Immobilization of Cationic Titanium Dioxide (TiO<Subscript>2</Subscript><Superscript>+</Superscript>) on Electrospun Nanofibrous Mat: Synthesis,Characterization, and Potential Environmental Application

We report a facile approach to fabrication and characterization of cationic titanium dioxide (TiO₂⁺) on poly (vinyl alcohol)/poly (acrylic acid) (PVA/PAA) composite electro-spun nanofibrous mat. The aim of this study is to develop a “functional electrospun nanofibrous mat” as a sustainable approach to superior photocatalytic degradation of organic colorants. For that, the PVA/PAA nanofibrous mat was prepared by electrospinning of PVA and PAA solution according to an aspect ratio of 1:1 and later water stability was induced by the thermal cross linking at an elevated temperature of 145 °C for 30 minute. By means of electrostatic layer-by-layer (LbL) assembly, cationic titanium dioxide (TiO₂⁺, ~19 nm) was immobilized on the surface of the water stable nanofibrous mat. As functionalized composited nanofibrous mat was characterized by using scanning electron microscope (SEM), fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) analysis and thermogravimetric analysis (TGA). Superior competency of the functionalized nanofibrous mat towards photocatalytic degradation of organic dye (methyl blue) in aqueous solution was observed by using UV-visible spectrophotometer with quantitative measuring method. The result indicates a complete degradation of methyl blue within 40 mins and superior reusability upto 5 cycles application. The study signifies the prospect of using electrospun nanofibers to manipulate the catalytic activity, which could be a foundation for further rational design of various composite nanofibrous materials.     

Electrospun in-situ hybrid polyurethane/nano-TiO<Subscript>2</Subscript> as wound dressings

By combining the organic-inorganic hybridization, wet phase inversion, and electrospinning, novel electrospun polyurethane (PU) membranes with in-situ generated nano-TiO₂ were prepared, which satisfied the requirements of an ideal wound dressing. The morphology of the PU-TiO₂ mats and the cross sectional morphologies of the membranes were characterized by a scanning electron microscopy (SEM). The average diameter of the individual fibers obtained from the solutions was 341±12 nm. SEM micrographs with higher magnification further showed that the in-situ generated TiO₂ particles were well-separated and dispersed homogeneously in the membranes. The average sizes of TiO₂ particles were increased from 31 to 57 nm, with the increase of nano-TiO₂ concentration. The water vapor transmission rates (WVTRs) of the membranes were in the range of 373.55–3121.86 g/m²·d and decreased gradually with the increase of nano-TiO₂ concentration. The water absorption of various PU membranes was in the range of 210.90–397.98 % which was enough to prevent wound beds from exudate accumulation. Shake flask testing indicated that the PU membrane exhibited antibacterial efficiency against Pseudomonas aeruginosa (Ps. aeruginosa) and Staphylococcus aureus (S. aureus) due to in-situ generated of nano-TiO₂. These electrospun nanofibrous membranes also had no toxic effect and showed good and immediate adherence to L929 cells.     

Enhanced dielectric properties of electrospun titanium dioxide/polyvinylidene fluoride nanofibrous composites

Titanium dioxide/polyvinylidene fluoride (TiO₂/PVDF) composite was prepared by electrospinning process to enhance the dielectric properties for application as a gate insulator in organic thin-film transistors (OTFTs). Scanning electron microscopy, thermogravimetric analysis, and X-ray diffraction were employed to characterize the as-prepared samples, and then their dielectric constants were investigated by impedance analysis. The impedance results show that the dielectric constant of the electrospun TiO₂/PVDF nanofibers is higher than those of other samples, demonstrating that electrospun TiO₂/PVDF composite can be a proper candidate for gate insulators in OTFTs.     

Spherical Bacterial Cellulose/TiO<Subscript>2</Subscript> Nanocomposite with Potential Application in Contaminants Removal from Wastewater by Photocatalysis

Contaminants are often found in aquatic environments, for instance, heavy metals, dyes, parasites, pesticides, hormones and pharmaceuticals. Therefore, large amounts of these contaminants reaches wastewater via industrial and domestic effluents, causing major concern to human health. Heterogeneous photocatalysis is a technique for removing these contaminants in order to achieve better efficiency in water treatment. Then, bacterial cellulose (BC) produced in an agitated culture can form spherical bodies composed of nanofibers with high specific surface area. Moreover, Titanium dioxide (TiO₂) is a semiconductor containing high photocatalytic activity capacity. Thus, the main objective in this work was to produce spherical BC/TiO₂ nanocomposites for contaminants removal from wastewater by photocatalysis process. The incorporation of TiO₂ nanoparticles in the spherical BC matrix was performed by ex situ and in situ methods. In addition, Scanning Electron Microscope (SEM), Energy Dispersive Spectroscopy (EDS), Fourier Transform Infrared Spectroscopy (FTIR) and Thermogravimetric Analysis (TGA) were used as tools of morphological, chemical and thermal characterizations of the nanocomposites. Besides, photocatalysis tests were performed in order to evaluate the removal efficiency of methylene blue from aqueous solutions. The results of these tests exhibited a percentage of methylene blue removal of 70.83 and 89.58 % after 35 minutes for spherical BC/TiO₂ nanocomposites both, in situ and ex situ, respectively. Therefore, these results demonstrated that BC/TiO₂ to be a low cost material with high capacity of contaminants removing and a great potential for industrial applications.     

Nano-TiO<Subscript>2</Subscript> based multilayer film deposition on cotton fabrics for UV-protection

Nano-TiO₂ based multilayer nanocomposite films were fabricated on cationically modified woven cotton fabrics by layer-by-layer molecular self-assembly technique. Cationization process was used to obtain cationic surface charge on cotton fabrics. Attenuated total reflectance Fourier transform infrared spectroscopy analyses were used to verify the presence of cationic surface charge and multilayer films deposited on the fabrics. Scanning electron microscope micrographs of poly(sodium 4-styrene sulfonate)/TiO₂, nano polyurethane/TiO₂, and TiO₂/poly(diallyldimethylammonium chloride) multilayer films deposited on cotton fabrics were taken. With nano-TiO₂ based multilayer film deposition, the protection of cotton fabrics against UV radiation is enhanced. The UV protection durability of the self-assembled multilayer films deposited on the cotton fabrics was analyzed after 10 and 20 washing cycles at 40 °C for 30 min. Air permeability and whiteness value analysis were performed on the untreated and multilayer film deposited cotton fabrics. The effect of layer-by-layer deposition process on tensile strength properties of the warp and weft yarns was determined.     

Preparation and UV-protective property of PVAc/ZnO and PVAc/TiO<Subscript>2</Subscript> microcapsules/poly(lactic acid) nanocomposites

The poly(vinyl acetate) (PVAc)/zinc oxide (ZnO) microcapsule and PVAc/titanium dioxide (TiO₂) microcapsule were synthesized via in-situ emulsion polymerization method. The PVAc/ZnO microcapsule and PVAc/TiO₂ microcapsule were characterized by fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis(TG), transmission electron microscopy (TEM), and UV-visible spectroscopy (UV-vis). Effect of PVAc/ZnO microcapsule and PVAc/TiO₂ microcapsule on properties of poly(lactic acid) (PLA) was evaluated by UV-vis, SEM and mechanical properties test. The results showed that the addition of PVAc/ZnO and PVAc/TiO₂ microcapsules as a UV-blocking additive could significantly enhance UV-blocking property of PLA/PVAc/ZnO microcapsule composites and PLA/PVAc/TiO₂ microcapsule composites compared with pure PLA, PLA/ZnO composites and PLA/TiO₂ composites. The mechanical properties of PLA/PVAc/ZnO microcapsule composites were better than those of PLA/ZnO composites due to good dispersability and compatibility of PVAc/ZnO microcapsule in PLA matrix. Also, the mechanical properties of PLA/PVAc/TiO₂ microcapsule composites were better than those of pure PLA and PLA/TiO₂ composites. This study demonstrates the great potentials of the intrinsically UV shield additive PVAc/ZnO and PVAc/TiO₂ microcapsules in the application of high performance matrix resin and composite material.     

Fabrication and characterization of nano Al<Subscript>2</Subscript>O<Subscript>3</Subscript> filled PVA:NH<Subscript>4</Subscript>SCN electrolyte nanofibers by electrospinning

Present paper reports a method of preparing polymer composite electrolyte nanofiber mat using polyvinyl alcohol (PVA), ammonium thiocynate (NH₄SCN) salt, and aluminium oxide (Al₂O₃) nano particles based on electrospinning technique. Two-stage process of preparation of nanofibers, namely, preparation of nano particles filled PVA electrolyte gel solution followed by its electrospinning has been used. The so obtained nanofibers have been characterized by XRD, DSC, SEM, and Conductivity measurements. XRD patterns affirm the formation of nanocomposite while SEM pictures reveal formation of fibers on a nano scale format (300–800 nm). Fibers of the electrolytes are seen to be thermally stable. Ionic conductivity of electrolyte fiber is seen to improve in the presence of nano filler at room temperature with a maximum at 5.31×10⁻³ Scm⁻¹ for 4 wt% filler concentration, which is comparable to that for corresponding dried gel electrolyte films.     

Synthesis,analysis and simulation of carbonized electrospun nanofibers infused carbon prepreg composites for improved mechanical and thermal properties

This paper reports the fabrication, characterization and simulation of electrospun polyacrylonitrile (PAN) nanofibers into pre-impregnated (prepreg) carbon fiber composites for different industrial applications. The electrospun PAN nanofibers were stabilized in air at 270 °C for one hour and then carbonized at 950 °C in an inert atmosphere (argon) for another hour before placing on the prepreg composites as top layers. The prepreg carbon fibers and carbonized PAN nanofibers were cured together following the prepreg composite curing cycles. Energy dispersive X-ray spectroscopy (EDX) was carried out to investigate the chemical compositions and elemental distribution of the carbonized PAN nanofibers. The EDX results revealed that the carbon weight % of approximately 66 (atomic % 72) was achieved in the PAN-derived carbon nanofibers along with nitrogen and lower amounts of nickel, oxygen and other impurities. Thermomechanical analysis (TMA) exhibited the glass transition regions in the prepreg nanocomposites and the significant dependence of coefficient of thermal expansion on the fiber directions. The highest value of coefficient of thermal expansion was observed in the temperature range of 118-139 °C (7.5×10^-8 1/°C) for 0 degree nanocomposite scheme. The highest value of coefficient of thermal expansion was observed in the temperature range of 50-80 °C (37.5×10^-6 1/°C) for 90 degree nanocomposite scheme. The test results were simulated using ANSYS software. The test results may be useful for the development of structural health monitoring of various composite materials for aircraft and wind turbine applications.     

Transparent Polycaprolactam Electrospun Nanofibers Doped with 1,10-phenanthroline Optical Sensor for Colorimetric Determination of Iron (II) and Vitamin C

A novel optical chemical sensor based on a transparent electrospun nanofibrous scaffold, composed of polycaprolactam (PA6) and 1,10-phenanthroline (Phen), deposited on a glass slide and impregnated with polyvinyl alcohol (PVA) was coupled with UV-vis spectrophotometry and used for colorimetric determination of ferrous ion (Fe²⁺) and ascorbic acid (AA). The electrospun nanofibers were characterized using scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR) techniques. The main factors affecting performance of the optical sensor (PA6-Phen/PVA@glass) including Phen dosage, pH of sample solution, electrospinning time, polymer solution flowrate, electrospinning voltage, and PVA amount were investigated and the related optimum values were obtained. The analytical merits of the sensor for quantitative determination of Fe²⁺ and ascorbic acid was evaluated. The limit of detection (LOD) and limit of quantification (LOQ) for Fe²⁺ were 1 and 3 μg mL^-1, respectively. The linear dynamic range (LDR) was 3–150 μg mL^-1 with the determination coefficient (R²) of 0.991. The relative standard deviation (RSD %, n=3) for a solution of 60 μg mL^-1 was 5.4 %. For determination of AA, LOD and LOQ were obtained equal to 0.5 and 2 μg mL^-1, respectively. The linear dynamic range was in the 2–200 μg mL^-1 range with a R2 of 0.994. The RSD % at 100 μg mL^-1, n=3) was equal to 7.0 %. The sensor was applied successfully to the detection of Fe(II) and AA in real water samples and aspirin tablets.     

Preparation of TiO<Subscript>2</Subscript>-coated ZnO Nanoparticles and Their Effect on the UV Absorption of a Poly(vinyl alcohol) Composite Film

Titanium oxide (TiO₂) and zinc oxide (ZnO) composite structured nanoparticles were prepared by combining a sol-gel process and a solvothermal method. Titanium (IV) isoproxide (TTIP), used as a TiO₂ precursor, was dissolved in a colloidal ZnO nanoparticle solution synthesized by the sol-gel method, and TiO₂ was synthesized via solvothermal synthesis onto the ZnO nanoparticles. The effects of reaction conditions such as pH, reaction temperature, and reaction time on the morphology of the composite nanoparticles and the ultraviolet (UV) absorbance of their polymer composite films were investigated. The UV absorption of the poly(vinyl alcohol) (PVA) composite film with TiO₂-coated ZnO nanoparticles was higher than that of the TiO₂, ZnO, and ZnO-coated TiO₂ composite films. The reaction pH was found to have the strongest influence on the UV absorbance of the PVA/(TiO₂/ZnO) composite film. A pH of 7.0, reaction temperature of 250 °C, and reaction time of 24 h were the optimum conditions for UV absorption.     

A Novel Green Stabilization of TiO<Subscript>2</Subscript> Nanoparticles onto Cotton

Facile embedding of TiO₂ nanoparticles onto cotton fabric has been successfully attained by ultraviolet light irradiations. The adhesion of nanoparticles with fibre surface, tensile behaviour and physicochemical changes before and after ultraviolet treatment were investigated by scanning electron microscopy, energy dispersive X-ray and inductive couple plasma-atomic emission spectroscopy. Experimental variables i.e. dosage of TiO₂ nanoparticles, temperature of the system and time of ultraviolet irradiations were optimised by central composite design and response surface methodology. Moreover, two different mathematical models were developed for incorporated TiO₂ onto cotton and tensile strength of cotton after ultraviolet treatment and used further to testify the obtained results. Self-clean fabric through a synergistic combination of cotton with highly photo active TiO₂ nanoparticles was produced. Stability against ultraviolet irradiations and self-cleaning properties of the produced fabric were evaluated.     

Multifunctional modification of wool fabric using graphene/TiO<Subscript>2</Subscript> nanocomposite

In this study, a new finishing technique is introduced through treatment of wool fabric with graphene/TiO₂ nanocomposite. Graphene oxide/titanium dioxide nanocomposite first applied on the wool fabric by hydrolysis of titanium isopropoxide in graphene oxide suspension and then this coating chemically converted by sodium hydrosulfite to graphene/TiO₂ nanocomposite. The homogenous distribution of the graphene/TiO₂ nanocomposite on the fiber surface was confirmed by field emission scanning electron microscopy (FE-SEM), Energy-dispersive X-ray spectroscopy (EDS) and X-ray mapping. X-ray diffraction patterns proved the presence of titanium dioxide nanoparticles with a crystal size of 127 Å on the treated wool fabric. Also, the defect analysis based on X-ray photoelectron spectroscopy (XPS) established the composition of the nanocomposite. Other characteristics of treated fabrics such as antibacterial activity, photo-catalytic self-cleaning, electrical resistivity, ultraviolet (UV) blocking activity and cytotoxicity were also assessed. The treated wool fabrics possess significant antibacterial activity and photo-catalytic self-cleaning property by degradation of methylene blue under sunlight irradiation. Moreover, this process has no negative effect on cytotoxicity of the treated fabric even reduces electrical resistivity and improves UV blocking activity.     

Development and characterization of multifunctional electrospun ferric oxide-gelatin-glycerol nanofibrous mat for wound dressing applications

In this study, we developed optimal multifunctional electrospun wound dressings possessing an antibacterial activity and rich in iron, a vital trace element for cell growth. Therefore, synthetic ferric oxide nanoparticles (α-Fe₂O₃ NPs) were ultrasonically dispersed into preheated gelatin-glycerol solution. A variety of techniques (X-ray diffraction (XRD), Fourier transform infrared (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), differential thermal analysis (DTA), in-vitro swelling-degradation studies and antibacterial tests) were used to characterize the electrospun mats. The results highlight that α-Fe₂O₃ NPs could be successfully dispersed into the electrospun gelatin nanofibers. The electrospun ferric oxide-gelatin-glycerol nanofibrous mats revealed free beads nanofibers with appropriated swelling-degradation behavior. It was observed that addition of α-Fe₂O₃ NPs enhanced the antibacterial activity of electrospun mats against positive and negative bacteria.     

Electrospun poly(tetrafluoroethylene) nanofiber membranes from PTFE-PVA-BA-H<Subscript>2</Subscript>O gel-spinning solutions

As a kind of high-performance fibers, PTFE fiber has been widely used in many fields because of its unique characteristics. In this study, the poly(tetrafloroethylene) (PTFE) nanofibers manufactured by electrospinning method was reported. The gel-spinning solution of poly(tetrafluoroethylene)/poly(vinyl alcohol)/boric acid (PTFE/PVA/BA), which was prepared by the gel process of the mixture of PTFE, PVA, BA and redistilled water, was electrospun to form PTFE/PVA/BA composite nanofibers. After calcinating, the PTFE nanofibers with diameters of 200 nm to 1000 nm were obtained. The fibers before and after calcinating were characterized by scanning electron microscopy (SEM), thermogravimetric analysis (TGA), X-ray diffraction (XRD), FT-IR spectrum analysis and X-ray photoelectron spectroscopy (XPS), respectively, and the mechanical and hydrophobic properties of the fibers were also investigated. The results showed that the PTFE nanofiber membranes could be electrospun effectively used the gel-spinning solution of PTFE/PVA/BA, and may realize the applications in the fields of high-temperature filtration, catalyst supports, battery separator and so on.     

Effects of ferric chloride on structure, surface morphology and combustion property of electrospun polyacrylonitrile composite nanofibers

In this work, the pure polyacrylonitrile (PAN) nanofibers and PAN/FeCl₃ composite nanofibers were prepared by an electrospinning process. Electrospinning solution properties including viscosity, surface tension and conductivity, had been measured and combined with the results of Scanning electron microscopy (SEM), Atomic force microscope (AFM) and Micro Combustion Calorimeter (MCC) to investigate the effects of FeCl₃ on the structure, surface morphology and combustion property of electrospun PAN nanofibers, respectively. It was found from SEM images that the diameters of composite nanofibers were decreased with the addition of FeCl₃, which was attributed predominantly to the increased conductivity of the polymer solutions compared to viscosity and surface tension. The AFM analyses revealed that the surface morphology of electrospun nanofibers changed from smooth and wrinkle-like structure (without FeCl₃) to rough and ridge-like structure (with FeCl₃). The results characterized by MCC showed that the loading of FeCl₃ decreased the heat release rate (HRR) and improved the combustion property of composite nanofibers.     

Electrospun titanium dioxide nanofibers: Fabrication,properties and its application in photo-oxidative degradation of methyl orange (MO)

In this study, we synthesed two kind of TiO₂ nanomaterial (nanoparticles and nanofiber) for photocatalitic degradation of methyl orange (MO) as pollutant. TiO₂ nanoparticles were synthesized by sol-gel technique using titanium (IV) isopropoxide as precursor. Polyvinyl acetate (PVAc)/TiO₂ hybrid nanofibers were fabricated by combining sol-gel process with electrospinning technology, which consisted of PVAc as organic segment and TiO₂ as inorganic part. Crystalline phase of TiO₂ nanomaterials was investigated by X-ray diffraction (XRD). The XRD results show that the TiO₂ nanomaterials crystallize in anatase with some rutile phase and these consist of titanium dioxide nano-crystals. The surface structures of TiO₂ nanomaterials were examined using scanning electron microscopy (SEM). SEM scanning revealed that the nanoparticle and nanofibrous structure was formed. Fourier transform infrared spectroscopy (FTIR) was employed to analyze the chemical structures of the PVAc/TiO₂ hybrid nanofibers. The FTIR analysis indicated the newly formed associated hydrogen bond because of the hybrid effect between PVAc and TiO₂ sol. Finally, The photooxidative decomposition of methylene blue by using the titania nanomaterials was examined and compared.     

In situ loading TiO<Subscript>2</Subscript> and its photocatalysis and UV resistance on cotton fabric

Anatase TiO₂ nanoparticles was in-situ formed on the cotton fabric by using tetrabutyl titanate (TBT) as a precursor through the normal pressure hydrothermal method. X-ray diffraction (XRD), Scanning electron microscopy (SEM), UV visible spectra (UV-VIS), ATR-IR were used as the characterization techniques. Photocatalytic performance of TiO₂ on the fabric surface was evaluated by methylene blue (MB), 4 kinds of the common living stains and three dyes under ultraviolet and visible light radiation. XRD analysis found that the TiO₂ loaded on the fabric was mainly anatase crystalline phase with particle size of 6.4 nm. SEM observed that a large number of nano TiO₂ particles are distributed on the fabric surface. UV-VIS test indicated that theTiO₂-coated fabric possessed an obvious absorption for ultraviolet. ATR-IR analysis indicated that the nano-TiO₂ possesses a strong affinity with the hydroxyl group of the cotton fabric, and the soaping tests showed that the TiO₂ was firmly bonded with the fabrics. The treated fabrics have good degradation ability for MB aqueous solution, and could degrade azo, anthraquinone and phthalocyanine dyes. The order of degradation of the common life stains was: pepper oil> tea > coffee > soy sauce.     

Preparation and characterization of porous carbon based nanocomposite for supercapacitor

Porous nanocomposites are prepared by electrospinning blended polyacrylonitrile, copper acetate and mutiwalled carbon nanotube in N, N-dimethylformamide. The electrospun nanofiber webs are oxidatively stabilized and then carbonized resulting in composite carbon nanofibers. The study reveals that composite nanofibers with relatively smooth surface morphology are successfully prepared. X-ray diffraction is used to confirm the presence of Cu in carbon nanofibers. The carbon nanofibers with CNTs have better thermal stability and higher electrical conductivity. The Brunauer-Emmett-Teller analysis reveals that C/Cu/CNTs nanocomposites with mesopores possess larger specific surface area and narrower pore size distribution than that of C/Cu nanofibers. The electrochemical properties are investigated by cyclic voltammetry and galvanostatic charge-discharge tests. The nanocomposite with 0.5 wt.% CNT loading exhibits an energy density of 2 Whkg^?1, power density of 1916 Wkg^?1, a specific capacitance of about 225 Fg^?1 at a current density of 2 Ag^?1 and its capacitance decreased to 78 % of its initial value after 3,000 cycles.     

Ingestive behaviour of beef cattle offered different forms of lucerne (Medicago sativa L.)†

A change-over design was used to establish the ingestive behaviour of twelve adult Angus cows (Bos taurus), live weight (LW) of 475 ± 18 kg, while grazing luceme (Medicago sativa L.) (T₁), eating from a swath of freshly cut lucerne (T₂), or eating wilted lucerne from a swath (T₃). In the first experiment, the herbage dry matter (DM) allowance was 4-7 kg h^?1 and in T₁ the available herbage DM mass (>5 cm) was 2892 kg ha^?1. Herbage DM intake was 2.5, 1.6 and 2.0 kg h^?1 (0.53,0.35 and 0.41 kg (100 kg LW)^?1h^?1) for T₁, T₂ and T₃, respectively. Cattle grazed at 29 bites min^?1 and ate the swathed lucerne at 6 bites min^?1. Herbage DM intake per bite was 1-2, 4-9 and 6-7 (2-5,104 and 14-4 mg(kg LW)^?1)for T₁, T₂ and T₃, respectively. The DM content of the luceme was 227, 263 and 309 g kg^?1 for the same sequence. In a second experiment with luceme of available herbage DM mass of 5321 kg ha^?1 and an allowance of 7- 3 kg h^?1 cows grazed lucerne at 2-9 kg h^?1, ate freshly cut material at 21 kg h^?1 and wilted herbage at 25 kg h^?1 (0.61, 0.45 and 0.52 kg (100 kg LW)^?1h^?1), respectively. Leaf accounted for 80%, 68% and 54% of intake for T₁, T₂ and T₃, respectively. Swathing lucerne reduced the diet selectivity by forcing cattle to take large bites that required many jaw movements to form a bolus that could be swallowed. It appeared that the mechanics of bolus formation determined ingestive behaviour of cattle eating swathed herbage.     

Polyaniline-doped TiO<Subscript>2</Subscript>/PLLA fibers with enhanced visible-light photocatalytic degradation performance

A simple and practical strategy has been developed for preparing polyaniline(PANi)-doped TiO₂/poly(l-lactide) (P@TiP-C) fibers by a combination of coaxial-electrospinning and in-situ polymerization. The TiO₂/PLLA composite fibers with TiO₂ located on the surface were fabricated by coaxial-electrospinning, with PLLA as the core phase and a dispersion of TiO₂ particles, a well-known photocatalyst, in the sheath phase. The aniline monomers were also located in the core phase and in-situ polymerized by ammonium persulfate (APS) after electrospinning. SEM images show that TiO₂ particles were located on the surface of PLLA fibers. Photocatalytic degradation tests show that the P@TiP-C fibers exhibit enhanced photocatalytic activity for degradation of methyl orange under visible light, likely due to the synergistic effect of PANi and TiO₂.