Theoretical Analysis on 13-Bit Lattice Gas Automata Model with Poly-velocity and its Simulation

An 13 bit lattice gas automata model has been investigated from fluid discrete dynamics. By gaining the moment equations from lattice Boltzmann equation and using Chapman Enskog expansion, the fluid dynamics equation and energy equation of 13 bit lattice gas automata model with polyvelocity have been deduced. The validity of the model using for non isothermal fluid dynamics has been proved . Finally, simulation results for non isothermal flow pass plate have been shown     

Advance in Mathematic Model of Solidification Heat Transfer Process in Continuous Casting

The mathematic model of solidification heat transfer process in continuous casting strand is useful for quantitatively analyzing heat transfer in continuous casting process, quality control and process control. The heat transfer in continuous cast strand in crystallizer and secondary cooling zone have been analyzed. The attention has been paid to basic logic and methodology in model building up. Typical methods determing solution condition and parameters for the model have been discussed. Some numerical methods at the present time for solving solidification heat transfer model, such as finite difference method, finite-element method and boundary element, have been investigated comparatively. In the future, working on solidification heat transfer model, which is more practical, and the integration of the control model will play an important role in the development of high efficiency continuous casting technology.     

Dynamic Modeling and Simulation of 440 t/h Steam-cooled Cyclone Separator for CFB Boiler

A dynamic mathematical model of the steam-cooled cyclone separator in a 440 t/h CFB boiler has been established.Based on the mathematical model,simulation model of the cyclone separator is created with the advanced continuous simulation language(ACSL).The validity of this model has been verified by the simulation experiments and analysis.This model can provide a theoretical guidance for operation and optimal design of the cyclone separator.     

A Three Dimensional Torso Model for the Numerical Simulation of ECG--Forward Problem of ECG(1)

In this paper,a numerical model of a three dimensional human torso has been presented.In this model,the torso part including anisotropic muscle layers has been discretized by means of the finite element method(FEM).The rest of torso have been divided into the surface elements by the boundary element method(BEM).This discretized model can be used in the field such as the forward problem and the inverse problem of the electrocardiogram(ECG).     

Performance Simulation of EHE for 300MW CFB

With the development of circulating fluidized bed boiler(CFB),the study field of external heat exchanger(EHE) is greater in extent and degree.In order to research the working process of EHE,the model which deals with flow and heat transfer of EHE for 300MW CFB of Dong Fang Boiler Grou PCo.Ltd.is presented.Based on the cell modeling theory,the EHE is divided into several chamber by heating surfaces.The mass and energy conservation equations of each cell have been developed according to some reasonable assumption.The complete mathematical model has been compiled by Fortran and solved by classical Algorithm of Runge-Kutta.The static test and perturbation experiment of simulating model has been performed.The simulation results show that the model has been reached the steady state rapidly,the dynamic responses are reasonable and the modeling presented in the paper is reliable and appropriate.     

基于知识模型的作物适应性评价专家系统设计

系统引入了知识模型概念,建立了以知识模型为特征的知识系统,将知识工程、数据库有机结合,采用正向与反向相结合的推理控制策略,建立了基于知识模型的作物适应性评价专家系统,实现了作物适应性评价的计算机辅助决策,具有较强的跟踪解释能力。用本系统对江苏省地区小麦适应性还进行了实例分析。     

On the New Blade Shape of the Turodrill and Its CAD

Based on the research on the motion law of the drilling fluid along the blade, the necessary condition of the blade shape for a high efficiency turbodrill is obtained. Hence a mathematical model how to design a blade shape has been put forward, and the solution method of the model is obtained, which helps to design a high efficiency turbodrill. What's more, a 3 dimension model of the blade has been set up using Pro/E software, which can link with the advanced computer language by a interface routine and modify the 3-D blade model automatically. Based on the theory, a software has been compiled to design the blade automatically, which can improve the design efficiency and the design quality of the turbodrill.     

STUDY OF DIGITAL SIMULATION MODEL FOR THE MAGNETIZING CHARACTERISTIC OF REACTANCE TRANSFORMER

Based on the experiment, magnetizing characteristic and its mathematical model of iron for the reactance transformer DKB has been studied in this paper. Its simulating calculation model has been achieved and implemented by program. The result of the simulation is satisfactory compared with that of the experiment.     

Mathematical Model of Selective Catalytic Reaction of Nox in Reactor and Its Simulation

As the domestic technology of selective catalytic reduction(SCR) has not been mature.A assembled-parameter dynamic mathematical model is established for the primary chemistry reaction process in SCR reactor.The mass balance equation of the NH3 adsorption-desorption on the catalyzer surface and six gas components,and total energy balance equation in SCR reactor are set up respectively.A dynamic simulation model has developed by using MATLAB simulation tool.The steady calculation for model is carried on.Based on the established dynamic simulation model,two dynamic simulation experiments have been done,which include the simulation experiment of step disturbance about NOx concentration and temperature.The simulation results current is correctl.The analyzed results indicate that the established dynamic mathematical model for SCR reactor is credible,and prove that the simulation model is practical.     

基于隔离布防护区的水稻冠层上方风速水平分布模式

为了确定隔离布防护转基因水稻基因漂流效果,设计了隔离布防护措施的田间试验,利用试验观测资料,根据隔离布防护区的风速分布特征,建立迎、背风防护区风速分布模式,并通过实测资料检验模式的适用性。结果表明：经检验效果较好。背风面各模式的相关系数均在0.95以上,但是模型系数a因观测高度和风向角的不同而存在着一定差异;迎风面模式模拟值与实测值之间的相对误差平均小于10%。但是,本研究所建模式具有局限性,适用范围非常有限。     

“食品分析”实验课教学模式的改革探索

“食品分析”课程是一门技能性、实践性、科学性很强的专业基础课,传统的教学模式已经不能适应时代发展的需要。因此,教学团队对该课程的实验课进行了教学模式的改革与实践探索。经过2年的实践证明,“食品分析”课程改革有效促进了学生的学习兴趣和积极性,评定学生的学习成绩更加合理,获得了较好的教学效果,进一步提高了学生的培养质量。     

Two Optimization Methods for Portfolio Investment Decision

On the basis of introducing some fundamental theories and computational methods of portfolio investment, this paper derives a decision model for searching optimal portfolio with the utility function. Then,after comparing the new model with the conditional extreme optimization model,which has been usually considered by people,the result shows the new model would be more efficient under certain conditions.     

Modeling of the Break Simulation for Both Single and Two Phase Conditions

Based on the Moody model and complied with the modular modeling ideology and principle,a general break simulation model has been proposed for both single and two phase conditions in a thermal liquid pipe.This model now is used to develop the training simulator a power plant.     

Calculation of the Thermodynamic Properties of Mg-Zn Alloy

Getting activity of component is an important aspect of researching the thermodynamic characters of alloy. Under each model of predicting the thermodynamics characters of alloy, Miedema model has been developing as comparatively a good and accurate model in recent years. In this work, the formation enthalpy of Mg - Zn alloy has been calculated, according to the Miedema model. Further, the activity curve of Zn in Mg - Zn alloy at 1 000 K is calculated. The calculating result is that, as the formation enthalpy of Mg - Zn alloy is small, and in the procedure of calculating activity, excess entropy attributes a lot to the result, after considering excess entropy, calculating results and experimental values match each other very well.     

THE PRECISE SOLUTION OF MATHEMATICAL MODEL FOR TWO-STEP CARBURIZATION TREATMENT

The precise solution of mathematical model for two-step carburigation has been induced which is under the condition of the third boundary. This solution has been compared with the finite difference technique and its correctness and practicality have been proved.     

A Time-effect Model for Concrete Compressive Strength under Sustained Load

Based on the existed stress-strain curve of concrete prism under one-off short-term load and the concrete creep model, a new time-effect model for evaluation of concrete compressive strength is established through the synthesis of the concrete creep attenuating effect under sustained load and the concrete strength enhancing effect by age, a corresponding computer program has been developed. The computation of related indices and their change rules of several different-grade concrete materials with the program was carried out and the results were compared with experimental data and finite element numerical results reported in the literature, the reasonableness and practicality of the proposed new model have been verified.     

基于知识模型和GIS的棉花生产潜力评价系统

引入知识模型概念,建立以棉花生产潜力知识模型为特征的知识系统,将知识工程和数据库有机结合,以 Mapinfo 5.5 为系统开发平台,利用 MapBasic和 Visual Basic程序设计语言,建立基于知识模型的棉花生产潜力评价系统,实现棉花生产潜力评价的计算机辅助决策。应用本系统对江苏地区棉花生产潜力进行实例评价,并与实际单产相比较,进行单产潜力、潜力系数和总产潜力的对比分析,确定棉花生产地域优势。     

COMPUTER ANIMATED DISPLAY AND ITS APPLICATION IN MODAL ANALYSIS

This paper expounds a method of realizing animated display of structure model by computer animation at the request of test model analysis. The following problem have been discussed. They are the construction of structural geometric model,data processing and interchanging, two dimensional graphical display of three dimensional structure and the generation of computer animation.     

Application of 0-1 Linear Programming in Investment Combination in Enterprise

The optimal model of investment combination has been constructed with 0-1 linear programming. The subject-to equations of the model are also discussed, and the solution of investment combination is acquired through special software. A case study demonstrates that the model of investment combination can effectively resolve the decision of annual planning of investment items in enterprise.     

粮油食品特色专业毕业设计(论文)新型模式质量评价体系

粮油食品特色专业始终重视毕业设计(论文)模式的创新,结合学科优势及支撑平台,进行毕业设计(论文)创新模式的研究和探索,取得了明显成效。为顺应时代发展及社会对高素质应用型人才的要求,培养造就创新型人才,强化毕业设计(论文)的模式创新,对建立的"粮油食品特色专业毕业设计(论文)"两种新型模式制定了成绩评价标准,有利于各个环节成绩的量化,更客观地对学生的毕业设计(论文)进行评价。