Upland rice breeding in Brazil: a simultaneous genotypic evaluation of stability, adaptability and grain yield

A durum wheat recombinant inbred line population developed from PDW 233 × Bhalegaon 4 cross was analyzed in five environments to understand the genetic network responsible for test weight (TW), thousand kernel weight (TKW), grain yield (YLD), spike length (SL), spikelets per spike (SPS), kernels per spike (KER) and kernel weight per spike (KWS). Genotype, environment and their interactions were main sources of variance for all the traits. TW and TKW were influenced by 11 main effect QTL and 6 digenic epistatic interactions detected on chromosomes 2A, 2B, 4B and 7A. Grain yield was influenced by three epistatic interactions and five main effect QTL, of which two on chromosome 2A were most consistent. A major QTL for spike length was observed on chromosome 3B. QTL for spike characters were distributed over 9 chromosomes. All the traits showed significant influence of digenic epistasis (QQ) and, to a certain extent, QTL × environment interactions (QQE). Therefore, while breeding for complex traits like kernel characters and grain yield components, these interactions should also be considered important. The consistent QTL on chromosome 2A between the marker interval Xgwm71.2–Xubc835.4 with pleiotropic effect on TW and TKW, may be utilized in early generation selection to improve TW and TKW and thereby the milling potential of the durum wheat.     

QTL associated with heat susceptibility index in wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis> L.) under short-term reproductive stage heat stress

Heat stress adversely affects wheat production in many regions of the world and is particularly detrimental during reproductive development and grain-filling. The objective of this study was to identify quantitative trait loci (QTL) associated with heat susceptibility index (HSI) of yield components in response to a short-term heat shock during early grain-filling in wheat. The HSI was used as an indicator of yield stability and a proxy for heat tolerance. A recombinant inbred line (RIL) population derived from the heat tolerant cultivar ‘Halberd’ and heat sensitive cultivar ‘Cutter’ was evaluated for heat tolerance over 2 years in a controlled environment. The RILs and parental lines were grown in the greenhouse and at 10 days after pollination (DAP) half the plants for each RIL received a three-day heat stress treatment at 38°C/18°C day/night, while half were kept at control conditions of 20°C/18°C day/night. At maturity, the main spike was harvested and used to determine yield components. A significant treatment effect was observed for most yield components and a HSI was calculated for individual components and used for QTL mapping. QTL analysis identified 15 and 12 QTL associated with HSI in 2005 and 2006, respectively. Five QTL regions were detected in both years, including QTL on chromosomes 1A, 2A, 2B, and 3B. These same regions were commonly associated with QTL for flag leaf length, width, and visual wax content, but not with days to flowering. Pleiotropic trade-offs between the maintenance of kernel number versus increasing single kernel weight under heat stress were present at some QTL regions. The results of this study validate the use of the main spike for detection of QTL for heat tolerance and identify genomic regions associated with improved heat tolerance that can be targeted for future studies.     

Mapping QTLs for salt tolerance with additive,epistatic and QTL × treatment interaction effects at seedling stage in wheat

Quantitative trait loci (QTLs) for salt tolerance with additive, epistatic and QTL × treatment interaction effects at seedling stage in wheat were identified. A set of 131 recombinant inbred lines derived from cross Chuan 35050 × Shannong 483 were evaluated under salt stress and normal conditions. Wide variation was found for all studied traits. A total of 18 additive and 16 epistatic QTLs were detected, among which five and 11 were with significant QTL × treatment effects. Ten QTL clusters were identified, and each may represent a single gene or closely linked genes. The locus controlling shoot K⁺/Na⁺ concentration ratio and shoot Na⁺ concentration on chromosome 5A may be identical to Nax2. The interval Xgwm6‐Xgwm538 on chromosome 4B for total dry weight was also identified in a previous study, both near the marker Xgwm6. The marker Xgwm6 may be useful for marker‐assisted selection. Six pairs of homoeologous QTLs were detected, showing synteny among the A, B and D genomes. These results facilitate understanding the mechanisms and the genetic basis of salt tolerance in wheat.     

利用RIL群体分析HMW-GS对小麦品质性状的量化效应

利用重组自交系群体——RIL-8群体的131个系及其亲本为材料,分析了高分子量麦谷蛋白亚基及亚基组合对10个小麦品质性状的量化效应及其差异。结果表明,RIL-8群体Glu-A1、Glu-B1、Glu-D1位点编码的亚基分别为 1、N,7+9、7+8和5+10、2+12,主要存在7种亚基组合类型。同一位点不同亚基对面粉吸水率、Zeleny沉淀值、面团形成时     

粒重基因TaCwi-A1等位变异在黄淮麦区小麦品种(系)中的分布及功能分析

为探讨小麦粒重基因TaCwi-A1等位变异TaCwi-A1a和TaCwi-A1b在育种实践中的应用价值,首先利用TaCwi-A1功能标记对539份黄淮麦区小麦品种(系)进行分子检测,确定各供试材料的等位变异类型,从而获得TaCwi-A1a和TaCwi-A1b 2种等位变异的分布频率。对审定品种、参加区试品系以及自育品系进行了千粒质量(3个不同生长环境)及粒长、粒宽和籽粒面积(1个生长环境)测试分析,比较TaCwi-A1a和TaCwi-A1b等位变异籽粒表型性状的差异性。结果表明,在539份黄淮麦区小麦资源中TaCwi-A1a的分布频率为65.03%,TaCwi-A1b的分布频率为34.97%,TaCwi-A1a的分布频率明显高于TaCwi-A1b。籽粒表型性状分析表明,无论是审定品种,还是参加区试品系和自育品系,在3个生长环境下,TaCwi-A1a基因型材料的千粒质量均值都显著高于TaCwi-A1b;TaCwi-A1a基因型材料的粒长和粒宽均显著高于TaCwi-A1b。进一步验证了TaCwi-A1a等位变异的籽粒表型性状增效功能,说明其对粒重及其构成要素是优异的等位变异。此外,本研究鉴定了黄淮麦区中TaCwi-A1等位变异的分布情况,为亲本选配提供了参考。     

Molecular mapping of quantitative trait loci for domestication traits and β-glucan content in a wheat recombinant inbred line population

Genetic maps are useful for analysis of quantitative trait loci (QTLs) and for marker-assisted selection (MAS) in breeding. A simple sequence repeat (SSR) marker linkage map of common wheat was constructed based on recombination inbred lines (RILs) derived from a cross between Chinese Spring and spelt wheat. The map included 264 loci on all wheat chromosomes covering 2,345.2 cM with 962, 794.6, and 588.6 cM for the A, B, and D genomes, respectively. Using the RILs and the map, we detected 42 putative QTLs on 15 chromosomes for ear length, spikelet number, spike compactness, kernel length, kernel width, kernel height and β-glucan content. Each QTL explained 4–45% of the phenotypic variation. Five QTL cluster regions were detected on chromosomes 1A, 5AL, 2B, 2D, and 4D. The first QTLs for β-glucan content in wheat were identified on chromosomes 3A, 1B, 5B, and 6D.     

Molecular mapping of quantitative trait loci determining resistance to septoria tritici blotch caused by Mycosphaerella graminicola in wheat

A set of 65 recombinant inbred lines of the ‘International Triticeae Mapping Initiative’ mapping population (‘W7984’בOpata 85’) was analysed for resistance to septoria tritici blotch at the seedling and adult plant stages. The mapping population was inoculated with two Argentinean isolates (IPO 92067 and IPO 93014). At the seedling stage, three loci were discovered on the short arms of chromosomes 1D, 2D and 6B. All three loci were detected with both isolates. At the adult plant stage, two isolate-specific QTL were found. The loci specific for isolates IPO 92067 and IPO 93014 were mapped on the long arms of chromosomes 3D and 7B, respectively. This revised version was published online in August 2006 with corrections to the Cover Date.     

QTL for flag leaf size and their influence on yield-related traits in wheat

Flag leaf-related traits (FLRTs) are determinant traits affecting plant architecture and yield potential in wheat (Triticum aestivum L.). In this study, three related recombinant inbred line (RIL) populations with a common female parent were developed to identify quantitative trait loci (QTL) for flag leaf width (FLW), length (FLL), and area (FLA) in four environments. A total of 31 QTL were detected in four environments. Two QTL for FLL on chromosomes 3B and 4A (QFll-3B and QFll-4A) and one for FLW on chromosome 2A (QFlw-2A) were major stable QTL. Ten QTL clusters (C1–C10) simultaneously controlling FLRTs and yield-related traits (YRTs) were identified. To investigate the genetic relationship between FLRTs and YRTs, correlation analysis was conducted. FLRTs were found to be positively correlated with YRTs especially with kernel weight per spike and kernel number per spike in all the three RIL populations and negatively correlated with spike number per plant. Appropriate flag leaf size could benefit the formation of high yield potential. This study laid a genetic foundation for improving yield potential in wheat molecular breeding programs.     

Mapping QTL for seed yield and canning quality following processing of black bean (<Emphasis Type="Italic">Phaseolus vulgaris</Emphasis> L.)

Quantitative trait loci (QTL) analysis was conducted to identify QTL for seed yield and color retention following processing of a recombinant inbred line (RIL) black bean population. A population of 96 RILs were derived from the cross of black bean cultivars ‘Jaguar’ and 115M and evaluated in replicated trials at one location over 4 years (2004–2007) in Michigan. A 119-point genetic map constructed using simple sequence repeat (SSR), sequence related amplified polymorphism (SRAP), target region amplified polymorphism (TRAP) and phenotypic markers spanned fifteen linkage groups (LG) or 460 cM of the bean genome. Fourteen QTL for yield and color retention in four environments were identified by composite interval mapping on six linkage groups. A major QTL SY10.2^J115 for seed yield was identified on LG B10 with additional QTL on B3, B5, and B11. Color retention following processing was associated with loci on B1, B3, B5, B8, and B11. 115M possessed positive alleles for yield, but negative alleles for color retention. Some QTL for yield and color retention co-localized with regions identified in previous studies while others, particularly for color retention, were unique. Additional QTL for agronomic and canning quality traits were detected and individual contributions to future black bean breeding are discussed.     

Genetic loci linking improved heat tolerance in wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis> L.) to lower leaf and spike temperatures under controlled conditions

Heat stress adversely affects wheat production in many regions of the world and is particularly detrimental during reproductive development. The objective of this study was to identify novel quantitative trait loci (QTL) associated with improved heat tolerance in wheat (Triticum aestivum L.) and to confirm previous QTL results. To accomplish this, a recombinant inbred line (RIL) population was subjected to a three-day 38°C daytime heat stress treatment during early grain-filling. At maturity, a heat susceptibility index (HSI) was calculated from the reduction of three main spike yield components; kernel number, total kernel weight, and single kernel weight. The HSI, as well as temperature depression (TD) of the main spike and main flag leaf during heat stress were used as phenotypic measures of heat tolerance. QTL analysis identified 14 QTL for HSI, with individual QTL explaining from 4.5 to 19.3% of the phenotypic variance. Seven of these QTL co-localized for both TD and HSI. At all seven loci, the allele for a cooler flag leaf or spike temperature (up to 0.81°C) was associated with greater heat tolerance, indicated by a lower HSI. In a comparison to previous QTL results in a RIL population utilizing the same source of heat tolerance, seven genome regions for heat tolerance were consistently detected across populations. The genetic effect of combining three of these QTL, located on chromosomes 1B, 5A, and 6D, demonstrate the potential benefit of selecting for multiple heat tolerance alleles simultaneously. The genome regions identified in this study serve as potential target regions for fine-mapping and development of molecular markers for more rapid development of heat tolerant germplasm.     

QTL for yield, yield components and canopy temperature depression in wheat under late sown field conditions

A wheat (Triticum aestivum L.) recombinant inbred line (RIL) population was used to identify quantitative trait loci (QTL) associated with yield, yield components, and canopy temperature depression (CTD) under field conditions. The RIL population, consisting of 118 lines derived from a cross between the stress tolerant cultivar ‘Halberd’ and heat stress sensitive cultivar ‘Karl92’, was grown under optimal and late sown conditions to impose heat stress. Yield and yield components including biomass, spikes m^?2, thousand kernel weight, kernel weight and kernel number per spike, as well as single kernel characteristics were determined. In addition, CTD was measured during both moderate (32–33 °C) and extreme heat stress (36–37 °C) during grain-filling. Yield traits showed moderate to high heritability across environments with a large percentage of the variance explained by genetic effects. Composite interval mapping detected 25 stable QTL for the 15 traits measured, with the amount of phenotypic variation explained by individual QTL ranging from 3.5 to 27.1 %. Two QTL for both yield and CTD were co-localized on chromosomes 3BL and 5DL and were independent of phenological QTL. At both loci, the allele from Halberd was associated with both higher yield and a cooler crop canopy. The QTL on 3BL was also pleiotropic for biomass, spikes m^?2, and heat susceptibility index. This region as well as other QTL identified in this study may serve as potential targets for fine mapping and marker assisted selection for improving yield potential and stress adaptation of wheat.     

Quantitative trait loci for resistance to Fusarium head blight in recombinant inbred wheat lines from the cross Huapei 57-2 / Patterson

Fusarium head blight (FHB), primarily caused by Fusarium graminearum in North America, often results in significant losses in yield and grain quality of wheat (Triticum aestivum L.). Evaluation of FHB resistance is laborious and can be affected by environmental conditions. The development of DNA markers associated with FHB quantitative trait loci (QTL) and their use in breeding programs could greatly enhance selection. The objective of this study was to identify the location and effect of QTLs for FHB resistance using simple sequence repeat (SSR) markers. A population of wheat recombinant inbred lines derived from the cross ‘Huapei57-2’/‘Patterson’ was characterized for type II resistance in one field experiment and two tests under controlled conditions in the greenhouse. Bulked segregant analysis followed by QTL mapping was used to identify the major segregating QTLs. Results indicate that ‘Huapei 57-2’ may have the same resistance allele as ‘Sumai3’ at a QTL located on the short arm of chromosome 3B. Other QTLs of lower effect size were identified on the long arm of 3Band on chromosomes 3A and 5B. Our findings along with results from other studies demonstrate that the effect of the QTL on3BS is large and consistent across a wide range of genetic backgrounds and environments. Pyramiding this QTL with other FHB QTLs using marker-assisted selection should be effective in improving FHB resistance in a wheat breeding program. This revised version was published online in August 2006 with corrections to the Cover Date.     

燕大1817/北农6号重组自交系群体穗部性状的QTL定位

小麦穗部性状与单株产量密切相关。本研究以小麦骨干亲本燕大1817与优良品系北农6号衍生的269个重组自交系为材料,通过在北京和河北石家庄的2年田间试验数据,利用本实验室已构建的高密度SNP和SSR遗传连锁图谱进行穗长、穗粒数和穗粒重QTL定位。采用完备复合区间作图法共检测到29个穗部性状加性效应QTL,其中10个穗长QTL分布于1B、2D、3A、3B、4A、5A、5B、6A和7D染色体上,解释的表型变异率为2.96%~9.63%,QSl.cau-4A.2在所有5个环境中均能被检测到,解释的表型变异为5.89%~9.62%,另有7个QTL能在2个或2个以上环境中被检测到;8个穗粒数相关QTL分布于1A、3A、3D、4A和5B染色体上,解释的表型变异为4.06%~11.17%,为单个环境QTL。11个与穗粒重相关QTL分布于1A、1B、2A、2D、3A、4D、5A、5B和6B染色体上,解释的表型变异为2.79%~16.12%,其中QGws.cau-1B、QGws.cau-3A和QGws.cau-6B.2在2个或者2个以上环境中能被检测到。另外,鉴定出6个分布于1A、2D、3A、4A和5B染色体上的QTL富集区段。     

QTL analysis for grain weight in common wheat

Quantitative trait loci (QTL) analysis for grain weight (GW = 1000 grain weight) in common wheat was conducted using a set of 100 recombinant inbred lines (RILs) derived from a cross ‘Rye Selection 111 (high GW) × Chinese Spring (low GW)’. The RILs and their two parental genotypes were evaluated for GW in six different environments (three locations × two years). Genotyping of RILs was carried out using 449 (30 SSRs, 299 AFLP and 120 SAMPL) polymorphic markers. Using the genotyping data of RILs, framework linkage maps were prepared for three chromosomes (1A, 2B, 7A), which were earlier identified by us to carry important/major genes for GW following monosomic analysis. QTL analysis for GW was conducted following genome-wide single marker regression analysis (SMA) and composite interval mapping (CIM) using molecular maps for the three chromosomes. Following SMA, 12 markers showed associations with GW, individual markers explaining 6.57% to 10.76% PV (phenotypic variation) for GW in individual environments. The high grain weight parent, Rye Selection111, which is an agronomically superior genotype, contributed favourable alleles for GW at six of the 12 marker loci identified through SMA. The CIM identified two stable and definitive QTLs, one each on chromosome arms 2BS and 7AS, which were also identified through SMA, and a third suggestive QTL on 1AS. These QTLs explained 9.06% to 19.85% PV for GW in different environments. The QTL for GW on 7AS is co-located with a QTL for heading date suggesting the occurrence of a QTL having a positive pleiotropic effect on the two traits. Some of the markers identified during the present study may prove useful for marker-assisted selection, while breeding for high GW in common wheat.     

Mapping QTL for stay-green and agronomic traits in wheat under diverse water regimes

Wheat (Triticum aestivum L.) yield is directly proportional to physio-morphological traits. A high-density genetic map consisting of 2575 markers was used for mapping QTL controlling stay-green and agronomic traits in wheat grown under four diverse water regimes. A total of 108 additive QTL were identified in target traits. Among them, 28 QTL for chlorophyll content (CC) were detected on 11 chromosomes, 43 for normalized difference vegetation index (NDVI) on all chromosomes except 5B, 5D, and 7D, five for spikes per plant (NSP) on different chromosomes, nine for plant height (PH) on four chromosomes, and 23 for thousand-kernel weight (TKW) on 11 chromosomes. Considering all traits, the phenotypic variation explained (PVE) ranged from 3.61 to 41.62%. A major QTL, QNDVI.cgb-5A.7, for NDVI with a maximum PVE of 20.21%, was located on chromosome 5A. A stable and major PH QTL was observed on chromosome 4D with a PVE close to 40%. Most distances between QTL and corresponding flanking markers were less than 1 cM, and approximately one-third of the QTL coincided with markers. Each of 16 QTL clusters on 10 chromosomes controlled more than one trait and therefore could be regarded as pleiotropic regions in response to different water regimes. Forty-one epistatic QTL were identified for all traits having PVE of 6.00 to 25.07%. Validated QTL closely linked to flanking markers will be beneficial for marker-assisted selection in improving drought-tolerance in wheat.     

Dissection of the genetic architecture for grain quality‐related traits in three RIL populations of maize (Zea mays L.)

To manipulate the composition of the maize kernel to meet future needs, an understanding of the molecular regulation of kernel quality‐related traits is required. In this study, the quantitative trait loci (QTL) for the concentrations of grain protein, starch and oil were identified using three sets of RIL populations in three environments. The genetic maps and the initial QTL were integrated using meta‐analyses. A total of 38 QTL were identified, including 15 in population 1, 12 in population 2 and 11 in population 3. The individual effects ranged from 2.87% to 13.11% of the phenotypic variation, with seven QTL each contributing over 10%. One common QTL was found for the concentrations of grain protein and starch in bin 3.09 in the three environments and the three RIL populations. Of the 38 initial QTL, 22 were integrated into eight mQTL by meta‐analysis. mQTL3 and mQTL8 of the key mQTL in which the initial QTL displayed R² > 10% included six and three initial QTL for grain protein and starch concentrations from two or three populations, respectively. These results will provide useful information for marker‐assisted selection to improve the quality of the maize kernel.     

Analysis of contributors to grain yield in wheat at the individual quantitative trait locus level

In wheat, strong genetic correlations have been found between grain yield (GY) and tiller number per plant (TN), fertile spikelet number per spike (FSN), kernel number per spike (KN) and thousand‐kernel weight (TKW). To investigate their genetic relationships at the individual quantitative trait locus (QTL) level, we performed both normal and multivariate conditional QTL analysis based on two recombinant inbred lines (RILs) populations. A total of 79 and 48 normal QTLs were identified in the International Triticeae Mapping Initiative (ITMI)/SHW‐L1 × Chuanmai 32 (SC) populations, respectively, as well as 55 and 35 conditional QTLs. Thirty‐two QTL clusters in the ITMI population and 18 QTL clusters in the SC population explained 0.9%–46.2% of phenotypic variance for two to eight traits. A comparison between the normal and conditional QTL mapping analyses indicated that FSN made the smallest contribution to GY among the four GY components that were considered at the QTL level. The effects of TN, KN and TKW on GY were stronger at the QTL level.     

Quantitative trait loci mapping for yield components and kernel-related traits in multiple connected RIL populations in maize

Grain yield is one of the most important and complex quantitative traits in maize breeding. In the present study, a total of 11 connected RIL populations, derived from crosses between elite inbreed “Huangzaosi” as the common parent and 11 elite inbreeds, were evaluated for five yield components and kernel-related traits under six environments. Quantitative trait loci (QTL) were detected for the traits under each environment and in joint analysis across all environments for each population. A total of 146 major QTL with R² > 10 % in at least one environment and also detected based on joint analysis across all environments were identified in the 11 populations. Lqkwei4 conferring kernel weight and Lqklen4-1 conferring kernel length both located in the adjacent marker intervals in bin 4.05 were stably expressed in four environments and in joint analysis across six environments, with the largest R² over 27 and 24 % in a single environment, respectively. Moreover, all major QTL detected in the 11 populations were aligned on the IBM2 2008 neighbors reference map. Totally 16 common QTL (CQTL) were detected. Seven important CQTL (CQTL1-2, CQTL1-3, CQTL4-1, CQTL4-2, CQTL4-3, CQTL4-4, and CQTL6-1) were located in bin 1.07, 1.10, 4.03, 4.05, 4.08, 4.09 and 6.01–6.02, respectively. These chromosomal regions could be targets for fine mapping and marker-assisted selection.     

Phenotypic and QTL analyses of herbage production-related traits in perennial ryegrass (<Emphasis Type="Italic">Lolium perenne</Emphasis> L.)

Phenotypic and genetic evaluation of morphological traits associated with herbage biomass production was undertaken in a perennial ryegrass (Lolium perenne L.) biparental F₁ mapping population (n = 200) with parent plants from cultivars ‘Grasslands Impact’ and ‘Grasslands Samson’. Morphological traits measured on three clonal replicates of the parental genotypes and 200 F₁ progeny in a glasshouse in two separate trials (autumn and spring) included: dry weight (DW), leaf elongation rate (LER), initial tiller number (TNs), final tiller number (TNe), site filling (Fs), tiller weight (TW), leaf lamina length, leaf tip and ligule appearance rates (ALf, ALg) and leaf elongation duration (LED). Principal component analysis of patterns of trait association identified negative correlation between TNs or TNe, and TW as the primary basis for morphological difference and indicated that either high LER or long LED could reduce TN. Plants with higher LER tended to have increased DW. Quantitative trait loci (QTL) were detected on all seven linkage groups (LG) of a perennial ryegrass linkage map for all but three traits. A total of 61 QTL were identified, many of which clustered at 15 shared genome locations. Significant genotype by environment effects were encountered, evidenced both by variation between experiments in genotype rankings and by a general lack of commonality for QTL for the same traits in the different experiments. Only five QTL, for ALf, ALg and TN, were conserved between autumn and spring trials. A QTL for TN and DW on LG6 is a strong candidate for application of MAS in future plant improvement work and was found to be co-linear with QTL for equivalent traits reported on chromosome 2 in rice.     

小麦重组自交系群体HMW-GS的检测与分析

利用重组自交系群体--RILL-8群体的131个系为材料,检测和分析了其高分子量麦谷蛋白亚基及亚基组合.结果表明,RIL-8群体Glu-A1、Glu-B1、Glu-D1位点编码的亚基分别为1、N,7 9、7 8和5 10、2 12,主要存在7种亚基组合类型.不同亚基及亚基组合类型在相同位点上仅存在1对等位基因差异,可以用其进行相同位点不同亚基及亚基组合对品质性状效应值的估算.