Twinning in MgSiO3 Perovskite

Crystals of MgSiO(3) perovskite synthesized at high pressures and temperatures have orthorhombic symmetry under ambient conditions. Examination by transmission electron microscopy shows that the microstructure of crystals synthesized at 26 gigapascals and 1600 degrees C is dominated by a large number of twin domains that are related by reflection operations with respect to {112} and {110} planes. These twins may be associated with the transformations of MgSiO(3) perovskite from the cubic to tetragonal and tetragonal to orthorhombic phases, respectively, upon decreasing pressure and temperature. These observations suggest that under the experimental synthesis conditions, and perhaps in the earth's lower mantle, the stable phase of MgSiO(3) might have the cubic perovskite structure.     

(Mg,Fe)SiO3-perovskite stability under lower mantle conditions

In three different experiments up to 100 gigapascals and 3000 kelvin, (Mg,Fe)SiO3-perovskite, the major component of the lower mantle, remained stable and did not decompose to its component oxides (Mg, Fe)O and SiO2. Perovskite was formed from these oxides when heated in a diamond anvil cell at pressures up to 100 gigapascals. Both MgSiO3 crystals and glasses heated to 3000 kelvin at 75 gigapascals also formed perovskite as a single phase, as evident from Raman spectra. Moreover, fluorescence measurements on chromium-doped samples synthesized at these conditions gave no indication of the presence of MgO.     

Ultrasonic shear wave velocities of MgSiO3 perovskite at 8 GPa and 800 K and lower mantle composition

Ultrasonic interferometric measurements of the shear elastic properties of MgSiO3 perovskite were conducted on three polycrystalline specimens at conditions up to pressures of 8 gigapascals and temperatures of 800 kelvin. The acoustic measurements produced the pressure (P) and temperature (T) derivatives of the shear modulus (G), namely ( partial differentialG/ partial differentialP)T = 1.8 +/- 0.4 and ( partial differentialG/ partial differentialT)P = -2.9 +/- 0.3 x 10(-2) gigapascals per kelvin. Combining these derivatives with the derivatives that were measured for the bulk modulus and thermal expansion of MgSiO3 perovskite provided data that suggest lower mantle compositions between pyrolite and C1 carbonaceous chondrite and a lower mantle potential temperature of 1500 +/- 200 kelvin.     

Phase Transition and Thermal Expansion of MgSiO3 Perovskite

Results from in situ x-ray diffraction experiments with a DIA-type cubic anvil apparatus (SAM 85) reveal that MgSiO(3) perovskite transforms from the orthorhombic Pbnm symmetry to another perovskite-type structure above 600 kelvin (K) at pressures of 7.3 gigapascals; the apparent volume increase across the transition is 0.7%. Unit-cell volume increased linearly with temperature, both below (1.44 x 10(-5) K(-1)) and above (1.55 x 10(-5) K(-1)) the transition. These results indicate that the physical properties measured on the Pbnm phase should be used with great caution because they may not be applicable to the earth's lower mantle. A density analysis based on the new data yields an iron content of 10.4 weight percent for a pyrolite composition under conditions corresponding to the lower mantle. All current equation-of-state data are compatible with constant chemical composition in the upper and lower mantle; thus, these data imply that a chemically layered mantle is unnecessary, and whole-mantle convection is possible.     

Association reaction in forsterite under shock compression

Transmission electron microscopic observation of forsterite (Mg(2)SiO(4)) shocked to peak pressures of 78 to 92 gigapascals revealed that forsterite breaks down to an assemblage of MgO plus MgSiO(3) glass. This strongly supports the interpretation that the high-pressure phase of forsterite under shock compression is due to the assemblage of MgSiO(3) perovskite plus MgO.     

Stability and structure of MgSiO3 perovskite to 2300-kilometer depth in Earth's mantle

Unexplained features have been observed seismically near the middle (approximately 1700-kilometer depth) and bottom of the Earth's lower mantle, and these could have important implications for the dynamics and evolution of the planet. (Mg,Fe)SiO3 perovskite is expected to be the dominant mineral in the deep mantle, but experimental results are discrepant regarding its stability and structure. Here we report in situ x-ray diffraction observations of (Mg,Fe)SiO3 perovskite at conditions (50 to 106 gigapascals, 1600 to 2400 kelvin) close to a mantle geotherm from three different starting materials, (Mg0.9Fe0.1)SiO enstatite, MgSiO3 glass, and an MgO+SiO2 mixture. Our results confirm the stability of (Mg,Fe)SiO3 perovskite to at least 2300-kilometer depth in the mantle. However, diffraction patterns above 83 gigapascals and 1700 kelvin (1900-kilometer depth) cannot presently rule out a possible transformation from Pbnm perovskite to one of three other possible perovskite structures with space group P2(1)/m, Pmmn, or P4(2)/nmc.     

Post-perovskite phase transition in MgSiO3

In situ x-ray diffraction measurements of MgSiO3 were performed at high pressure and temperature similar to the conditions at Earth's core-mantle boundary. Results demonstrate that MgSiO3 perovskite transforms to a new high-pressure form with stacked SiO6-octahedral sheet structure above 125 gigapascals and 2500 kelvin (2700-kilometer depth near the base of the mantle) with an increase in density of 1.0 to 1.2%. The origin of the D" seismic discontinuity may be attributed to this post-perovskite phase transition. The new phase may have large elastic anisotropy and develop preferred orientation with platy crystal shape in the shear flow that can cause strong seismic anisotropy below the D" discontinuity.     

Elasticity of MgSiO3 in the Perovskite Structure

The single-crystal elastic moduli of MgSiO(3) in the perovskite structure, the high-pressure polymorph of MgSiO(3) pyroxene, have been determined. The data indicate that a mantle with either pyrolite or pyroxene stoichiometry is compatible with the seismic models appropriate to the earth's lower mantle, provided that the shear modulus of MgSiO(3) perovskite exhibits a strong negative temperature derivative. Such a temperature derivative falls outside of the range expected for a well-behaved refractory ceramic and could result if the pressure-temperature regime of the earth's lower mantle is near that required for a ferroelastic phase transformation of the perovskite phase.     

Synthesis and Equation of State of (Mg,Fe) SiO3 Perovskite to Over 100 Gigapascals

Silicate perovskite of composition (Mg(0.88)Fe(0.12)) SiO(3) has been synthesized in a laser-heated diamond-anvil cell to a pressure of 127 gigapascals at temperatures exceeding 2000 K. The perovskite phase was identified and its unit-cell dimensions measured by in situ x-ray diffraction at elevated pressure and room temperature. An analysis of these data yields the first high-precision equation of state for this mineral, with values of the zero-pressure isothermal bulk modulus and its pressure derivative being K(0T) = 266 +/- 6 gigapascals and K'(0T) = 3.9 +/- 0.4. In addition, the orthorhombic distortion of the silicate-perovskite structure away from ideal cubic symmetry remains constant with pressure: the lattice parameter ratios are b/a = 1.032 +/- 0.002 and c/a = 1.444 +/- 0.006. These results, which prove that silicate perovskite is stable to ultrahigh pressures, demonstrate that perovskite can exist throughout the pressure range of the lower mantle and that it is therefore likely to be the most abundant mineral in Earth.     

High-Temperature Phase Transition and Dissociation of (Mg, Fe)SiO3 Perovskite at Lower Mantle Pressures

To study the crystallography of Earth's lower mantle, techniques for measuring synchrotron x-ray diffraction from a laser-heated diamond anvil cell have been developed. Experiments on samples of (Mg, Fe)SiO(3) show that silicate perovskite maintains its orthorhombic symmetry at 38 gigapascals and 1850 kelvin. Measurements at 65 and 70 gigapascals provide evidence for a temperature-induced orthorhombic-to-cubic phase transition and dissociation to an assemblage of perovskite and mixed oxides. If these phase transitions occur in Earth, they will require a significant change in mineralogical models of the lower mantle.     

Negative Pressure-Temperature Slopes for Reactions Formign MgSiO3 Perovskite from Calorimetry

A new and sensitive differential drop solution calorimetric technique was developed for very small samples. A single experiment using one 5.18-milligram sample of perovskite, synthesized at 25 gigapascals and 1873 Kelvin, gave 110.1 +/- 4.1 kilojoules per mole for the enthalpy of the ilmenite-pervoskite transition in MgSiO(3). The thermodynamics of the reaction of MgSiO(3) (ilmenite) to MgSiO(3) (perovskite) and of Mg(2)SiO(4) (spinel) to MgSiO(3) (pervoskite) and MgO (periclase) were assessed. Despite uncertainties in heat capacity and molar volume at high pressure and temperature, both reactions clearly have negative pressure-temperature slopes, -0.005 +/- 0.002 and -0.004 +/- 0.002 gigapascals per Kelvin, respectively. The latter may be insufficiently negative to preclude whole-mantle convection.     

The postspinel phase boundary in Mg2SiO4 determined by in situ X-ray diffraction

The phase boundary between spinel (gamma phase) and MgSiO3 perovskite + MgO periclase in Mg2SiO4 was determined by in situ x-ray measurements by a combination of the synchrotron radiation source (SPring-8) and a large multianvil high-pressure apparatus. The boundary was determined at temperatures between 1400 degrees to 1800 degreesC, demonstrating that the postspinel phase boundary has a negative Clapeyron slope as estimated by quench experiments and thermodynamic analyses. The boundary was located at 21.1 (+/-0.2) gigapascals, at 1600 degreesC, which is approximately 2 gigapascals lower than earlier estimates based on other high-pressure studies.     

Grain Growth Rates of MgSiO3 Perovskite and Periclase Under Lower Mantle Conditions

The grain growth rates of MgSiO3 perovskite and periclase in aggregates have been determined at 25 gigapascals and 1573 to 2173 kelvin. The average grain size (G) was fitted to the rate equation, and the grain growth rates of perovskite and periclase were G10.6 = 1 x 10(-57.4) t exp(-320.8/RT) and G10.8 = 1 x 10(-62.3) t exp(-247.0/RT), respectively, where t is the time, R is the gas constant, and T is the absolute temperature. These growth rates provide insight into the mechanism for grain growth in minerals relevant to the Earth's lower mantle that will ultimately help define the rheology of the lower mantle.     

Earth's Core-Mantle Boundary: Results of Experiments at High Pressures and Temperatures

Laboratory experiments document that liquid iron reacts chemically with silicates at high pressures (>/=2.4 x 10(10) Pascals) and temperatures. In particular, (Mg,Fe)SiO(3) perovskite, the most abundant mineral of Earth's lower mantle, is expected to react with liquid iron to produce metallic alloys (FeO and FeSi) and nonmetallic silicates (SiO(2) stishovite and MgSiO(3) perovskite) at the pressures of the core-mantle boundary, 14 x 10(10) Pascals. The experimental observations, in conjunction with seismological data, suggest that the lowermost 200 to 300 kilometers of Earth's mantle, the D" layer, may be an extremely heterogeneous region as a result of chemical reactions between the silicate mantle and the liquid iron alloy of Earth's core. The combined thermal-chemical-electrical boundary layer resulting from such reactions offers a plausible explanation for the complex behavior of seismic waves near the core-mantle boundary and could influence Earth's magnetic field observed at the surface.     

Electronic transitions in perovskite: possible nonconvecting layers in the lower mantle

We measured the spin state of iron in magnesium silicate perovskite (Mg(0.9),Fe(0.1))SiO(3) at high pressure and found two electronic transitions occurring at 70 gigapascals and at 120 gigapascals, corresponding to partial and full electron pairing in iron, respectively. The proportion of iron in the low spin state thus grows with depth, increasing the transparency of the mantle in the infrared region, with a maximum at pressures consistent with the D" layer above the core-mantle boundary. The resulting increase in radiative thermal conductivity suggests the existence of nonconvecting layers in the lowermost mantle.     

Precision Lattice-Parameter Determination of (Mg,Fe)SiO3 Tetragonal Garnets

The tetragonal garnet (Mg,Fe)SiO(3) is a high-pressure phase of pyroxene that is thought to be a major constituent of the earth's upper mantle. Its crystal structure is similar to that of cubic garnet, but it is slightly distorted to tetragonal symmetry so that its x-ray powder diffraction pattern shows a very small line splitting. A suite of tetragonal garnets with different compositions in the MgSiO(3)-rich portion of the MgSiO(3)-FeSiO(3) system was synthesized at about 20 gigapascals and 2000 degrees C. The lattice parameters a and c of quenched samples were determined by whole-powder-pattern decomposition analysis of Fe Kalpha x-ray powder diffraction data, which has the capacity to resolve to a high degree heavily overlapping reflections. It was found that the lattice parameters can be obtained from the following equations; a (in angstroms) = 11.516 + 0.088x and c (in angstroms) = 11.428 + 0.157x, where x, teh mole fraction of FeSiO(3), is 0.0 相似文献   

Slip systems in MgSiO3 post-perovskite: implications for D' anisotropy

Understanding deformation of mineral phases in the lowermost mantle is important for interpreting seismic anisotropy in Earth's interior. Recently, there has been considerable controversy regarding deformation-induced slip in MgSiO(3) post-perovskite. Here, we observe that (001) lattice planes are oriented at high angles to the compression direction immediately after transformation and before deformation. Upon compression from 148 gigapascals (GPa) to 185 GPa, this preferred orientation more than doubles in strength, implying slip on (001) lattice planes. This contrasts with a previous experiment that recorded preferred orientation likely generated during the phase transformation rather than deformation. If we use our results to model deformation and anisotropy development in the D' region of the lower mantle, shear-wave splitting (characterized by fast horizontally polarized shear waves) is consistent with seismic observations.     

Thermal equation of state of aluminum-enriched silicate perovskite

Inferences of the chemical homogeneity of Earth's mantle depend on comparing laboratory-derived equations of state of mantle phases with seismically determined properties of the material in situ. A uniform chemical composition of the entire mantle has been found to be consistent with measurements, to date, of these properties for the end-member MgSiO3 perovskite phase. New pressure-volume-temperature data for silicate perovskite containing 5 mole percent Al2O3 has yielded different values of the equation of state parameters, with the bulk modulus being significantly smaller at lower mantle conditions than for aluminum-free perovskite, thus requiring adjustments in other components to match seismic observations.     

Melting of (Mg,Fe)2SiO4 at the Core-Mantle Boundary of the Earth

The lower mantle of the Earth is believed to be largely composed of (Mg,Fe)O (magnesiowustite) and (Mg,Fe)SiO3 (perovskite). Radiative temperatures of single-crystal olivine [(Mg0.9,Fe0.1)2SiO4] decreased abruptly from 7040 +/- 315 to 4300 +/- 270 kelvin upon shock compression above 80 gigapascals. The data indicate that an upper bound to the solidus of the magnesiowustite and perovskite assemblage at 4300 +/- 270 kelvin is 130 +/- 3 gigapascals. These conditions correspond to those for partial melting at the base of the mantle, as has been suggested occurs within the ultralow-velocity zone beneath the central Pacific.     

Synchrotron Infrared Absorbance Measurements of Hydrogen in MgSiO3 Perovskite

Micro-infrared spectroscopic measurements on single crystals of MgSiO(3) perovskite document two pleochroic hydroxyl absorbance peaks at 3483 and 3423 centimeter(-1). These measurements were obtained with the use of a synchrotron infrared source for spectroscopy. These data are consistent with a trace hydrogen content of 700 +/- 170 hydrogen atoms per 10(6) silicon atoms in the nominally anhydrous MgSiO(3) perovskite. When integrated over the volume of the lower mantle, this concentration is comparable to 12 percent of the mass of hydrogen in the Earth's hydrosphere.