the previously described resistance QTL of ‘Frontana’ on chromosome 3AL. A combination of ‘Frontana’ resistance with ‘Sumai‐3’ resistance may lead to lines with augmented resistance expression.     

Backcross breeding for improved resistance to common bacterial blight in pinto bean (Phaseolus vulgaris L.)

Common bacterial blight (CBB) caused by Xanthomonas campestris pv. phaseoli reduces common bean (Phaseolus vulgaris L.) yield and quality worldwide. Genetic resistance provides effective disease control; however. a high level of resistance is difficult to attain and does not exist in pinto bean, the most important dry bean market class in North America. Our objective was to determine if a backcross breeding approach with the aid of molecular markers linked to quantitative trait loci (QTL) for resistance to CBB in a donor parent could be used to attain higher levels of resistance to CBB in pinto bean. QTL conditioning CBB resistance from the donor parent XAN 159 were introgressed into the recurrent parent‘Chase’using classical backcross breeding and intermittent marker‐assisted selection.‘Chase’pinto bean is moderately resistant and the breeding line XAN 159 is highly resistant to Xanthomonas campestris. Marker assays confirmed the presence of independent QTL from GN no. 1 Sel 27 and XAN 159 in advanced backcross‐derived pinto bean lines with improved CBB resistance. Agronomic characteristics of‘Chase’were fully recovered in the backcross‐derived lines. An important QTL for CBB resistance from XAN 159 on linkage group B6 was not introgressed because tight linkage between this QTL and the dominant V allele that causes an unacceptable black‐mottled seed coat colour pattern in pinto bean could not be broken.     

Molecular and physical mapping of genes affecting awning in wheat

Quantitative trait loci (QTL) for three traits related to awning (awn length at the base, the middle and the top of the ear) in wheat were mapped in a doubled‐haploid line (DH) population derived from the cross between the cultivars ‘Courtot’ (awned) and ‘Chinese Spring’ (awnless) and grown in Clermont‐Ferrand, France, under natural field conditions. A molecular marker linkage map of this cross that was previously constructed based on 187 DH lines and 550 markers was used for the QTL mapping. The genome was well covered (more than 95%) and a set of anchor loci regularly spaced (one marker every 20.8 cM) was chosen for marker regression analysis. For each trait, only two consistent QTL were identified with individual effects ranging from 8.5 to 45.9% of the total phenotypic variation. These two QTL cosegregated with the genes Hd on chromosome 4A and B2 on chromosome 6B, which are known to inhibit awning. The results were confirmed using ‘Chinese Spring’ deletion lines of these two chromosomes, which have awned spikes, while ‘Chinese Spring’ is usually awnless. No quantitative trait locus was detected on chromosome 5A where the B1 awn‐inhibitor gene is located, suggesting that both ‘Courtot’ and ‘Chinese Spring’ have the same allelic constitution at this locus. The occurrence of awned speltoid spikes on the deletion lines of this chromosome suggests that ‘Chinese Spring’ and ‘Courtot’ have the dominant B1 allele, indicating that B1 alone has insufficient effect to induce complete awn inhibition.