Physical stability of shikonin derivatives from the roots of Lithospermum erythrorhizon cultivated in Korea.

Five red shikonin pigments, deoxyshikonin, shikonin, acetylshikonin, isobutylshikonin, and beta-hydroxyisovalerylshikonin, were isolated from the roots of Lithospermum erythrorhizon cultivated in Korea. The purified pigments were red, purple, and blue at acidic, neutral, and alkaline pH values, respectively. Physical stability of the purified pigments against heat and light in an aqueous solution was examined for possible value-added food colorants. The thermal degradation reactions were carried out at pH 3.0 (50 mM glycine buffer) in 50% EtOH/H(2)O. Deoxyshikonin (t(1/2) = 14.6 h, 60 degrees C) and isobutylshikinin (t(1/2) = 19.3 h, 60 degrees C) are relatively less stable than other shikonin derivatives (t(1/2) = 40-50 h, 60 degrees C). Activation energies of thermal degradation of the isolated pigments were calculated. The activation energy of deoxyshikonin was the highest (12.5 kcal mol(-)(1)) and that of beta-hydroxyisovalerylshikonin was the lowest (1.71 kcal mol(-)(1)) value. Light stabilities of the pigments were similar to each other in that the half-life values of photodegradation for 20000 lx light intensity were 4.2-5.1 h.     

In vitro stability and chemical reactivity of thiosulfinates

A model reaction system was used to generate pure thiosulfinates (3) from S-alk(en)yl-L-cysteine sulfoxides (1) to facilitate studies on the intrinsic pH and thermal sensitivities of individual thiosulfinate species. Thiosulfinate decay could be characterized as first-order processes over the pH range of 1.2-9.0 and at 20-80 degrees C. The stability of thiosulfinates was greatest at pH 4.5-5.5, followed by pH 1.2, pH 6.5-7.5, and pH 8.0-9.0. Thiosulfinates with longer and saturated alk(en)yl groups were generally more stable than those with shorter and unsaturated alk(en)yl groups. Thiosulfinates underwent thioalkyl-exchange reactions at pH 8-9 without loss of total thiosulfinate levels within 60-90 min at 20 degrees C.     

Isolation and characterization of water-soluble intermediates of blue pigments transformed from geniposide of Gardenia jasminoides

Gardenia blue dye was obtained through the reaction of methylamine with genipin, the aglycone of geniposide isolated from the fruits of Gardenia jasminoides. The resulting blue pigments were passed through Bio-Gel P-2 resin yielding five fractions, GM1-GM5. Four fractions (GM1-GM4) were all blue pigments, and the first eluted higher molecular weight fraction GM1 had a higher tinctorial strength than the later eluted lower molecular weight fractions, GM2-GM4. The last eluted GM5 fraction with lambda(max) of 292 nm was colorless and was confirmed as the true intermediate of the blue pigments on the basis of UV-vis spectrophotometric evidence. The GM5 fraction was composed of two epimeric isomers, and their structures were characterized by (1)H NMR, (1)H-(1)H COSY, (13)C NMR, and HMQC and HMBC spectral measurements.     

Heat stability of zearalenone in an aqueous buffered model system

Zearalenone is an endocrine disruptor with estrogenic activity, produced primarily by Fusarium graminearum, a common cause of corn ear rot and Fusarium head blight or scab in wheat. Zearalenone can be a contaminant of both corn and wheat and may survive thermal food processes. This study was done to determine the heat stability of zearalenone. Reduction of zearalenone was measured during heating at different temperatures (100, 125, 150, 175, 200, and 225 degrees C) in an aqueous buffer solution at different pH values. The rate and extent of zearalenone reduction increased with processing temperature. Less than 23% of zearalenone was lost when heated to /=175 degrees C, and complete reduction of zearalenone was observed in less than 30 min at 225 degrees C, regardless of pH. Overall, zearalenone was most stable at pH 7 followed by that at pH 4 and 10, and the greatest losses occurred above 175 degrees C.     

Kinetics and hydrolysis of fenamiphos, fipronil, and trifluralin in aqueous buffer solutions.

Hydrolyses of fenamiphos, fipronil, and trifluralin were studied in aqueous buffer solutions of pH 4.1, 7.1, and 9.1 at different temperatures, 5, 22 +/- 1, 32 +/- 1, and 50 +/- 1 degrees C. Fenamiphos, fipronil, and trifluralin were found to be more stable in acidic and neutral buffer solutions at temperatures of 5 and 22 +/- 1, and dissipation is rapid at 50 +/- 1 degrees C. In basic buffer and at higher temperature, degradation of fenamiphos was found to be very rapid when compared with fipronil and trifluralin. The rate constants calculated at 32 degrees C for fenamiphos were 2349.4 x 10(-)(8) (pH 4.1), 225.2 x 10(-)(8) (pH 7.1), and 30476.0 x 10(-)(8) (pH 9.1); for fipronil 1750.0 x 10(-)(8) (pH 4.1), 3103.0 x 10(-)(8) (pH 7.1), and 3883.0 x 10(-)(8) (pH 9.1); and for trifluralin 2331.0 x 10(-)(8) (pH 4.1), 2360.0 x 10(-)(8) (pH 7.1), and 3188.0 x 10(-)(8) (pH 9.1). On the basis of rate constant values, these pesticides appeared to be more susceptible to hydrolysis than synthetic organophosphorus compounds such as chlorpyriphos, diazinon, malathion, and ronnel. DT(50) values calculated at 32 degrees C were 228 (pH 4.1), 5310.24 (pH 7.1), and 37.68 (pH 9.1) h for fenamiphos; 608.6 (pH 4.1), 373.9 (pH 7.1), and 270.2 (pH 9.1) h for fipronil; and 502.1 (pH 4.1), 496.8 (pH 7.1), and 355.7 (pH 9.1) h for trifluralin.     

Purification and thermal and high-pressure inactivation of pectinmethylesterase isoenzymes from tomatoes (Lycopersicon esculentum): a novel pressure labile isoenzyme

Tomato pectinmethylesterase (PME) was successfully purified by a two-step method consisting of affinity chromatography followed by cation exchange chromatography. According to this procedure, four different isoenzymes were identified representing molar masses around 34.5-35.0 kDa. Thermal and high-pressure inactivation kinetics of the two major isoenzymes of tomato PME were studied. A striking difference between their process stability was found. The thermostable isoenzyme was completely inactivated after 5.0 min at 70 degrees C, whereas for the thermolabile isoenzyme, temperatures at around 60 degrees C were sufficient for complete inactivation. The thermostable isoenzyme was also found to be pressure stable since no inactivation was observed after 5.0 min of treatment at 800 MPa and 20 or 40 degrees C. The thermolabile isoenzyme appeared to be pressure labile since it could be completely inactivated after 5.0 min of treatment at 700 MPa and 20 degrees C or 650 MPa and 40 degrees C. Inactivation kinetics at pH 6.0 could be accurately described by a first-order model.     

Conformational states of sunflower (Helianthus annuus) Helianthinin: effect of heat and pH

The structure and solubility of helianthinin, the most abundant protein of sunflower seeds, was investigated as a function of pH and temperature. Dissociation of the 11S form (hexamer) into the 7S form (trimer) gradually increased with increasing pH from 5.8 to 9.0. High ionic strength (I = 250 mM) stabilizes the 11S form at pH > 7.0. Heating and low pH resulted in dissociation into the monomeric constituents (2-3S). Next, the 7S and 11S forms of helianthinin were isolated and shown to differ in their secondary and tertiary structure, and to have denaturation temperatures (T(d)) of 65 and 90 degrees C, respectively. Furthermore, the existence of two populations of the monomeric form of helianthinin with denaturation temperatures of 65 and 90 degrees C was described. This leads to the hypothesis that helianthinin can adopt two different conformational states: one with T(d) = 65 degrees C and a second with T(d) = 90 degrees C.     

Spectrophotometric determination of some benzene sulfonamides with 7,7,8,8-tetracyanoquinodimethane

A new spectrophotometric method for the determination of some unsubstituted benzene sulfonamides is presented. The method is based on the interaction of these derivatives with 7,7,8,8-tetracyanoquinodimethane at pH 9.0-9.5 to produce intense blue products. The quantitation of the products was carried out at 578 nm. Beer's law was obeyed over a wide range of concentrations for all sulfonamide compounds studied. Optimum analytical conditions were determined, and the color produced was stable for at least 90 min at 25 degrees C. Analytical data for determination of sulfonamide compounds in pure form are presented together with application of the proposed method for analysis of some commercially available pharmaceutical preparations. The results are in good agreement with those obtained by official procedures.     

Chemical stability and colorant properties of betaxanthin pigments from Celosia argentea

The chemical stability and colorant properties of three betaxanthins recently identified from Celosia argentea varieties were evaluated. Lyophilized betaxanthin powders from yellow inflorescences of Celosia exhibited bright yellow color and high color purity with strong hygroscopicity. The aqueous solutions containing these betaxanthins were bright yellow in the pH range 2.2-7.0, and they were most stable at pH 5.5. The betaxanthins in a model system (buffer) were susceptible to heat, and found to be as unstable as red betacyanins (betanin and amaranthine) at high temperatures (>40 degrees C), but more stable at 40 degrees C with the exclusion of light and air. The three betaxanthins had slightly higher pigment retention than amaranthine/isoamaranthine in crude extracts at 22 degrees C, as verified by HPLC analysis. Lyophilized betaxanthins had much better storage stability (mean 95.0% pigment retention) than corresponding aqueous solutions (14.8%) at 22 degrees C after 20 weeks. Refrigeration (4 degrees C) significantly increased pigment retention of aqueous betaxanthins to 75.5%.     

Polyphenol oxidase from yacon roots (Smallanthus sonchifolius)

Polyphenol oxidase (E.C. 1.14.18.1) (PPO) extracted from yacon roots (Smallanthus sonchifolius) was partially purified by ammonium sulfate fractionation and separation on Sephadex G-100. The enzyme had a molecular weight of 45 490+/-3500 Da and Km values of 0.23, 1.14, 1.34, and 5.0 mM for the substrates caffeic acid, chlorogenic acid, 4-methylcatechol, and catechol, respectively. When assayed with resorcinol, DL-DOPA, pyrogallol, protocatechuic, p-coumaric, ferulic, and cinnamic acids, catechin, and quercetin, the PPO showed no activity. The optimum pH varied from 5.0 to 6.6, depending on substrate. PPO activity was inhibited by various phenolic and nonphenolic compounds. p-Coumaric and cinnamic acids showed competitive inhibition, with Ki values of 0.017 and 0.011 mM, respectively, using chlorogenic acid as substrate. Heat inactivation from 60 to 90 degrees C showed the enzyme to be relatively stable at 60-70 degrees C, with progressive inactivation when incubated at 80 and 90 degrees C. The Ea (apparent activation energy) for inactivation was 93.69 kJ mol-1. Sucrose, maltose, glucose, fructose, and trehalose at high concentrations appeared to protect yacon PPO against thermal inactivation at 75 and 80 degrees C.     

基因工程菌EGs2产β-葡聚糖酶条件优化及产酶特性

摘要：用乳清粉作为主要培养基组成，采用正交试验对重组菌EGs2的发酵条件进行了优化，并对粗酶液的酶学性质进行了研究。重组菌EGs2的最佳发酵条件为：摇床转速170 r•min-1，接种量1 ％，发酵培养基初始pH值6.0，种龄12 h。重组菌EGs2β－葡聚糖酶的表达与菌体生长呈正相关，发酵14h后，菌体生物量最高可达1.71 g•L -1，β－葡聚糖酶活力最高可达321.56 U•ml-1。所得粗酶液的最适反应温度和pH值分别为60 ℃和6.0，在70 ℃以下保温20 min后，残余酶活力均在80 %以上。在pH 5.0-9.0 放置48 h后仍能保持均90 %以上的残余酶活力。     

Gene cloning, expression, and biochemical characterization of a recombinant trehalose synthase from Picrophilus torridus in Escherichia coli

A trehalose synthase (TSase) gene from a hyperacidophilic, thermophilic archaea, Picrophilus torridus, was synthesized using overlap extension PCR and transformed into Escherichia coli for expression. The purified recombinant P. torridus TSase (PTTS) showed an optimum pH and temperature of 6.0 and 45 degrees C, respectively, and the enzyme maintained high activity at pH 5.0 and 60 degrees C. Kinetic analysis showed that the enzyme has a 2.5-fold higher catalytic efficiency (k(cat)/K(M)) for maltose than for trehalose, indicating maltose as the preferred substrate. The maximum conversion rate of maltose into trehalose by the enzyme was independent of the substrate concentration, tended to increase at lower temperatures, and reached approximately 71% at 20 degrees C. Enzyme activity was inhibited by Hg2+, Al3+, and SDS. Five amino acid residues that are important for alpha-amylase family enzyme catalysis were shown to be conserved in PTTS (Asp203, Glu245, Asp311, His106, and His310) and required for its activity, suggesting this enzyme might employ a similar hydrolysis mechanism.     

Comparative study on pressure and temperature stability of 5-methyltetrahydrofolic acid in model systems and in food products

A comparative study on the pressure and temperature stability of 5-methyltetrahydrofolic acid (5-CH(3)-H(4)folate) was performed in model/buffer systems and food products (i.e., orange juice, kiwi puree, carrot juice, and asparagus). Effects of pH and ascorbic acid (0.5 mg/g) on 5-CH(3)-H(4)folate stability in buffer systems were studied on a kinetic basis at different temperatures (from 65 to 160 degrees C) and different pressure/temperature combinations (from 100 to 700 MPa/from 20 to 65 degrees C). These studies showed that (i) the degradation of 5-CH(3)-H(4)folate in all model systems could be described by first-order reaction kinetics, (ii) the thermostability of 5-CH(3)-H(4)folate was enhanced by increasing pH up to 7, (iii) 5-CH(3)-H(4)folate was relatively pressure stable at temperatures lower than 40 degrees C, and (iv) ascorbic acid enhanced both the thermo- and barostabilities of 5-CH(3)-H(4)folate. In food products, temperature and pressure stabilities of 5-CH(3)-H(4)folate were studied at different temperatures (70-120 degrees C) and different pressure/temperature combinations (from 50 to 200 MPa/25 degrees C and 500 MPa/60 degrees C). 5-CH(3)-H(4)folate in orange juice and kiwi puree was relatively temperature (up to 120 degrees C) and pressure (up to 500 MPa/60 degrees C) stable in contrast to carrot juice and asparagus. Addition of ascorbic acid (0.5 mg/g) in carrot juice resulted in a remarkable protective effect on pressure (500 MPa/60 degrees C/40 min) and temperature degradation (120 degrees C/40 min) of 5-CH(3)-H(4)folate.     

Influence of sucrose on the thermal denaturation, gelation, and emulsion stabilization of whey proteins

The influence of sucrose (0-40 wt %) on the thermal denaturation and functionality of whey protein isolate (WPI) solutions has been studied. The effect of sucrose on the heat denaturation of 0.2 wt % WPI solutions (pH 7.0) was measured using differential scanning calorimetry. Sucrose increased the temperature at which protein denaturation occurred, for example, by 6-8 degrees C for 40 wt % sucrose. The dynamic shear rheology of 10 wt % WPI solutions (pH 7.0, 100 mM NaCl) was monitored as they were heated from 30 to 90 degrees C and then cooled to 30 degrees C. Sucrose increased the gelation temperature and the final rigidity of the cooled gels. The degree of flocculation in 10 wt % oil-in-water emulsions stabilized by 1 wt % WPI (pH 7.0, 100 mM NaCl) was measured using a light scattering technique after they were heated at fixed temperatures from 30 to 90 degrees C for 15 min and then cooled to 30 degrees C. Sucrose increased the temperature at which maximum flocculation was observed and increased the extent of droplet flocculation. These results are interpreted in terms of the influence of sucrose on the thermal unfolding and aggregation of protein molecules.     

Identification and quantitation of key aroma compounds formed in Maillard-type reactions of fructose with cysteamine or isothiaproline (1,3-thiazolidine-2-carboxylic acid)

Fructose was reacted in the presence of either cysteamine (model A) or isothiaproline (model B) in aqueous buffer at 145 degrees C and pH 7.0. Application of an aroma extract dilution analysis on the bulk of the volatile compounds formed in model A revealed 5-acetyl-3,4-dihydro-2H-1,4-thiazine (19), N-(2-mercaptoethyl)-1,3-thiazolidine (16), 4-hydroxy-2,5-dimethyl-3(2H)-furanone (15), and 2-acetyl-2-thiazoline (11) as the key aroma compounds among the 10 odorants detected. A similar set of aroma compounds was formed when isothiaproline was reacted (model B), but the flavor dilution factors were generally lower. Substitution of the buffer by silica gel/water (9 + 1 w/w) in both models and application of 150 degrees C for 10 min also gave the same key odorants from both thio compounds; however, under these conditions isothiaproline was the better precursor of, in particular, 19 and 11. Quantitative measurements performed by means of stable isotope dilution assays revealed a significant effect of the pH on odorant formation. For example, in model A, formation of 19 as well as of 11 was suppressed at pH values <5.0. A clear maximum was, however, found for 19 at pH 7.0 (approximately 1 mol % yield), whereas 11 increased with increasing pH from 7.0 to 9.0.     

Activity and process stability of purified green pepper (Capsicum annuum) pectin methylesterase

Pectin methylesterase (PME) from green bell peppers (Capsicum annuum) was extracted and purified by affinity chromatography on a CNBr-Sepharose-PMEI column. A single protein peak with pectin methylesterase activity was observed. For the pepper PME, a biochemical characterization in terms of molar mass (MM), isoelectric points (pI), and kinetic parameters for activity and thermostability was performed. The optimum pH for PME activity at 22 degrees C was 7.5, and its optimum temperature at neutral pH was between 52.5 and 55.0 degrees C. The purified pepper PME required the presence of 0.13 M NaCl for optimum activity. Isothermal inactivation of purified pepper PME in 20 mM Tris buffer (pH 7.5) could be described by a fractional conversion model for lower temperatures (55-57 degrees C) and a biphasic model for higher temperatures (58-70 degrees C). The enzyme showed a stable behavior toward high-pressure/temperature treatments.     

Extraction and characterization of oil bodies from soy beans: a natural source of pre-emulsified soybean oil

Soybeans contain oil bodies that are coated by a layer of oleosin proteins. In nature, this protein coating protects the oil bodies from environmental stresses and may be utilized by food manufacturers for the same purpose. In this study, oil bodies were extracted from soybean using an aqueous extraction method that involved blending, dispersion (pH 8.6), filtration, and centrifugation steps. The influence of NaCl (0-250 mM), thermal processing (30-90 degrees C, 20 min) and pH (2-8) on the properties and stability of the oil bodies was analyzed using zeta-potential, particle size, and creaming stability measurements. The extracted oil bodies were relatively small ( d 32 approximately 250 nm), and their zeta-potential went from around +12 mV to -20 mV as the pH was increased from 2 to 8, with an isoelectric point around pH 4. The oil bodies were stable to aggregation and creaming at low (pH = 2) and high (pH >/= 6) pH values but were unstable at intermediate values (3 相似文献   

Partial purification and characterization of polyphenol oxidase from banana (Musa sapientum L.) peel

Polyphenol oxidase (EC 1.10.3.1, o-diphenol: oxygen oxidoreductase, PPO) of banana (Musa sapientum L.) peel was partially purified about 460-fold with a recovery of 2.2% using dopamine as substrate. The enzyme showed a single peak on Toyopearl HW55-S chromatography. However, two bands were detected by staining with Coomassie brilliant blue on PAGE: one was very clear, and the other was faint. Molecular weight for purified PPO was estimated to be about 41 000 by gel filtration. The enzyme quickly oxidized dopamine, and its Km value (Michaelis constant) for dopamine was 3.9 mM. Optimum pH was 6.5 and the PPO activity was quite stable in the range of pH 5-11 for 48 h. The enzyme had an optimum temperature at 30 degrees C and was stable up to 60 degrees C after heat treatment for 30 min. The enzyme activity was strongly inhibited by sodium diethyldithiocarbamate, potassium cyanide, L-ascorbic acid, and cysteine at 1 mM. Under a low buffer capacity, the enzyme was also strongly inhibited by citric acid and acetic acid at 10 mM.     

Purification and characterization of a lipoxygenase enzyme from durum wheat semolina.

Purification of a lipoxygenase enzyme from the cultivar Tresor of durum wheat semolina (Triticum turgidum var. durum Desf) was reinvestigated furnishing a new procedure. The 895-fold purified homogeneous enzyme showed a monomeric structure with a molecular mass of 95 +/- 5 kDa. Among the substrates tested, linoleic acid showed the highest k(cat)/K(m) value; a beta-carotene bleaching activity was also detected. The enzyme optimal activity was at pH 6. 8 on linoleic acid as substrate and at pH 5.2 for the bleaching activity on beta-carotene, both assayed at 25 degrees C. The dependence of lipoxygenase activity on temperature showed a maximum at 40 degrees C for linoleic acid and at 60 degrees C for bleaching activity on beta-carotene. The amino acid composition showed the presence of only one tryptophan residue per monomer. Far-UV circular dichroism studies carried out at 25 degrees C in acidic, neutral, and basic regions revealed that the protein possesses a secondary structure content with a high percentage of alpha- and beta-structures. Near-UV circular dichroism, at 25 degrees C and at the same pH values, pointed out a strong perturbation of the tertiary structure in the acidic and basic regions compared to the neutral pH condition. Moreover, far-UV CD spectra studying the effects of the temperature on alpha-helix content revealed that the melting point of the alpha-helix is at 60 degrees C at pH 5.0, whereas it was at 50 degrees C at pH 6.8 and 9.0. The NH(2)-terminal sequence allowed a homology comparison with other lipoxygenase sequences from mammalian and vegetable sources.     

Purification and characterization of a cysteine protease inhibitor from chum salmon (Oncorhynchus keta) plasma

A cysteine protease inhibitor (CPI) in chum salmon ( Oncorhynchus keta) plasma (CSP) was detected after performing inhibitory activity staining against papain under nonreducing condition. The CPI was purified from CSP by affinity chromatography with a yield and purification ratio of 0.94% and 30.36-fold, respectively. CSP CPI had a molecular mass of 70 kDa based on the results of SDS-PAGE and Sephacryl S-100 gel filtration. CSP CPI was a glycoprotein based on the periodic acid-Schiff (PAS) staining of the SDS-PAGE gel and classified as a kininogen. CSP CPI was stable in the pH range of 6.0-9.0 with maximal stability at pH 7.0. CSP CPI presented thermal stability at temperatures below 50 degrees C and exhibited maximal activity at temperatures of 20-40 degrees C. CSP CPI was determined to be a noncompetitive inhibitor against papain, with an inhibitor constant (Ki) of 105 nM.