The effect of varying the number of drills per plot and the amount of replication on the efficiency of potato yield trials

Summary The effect on yield trials of altering plot size was examined by investigating plots with varying numbers of drills (each with six tubers) planted. No evidence was found of the ware yield per drill being affected by different plot sizes nor any effect attributable to neighbouring drills, whether these were planted with another clone or left unplanted. Increasing the number of drills per plot did increase the precision of the estimated clone means as did, of course, increasing the number of replicates. It appeared, however, that increasing the number of replicates was a more efficient way to increase precision. Thus it was concluded that the most efficient utilization of limited planting space was to grow single drill plots with maximum replication.     

Variation in resistance level of potato genotypes and virulence level of potato cyst nematode populations

Summary In two experiments, using different testing methods, the number of newly formed cysts was determined on nine potato genotypes with resistance from various sources. Ten potato cyst nematode (PCN) populations were used in these experiments. Rank correlation between numbers of cysts over potato genotype-PCN population combinations for both experiments was high (r_s = 0.90). Dendrograms for PCN populations and potato genotypes were constructed, based on a simultaneous hierarchical clustering procedure for potato genotype-PCN population interaction terms. Several virulence groups could be identified within Globodera rostochiensis as well as within G. pallida. Host genotypes, derived from the same sources of resistance, were clustered in different resistance groups.     

Analysing genotype by environment interaction in Dutch potato variety trials using factorial regression

Summary Genotype by environment interaction was investigated for yield data from the official Dutch Variety List trials for potato. The data set included 64 genotypes by 26 environments, where environments consisted of year by soil type combinations. Factorial regression models incorporating genotypic and environmental covariates in the interaction were used to analyse the data. The merits of factorial regression models were compared with those of biadditive models. Factorial regression models and biadditive models described comparable amounts of interaction, but factorial regression models provided a better basis for biological interpreration of the interaction.This article was previously published in Euphytica 82: 149–155.     

Analysing genotype by environment interaction in Dutch potato variety trials using factorial regression

Summary Genotype by environment interaction was investigated for yield data from the official Dutch Variety List trials for potato. The data set included 64 genotypes by 26 environments, where environments consisted of year by soil type combinations. Factorial regression models incorporating genotypic and environmental covariates in the interaction were used to analyse the data. The merits of factorial regression models were compared with those of biadditive models. Factorial regression models and biadditive models described comparable amounts of interaction, but factorial regression models provided a better basis for biological interpretation of the interaction.     

Chilean potato germplasm with resistance to potato viruses Y and S

Summary Four clones of the Chilota Potato Collection from the germplasm bank of the Universidad Austral de Chile, with potential combined resistance to PVX, PVY and PVS, were mechanically inoculated with these viruses in order to demonstrate wether they were truly resistant or not. Virus coat protein in the inoculated clones was determined by means of NCM-ELISA, DAS-ELISA, Western Blot and NASH.Two of the four inoculated clones were resistant to both PVY and PVS. This information will allow the utilization of these two clones in plant breeding programs.Abbreviations NCM-ELISA Nitrocellulose membrane enzyme-linked immunosorbent assay - DAS-ELISA double antibody sandwich enzyme-linked immunosorbent assay - NASH nucleic acid spot hybridization     

Analysis of dihaploid induction and production ability and seed parent x pollinator interaction in potato

Summary The production of dihaploids is the first step in a potato breeding program at the diploid level. Dihaploid induction ability, dihaploid production ability and seed parent x pollinator interaction were analyzed for 28 × 3, seed parent x pollinator combinations. This is the first report on significant interaction between seed parents and pollinators. Despite this interaction, IVP 101 had a significantly higher dihaploid induction ability than the widely used pollinators IVP 35 and IVP 48. Previous findings on significant differences in dihaploid production ability between seed parents were clearly confirmed.     

Genetics of self-compatibility in dihaploids of Solanum tuberosum L. 5. The S-genotype of tetraploid potato cultivar gineke

Summary Investigations of the genetics of self-compatibility and self-incompatibility in dihaploids and diploid derivatives from cv. Gineke revealed the presence of S ₁, S₂ and S ₃ at the S-locus of Gineke and in addition an S ₁-allele on a translocation. By means of a complete tester set involving the S-alleles S ₁, S₂ and S ₃ (all from Gineke) and S ₄ (from Black 4495) it was demonstrated that some Gineke dihaploids were compatible with all six testers. This indicated a fourth S-allele in Gineke, which differs from those in the tester series and was therefore assigned S ₅. Additional evidence was obtained from an analysis of F₁'s from crosses of two S ₅-bearing dihaploids and one of the testers. So the S-genotype of cv. Gineke was identified as S ₁S₂S₃S₅/S₁, the second S ₁ being the S-allele on a translocated fragment.     

Somaclonal variation in explant-derived potato clones over three tuber generations

Summary Tuber characteristics of potato clones (Solanum tuberosum L.) regenerated from cultured leaf, rachis or stem pieces of cv. Desiree were assessed in field trails over three years. In the first two seasons, when the crop was grown for seed potato production, tuber numbers and the tuber yields were normally distributed and the population means of the clones were about the same as those of the controls. When 78 of the clones were grown as a ware crop in a replicated field trial there were statistically significant differences between most clones and the controls in total yield (generally lower) and ware yield (generally higher), brought about by alterations of the size distributions of tubers. In all years the population of clones had fewer scab (Streptomyces scabies) lesions than the controls. Clones with consistent differences in flesh colour and eye depth were also observed. Two out of 78 clones, in 1984, had significantly higher dry matter content. No stable decrease in susceptibility to the cyst nematode Globodera pallida was observed amongst 167 clones tested. These potato plants regenerated from explants clearly show that somaclonal variation can include agronomically relevant changes.     

Production and performance of potato mini-tubers

Summary Production of mini-tubers as a source for seed potato was investigated by growing in soil micropropagated plants and micro-tubers produced from micropropagated plants. Cultures of several cultivars were initiated from indexed tubers and multiplied on modified MS medium. Cultures were micropropagated by using a modular system which allowed batch handling. Micropropagated plants produced mini-tubers in glasshouse after 70–115 days of growth in soil. A large proportion of the mini-tubers produced were between 9 and 15 mm diameter. Several factors, e.g., explant number, duration of in vitro culture and genotype influenced mini-tubers production. Micropropagated plants after culture of 86 days or longer produced micro-tubers ca. 2 to 10 mm diameter. Plants, which formed micro-tubers in vitro, produced less number of mini-tubers in soil. Micro-tubers produced 1 to 3 mini-tubers when grown in soil in chain-type paper pots, but produced conventional sized tubers when grown in soil under plastic polytunnel. Mini-tuber number varied widely between potato cultivars; cvs. Bintje and British Queen produced more mini-tubers than the other cultivars. Mini-tubers developed green hard skins when kept in light for 3 weeks, and could be stored in dark at 4° C upto 6 months. In a field trial, small mini-tubers ca. 5–10 mm diameter produced more but smaller tubers than mini-tubers ca. 15–20 mm diameter. The micropropagated plants and the plants grown from mini-tubers were genetically stable, and did not show any morphological aberrations except for one variegated plant among the several thousand produced. It is concluded that the production of mini-tubers by soil planting of micropropagated plants is a rapid and efficient method for producing seed potato tubers.The use of any trade mark and other commercial products mentioned in this paper does not constitute any recommendation or advertisement for such products on behalf of the Agriculture and Food Development Authority, Dublin, Ireland     

Studies on genetic divergence in potato

Summary Sixty-seven potato varieties/hybrids were grouped in 15 clusters on the basis of D² values. The clustering pattern was not influenced by the geographic diversity of the varieties. However, a segregation between varieties of the Tuberosum and Andigena type varieties was observed. The exotic potato varieties and also the Indian varieties bred from Tuberosums showed a poor divergence. In contrast, the divergence in the varieties developed from Tuberosum-Andigena crosses was much greater. The inter-cluster distance of such varieties, with respect to Tuberosum and Andigena clusters, appeared to be influenced by the cytoplasm they carried. The varieties with Tuberosum cytoplasm were closer to clusters having Tuberosum varieties and those with Andigena cytoplasm were closer to clusters having Andigena type varieties. The characters least influenced by the selection during the course of evolution of the present day varieties were found to be mainly responsible for adding divergence to the population. A breeding plan involving varieties from different clusters has been outlined.     

Correlations within and between characters between and within generations as a measure for the early generation selection in potato breeding

Summary The main objective was to determine the reliability of selection in early generations of a potato breeding programme. To that end data were recorded in the seedling generation, an early and a late harvested experiment of the first clonal generation and the late harvested second clonal generation on up to 30 genotypes of 55 populations from crosses of three Solanum tuberosum ssp. tuberosum cultivars and seven selected S. tuberosum ssp. andigena clones, adapted to the northern temperate zone. Phenotypic correlations were computed per population in almost all possible combinations within and between characters between and within generations. The mean across 55 comparable correlation coefficients was considered to be the best estimate of the relationship concerned.In all four experiments data were collected on number of tubers, tuber yield and mean tuber weight; in the three experiments of the two clonal generations in addition on date of emergence, number of stems, plant height, haulm type, and general impression of the underground plant parts and in the two late harvested clonal generations on date of maturity and under water weight.The results confirmed that general impression which is largely decisive for the selection in early generations, is a little reliable measure. However, from the magnitude of the mean correlations between experiments within characters it must be concluded that selection for most of these separate characters is hardly more reliable. An exception was date of maturity for which a mean correlation was determined of r=0.78 between the two clonal generations. The second strongest mean correlations, perhaps surprisingly, were for tuber yield, viz. r=0.52 between the seedling generation and the late harvested first as well as the second clonal generation and r=0.63 between the late harvested clonal generations. From the correlations between characters it appeared that for a high tuber yield, besides its components, in particular an early emergence, a large plant height, an attractive haulm type and a late maturity are of importance.The main conclusion is that, as long as not enough seed tubers are available for the layout of statistically sound experiments, a negative instead of a positive selection should be applied to avoid the rejection of most of the valuable genotypes in an early stage. On the basis of the results directives for the application of such a negative selection are given.     

The effect of seed tuber weight on characters in the first and the second clonal generation of potato populations

Summary Fifty-five populations from crosses of three Solanum tuberosum ssp. tuberosum cultivars and seven selected S. tuberosum ssp. andigena clones adapted to the northern temperate zone have been studied in the seedling and the first and second clonal generation. This paper only deals with the effect of seed tuber weight on various important agronomic characters which are selected for in early clonal generations, independently of the type of crosses.The results showed that a distinction has to be made between the effects of differences in seed tuber weight within and between seedlings, i.e. genotypes. The effects on the first clonal generation of differences in weight of the tubers within seedlings and those of the first heaviest tubers between seedlings were similar and comparable to seed tuber weight effects within cultivars. In contrast to the within seedlings effects the between seedlings effects proved to be heritable. This is concluded from the fact that, on average, independent of seed tuber weight seedlings with larger first heaviest tubers performed better in the second clonal generation than those with smaller ones. Notably plant height, general impression, date of maturity and particularly tuber yield and mean tuber weight in the second clonal generation were related to the weight of the first heaviest tubers of the seedlings. The potentialities of these findings for an early generation selection are discussed.     

Plant regeneration from callus culture in potato

Summary A procedure for plant regeneration from callus culture of potato, Solanum tuberosum L. is described. Calli were induced from 1–2 mm long shoot apices of potato cultivars Cara and A25/19 on half-strength Murashige and Skoog's medium (half-MS) supplemented with 3.2 mg IAA (indole-3-acetic acid), 1.0 mg kinetin (6-furfurylamino)purine], and 0.5 mg 2,4-D [2,4-dichlorophenoxy)acetic acid]/1. Sixty percent explants produced nodular calli on this medium within 30 days. Calli differentiated into shoot-primordia when subcultured on half-MS medium supplemented with 0.5 mg 2,4-D and 1.0 mg zeatin [6-(4-hydroxy-3-methybut-2 enylamino)amino purine]/1. Differentiated calli on half-MS medium without growth hormones produced complete plantlets which were cloned on the same medium and transferred into soil.     

Evaluation of seedling selection for salinity tolerance in potato (Solanum tuberosum L.)

Summary Salt-tolerance in potato (Solanum tuberosum L.) was selected on the basis of germination and survival of seed sown in trays of perlite suspended in either 75 or 150 mM NaCl. Salinity reduced the germination of seed. Genetic differences in salt-tolerance were apparent with salt reducing germination more in seed collected from cv. Cara than in that collected from cv. Maris Piper. Progeny from the seedling selection were then grown to maturity to produce tubers.The relative tolerance of the parental cultivars and of unselected and selected progeny to long-term exposure to salinity was examined in a pot experiment in which plants were irrigated with either fresh water or 50 mM NaCl solution from one week after plant emergence. In this experiment, salinity significantly reduced leaf conductance, total dry matter production and partitioning of assimilate to tubers. Salinity reduced dry matter production and assimilate partitioning to tubers to a greater extent in Cara than in M. Piper. Progeny selected for short-term salt-tolerance did not exhibit greater long-term salt-tolerance than unselected progeny, and both were more sensitive than M. Piper.These results demonstrate genetic variation in salt-tolerance in potato. However, although there was a correlation between the performance of the parent to long-term salinity and survival of progeny in the seedling selection, there was no correlation between short- and long-term salt-tolerance. This suggests that characters underlying short-term tolerance may contribute to long-term tolerance but do not of themselves confer long-term tolerance. Future progress in selecting for improved salt-tolerance depends on understanding the effects of salinity on the physiological processes underlying growth and carbon partitioning.     

Coagulable protein in potato: Screening method and prospects for breeding

Summary From tubers of 34 varieties of Solanum tuberosum, extracts were prepared and analysed for crude protein and coagulable protein by the Kjeldahl method. Content of coagulable protein was 0.37–1.24%. From the same material, juice was prepared with a juice centrifuge and analysed for coagulable protein by the Kjeldahl and microbiuret method. The average amount of coagulable protein in the juice was 81.8% of the total coagulable protein. The correlation coefficient between coagulable protein in the juice and total coagulable protein was 0.956. The correlation coefficient between Kjeldahl and microbiuret data for coagulable protein in the juice was 0.956. Analysis of tuber juice by the microbiuret method is recommended as a rapid screening technique for coagulable protein.Relationships between protein data of the 34 varieties and earliness, yield and content of dry matter were analysed statistically. Content of coagulable protein in fresh material correlated with content of dry matter (rs=–0.756), yield of fresh potatoes (r=–0.615) and earliness (r=–0.361) but not significantly with yield of dry matter (rs=–0.309). Coagulable protein in dry matter correlated with fresh yield (r=–0.525), but not significantly with content of dry matter (r=–0.260), yield of dry matter (r=–0.131) and earliness (r=–0.054). Path coefficient analysis showed that 67% of the variation in coagulable protein in fresh material was statistically determined by earliness, content of dry matter, fresh yield and content of uncoagulable protein in fresh material, whereas only 34% of the variation in content of coagulable protein in dry matter was determined by these components. A high content of coagulable protein in fresh or dry matter can be combined with early maturity and with high yield of dry matter. Coagulable protein in dry matter seems to be a more suitable criterion of selection than coagulable protein in fresh material.     

Female fertility of potato (Solanum tuberosum ssp. tuberosum) dihaploids

Summary Results of testcrosses and seed set data of the dihaploid breeding program at the Potato Research Institute in Gross Lüsewitz, Germany, indicate that the low level of female fertility could hinder success in crossing work. With the objective to reveal major components of female fertility, the behavior of 47 outstanding potato dihaploids (S. tuberosum ssp. tuberosum, 2n=2x=24) was assessed in testcrosses over a period of 3 years. Analysis of variance was carried out for the traits: number of seed per berry (S/B), number of intact seed per berry (IS/B), and number of non-germinable seed per berry (NGS/B). Significant sources of variation included cross combinations, years, and cross combination-year interactions. More than 20 S/B were obtained in 25.4% of all cross combinations performed over 3 years using up to three pollinators. Berry set was not correlated to seed set, but was in general determined by the pollinator used. The number of seedless berries (SLB/F) was related to neither total berry set nor seed production. The trait S/B remained stable over different years, and thus it deemed to be most useful as a measure of the level of female fertility in practical breeding work. Selection for female fertility in early generations of a breeding program is recommended to avoid limitations in the production of variability via sexual recombination.     

A comparison between single plant plots and five plant plots for the initial selection stage of a potato breeding programme

Summary The efficiency of single plant selection in the initial selection stage of a potato breeding programme was examined. A random sample of potato clones was grown in single plant plots and also in tworeplicates of five plant plots. After harvest, each plot was visually assessed by three potato breeders; total tuber weight and number of tubers per plant were also recorded, from which mean tuber weight was calculated. The error variances of the single plant plots were found to be significantly greater than from the five plant plots for total tuber weight, mean tuber weight and number of tubers per plant, but not significantly different for breeders' preference. Coefficients of correlation between single and five plants plots were significantly greater than zero for all traits examined, but they were lower than the corresponding correlations between the two replicates of five plant plots. Although a random sample of clones was examined, each clone had been assessed for breeders' preference the previous year. When the clones were grouped according to the previous years preference scores, it was found that the correlation coefficients between single and five plant plots for breeders' preference were inversely related, in magnitude, to the mean preference score of each group. It was concluded that single plant selection was generally ineffective, particularly when only the better clones, from the previous years assessment, are examined.     

Transgenic potato plants resistant to viruses

Summary Traditional potato breeding is a laborious process in which, by intercrossing, valuable traits from different parental clones are combined in a progeny genotype. Depending on the availability of genes, molecular techniques can be used to add specific genes to existing cultivars that, although otherwise satisfactory, lack a lew commercially important traits. For virus resistance the gene for the coat protein of a given virus transplanted into the genome of the plant renders the plant resistant to that virus. In conferring such resistance to potato varieties it proved to be possible to preserve their intrinsic properties.     

A breeding method for accelerated development of cold chipping clones in potato

Summary The development of potato cultivars having acceptable chipping quality after cold storage is important because it reduces costs to growers while ensuring continuity of supply to processors throughout the year. Over 5100 single-hill progenies were planted to select for cold chippers. A breeding procedure for selecting and evaluating these progenies for cold chipping ability was used, and 38 desirable genotypes were identified. These selections were increased in the second clonal generation and evaluated for yield, specific gravity, and seven chipping treatments of varying storage duration/temperature/reconditioning duration and were compared to standard chipping cultivars Atlantic, Monona, Norchip, and Snowden. Twenty-two selections yielded Norchip the highest yielding cultivar, while 15 selections had a specific gravity Atlantic, the highest specific gravity cultivar. Snowden was the best chipping cultivar overall and some selections were not significantly different than Snowden. Overall, nine selections combined high yield and specific gravity with the ability to produce attractive chips from 4° C. Single-hill selection for cold chipping could potentially save four years in the breeding process by the identification of good parents, the recycling of good parental cross combinations, and the evaluation of progeny for chipping earlier in the breeding program.     

Relations between biomass maintenance of potato clones and the growth and yield of their progeny seedlings at low temperatures

Summary The main purpose of the research reported in this article was to see if the biomass maintenance of parental potato clones was correlated with the growth and yield of their progeny. Seedling populations with parents of European and of Andean origin were cultivated at a temperature of 10°C during the day and 4°C at night. The biomass maintenance of the parents was defined as the ratio between the total biomass yield at 20°C day/10°C night and the total biomass yield at 10° C day/4°C night. The Andean parents had good maintenance ability at the lower regime compared to the Eurpean parents.Biomass maintenance appears to be hereditary. Significant correlation was found between the dry matter maintenance of the parents and the growth rate of seedlings, especially during the second month after potting. In populations with only Andean or only European parents, differences in height increase and leaf formation rate between seedling populations were correlated to the dry matter maintenance of the parents cultivated at the temperature regime 10/4°C. In the hybrid population between an Andean and an European parent only differences in height increase during the second month after potting correlated well to the average dry matter maintenance of the parents. It appears therefore that the rate of height increase during the second month after potting can be used as a criterion for selection.